! Started logfile: J1217+3007_S_2017_05_27_pus_uvs.log on Fri May 3 11:05:36 2019 obs J1217+3007_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1217+3007_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.891667 visibilities/baseline/integration-bin. ! Found source: J1217+3007 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 1284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1217+3007_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.796167Jy sigma=0.007389 ! Fit after self-cal, rms=0.793792Jy sigma=0.007367 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.719 mas, bpa=21.69 degrees ! Estimated noise=2763.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159062 Jy ! Component: 100 - total flux cleaned = 0.196318 Jy ! Total flux subtracted in 100 components = 0.196318 Jy ! Clean residual min=-0.010993 max=0.014540 Jy/beam ! Clean residual mean=-0.000015 rms=0.003056 Jy/beam ! Combined flux in latest and established models = 0.196318 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.196318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083981Jy sigma=0.000741 ! Fit after self-cal, rms=0.083974Jy sigma=0.000741 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=8.334 mas, bpa=20.98 degrees ! Estimated noise=2404.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190716 Jy ! Component: 100 - total flux cleaned = 0.0289954 Jy ! Component: 150 - total flux cleaned = 0.0344262 Jy ! Component: 200 - total flux cleaned = 0.0365542 Jy ! Total flux subtracted in 200 components = 0.0365542 Jy ! Clean residual min=-0.006962 max=0.010665 Jy/beam ! Clean residual mean=-0.000008 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 0.232872 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.232872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079558Jy sigma=0.000702 ! Fit after self-cal, rms=0.079480Jy sigma=0.000701 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.92 HN 1.03 KP 0.99 ! LA 0.95 MK 0.99 NL 0.88 OV 1.07 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.05 KP 1.06 ! LA 0.98 MK 1.00 NL 1.04 OV 1.04 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 1.00 ! LA 0.96 MK 1.04 NL 0.99 OV 1.00 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.99 KP 1.00* ! LA 0.99 MK 1.15 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.079480Jy sigma=0.000701 ! Fit after self-cal, rms=0.077024Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.322 mas, bpa=21.1 degrees ! Estimated noise=2392.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270189 Jy ! Component: 100 - total flux cleaned = 0.000375778 Jy ! Component: 150 - total flux cleaned = 0.000317864 Jy ! Component: 200 - total flux cleaned = 0.000319094 Jy ! Total flux subtracted in 200 components = 0.000319094 Jy ! Clean residual min=-0.006258 max=0.010053 Jy/beam ! Clean residual mean=0.000013 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.233191 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.233191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076858Jy sigma=0.000683 ! Fit after self-cal, rms=0.076845Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076845Jy sigma=0.000683 ! Fit after self-cal, rms=0.076899Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=8.318 mas, bpa=21.1 degrees ! Estimated noise=2394.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110262 Jy ! Component: 100 - total flux cleaned = 0.000158469 Jy ! Component: 150 - total flux cleaned = 0.000123115 Jy ! Component: 200 - total flux cleaned = 0.000178066 Jy ! Total flux subtracted in 200 components = 0.000178066 Jy ! Clean residual min=-0.006223 max=0.010018 Jy/beam ! Clean residual mean=0.000014 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.233369 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.233369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076845Jy sigma=0.000682 ! Fit after self-cal, rms=0.076837Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915072 Jy ! Component: 100 - total flux cleaned = 0.0141825 Jy ! Component: 150 - total flux cleaned = 0.0169896 Jy ! Component: 200 - total flux cleaned = 0.0186473 Jy ! Total flux subtracted in 200 components = 0.0186473 Jy ! Clean residual min=-0.005135 max=0.005805 Jy/beam ! Clean residual mean=-0.000006 rms=0.001466 Jy/beam ! Combined flux in latest and established models = 0.252017 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 62 components and 0.252017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075735Jy sigma=0.000670 ! Fit after self-cal, rms=0.075694Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075694Jy sigma=0.000670 ! Fit after self-cal, rms=0.075504Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=8.334 mas, bpa=21.18 degrees ! Estimated noise=2386.