! Started logfile: J1216+0929_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:41:22 2019 obs J1216+0929_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1216+0929_S_2017_03_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8423 visibilities/baseline/integration-bin. ! Found source: J1216+0929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 17284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1216+0929_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 447 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.975547Jy sigma=0.008268 ! Fit after self-cal, rms=0.944406Jy sigma=0.008045 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=6.959 mas, bpa=0.2561 degrees ! Estimated noise=1005.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460192 Jy ! Component: 100 - total flux cleaned = 0.0563498 Jy ! Total flux subtracted in 100 components = 0.0563498 Jy ! Clean residual min=-0.003032 max=0.003487 Jy/beam ! Clean residual mean=-0.000010 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0563498 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0563498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085718Jy sigma=0.000652 ! Fit after self-cal, rms=0.085509Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=7.649 mas, bpa=2.706 degrees ! Estimated noise=700.454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029633 Jy ! Component: 100 - total flux cleaned = 0.00392536 Jy ! Component: 150 - total flux cleaned = 0.00384844 Jy ! Component: 200 - total flux cleaned = 0.0038699 Jy ! Total flux subtracted in 200 components = 0.0038699 Jy ! Clean residual min=-0.002004 max=0.002114 Jy/beam ! Clean residual mean=-0.000004 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0602197 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.0602197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085383Jy sigma=0.000650 ! Fit after self-cal, rms=0.085392Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.15 KP 0.99 ! LA 0.97 MK 0.96 NL 0.95 OV 1.07 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.00 KP 0.98 ! LA 0.99 MK 0.95 NL 1.07 OV 1.08 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.97 KP 0.99 ! LA 1.01 MK 1.04 NL 0.97 OV 0.98 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 0.92 KP 1.00* ! LA 0.95 MK 0.93 NL 1.00* OV 0.72 ! PT 1.00 SC 0.97 ! ! ! Fit before self-cal, rms=0.085392Jy sigma=0.000650 ! Fit after self-cal, rms=0.082637Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=7.636 mas, bpa=2.368 degrees ! Estimated noise=699.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278673 Jy ! Component: 100 - total flux cleaned = 0.000279554 Jy ! Component: 150 - total flux cleaned = 0.00026516 Jy ! Component: 200 - total flux cleaned = 0.000251853 Jy ! Total flux subtracted in 200 components = 0.000251853 Jy ! Clean residual min=-0.001758 max=0.001799 Jy/beam ! Clean residual mean=-0.000004 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0604716 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.0604716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082631Jy sigma=0.000648 ! Fit after self-cal, rms=0.082586Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082586Jy sigma=0.000648 ! Fit after self-cal, rms=0.082099Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=7.631 mas, bpa=2.168 degrees ! Estimated noise=698.816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160133 Jy ! Component: 100 - total flux cleaned = 0.00014953 Jy ! Component: 150 - total flux cleaned = 0.000159848 Jy ! Component: 200 - total flux cleaned = 0.000169547 Jy ! Total flux subtracted in 200 components = 0.000169547 Jy ! Clean residual min=-0.001651 max=0.001670 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0606411 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.0606411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082095Jy sigma=0.000647 ! Fit after self-cal, rms=0.082119Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.14626e-05 Jy ! Component: 100 - total flux cleaned = -1.15279e-05 Jy ! Component: 150 - total flux cleaned = -2.83373e-06 