! Started logfile: J1217+3007_S_2017_04_28_pus_uvs.log on Thu May 2 16:24:56 2019 obs J1217+3007_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1217+3007_S_2017_04_28_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.743519 visibilities/baseline/integration-bin. ! Found source: J1217+3007 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 3212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1217+3007_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.824308Jy sigma=0.028275 ! Fit after self-cal, rms=0.822201Jy sigma=0.028250 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=6.482 mas, bpa=-14.22 degrees ! Estimated noise=1160.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939689 Jy ! Component: 100 - total flux cleaned = 0.135773 Jy ! Total flux subtracted in 100 components = 0.135773 Jy ! Clean residual min=-0.028085 max=0.029528 Jy/beam ! Clean residual mean=-0.000017 rms=0.008061 Jy/beam ! Combined flux in latest and established models = 0.135773 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.135773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121433Jy sigma=0.002005 ! Fit after self-cal, rms=0.120913Jy sigma=0.002003 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=6.733 mas, bpa=-12.98 degrees ! Estimated noise=1118.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329289 Jy ! Component: 100 - total flux cleaned = 0.0497215 Jy ! Component: 150 - total flux cleaned = 0.0595098 Jy ! Component: 200 - total flux cleaned = 0.0613923 Jy ! Total flux subtracted in 200 components = 0.0613923 Jy ! Clean residual min=-0.018787 max=0.018564 Jy/beam ! Clean residual mean=-0.000019 rms=0.005512 Jy/beam ! Combined flux in latest and established models = 0.197166 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 0.197166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109299Jy sigma=0.001884 ! Fit after self-cal, rms=0.108911Jy sigma=0.001883 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.01 HN 0.80 KP 0.95 ! LA 0.92 MK 0.67 NL 0.90 OV 1.28 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 0.84 KP 0.88 ! LA 0.89 MK 0.67 NL 0.99 OV 1.38 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 0.83 KP 0.90 ! LA 0.94 MK 0.71 NL 0.96 OV 1.22 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.90 HN 0.73 KP 1.00* ! LA 1.39 MK 16.25 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.108911Jy sigma=0.001883 ! Fit after self-cal, rms=1.012063Jy sigma=0.000847 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=6.153 mas, bpa=-7.459 degrees ! Estimated noise=1283.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00714245 Jy ! Component: 100 - total flux cleaned = -0.00867648 Jy ! Component: 150 - total flux cleaned = -0.00899292 Jy ! Component: 200 - total flux cleaned = -0.00877652 Jy ! Total flux subtracted in 200 components = -0.00877652 Jy ! Clean residual min=-0.009636 max=0.010004 Jy/beam ! Clean residual mean=0.000002 rms=0.002415 Jy/beam ! Combined flux in latest and established models = 0.188389 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.188389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.009596Jy sigma=0.000811 ! Fit after self-cal, rms=1.009575Jy sigma=0.000799 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.009575Jy sigma=0.000799 ! Fit after self-cal, rms=0.116693Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.352 mas, bmaj=6.179 mas, bpa=-8.56 degrees ! Estimated noise=1256.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142894 Jy ! Component: 100 - total flux cleaned = -0.00151943 Jy ! Component: 150 - total flux cleaned = -0.00151753 Jy ! Component: 200 - total flux cleaned = -0.00166581 Jy ! Total flux subtracted in 200 components = -0.00166581 Jy ! Clean residual min=-0.005833 max=0.006297 Jy/beam ! Clean residual mean=0.000010 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.186723 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.186723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116624Jy sigma=0.000672 ! Fit after self-cal, rms=0.117441Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0066444 Jy ! Component: 100 - total flux cleaned = 0.0107367 Jy ! Component: 150 - total flux cleaned = 0.0126364 Jy ! Component: 200 - total flux cleaned = 0.0136108 Jy ! Total flux subtracted in 200 components = 0.0136108 Jy ! Clean residual min=-0.005231 max=0.003876 Jy/beam ! Clean residual mean=0.000008 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.200334 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.200334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117036Jy sigma=0.000661 ! Fit after self-cal, rms=0.116882Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116882Jy sigma=0.000660 ! Fit after self-cal, rms=0.118950Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=6.174 mas, bpa=-7.878 degrees ! Estimated noise=1259.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111087 Jy ! Component: 100 - total flux cleaned = 0.00185871 Jy ! Component: 150 - total flux cleaned = 0.00250096 Jy ! Component: 200 - total flux cleaned = 0.002719 Jy ! Total flux subtracted in 200 components = 0.002719 Jy ! Clean residual min=-0.004962 max=0.003747 Jy/beam ! Clean residual mean=0.000005 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.203053 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 0.203053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118833Jy sigma=0.000656 ! Fit after self-cal, rms=0.118731Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092797 Jy ! Component: 100 - total flux cleaned = 0.00106386 Jy ! Component: 150 - total flux cleaned = 0.00118943 Jy ! Component: 200 - total flux cleaned = 0.00130726 Jy ! Total flux subtracted in 200 components = 0.00130726 Jy ! Clean residual min=-0.004838 max=0.003781 Jy/beam ! Clean residual mean=0.000005 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.20436 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 92 components and 0.204361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118654Jy sigma=0.000654 ! Fit after self-cal, rms=0.118626Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118626Jy sigma=0.000654 ! Fit after self-cal, rms=0.117192Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=9.64 mas, bpa=-4.01 degrees ! Estimated noise=1670.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229587 Jy ! Component: 100 - total flux cleaned = -0.000163061 Jy ! Component: 150 - total flux cleaned = -0.000104508 Jy ! Component: 200 - total flux cleaned = -6.94895e-06 Jy ! Total flux subtracted in 200 components = -6.94895e-06 Jy ! Clean residual min=-0.004108 max=0.004584 Jy/beam ! Clean residual mean=0.000006 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.204354 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 101 components and 0.204354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117197Jy sigma=0.000653 ! Fit after self-cal, rms=0.117170Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048619 Jy ! Component: 100 - total flux cleaned = 0.000575542 Jy ! Component: 150 - total flux cleaned = 0.000646719 Jy ! Component: 200 - total flux cleaned = 0.000711406 Jy ! Total flux subtracted in 200 components = 0.000711406 Jy ! Clean residual min=-0.004134 max=0.004557 Jy/beam ! Clean residual mean=0.000006 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.205065 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.205065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117189Jy sigma=0.000653 ! Fit after self-cal, rms=0.117191Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=6.175 mas, bpa=-7.391 degrees ! Estimated noise=1259.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 6.175 at -7.391 degrees (North through East) ! Clean map min=-0.0044277 max=0.1548 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=5.565 mas, bpa=-8.476 degrees ! Estimated noise=1525.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116977 Jy ! Component: 100 - total flux cleaned = 0.148298 Jy ! Component: 150 - total flux cleaned = 0.162759 Jy ! Component: 200 - total flux cleaned = 0.171375 Jy ! Total flux subtracted in 200 components = 0.171375 Jy ! Clean residual min=-0.005719 max=0.006646 Jy/beam ! Clean residual mean=0.000001 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.171375 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.171375 Jy ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=6.175 mas, bpa=-7.391 degrees ! Estimated noise=1259.