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306757 Jy ! Component: 100 - total flux cleaned = 0.00355489 Jy ! Component: 150 - total flux cleaned = 0.00368772 Jy ! Component: 200 - total flux cleaned = 0.00352183 Jy ! Total flux subtracted in 200 components = 0.00352183 Jy ! Clean residual min=-0.004527 max=0.004993 Jy/beam ! Clean residual mean=-0.000000 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.255538 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.255538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075351Jy sigma=0.000667 ! Fit after self-cal, rms=0.075354Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345589 Jy ! Component: 100 - total flux cleaned = 0.000444087 Jy ! Component: 150 - total flux cleaned = 0.000399548 Jy ! Component: 200 - total flux cleaned = 0.000359218 Jy ! Total flux subtracted in 200 components = 0.000359218 Jy ! Clean residual min=-0.004435 max=0.005036 Jy/beam ! Clean residual mean=-0.000002 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.255898 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 95 components and 0.255898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075301Jy sigma=0.000667 ! Fit after self-cal, rms=0.075304Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075304Jy sigma=0.000667 ! Fit after self-cal, rms=0.075358Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.203 mas, bmaj=10.63 mas, bpa=9.199 degrees ! Estimated noise=2879.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327667 Jy ! Component: 100 - total flux cleaned = 0.000475307 Jy ! Component: 150 - total flux cleaned = 0.000592969 Jy ! Component: 200 - total flux cleaned = 0.000693003 Jy ! Total flux subtracted in 200 components = 0.000693003 Jy ! Clean residual min=-0.005769 max=0.005974 Jy/beam ! Clean residual mean=0.000002 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.256591 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 0.256591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075360Jy sigma=0.000667 ! Fit after self-cal, rms=0.075354Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369646 Jy ! Component: 100 - total flux cleaned = 0.000369846 Jy ! Component: 150 - total flux cleaned = 0.000319585 Jy ! Component: 200 - total flux cleaned = 0.000319926 Jy ! Total flux subtracted in 200 components = 0.000319926 Jy ! Clean residual min=-0.005713 max=0.005898 Jy/beam ! Clean residual mean=0.000001 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.256911 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.256911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075353Jy sigma=0.000667 ! Fit after self-cal, rms=0.075353Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=8.341 mas, bpa=21.2 degrees ! Estimated noise=2386.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 8.341 at 21.2 degrees (North through East) ! Clean map min=-0.0044542 max=0.20686 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=7.703 mas, bpa=21.88 degrees ! Estimated noise=2781.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159989 Jy ! Component: 100 - total flux cleaned = 0.196382 Jy ! Component: 150 - total flux cleaned = 0.211594 Jy ! Component: 200 - total flux cleaned = 0.220515 Jy ! Total flux subtracted in 200 components = 0.220515 Jy ! Clean residual min=-0.006909 max=0.007571 Jy/beam ! Clean residual mean=0.000006 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.220515 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.220515 Jy ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=8.341 mas, bpa=21.2 degrees ! Estimated noise=2386.