! Started logfile: J1215-1731_S_2017_06_15_pus_uvs.log on Tue May 7 15:18:12 2019 obs J1215-1731_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1215-1731_S_2017_06_15_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.67 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 2412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1215-1731_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.551580Jy sigma=0.003936 ! Fit after self-cal, rms=0.512055Jy sigma=0.003670 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=7.621 mas, bpa=4.647 degrees ! Estimated noise=2690.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.414474 Jy ! Component: 100 - total flux cleaned = 0.566393 Jy ! Total flux subtracted in 100 components = 0.566393 Jy ! Clean residual min=-0.062890 max=0.090990 Jy/beam ! Clean residual mean=-0.000067 rms=0.018762 Jy/beam ! Combined flux in latest and established models = 0.566393 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.566393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289624Jy sigma=0.002145 ! Fit after self-cal, rms=0.289601Jy sigma=0.002144 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=8.827 mas, bpa=4.795 degrees ! Estimated noise=2231.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132128 Jy ! Component: 100 - total flux cleaned = 0.208946 Jy ! Component: 150 - total flux cleaned = 0.255121 Jy ! Component: 200 - total flux cleaned = 0.282961 Jy ! Total flux subtracted in 200 components = 0.282961 Jy ! Clean residual min=-0.053195 max=0.076460 Jy/beam ! Clean residual mean=0.000150 rms=0.015747 Jy/beam ! Combined flux in latest and established models = 0.849354 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 32 components and 0.849354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222295Jy sigma=0.001606 ! Fit after self-cal, rms=0.222171Jy sigma=0.001604 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.75 FD 0.83 HN 1.81 KP 0.93 ! LA 0.95 MK 0.99 NL 0.94 OV 0.94 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.97 FD 0.87 HN 1.97 KP 0.91 ! LA 0.89 MK 0.99 NL 1.15 OV 0.96 ! PT 0.91 SC 1.09 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.49 FD 0.89 HN 1.92 KP 0.90 ! LA 1.01 MK 1.03 NL 1.21 OV 0.90 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 2.04 KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.222171Jy sigma=0.001604 ! Fit after self-cal, rms=0.220517Jy sigma=0.001118 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=9.205 mas, bpa=3.981 degrees ! Estimated noise=2402.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119001 Jy ! Component: 100 - total flux cleaned = -0.0145137 Jy ! Component: 150 - total flux cleaned = -0.016719 Jy ! Component: 200 - total flux cleaned = -0.0179823 Jy ! Total flux subtracted in 200 components = -0.0179823 Jy ! Clean residual min=-0.032051 max=0.044514 Jy/beam ! Clean residual mean=-0.000292 rms=0.009852 Jy/beam ! Combined flux in latest and established models = 0.831372 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.831372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212513Jy sigma=0.001078 ! Fit after self-cal, rms=0.213064Jy sigma=0.001076 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213064Jy sigma=0.001076 ! Fit after self-cal, rms=0.234953Jy sigma=0.000879 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=9.285 mas, bpa=3.703 degrees ! Estimated noise=2393.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0079356 Jy ! Component: 100 - total flux cleaned = -0.00916548 Jy ! Component: 150 - total flux cleaned = -0.00988776 Jy ! Component: 200 - total flux cleaned = -0.0108167 Jy ! Total flux subtracted in 200 components = -0.0108167 Jy ! Clean residual min=-0.019271 max=0.043907 Jy/beam ! Clean residual mean=-0.000157 rms=0.006478 Jy/beam ! Combined flux in latest and established models = 0.820555 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.820555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233362Jy sigma=0.000867 ! Fit after self-cal, rms=0.233355Jy sigma=0.000866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355928 Jy ! Component: 100 - total flux cleaned = 0.0427772 Jy ! Component: 150 - total flux cleaned = 0.0436642 Jy ! Component: 200 - total flux cleaned = 0.0440658 Jy ! Total flux subtracted in 200 components = 0.0440658 Jy ! Clean residual min=-0.017806 max=0.024533 Jy/beam ! Clean residual mean=-0.000315 rms=0.004729 Jy/beam ! Combined flux in latest and established models = 0.864621 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 0.864621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227048Jy sigma=0.000788 ! Fit after self-cal, rms=0.226082Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226082Jy sigma=0.000780 ! Fit after self-cal, rms=0.223086Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=9.206 mas, bpa=3.795 degrees ! Estimated noise=2363.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00992341 Jy ! Component: 100 - total flux cleaned = 0.0102975 Jy ! Component: 150 - total flux cleaned = 0.0112533 Jy ! Component: 200 - total flux cleaned = 0.0118116 Jy ! Total flux subtracted in 200 components = 0.0118116 Jy ! Clean residual min=-0.014714 max=0.015685 Jy/beam ! Clean residual mean=-0.000240 rms=0.003791 Jy/beam ! Combined flux in latest and established models = 0.876432 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.876432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221374Jy sigma=0.000748 ! Fit after self-cal, rms=0.221065Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354237 Jy ! Component: 100 - total flux cleaned = 0.00403308 Jy ! Component: 150 - total flux cleaned = 0.00448501 Jy ! Component: 200 - total flux cleaned = 0.00468981 Jy ! Total flux subtracted in 200 components = 0.00468981 Jy ! Clean residual min=-0.014365 max=0.013347 Jy/beam ! Clean residual mean=-0.000256 rms=0.003627 Jy/beam ! Combined flux in latest and established models = 0.881122 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.881122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220501Jy sigma=0.000740 ! Fit after self-cal, rms=0.220406Jy sigma=0.000739 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220406Jy sigma=0.000739 ! Fit after self-cal, rms=0.219348Jy sigma=0.000735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.229 mas, bmaj=17.09 mas, bpa=12.56 degrees ! Estimated noise=2737.