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00879501 Jy ! Component: 100 - total flux cleaned = 0.0149701 Jy ! Component: 150 - total flux cleaned = 0.0197173 Jy ! Component: 200 - total flux cleaned = 0.0224387 Jy ! Total flux subtracted in 200 components = 0.0224387 Jy ! Clean residual min=-0.004328 max=0.003562 Jy/beam ! Clean residual mean=0.000004 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.193814 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 46 components and 0.193814 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=9.64 mas, bpa=-4.01 degrees ! Estimated noise=1670.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464271 Jy ! Component: 100 - total flux cleaned = 0.00735247 Jy ! Component: 150 - total flux cleaned = 0.00888955 Jy ! Component: 200 - total flux cleaned = 0.00954744 Jy ! Total flux subtracted in 200 components = 0.00954744 Jy ! Clean residual min=-0.004240 max=0.004717 Jy/beam ! Clean residual mean=0.000006 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.203361 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482944 Jy ! Component: 100 - total flux cleaned = 0.000842118 Jy ! Component: 150 - total flux cleaned = 0.00111252 Jy ! Component: 200 - total flux cleaned = 0.00124165 Jy ! Total flux subtracted in 200 components = 0.00124165 Jy ! Clean residual min=-0.004262 max=0.004652 Jy/beam ! Clean residual mean=0.000005 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.204603 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 79 components and 0.204603 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=6.175 mas, bpa=-7.391 degrees ! Estimated noise=1259.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659962 Jy ! Component: 100 - total flux cleaned = -0.000292022 Jy ! Component: 150 - total flux cleaned = -9.87003e-05 Jy ! Component: 200 - total flux cleaned = -3.74781e-05 Jy ! Total flux subtracted in 200 components = -3.74781e-05 Jy ! Clean residual min=-0.004004 max=0.003627 Jy/beam ! Clean residual mean=0.000003 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.204565 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 0.204565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117042Jy sigma=0.000647 ! Fit after self-cal, rms=0.116983Jy sigma=0.000647 wmodel J1217+3007_S_2017_04_28_pus_map.mod ! Writing 102 model components to file: J1217+3007_S_2017_04_28_pus_map.mod wobs J1217+3007_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1217+3007_S_2017_04_28_pus_uvs.fits wwins J1217+3007_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J1217+3007_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130602 Jy ! Component: 100 - total flux cleaned = -0.00156744 Jy ! Component: 150 - total flux cleaned = -0.00199322 Jy ! Component: 200 - total flux cleaned = -0.00210839 Jy ! Component: 250 - total flux cleaned = -0.00210688 Jy ! Component: 300 - total flux cleaned = -0.00226715 Jy ! Component: 350 - total flux cleaned = -0.00237206 Jy ! Component: 400 - total flux cleaned = -0.00257726 Jy ! Component: 450 - total flux cleaned = -0.00267678 Jy ! Component: 500 - total flux cleaned = -0.00296978 Jy ! Component: 550 - total flux cleaned = -0.0031607 Jy ! Component: 600 - total flux cleaned = -0.00339372 Jy ! Component: 650 - total flux cleaned = -0.00353056 Jy ! Component: 700 - total flux cleaned = -0.00352935 Jy ! Component: 750 - total flux cleaned = -0.00352929 Jy ! Component: 800 - total flux cleaned = -0.00361649 Jy ! Component: 850 - total flux cleaned = -0.0037443 Jy ! Component: 900 - total flux cleaned = -0.00370179 Jy ! Component: 950 - total flux cleaned = -0.00374263 Jy ! Component: 1000 - total flux cleaned = -0.0036606 Jy ! Component: 1050 - total flux cleaned = -0.00362107 Jy ! Component: 1100 - total flux cleaned = -0.00366094 Jy ! Component: 1150 - total flux cleaned = -0.00358269 Jy ! Component: 1200 - total flux cleaned = -0.0035825 Jy ! Component: 1250 - total flux cleaned = -0.00358224 Jy ! Component: 1300 - total flux cleaned = -0.00358211 Jy ! Component: 1350 - total flux cleaned = -0.00361949 Jy ! Component: 1400 - total flux cleaned = -0.00373005 Jy ! Component: 1450 - total flux cleaned = -0.00380297 Jy ! Component: 1500 - total flux cleaned = -0.00387506 Jy ! Component: 1550 - total flux cleaned = -0.00387463 Jy ! Component: 1600 - total flux cleaned = -0.00394488 Jy ! Component: 1650 - total flux cleaned = -0.00397936 Jy ! Component: 1700 - total flux cleaned = -0.00401363 Jy ! Component: 1750 - total flux cleaned = -0.00411522 Jy ! Component: 1800 - total flux cleaned = -0.00414903 Jy ! Component: 1850 - total flux cleaned = -0.00414919 Jy ! Component: 1900 - total flux cleaned = -0.00428071 Jy ! Component: 1950 - total flux cleaned = -0.00424785 Jy ! Component: 2000 - total flux cleaned = -0.00421606 Jy ! Component: 2050 - total flux cleaned = -0.00418366 Jy ! Component: 2100 - total flux cleaned = -0.00434159 Jy ! Component: 2150 - total flux cleaned = -0.00427831 Jy ! Component: 2200 - total flux cleaned = -0.00427857 Jy ! Component: 2250 - total flux cleaned = -0.00430901 Jy ! Component: 2300 - total flux cleaned = -0.00427814 Jy ! Component: 2350 - total flux cleaned = -0.00421788 Jy ! Component: 2400 - total flux cleaned = -0.00415816 Jy ! Component: 2450 - total flux cleaned = -0.00415797 Jy ! Component: 2500 - total flux cleaned = -0.00406994 Jy ! Component: 2550 - total flux cleaned = -0.00404093 Jy ! Component: 2600 - total flux cleaned = -0.00389627 Jy ! Component: 2650 - total flux cleaned = -0.00383908 Jy ! Component: 2700 - total flux cleaned = -0.003839 Jy ! Component: 2750 - total flux cleaned = -0.00369795 Jy ! Component: 2800 - total flux cleaned = -0.00355833 Jy ! Component: 2850 - total flux cleaned = -0.0035028 Jy ! Component: 2900 - total flux cleaned = -0.00331006 Jy ! Component: 2950 - total flux cleaned = -0.00325557 Jy ! Component: 3000 - total flux cleaned = -0.00317421 Jy ! Component: 3050 - total flux cleaned = -0.0031207 Jy ! Component: 3100 - total flux cleaned = -0.00304069 Jy ! Component: 3150 - total flux cleaned = -0.00293449 Jy ! Component: 3200 - total flux cleaned = -0.00277682 Jy ! Component: 3250 - total flux cleaned = -0.00275072 Jy ! Component: 3300 - total flux cleaned = -0.00256926 Jy ! Component: 3350 - total flux cleaned = -0.00256912 Jy ! Component: 3400 - total flux cleaned = -0.00236493 Jy ! Component: 3450 - total flux cleaned = -0.00228896 Jy ! Component: 3500 - total flux cleaned = -0.00223857 Jy ! Component: 3550 - total flux cleaned = -0.00221342 Jy ! Component: 3600 - total flux cleaned = -0.00208964 Jy ! Component: 3650 - total flux cleaned = -0.00201569 Jy ! Component: 3700 - total flux cleaned = -0.00201588 Jy ! Component: 3750 - total flux cleaned = -0.00189421 Jy ! Component: 3800 - total flux cleaned = -0.00187001 Jy ! Component: 3850 - total flux cleaned = -0.00174995 Jy ! Component: 3900 - total flux cleaned = -0.00163092 Jy ! Component: 3950 - total flux cleaned = -0.00148887 Jy ! Component: 4000 - total flux cleaned = -0.0013713 Jy ! Component: 4050 - total flux cleaned = -0.00141827 Jy ! Total flux subtracted in 4096 components = -0.00137169 Jy ! Clean residual min=-0.001294 max=0.001226 Jy/beam ! Clean residual mean=-0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.203193 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 408 components and 0.203193 Jy ![Exited script file: muppet] wmap "J1217+3007_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 6.175 at -7.391 degrees (North through East) ! Clean map min=-0.0031606 max=0.15515 Jy/beam ! Writing clean map to FITS file: J1217+3007_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.155146 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000429751 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.830994 0.830994 1.66199 3.32398 6.64795 13.2959 26.5918 53.1836 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.155 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 6.175 at -7.391 degrees (North through East) ! Clean map min=-0.0031606 max=0.15515 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1217+3007_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:25:00 2019