! Started logfile: J1217+3007_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:41:26 2019 obs J1217+3007_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1217+3007_S_2017_03_27_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688889 visibilities/baseline/integration-bin. ! Found source: J1217+3007 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1217+3007_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.819041Jy sigma=0.007600 ! Fit after self-cal, rms=0.816637Jy sigma=0.007578 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=6.51 mas, bpa=-22.33 degrees ! Estimated noise=2173.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144824 Jy ! Component: 100 - total flux cleaned = 0.176516 Jy ! Total flux subtracted in 100 components = 0.176516 Jy ! Clean residual min=-0.009656 max=0.012420 Jy/beam ! Clean residual mean=-0.000013 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 0.176516 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.176516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087370Jy sigma=0.000731 ! Fit after self-cal, rms=0.087368Jy sigma=0.000731 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.765 mas, bmaj=7.089 mas, bpa=-17.55 degrees ! Estimated noise=1887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112214 Jy ! Component: 100 - total flux cleaned = 0.0166044 Jy ! Component: 150 - total flux cleaned = 0.0183248 Jy ! Component: 200 - total flux cleaned = 0.018698 Jy ! Total flux subtracted in 200 components = 0.018698 Jy ! Clean residual min=-0.007728 max=0.010204 Jy/beam ! Clean residual mean=-0.000019 rms=0.002108 Jy/beam ! Combined flux in latest and established models = 0.195214 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.195214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085915Jy sigma=0.000717 ! Fit after self-cal, rms=0.085888Jy sigma=0.000717 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.98 HN 0.94 KP 0.98 ! LA 0.91 MK 1.01 NL 1.01 OV 1.06 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 HN 0.96 KP 0.96 ! LA 0.90 MK 0.97 NL 1.09 OV 1.08 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.85 HN 1.02 KP 0.97 ! LA 0.95 MK 1.02 NL 1.10 OV 0.99 ! PT 0.83 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.12 HN 0.86 KP 1.00* ! LA 0.96 MK 1.22 NL 1.00* OV 2.32 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.085888Jy sigma=0.000717 ! Fit after self-cal, rms=0.092429Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=7.111 mas, bpa=-17.33 degrees ! Estimated noise=1891.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870513 Jy ! Component: 100 - total flux cleaned = 0.0128011 Jy ! Component: 150 - total flux cleaned = 0.0142337 Jy ! Component: 200 - total flux cleaned = 0.0152235 Jy ! Total flux subtracted in 200 components = 0.0152235 Jy ! Clean residual min=-0.005007 max=0.005804 Jy/beam ! Clean residual mean=-0.000017 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.210437 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.210437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091534Jy sigma=0.000666 ! Fit after self-cal, rms=0.091741Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091741Jy sigma=0.000665 ! Fit after self-cal, rms=0.113317Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.772 mas, bmaj=7.143 mas, bpa=-17.37 degrees ! Estimated noise=1877.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237729 Jy ! Component: 100 - total flux cleaned = 0.00280792 Jy ! Component: 150 - total flux cleaned = 0.00273185 Jy ! Component: 200 - total flux cleaned = 0.00273218 Jy ! Total flux subtracted in 200 components = 0.00273218 Jy ! Clean residual min=-0.003889 max=0.004686 Jy/beam ! Clean residual mean=-0.000010 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.213169 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.213169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113129Jy sigma=0.000644 ! Fit after self-cal, rms=0.113240Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (51, 88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154549 Jy ! Component: 100 - total flux cleaned = 0.0019329 Jy ! Component: 150 - total flux cleaned = 0.00274395 Jy ! Component: 200 - total flux cleaned = 0.00281555 Jy ! Total flux subtracted in 200 components = 0.00281555 Jy ! Clean residual min=-0.003924 max=0.003788 Jy/beam ! Clean residual mean=-0.000009 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.215985 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 97 components and 0.215985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112908Jy sigma=0.000641 ! Fit after self-cal, rms=0.112884Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112884Jy sigma=0.000640 ! Fit after self-cal, rms=0.110014Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.772 mas, bmaj=7.153 mas, bpa=-17.43 degrees ! Estimated noise=1878.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169479 Jy ! Component: 100 - total flux cleaned = 0.00195351 Jy ! Component: 150 - total flux cleaned = 0.00189776 Jy ! Component: 200 - total flux cleaned = 0.00184546 Jy ! Total flux subtracted in 200 components = 0.00184546 Jy ! Clean residual min=-0.003715 max=0.003814 Jy/beam ! Clean residual mean=-0.000009 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.21783 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 118 components and 0.21783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109890Jy sigma=0.000639 ! Fit after self-cal, rms=0.109885Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000654187 Jy ! Component: 100 - total flux cleaned = 0.000550836 Jy ! Component: 150 - total flux cleaned = 0.000359013 Jy ! Component: 200 - total flux cleaned = 0.000268333 Jy ! Total flux subtracted in 200 components = 0.000268333 Jy ! Clean residual min=-0.003692 max=0.003744 Jy/beam ! Clean residual mean=-0.000009 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.218099 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 130 components and 0.218099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109812Jy sigma=0.000639 ! Fit after self-cal, rms=0.109818Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109818Jy sigma=0.000639 ! Fit after self-cal, rms=0.108081Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.625 mas, bmaj=9.79 mas, bpa=-9.09 degrees ! Estimated noise=2230.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000767886 Jy ! Component: 100 - total flux cleaned = -0.000989008 Jy ! Component: 150 - total flux cleaned = -0.00113472 Jy ! Component: 200 - total flux cleaned = -0.00126919 Jy ! Total flux subtracted in 200 components = -0.00126919 Jy ! Clean residual min=-0.003711 max=0.003953 Jy/beam ! Clean residual mean=-0.000016 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.21683 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 155 components and 0.21683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108031Jy sigma=0.000638 ! Fit after self-cal, rms=0.108029Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346802 Jy ! Component: 100 - total flux cleaned = -0.000347252 Jy ! Component: 150 - total flux cleaned = -0.00042368 Jy ! Component: 200 - total flux cleaned = -0.000388071 Jy ! Total flux subtracted in 200 components = -0.000388071 Jy ! Clean residual min=-0.003656 max=0.003954 Jy/beam ! Clean residual mean=-0.000016 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.216441 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 169 components and 0.216441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108011Jy sigma=0.000638 ! Fit after self-cal, rms=0.108016Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=7.157 mas, bpa=-17.46 degrees ! Estimated noise=1878.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 7.157 at -17.46 degrees (North through East) ! Clean map min=-0.0039618 max=0.18606 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=6.567 mas, bpa=-22.12 degrees ! Estimated noise=2175.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144716 Jy ! Component: 100 - total flux cleaned = 0.176506 Jy ! Component: 150 - total flux cleaned = 0.188281 Jy ! Component: 200 - total flux cleaned = 0.195016 Jy ! Total flux subtracted in 200 components = 0.195016 Jy ! Clean residual min=-0.005497 max=0.005924 Jy/beam ! Clean residual mean=-0.000007 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.195016 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.195016 Jy ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=7.157 mas, bpa=-17.46 degrees ! Estimated noise=1878.