Jy ! Component: 200 - total flux cleaned = 5.75808e-06 Jy ! Total flux subtracted in 200 components = 5.75808e-06 Jy ! Clean residual min=-0.001634 max=0.001746 Jy/beam ! Clean residual mean=-0.000001 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0606469 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0606469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082117Jy sigma=0.000647 ! Fit after self-cal, rms=0.082117Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082117Jy sigma=0.000647 ! Fit after self-cal, rms=0.082216Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=7.627 mas, bpa=2.271 degrees ! Estimated noise=698.614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128494 Jy ! Component: 100 - total flux cleaned = 0.00013759 Jy ! Component: 150 - total flux cleaned = 0.00013762 Jy ! Component: 200 - total flux cleaned = 0.000152344 Jy ! Total flux subtracted in 200 components = 0.000152344 Jy ! Clean residual min=-0.001581 max=0.001715 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0607992 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0607992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082213Jy sigma=0.000647 ! Fit after self-cal, rms=0.082226Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.82936e-05 Jy ! Component: 100 - total flux cleaned = -1.09885e-05 Jy ! Component: 150 - total flux cleaned = -4.08143e-06 Jy ! Component: 200 - total flux cleaned = 2.52672e-06 Jy ! Total flux subtracted in 200 components = 2.52672e-06 Jy ! Clean residual min=-0.001585 max=0.001728 Jy/beam ! Clean residual mean=-0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0608018 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0608018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082224Jy sigma=0.000647 ! Fit after self-cal, rms=0.082225Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082225Jy sigma=0.000647 ! Fit after self-cal, rms=0.082271Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.5 mas, bmaj=10.99 mas, bpa=1.963 degrees ! Estimated noise=843.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015146 Jy ! Component: 100 - total flux cleaned = 0.000178688 Jy ! Component: 150 - total flux cleaned = 0.000200161 Jy ! Component: 200 - total flux cleaned = 0.000207607 Jy ! Total flux subtracted in 200 components = 0.000207607 Jy ! Clean residual min=-0.001638 max=0.001759 Jy/beam ! Clean residual mean=-0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0610094 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.0610094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082271Jy sigma=0.000647 ! Fit after self-cal, rms=0.082274Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23384e-05 Jy ! Component: 100 - total flux cleaned = 2.16395e-05 Jy ! Component: 150 - total flux cleaned = 2.5306e-05 Jy ! Component: 200 - total flux cleaned = 2.85106e-05 Jy ! Total flux subtracted in 200 components = 2.85106e-05 Jy ! Clean residual min=-0.001631 max=0.001764 Jy/beam ! Clean residual mean=-0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0610379 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0610379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082274Jy sigma=0.000647 ! Fit after self-cal, rms=0.082274Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=7.623 mas, bpa=2.382 degrees ! Estimated noise=698.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.626 x 7.623 at 2.382 degrees (North through East) ! Clean map min=-0.0015137 max=0.058316 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.092 mas, bmaj=6.937 mas, bpa=-0.08152 degrees ! Estimated noise=991.617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455408 Jy ! Component: 100 - total flux cleaned = 0.055879 Jy ! Component: 150 - total flux cleaned = 0.0594027 Jy ! Component: 200 - total flux cleaned = 0.0606036 Jy ! Total flux subtracted in 200 components = 0.0606036 Jy ! Clean residual min=-0.002503 max=0.002643 Jy/beam ! Clean residual mean=-0.000004 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0606036 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0606036 Jy ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=7.623 mas, bpa=2.382 degrees ! Estimated noise=698.