! Started logfile: J1216-1033_S_2017_07_09_pus_uvs.log on Wed May 8 14:48:29 2019 obs J1216-1033_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1216-1033_S_2017_07_09_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.759596 visibilities/baseline/integration-bin. ! Found source: J1216-1033 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 7520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1216-1033_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 317 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891113Jy sigma=0.007685 ! Fit after self-cal, rms=0.882728Jy sigma=0.007617 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=7.123 mas, bpa=-5.311 degrees ! Estimated noise=1401.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0915885 Jy ! Component: 100 - total flux cleaned = 0.11197 Jy ! Total flux subtracted in 100 components = 0.11197 Jy ! Clean residual min=-0.004657 max=0.006948 Jy/beam ! Clean residual mean=0.000005 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.11197 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.11197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082823Jy sigma=0.000678 ! Fit after self-cal, rms=0.082818Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=8.261 mas, bpa=-5.513 degrees ! Estimated noise=1064.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00943724 Jy ! Component: 100 - total flux cleaned = 0.0137565 Jy ! Component: 150 - total flux cleaned = 0.0160965 Jy ! Component: 200 - total flux cleaned = 0.0174173 Jy ! Total flux subtracted in 200 components = 0.0174173 Jy ! Clean residual min=-0.003119 max=0.003525 Jy/beam ! Clean residual mean=0.000005 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.129387 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 35 components and 0.129387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081790Jy sigma=0.000670 ! Fit after self-cal, rms=0.081810Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.03 KP 1.06 ! LA 1.00 MK 1.01 NL 0.89 OV 1.03 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.01 KP 0.99 ! LA 1.01 MK 0.97 NL 0.99 OV 1.08 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00 KP 0.98 ! LA 0.94 MK 1.04 NL 1.03 OV 0.94 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.20 HN 0.92 KP 1.00* ! LA 0.78 MK 1.06 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.081810Jy sigma=0.000670 ! Fit after self-cal, rms=0.080352Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=8.274 mas, bpa=-5.565 degrees ! Estimated noise=1063.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356635 Jy ! Component: 100 - total flux cleaned = 0.000373723 Jy ! Component: 150 - total flux cleaned = 0.000373461 Jy ! Component: 200 - total flux cleaned = 0.000398884 Jy ! Total flux subtracted in 200 components = 0.000398884 Jy ! Clean residual min=-0.002928 max=0.003344 Jy/beam ! Clean residual mean=0.000002 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.129786 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.129786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080345Jy sigma=0.000666 ! Fit after self-cal, rms=0.080395Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080395Jy sigma=0.000665 ! Fit after self-cal, rms=0.080620Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=8.265 mas, bpa=-5.57 degrees ! Estimated noise=1063.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000233968 Jy ! Component: 100 - total flux cleaned = 0.000261346 Jy ! Component: 150 - total flux cleaned = 0.000261311 Jy ! Component: 200 - total flux cleaned = 0.00026089 Jy ! Total flux subtracted in 200 components = 0.00026089 Jy ! Clean residual min=-0.002892 max=0.003150 Jy/beam ! Clean residual mean=0.000001 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.130047 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.130047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080615Jy sigma=0.000664 ! Fit after self-cal, rms=0.080704Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276286 Jy ! Component: 100 - total flux cleaned = 0.00363464 Jy ! Component: 150 - total flux cleaned = 0.00389961 Jy ! Component: 200 - total flux cleaned = 0.00399078 Jy ! Total flux subtracted in 200 components = 0.00399078 Jy ! Clean residual min=-0.002831 max=0.002862 Jy/beam ! Clean residual mean=0.000001 