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00882605 Jy ! Component: 100 - total flux cleaned = 0.0153796 Jy ! Component: 150 - total flux cleaned = 0.0201951 Jy ! Component: 200 - total flux cleaned = 0.0232601 Jy ! Total flux subtracted in 200 components = 0.0232601 Jy ! Clean residual min=-0.005168 max=0.006164 Jy/beam ! Clean residual mean=0.000003 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.243775 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 42 components and 0.243775 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.203 mas, bmaj=10.63 mas, bpa=9.199 degrees ! Estimated noise=2879.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518383 Jy ! Component: 100 - total flux cleaned = 0.00857391 Jy ! Component: 150 - total flux cleaned = 0.0100607 Jy ! Component: 200 - total flux cleaned = 0.0110045 Jy ! Total flux subtracted in 200 components = 0.0110045 Jy ! Clean residual min=-0.005888 max=0.006103 Jy/beam ! Clean residual mean=0.000001 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.25478 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.20423e-05 Jy ! Component: 100 - total flux cleaned = 0.000266851 Jy ! Component: 150 - total flux cleaned = 0.000439188 Jy ! Component: 200 - total flux cleaned = 0.000543478 Jy ! Total flux subtracted in 200 components = 0.000543478 Jy ! Clean residual min=-0.005766 max=0.005844 Jy/beam ! Clean residual mean=-0.000001 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.255323 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 96 components and 0.255323 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=8.341 mas, bpa=21.2 degrees ! Estimated noise=2386.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000604047 Jy ! Component: 100 - total flux cleaned = -0.00140161 Jy ! Component: 150 - total flux cleaned = -0.00147597 Jy ! Component: 200 - total flux cleaned = -0.00141625 Jy ! Total flux subtracted in 200 components = -0.00141625 Jy ! Clean residual min=-0.004854 max=0.005155 Jy/beam ! Clean residual mean=-0.000000 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.253907 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.253907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075426Jy sigma=0.000667 ! Fit after self-cal, rms=0.075419Jy sigma=0.000667 wmodel J1217+3007_S_2017_05_27_pus_map.mod ! Writing 115 model components to file: J1217+3007_S_2017_05_27_pus_map.mod wobs J1217+3007_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1217+3007_S_2017_05_27_pus_uvs.fits wwins J1217+3007_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1217+3007_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00098667 Jy ! Component: 100 - total flux cleaned = 0.00138438 Jy ! Component: 150 - total flux cleaned = 0.00175003 Jy ! Component: 200 - total flux cleaned = 0.00202602 Jy ! Component: 250 - total flux cleaned = 0.00215885 Jy ! Component: 300 - total flux cleaned = 0.002225 Jy ! Component: 350 - total flux cleaned = 0.00228615 Jy ! Component: 400 - total flux cleaned = 0.00204926 Jy ! Component: 450 - total flux cleaned = 0.00187842 Jy ! Component: 500 - total flux cleaned = 0.0016577 Jy ! Component: 550 - total flux cleaned = 0.00144434 Jy ! Component: 600 - total flux cleaned = 0.00128903 Jy ! Component: 650 - total flux cleaned = 0.00103591 Jy ! Component: 700 - total flux cleaned = 0.000937651 Jy ! Component: 750 - total flux cleaned = 0.000744386 Jy ! Component: 800 - total flux cleaned = 0.000790559 Jy ! Component: 850 - total flux cleaned = 0.000651512 Jy ! Component: 900 - total flux cleaned = 0.000606384 Jy ! Component: 950 - total flux cleaned = 0.000384883 Jy ! Component: 1000 - total flux cleaned = 0.000211282 Jy ! Component: 1050 - total flux cleaned = 4.08475e-05 Jy ! Component: 1100 - total flux cleaned = -4.22461e-05 Jy ! Component: 1150 - total flux cleaned = -0.000246623 Jy ! Component: 1200 - total flux cleaned = -0.000366191 Jy ! Component: 1250 - total flux cleaned = -0.00032666 Jy ! Component: 1300 - total flux cleaned = -0.000326565 Jy ! Component: 1350 - total flux cleaned = -0.000288803 Jy ! Component: 1400 - total flux cleaned = -0.000326759 Jy ! Component: 1450 - total flux cleaned = -0.00025326 Jy ! Component: 1500 - total flux cleaned = -0.000324994 Jy ! Component: 1550 - total flux cleaned = -0.00036003 Jy ! Component: 1600 - total flux cleaned = -0.000288349 Jy ! Component: 1650 - total flux cleaned = -0.000184326 Jy ! Component: 1700 - total flux cleaned = -0.000116001 Jy ! Component: 1750 - total flux cleaned = -0.0001161 Jy ! Component: 1800 - total flux cleaned = -0.000248356 Jy ! Component: 1850 - total flux cleaned = -0.000247484 Jy ! Component: 1900 - total flux cleaned = -0.000181758 Jy ! Component: 1950 - total flux cleaned = -0.00014992 Jy ! Component: 2000 - total flux cleaned = -0.000245418 Jy ! Component: 2050 - total flux cleaned = -0.000214553 Jy ! Component: 2100 - total flux cleaned = -0.000369115 Jy ! Component: 2150 - total flux cleaned = -0.000368513 Jy ! Component: 2200 - total flux cleaned = -0.000278381 Jy ! Component: 2250 - total flux cleaned = -0.000398397 Jy ! Component: 2300 - total flux cleaned = -0.000369594 Jy ! Component: 2350 - total flux cleaned = -0.000428132 Jy ! Component: 2400 - total flux cleaned = -0.000428092 Jy ! Component: 2450 - total flux cleaned = -0.00045676 Jy ! Component: 2500 - total flux cleaned = -0.000456571 Jy ! Component: 2550 - total flux cleaned = -0.000400444 Jy ! Component: 2600 - total flux cleaned = -0.000484421 Jy ! Component: 2650 - total flux cleaned = -0.000456614 Jy ! Component: 2700 - total flux cleaned = -0.000347078 Jy ! Component: 2750 - total flux cleaned = -0.000428812 Jy ! Component: 2800 - total flux cleaned = -0.000348314 Jy ! Component: 2850 - total flux cleaned = -0.000348782 Jy ! Component: 2900 - total flux cleaned = -0.000322242 Jy ! Component: 2950 - total flux cleaned = -0.00029584 Jy ! Component: 3000 - total flux cleaned = -0.000269793 Jy ! Component: 3050 - total flux cleaned = -0.000217771 Jy ! Component: 3100 - total flux cleaned = -0.000140912 Jy ! Component: 3150 - total flux cleaned = -0.000115497 Jy ! Component: 3200 - total flux cleaned = -9.01498e-05 Jy ! Component: 3250 - total flux cleaned = -0.000190912 Jy ! Component: 3300 - total flux cleaned = -0.000115585 Jy ! Component: 3350 - total flux cleaned = -0.000190191 Jy ! Component: 3400 - total flux cleaned = -0.000140752 Jy ! Component: 3450 - total flux cleaned = -0.000140798 Jy ! Component: 3500 - total flux cleaned = -0.000189414 Jy ! Component: 3550 - total flux cleaned = -0.000165048 Jy ! Component: 3600 - total flux cleaned = -0.000165231 Jy ! Component: 3650 - total flux cleaned = -0.000165136 Jy ! Component: 3700 - total flux cleaned = -6.93659e-05 Jy ! Component: 3750 - total flux cleaned = -4.56311e-05 Jy ! Component: 3800 - total flux cleaned = -6.92419e-05 Jy ! Component: 3850 - total flux cleaned = 4.86049e-05 Jy ! Component: 3900 - total flux cleaned = 9.54479e-05 Jy ! Component: 3950 - total flux cleaned = 0.000118809 Jy ! Component: 4000 - total flux cleaned = 0.000188506 Jy ! Component: 4050 - total flux cleaned = 0.000165437 Jy ! Total flux subtracted in 4096 components = 0.0003037 Jy ! Clean residual min=-0.001154 max=0.001381 Jy/beam ! Clean residual mean=-0.000004 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.25421 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 382 components and 0.25421 Jy ![Exited script file: muppet] wmap "J1217+3007_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 8.341 at 21.2 degrees (North through East) ! Clean map min=-0.0032217 max=0.20636 Jy/beam ! Writing clean map to FITS file: J1217+3007_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.206361 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000405113 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.588937 0.588937 1.17787 2.35575 4.7115 9.423 18.846 37.692 75.384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.206 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 8.341 at 21.2 degrees (North through East) ! Clean map min=-0.0032217 max=0.20636 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1217+3007_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:05:40 2019