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387495 Jy ! Component: 100 - total flux cleaned = 0.000307401 Jy ! Component: 150 - total flux cleaned = 0.000326166 Jy ! Component: 200 - total flux cleaned = 0.000325658 Jy ! Total flux subtracted in 200 components = 0.000325658 Jy ! Clean residual min=-0.001613 max=0.001751 Jy/beam ! Clean residual mean=-0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0609293 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0609293 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.5 mas, bmaj=10.99 mas, bpa=1.963 degrees ! Estimated noise=843.315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124651 Jy ! Component: 100 - total flux cleaned = 0.000124238 Jy ! Component: 150 - total flux cleaned = 0.000130246 Jy ! Component: 200 - total flux cleaned = 0.000130044 Jy ! Total flux subtracted in 200 components = 0.000130044 Jy ! Clean residual min=-0.001656 max=0.001773 Jy/beam ! Clean residual mean=-0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0610593 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.46457e-06 Jy ! Component: 100 - total flux cleaned = 1.06753e-05 Jy ! Component: 150 - total flux cleaned = 1.55859e-05 Jy ! Component: 200 - total flux cleaned = 2.03251e-05 Jy ! Total flux subtracted in 200 components = 2.03251e-05 Jy ! Clean residual min=-0.001651 max=0.001769 Jy/beam ! Clean residual mean=-0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0610797 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0610797 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.626 mas, bmaj=7.623 mas, bpa=2.382 degrees ! Estimated noise=698.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154338 Jy ! Component: 100 - total flux cleaned = -0.000153407 Jy ! Component: 150 - total flux cleaned = -0.000153413 Jy ! Component: 200 - total flux cleaned = -0.000166283 Jy ! Total flux subtracted in 200 components = -0.000166283 Jy ! Clean residual min=-0.001601 max=0.001744 Jy/beam ! Clean residual mean=-0.000001 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0609134 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.0609134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082280Jy sigma=0.000647 ! Fit after self-cal, rms=0.082289Jy sigma=0.000647 wmodel J1216+0929_S_2017_03_27_pus_map.mod ! Writing 43 model components to file: J1216+0929_S_2017_03_27_pus_map.mod wobs J1216+0929_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1216+0929_S_2017_03_27_pus_uvs.fits wwins J1216+0929_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1216+0929_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437321 Jy ! Component: 100 - total flux cleaned = 0.000522575 Jy ! Component: 150 - total flux cleaned = 0.000712045 Jy ! Component: 200 - total flux cleaned = 0.000791288 Jy ! Component: 250 - total flux cleaned = 0.000893037 Jy ! Component: 300 - total flux cleaned = 0.000892674 Jy ! Component: 350 - total flux cleaned = 0.000892868 Jy ! Component: 400 - total flux cleaned = 0.000963874 Jy ! Component: 450 - total flux cleaned = 0.00103381 Jy ! Component: 500 - total flux cleaned = 0.00103398 Jy ! Component: 550 - total flux cleaned = 0.00107939 Jy ! Component: 600 - total flux cleaned = 0.00110163 Jy ! Component: 650 - total flux cleaned = 0.0011887 Jy ! Component: 700 - total flux cleaned = 0.00123164 Jy ! Component: 750 - total flux cleaned = 0.00125239 Jy ! Component: 800 - total flux cleaned = 0.00125264 Jy ! Component: 850 - total flux cleaned = 0.0013352 Jy ! Component: 900 - total flux cleaned = 0.00137564 Jy ! Component: 950 - total flux cleaned = 0.00141609 Jy ! Component: 1000 - total flux cleaned = 0.00147582 Jy ! Component: 1050 - total flux cleaned = 0.00151488 Jy ! Component: 1100 - total flux cleaned = 0.00155357 Jy ! Component: 1150 - total flux cleaned = 0.00159193 Jy ! Component: 1200 - total flux cleaned = 0.00164861 Jy ! Component: 1250 - total flux cleaned = 0.00172337 Jy ! Component: 1300 - total