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.134038 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.134038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080616Jy sigma=0.000663 ! Fit after self-cal, rms=0.080604Jy sigma=0.000663 ! Inverting map ! Added new window around map position (94, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194092 Jy ! Component: 100 - total flux cleaned = 0.0018265 Jy ! Component: 150 - total flux cleaned = 0.00195085 Jy ! Component: 200 - total flux cleaned = 0.00206406 Jy ! Total flux subtracted in 200 components = 0.00206406 Jy ! Clean residual min=-0.002681 max=0.002403 Jy/beam ! Clean residual mean=0.000000 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.136102 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 94 components and 0.136102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080505Jy sigma=0.000663 ! Fit after self-cal, rms=0.080551Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080551Jy sigma=0.000662 ! Fit after self-cal, rms=0.080440Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=8.266 mas, bpa=-5.608 degrees ! Estimated noise=1059.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000321917 Jy ! Component: 100 - total flux cleaned = 0.000394945 Jy ! Component: 150 - total flux cleaned = 0.000496923 Jy ! Component: 200 - total flux cleaned = 0.000592216 Jy ! Total flux subtracted in 200 components = 0.000592216 Jy ! Clean residual min=-0.002571 max=0.002397 Jy/beam ! Clean residual mean=-0.000000 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.136694 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 0.136694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080410Jy sigma=0.000662 ! Fit after self-cal, rms=0.080440Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.16417e-05 Jy ! Component: 100 - total flux cleaned = 0.000150534 Jy ! Component: 150 - total flux cleaned = 0.000263516 Jy ! Component: 200 - total flux cleaned = 0.000344605 Jy ! Total flux subtracted in 200 components = 0.000344605 Jy ! Clean residual min=-0.002542 max=0.002352 Jy/beam ! Clean residual mean=-0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.137039 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 112 components and 0.137039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080421Jy sigma=0.000662 ! Fit after self-cal, rms=0.080424Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080424Jy sigma=0.000662 ! Fit after self-cal, rms=0.080386Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.151 mas, bmaj=16.53 mas, bpa=-6.965 degrees ! Estimated noise=1381.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011385 Jy ! Component: 100 - total flux cleaned = 0.00140074 Jy ! Component: 150 - total flux cleaned = 0.00152283 Jy ! Component: 200 - total flux cleaned = 0.00154025 Jy ! Total flux subtracted in 200 components = 0.00154025 Jy ! Clean residual min=-0.002973 max=0.002845 Jy/beam ! Clean residual mean=-0.000002 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.138579 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 120 components and 0.138579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080387Jy sigma=0.000662 ! Fit after self-cal, rms=0.080389Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130733 Jy ! Component: 100 - total flux cleaned = 0.000131287 Jy ! Component: 150 - total flux cleaned = 0.000131235 Jy ! Component: 200 - total flux cleaned = 0.000104895 Jy ! Total flux subtracted in 200 components = 0.000104895 Jy ! Clean residual min=-0.002991 max=0.002773 Jy/beam ! Clean residual mean=-0.000002 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.138684 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 124 components and 0.138684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080389Jy sigma=0.000662 ! Fit after self-cal, rms=0.080389Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=8.261 mas, bpa=-5.611 degrees ! Estimated noise=1058.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.957 x 8.261 at -5.611 degrees (North through East) ! Clean map min=-0.002349 max=0.11824 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=7.119 mas, bpa=-5.332 degrees ! Estimated noise=1395.