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00677447 Jy ! Component: 100 - total flux cleaned = 0.0105539 Jy ! Component: 150 - total flux cleaned = 0.0137896 Jy ! Component: 200 - total flux cleaned = 0.0164788 Jy ! Total flux subtracted in 200 components = 0.0164788 Jy ! Clean residual min=-0.004171 max=0.004529 Jy/beam ! Clean residual mean=-0.000009 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.211495 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 43 components and 0.211495 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.625 mas, bmaj=9.79 mas, bpa=-9.09 degrees ! Estimated noise=2230.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223052 Jy ! Component: 100 - total flux cleaned = 0.00343345 Jy ! Component: 150 - total flux cleaned = 0.00450731 Jy ! Component: 200 - total flux cleaned = 0.00517457 Jy ! Total flux subtracted in 200 components = 0.00517457 Jy ! Clean residual min=-0.004376 max=0.004135 Jy/beam ! Clean residual mean=-0.000017 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.21667 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224949 Jy ! Component: 100 - total flux cleaned = 0.000360364 Jy ! Component: 150 - total flux cleaned = 0.000360727 Jy ! Component: 200 - total flux cleaned = 0.000478424 Jy ! Total flux subtracted in 200 components = 0.000478424 Jy ! Clean residual min=-0.004191 max=0.004034 Jy/beam ! Clean residual mean=-0.000017 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.217148 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 109 components and 0.217148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=7.157 mas, bpa=-17.46 degrees ! Estimated noise=1878.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645447 Jy ! Component: 100 - total flux cleaned = 0.00140236 Jy ! Component: 150 - total flux cleaned = 0.00160649 Jy ! Component: 200 - total flux cleaned = 0.00166784 Jy ! Total flux subtracted in 200 components = 0.00166784 Jy ! Clean residual min=-0.003850 max=0.004003 Jy/beam ! Clean residual mean=-0.000009 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.218816 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 133 components and 0.218816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108083Jy sigma=0.000639 ! Fit after self-cal, rms=0.108096Jy sigma=0.000639 wmodel J1217+3007_S_2017_03_27_pus_map.mod ! Writing 133 model components to file: J1217+3007_S_2017_03_27_pus_map.mod wobs J1217+3007_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1217+3007_S_2017_03_27_pus_uvs.fits wwins J1217+3007_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1217+3007_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954004 Jy ! Component: 100 - total flux cleaned = 0.00161084 Jy ! Component: 150 - total flux cleaned = 0.00161244 Jy ! Component: 200 - total flux cleaned = 0.00161452 Jy ! Component: 250 - total flux cleaned = 0.00150054 Jy ! Component: 300 - total flux cleaned = 0.00122558 Jy ! Component: 350 - total flux cleaned = 0.00106427 Jy ! Component: 400 - total flux cleaned = 0.000853332 Jy ! Component: 450 - total flux cleaned = 0.000597443 Jy ! Component: 500 - total flux cleaned = 0.000397589 Jy ! Component: 550 - total flux cleaned = 0.000301137 Jy ! Component: 600 - total flux cleaned = 6.14348e-05 Jy ! Component: 650 - total flux cleaned = -0.000267099 Jy ! Component: 700 - total flux cleaned = -0.000449829 Jy ! Component: 750 - total flux cleaned = -0.000676105 Jy ! Component: 800 - total flux cleaned = -0.00089904 Jy ! Component: 850 - total flux cleaned = -0.00116195 Jy ! Component: 900 - total flux cleaned = -0.00142019 Jy ! Component: 950 - total flux cleaned = -0.00180039 Jy ! Component: 1000 - total flux cleaned = -0.00209123 Jy ! Component: 1050 - total flux cleaned = -0.00233675 Jy ! Component: 1100 - total flux cleaned = -0.00265986 Jy ! Component: 1150 - total flux cleaned = -0.00289912 Jy ! Component: 1200 - total flux cleaned = -0.00317568 Jy ! Component: 1250 - total flux cleaned = -0.00360317 Jy ! Component: 1300 - total flux cleaned = -0.00387202 Jy ! Component: 1350 - total flux cleaned = -0.00421338 Jy ! Component: 1400 - total flux cleaned = -0.00455069 Jy ! Component: 1450 - total flux cleaned = -0.00480972 Jy ! Component: 1500 - total flux cleaned = -0.00517475 Jy ! Component: 1550 - total flux cleaned = -0.00546298 Jy ! Component: 1600 - total flux cleaned = -0.00571318 Jy ! Component: 1650 - total flux cleaned = -0.00603151 Jy ! Component: 1700 - total flux cleaned = -0.00638015 Jy ! Component: 1750 - total flux cleaned = -0.00672526 Jy ! Component: 1800 - total flux cleaned = -0.00696452 Jy ! Component: 1850 - total flux cleaned = -0.00733644 Jy ! Component: 1900 - total flux cleaned = -0.00750378 Jy ! Component: 1950 - total flux cleaned = -0.00783555 Jy ! Component: 2000 - total flux cleaned = -0.00809849 Jy ! Component: 2050 - total flux cleaned = -0.00839132 Jy ! Component: 2100 - total flux cleaned = -0.00864923 Jy ! Component: 2150 - total flux cleaned = -0.00887344 Jy ! Component: 2200 - total flux cleaned = -0.00912681 Jy ! Component: 2250 - total flux cleaned = -0.00922109 Jy ! Component: 2300 - total flux cleaned = -0.00943938 Jy ! Component: 2350 - total flux cleaned = -0.00953158 Jy ! Component: 2400 - total flux cleaned = -0.00959295 Jy ! Component: 2450 - total flux cleaned = -0.00983664 Jy ! Component: 2500 - total flux cleaned = -0.0100177 Jy ! Component: 2550 - total flux cleaned = -0.0100776 Jy ! Component: 2600 - total flux cleaned = -0.010167 Jy ! Component: 2650 - total flux cleaned = -0.0103146 Jy ! Component: 2700 - total flux cleaned = -0.0104614 Jy ! Component: 2750 - total flux cleaned = -0.0106067 Jy ! Component: 2800 - total flux cleaned = -0.0107221 Jy ! Component: 2850 - total flux cleaned = -0.0108654 Jy ! Component: 2900 - total flux cleaned = -0.0109226 Jy ! Component: 2950 - total flux cleaned = -0.0110641 Jy ! Component: 3000 - total flux cleaned = -0.0111203 Jy ! Component: 3050 - total flux cleaned = -0.0112319 Jy ! Component: 3100 - total flux cleaned = -0.0113148 Jy ! Component: 3150 - total flux cleaned = -0.0113422 Jy ! Component: 3200 - total flux cleaned = -0.0114787 Jy ! Component: 3250 - total flux cleaned = -0.0115598 Jy ! Component: 3300 - total flux cleaned = -0.0116137 Jy ! Component: 3350 - total flux cleaned = -0.0116671 Jy ! Component: 3400 - total flux cleaned = -0.0116672 Jy ! Component: 3450 - total flux cleaned = -0.0119056 Jy ! Component: 3500 - total flux cleaned = -0.0119055 Jy ! Component: 3550 - total flux cleaned = -0.0119315 Jy ! Component: 3600 - total flux cleaned = -0.0119316 Jy ! Component: 3650 - total flux cleaned = -0.0120607 Jy ! Component: 3700 - total flux cleaned = -0.0121119 Jy ! Component: 3750 - total flux cleaned = -0.0122139 Jy ! Component: 3800 - total flux cleaned = -0.0122901 Jy ! Component: 3850 - total flux cleaned = -0.0123154 Jy ! Component: 3900 - total flux cleaned = -0.0123905 Jy ! Component: 3950 - total flux cleaned = -0.0124902 Jy ! Component: 4000 - total flux cleaned = -0.0125647 Jy ! Component: 4050 - total flux cleaned = -0.0126142 Jy ! Total flux subtracted in 4096 components = -0.0127125 Jy ! Clean residual min=-0.001429 max=0.001337 Jy/beam ! Clean residual mean=-0.000007 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.206103 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 416 components and 0.206103 Jy ![Exited script file: muppet] wmap "J1217+3007_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 7.157 at -17.46 degrees (North through East) ! Clean map min=-0.0042567 max=0.18526 Jy/beam ! Writing clean map to FITS file: J1217+3007_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.185258 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000438256 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.709695 0.709695 1.41939 2.83878 5.67756 11.3551 22.7102 45.4205 90.841 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.185 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 7.157 at -17.46 degrees (North through East) ! Clean map min=-0.0042567 max=0.18526 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1217+3007_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:41:30 2019