flux cleaned = 0.0017604 Jy ! Component: 1350 - total flux cleaned = 0.00181525 Jy ! Component: 1400 - total flux cleaned = 0.00185176 Jy ! Component: 1450 - total flux cleaned = 0.00195934 Jy ! Component: 1500 - total flux cleaned = 0.00195948 Jy ! Component: 1550 - total flux cleaned = 0.00202987 Jy ! Component: 1600 - total flux cleaned = 0.00199507 Jy ! Component: 1650 - total flux cleaned = 0.00206424 Jy ! Component: 1700 - total flux cleaned = 0.00206438 Jy ! Component: 1750 - total flux cleaned = 0.00209808 Jy ! Component: 1800 - total flux cleaned = 0.00203112 Jy ! Component: 1850 - total flux cleaned = 0.00204768 Jy ! Component: 1900 - total flux cleaned = 0.00206445 Jy ! Component: 1950 - total flux cleaned = 0.00212977 Jy ! Component: 2000 - total flux cleaned = 0.00219416 Jy ! Component: 2050 - total flux cleaned = 0.00217829 Jy ! Component: 2100 - total flux cleaned = 0.00217849 Jy ! Component: 2150 - total flux cleaned = 0.00222566 Jy ! Component: 2200 - total flux cleaned = 0.00222549 Jy ! Component: 2250 - total flux cleaned = 0.00224104 Jy ! Component: 2300 - total flux cleaned = 0.00225643 Jy ! Component: 2350 - total flux cleaned = 0.00225624 Jy ! Component: 2400 - total flux cleaned = 0.00222618 Jy ! Component: 2450 - total flux cleaned = 0.00227119 Jy ! Component: 2500 - total flux cleaned = 0.00227123 Jy ! Component: 2550 - total flux cleaned = 0.00228592 Jy ! Component: 2600 - total flux cleaned = 0.00225687 Jy ! Component: 2650 - total flux cleaned = 0.00234374 Jy ! Component: 2700 - total flux cleaned = 0.0022719 Jy ! Component: 2750 - total flux cleaned = 0.00232894 Jy ! Component: 2800 - total flux cleaned = 0.00230048 Jy ! Component: 2850 - total flux cleaned = 0.00227255 Jy ! Component: 2900 - total flux cleaned = 0.00231432 Jy ! Component: 2950 - total flux cleaned = 0.00227263 Jy ! Component: 3000 - total flux cleaned = 0.00224514 Jy ! Component: 3050 - total flux cleaned = 0.00227241 Jy ! Component: 3100 - total flux cleaned = 0.00224515 Jy ! Component: 3150 - total flux cleaned = 0.00227207 Jy ! Component: 3200 - total flux cleaned = 0.00228547 Jy ! Component: 3250 - total flux cleaned = 0.00229868 Jy ! Component: 3300 - total flux cleaned = 0.00225886 Jy ! Component: 3350 - total flux cleaned = 0.00225888 Jy ! Component: 3400 - total flux cleaned = 0.00221972 Jy ! Component: 3450 - total flux cleaned = 0.00224572 Jy ! Component: 3500 - total flux cleaned = 0.00225859 Jy ! Component: 3550 - total flux cleaned = 0.00225854 Jy ! Component: 3600 - total flux cleaned = 0.00229682 Jy ! Component: 3650 - total flux cleaned = 0.00233487 Jy ! Component: 3700 - total flux cleaned = 0.00233481 Jy ! Component: 3750 - total flux cleaned = 0.00242257 Jy ! Component: 3800 - total flux cleaned = 0.00237278 Jy ! Component: 3850 - total flux cleaned = 0.0024099 Jy ! Component: 3900 - total flux cleaned = 0.00243443 Jy ! Component: 3950 - total flux cleaned = 0.00242214 Jy ! Component: 4000 - total flux cleaned = 0.00242215 Jy ! Component: 4050 - total flux cleaned = 0.00241005 Jy ! Total flux subtracted in 4096 components = 0.00244608 Jy ! Clean residual min=-0.000635 max=0.000800 Jy/beam ! Clean residual mean=0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.0633595 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 325 components and 0.0633594 Jy ![Exited script file: muppet] wmap "J1216+0929_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.626 x 7.623 at 2.382 degrees (North through East) ! Clean map min=-0.0011861 max=0.058178 Jy/beam ! Writing clean map to FITS file: J1216+0929_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.058178 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000219139 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13001 1.13001 2.26002 4.52005 9.04009 18.0802 36.1604 72.3208 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.626 x 7.623 at 2.382 degrees (North through East) ! Clean map min=-0.0011861 max=0.058178 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1216+0929_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:41:26 2019