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909304 Jy ! Component: 100 - total flux cleaned = 0.111283 Jy ! Component: 150 - total flux cleaned = 0.118655 Jy ! Component: 200 - total flux cleaned = 0.122147 Jy ! Total flux subtracted in 200 components = 0.122147 Jy ! Clean residual min=-0.003971 max=0.003518 Jy/beam ! Clean residual mean=0.000002 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.122147 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.122147 Jy ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=8.261 mas, bpa=-5.611 degrees ! Estimated noise=1058.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428551 Jy ! Component: 100 - total flux cleaned = 0.00718554 Jy ! Component: 150 - total flux cleaned = 0.00919344 Jy ! Component: 200 - total flux cleaned = 0.0103138 Jy ! Total flux subtracted in 200 components = 0.0103138 Jy ! Clean residual min=-0.002805 max=0.002357 Jy/beam ! Clean residual mean=0.000002 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.132461 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 62 components and 0.132461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.151 mas, bmaj=16.53 mas, bpa=-6.965 degrees ! Estimated noise=1381.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221116 Jy ! Component: 100 - total flux cleaned = 0.00354778 Jy ! Component: 150 - total flux cleaned = 0.00454909 Jy ! Component: 200 - total flux cleaned = 0.00502518 Jy ! Total flux subtracted in 200 components = 0.00502518 Jy ! Clean residual min=-0.002979 max=0.002899 Jy/beam ! Clean residual mean=-0.000001 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.137486 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110116 Jy ! Component: 100 - total flux cleaned = 0.000235615 Jy ! Component: 150 - total flux cleaned = 0.000348519 Jy ! Component: 200 - total flux cleaned = 0.00041123 Jy ! Total flux subtracted in 200 components = 0.00041123 Jy ! Clean residual min=-0.002949 max=0.002765 Jy/beam ! Clean residual mean=-0.000001 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.137898 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 88 components and 0.137898 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=8.261 mas, bpa=-5.611 degrees ! Estimated noise=1058.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000744045 Jy ! Component: 100 - total flux cleaned = -0.000889905 Jy ! Component: 150 - total flux cleaned = -0.00093455 Jy ! Component: 200 - total flux cleaned = -0.000895948 Jy ! Total flux subtracted in 200 components = -0.000895948 Jy ! Clean residual min=-0.002618 max=0.002291 Jy/beam ! Clean residual mean=0.000000 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.137002 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 0.137002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080434Jy sigma=0.000662 ! Fit after self-cal, rms=0.080429Jy sigma=0.000662 wmodel J1216-1033_S_2017_07_09_pus_map.mod ! Writing 111 model components to file: J1216-1033_S_2017_07_09_pus_map.mod wobs J1216-1033_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1216-1033_S_2017_07_09_pus_uvs.fits wwins J1216-1033_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J1216-1033_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116655 Jy ! Component: 100 - total flux cleaned = -0.000239173 Jy ! Component: 150 - total flux cleaned = -0.000354113 Jy ! Component: 200 - total flux cleaned = -0.000464707 Jy ! Component: 250 - total flux cleaned = -0.000534637 Jy ! Component: 300 - total flux cleaned = -0.000501087 Jy ! Component: 350 - total flux cleaned = -0.000534766 Jy ! Component: 400 - total flux cleaned = -0.000471316 Jy ! Component: 450 - total flux cleaned = -0.000317935 Jy ! Component: 500 - total flux cleaned = -0.000139584 Jy ! Component: 550 - total flux cleaned = -0.000139554 Jy ! Component: 600 - total flux cleaned = 8.67238e-05 Jy ! Component: 650 - total flux cleaned = 0.000196969 Jy ! Component: 700 - total flux cleaned = 0.000305117 Jy ! Component: 750 - total flux cleaned = 0.000384361 Jy ! Component: 800 - total flux cleaned = 0.000436395 Jy ! Component: 850 - total flux cleaned = 0.000562606 Jy ! Component: 900 - total flux cleaned = 0.000512419 Jy ! Component: 950 - total flux cleaned = 0.000488195 Jy ! Component: 1000 - total flux cleaned = 0.000488337 Jy ! Component: 1050 - total flux cleaned = 0.000559036 Jy ! Component: 1100 - total flux cleaned = 0.000559111 Jy ! Component: 1150 - total flux cleaned = 0.000627714 Jy ! Component: 1200 - total flux cleaned = 0.000582779 Jy ! Component: 1250 - total flux cleaned = 0.000604839 Jy ! Component: 1300 - total flux cleaned = 0.000604358 Jy ! Component: 1350 - total flux cleaned = 0.000582591 Jy ! Component: 1400 - total flux cleaned = 0.000561516 Jy ! Component: 1450 - total flux cleaned = 0.000645322 Jy ! Component: 1500 - total flux cleaned = 0.000624078 Jy ! Component: 1550 - total flux cleaned = 0.000603265 Jy ! Component: 1600 - total flux cleaned = 0.000582677 Jy ! Component: 1650 - total flux cleaned = 0.000622365 Jy ! Component: 1700 - total flux cleaned = 0.000464223 Jy ! Component: 1750 - total flux cleaned = 0.000522918 Jy ! Component: 1800 - total flux cleaned = 0.000542111 Jy ! Component: 1850 - total flux cleaned = 0.00054209 Jy ! Component: 1900 - total flux cleaned = 0.000560869 Jy ! Component: 1950 - total flux cleaned = 0.000523166 Jy ! Component: 2000 - total flux cleaned = 0.000522944 Jy ! Component: 2050 - total flux cleaned = 0.000540916 Jy ! Component: 2100 - total flux cleaned = 0.000450836 Jy ! Component: 2150 - total flux cleaned = 0.000575889 Jy ! Component: 2200 - total flux cleaned = 0.000540542 Jy ! Component: 2250 - total flux cleaned = 0.000505612 Jy ! Component: 2300 - total flux cleaned = 0.000592105 Jy ! Component: 2350 - total flux cleaned = 0.000711951 Jy ! Component: 2400 - total flux cleaned = 0.000677628 Jy ! Component: 2450 - total flux cleaned = 0.000694358 Jy ! Component: 2500 - total flux cleaned = 0.000694433 Jy ! Component: 2550 - total flux cleaned = 0.000743842 Jy ! Component: 2600 - total flux cleaned = 0.000792791 Jy ! Component: 2650 - total flux cleaned = 0.000841082 Jy ! Component: 2700 - total flux cleaned = 0.000857066 Jy ! Component: 2750 - total flux cleaned = 0.00088851 Jy ! Component: 2800 - total flux cleaned = 0.000919982 Jy ! Component: 2850 - total flux cleaned = 0.000951016 Jy ! Component: 2900 - total flux cleaned = 0.000966377 Jy ! Component: 2950 - total flux cleaned = 0.000996862 Jy ! Component: 3000 - total flux cleaned = 0.00104182 Jy ! Component: 3050 - total flux cleaned = 0.00104185 Jy ! Component: 3100 - total flux cleaned = 0.00110108 Jy ! Component: 3150 - total flux cleaned = 0.00110086 Jy ! Component: 3200 - total flux cleaned = 0.00111529 Jy ! Component: 3250 - total flux cleaned = 0.00110087 Jy ! Component: 3300 - total flux cleaned = 0.00107231 Jy ! Component: 3350 - total flux cleaned = 0.0011006 Jy ! Component: 3400 - total flux cleaned = 0.0011429 Jy ! Component: 3450 - total flux cleaned = 0.00115696 Jy ! Component: 3500 - total flux cleaned = 0.00117069 Jy ! Component: 3550 - total flux cleaned = 0.00121183 Jy ! Component: 3600 - total flux cleaned = 0.00122532 Jy ! Component: 3650 - total flux cleaned = 0.0011985 Jy ! Component: 3700 - total flux cleaned = 0.0012386 Jy ! Component: 3750 - total flux cleaned = 0.00123857 Jy ! Component: 3800 - total flux cleaned = 0.00122542 Jy ! Component: 3850 - total flux cleaned = 0.00125161 Jy ! Component: 3900 - total flux cleaned = 0.00121255 Jy ! Component: 3950 - total flux cleaned = 0.00121248 Jy ! Component: 4000 - total flux cleaned = 0.00122516 Jy ! Component: 4050 - total flux cleaned = 0.00121259 Jy ! Total flux subtracted in 4096 components = 0.0011999 Jy ! Clean residual min=-0.000716 max=0.000763 Jy/beam ! Clean residual mean=-0.000000 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.138202 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 389 components and 0.138201 Jy ![Exited script file: muppet] wmap "J1216-1033_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.957 x 8.261 at -5.611 degrees (North through East) ! Clean map min=-0.0015342 max=0.1185 Jy/beam ! Writing clean map to FITS file: J1216-1033_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118501 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227485 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.575904 0.575904 1.15181 2.30362 4.60723 9.21447 18.4289 36.8579 73.7158 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.957 x 8.261 at -5.611 degrees (North through East) ! Clean map min=-0.0015342 max=0.1185 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1216-1033_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:48:33 2019