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723669 Jy ! Component: 100 - total flux cleaned = 0.00729656 Jy ! Component: 150 - total flux cleaned = 0.00728897 Jy ! Component: 200 - total flux cleaned = 0.00703818 Jy ! Total flux subtracted in 200 components = 0.00703818 Jy ! Clean residual min=-0.015199 max=0.015341 Jy/beam ! Clean residual mean=-0.000411 rms=0.004845 Jy/beam ! Combined flux in latest and established models = 0.88816 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 0.88816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219055Jy sigma=0.000731 ! Fit after self-cal, rms=0.218873Jy sigma=0.000731 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153479 Jy ! Component: 100 - total flux cleaned = 0.00155556 Jy ! Component: 150 - total flux cleaned = 0.0014506 Jy ! Component: 200 - total flux cleaned = 0.00135103 Jy ! Total flux subtracted in 200 components = 0.00135103 Jy ! Clean residual min=-0.015169 max=0.015053 Jy/beam ! Clean residual mean=-0.000418 rms=0.004778 Jy/beam ! Combined flux in latest and established models = 0.889511 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 106 components and 0.889512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218756Jy sigma=0.000729 ! Fit after self-cal, rms=0.218644Jy sigma=0.000729 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.648 mas, bmaj=9.17 mas, bpa=3.925 degrees ! Estimated noise=2348.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.648 x 9.17 at 3.925 degrees (North through East) ! Clean map min=-0.012968 max=0.55519 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218644Jy sigma=0.000729 ! Fit after self-cal, rms=0.240845Jy sigma=0.000680 ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=9.154 mas, bpa=4.079 degrees ! Estimated noise=2339.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475688 Jy ! Component: 100 - total flux cleaned = -0.00106276 Jy ! Component: 150 - total flux cleaned = -0.00121875 Jy ! Component: 200 - total flux cleaned = -0.00121676 Jy ! Total flux subtracted in 200 components = -0.00121676 Jy ! Clean residual min=-0.010593 max=0.012534 Jy/beam ! Clean residual mean=-0.000215 rms=0.003135 Jy/beam ! Combined flux in latest and established models = 0.888295 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.888295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240487Jy sigma=0.000676 ! Fit after self-cal, rms=0.240432Jy sigma=0.000676 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350886 Jy ! Component: 100 - total flux cleaned = 0.000217515 Jy ! Component: 150 - total flux cleaned = -3.62881e-05 Jy ! Component: 200 - total flux cleaned = -0.000154825 Jy ! Total flux subtracted in 200 components = -0.000154825 Jy ! Clean residual min=-0.010524 max=0.012363 Jy/beam ! Clean residual mean=-0.000214 rms=0.003103 Jy/beam ! Combined flux in latest and established models = 0.88814 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.88814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240169Jy sigma=0.000674 ! Fit after self-cal, rms=0.240147Jy sigma=0.000674 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240147Jy sigma=0.000674 ! Fit after self-cal, rms=0.239795Jy sigma=0.000674 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=7.869 mas, bpa=4.124 degrees ! Estimated noise=2936.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.445255 Jy ! Component: 100 - total flux cleaned = 0.599736 Jy ! Component: 150 - total flux cleaned = 0.678299 Jy ! Component: 200 - total flux cleaned = 0.729578 Jy ! Total flux subtracted in 200 components = 0.729578 Jy ! Clean residual min=-0.020122 max=0.033679 Jy/beam ! Clean residual mean=-0.000102 rms=0.006250 Jy/beam ! Combined flux in latest and established models = 0.729578 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.729578 Jy ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=9.143 mas, bpa=4.053 degrees ! Estimated noise=2332.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0470136 Jy ! Component: 100 - total flux cleaned = 0.0764692 Jy ! Component: 150 - total flux cleaned = 0.0972625 Jy ! Component: 200 - total flux cleaned = 0.112618 Jy ! Total flux subtracted in 200 components = 0.112618 Jy ! Clean residual min=-0.012849 max=0.015437 Jy/beam ! Clean residual mean=-0.000069 rms=0.003815 Jy/beam ! Combined flux in latest and established models = 0.842196 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 70 components and 0.842196 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.219 mas, bmaj=17.11 mas, bpa=12.49 degrees ! Estimated noise=2727.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017913 Jy ! Component: 100 - total flux cleaned = 0.0292798 Jy ! Component: 150 - total flux cleaned = 0.0366778 Jy ! Component: 200 - total flux cleaned = 0.0390343 Jy ! Total flux subtracted in 200 components = 0.0390343 Jy ! Clean residual min=-0.014733 max=0.016747 Jy/beam ! Clean residual mean=-0.000354 rms=0.004685 Jy/beam ! Combined flux in latest and established models = 0.881231 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138946 Jy ! Component: 100 - total flux cleaned = 0.00242246 Jy ! Component: 150 - total flux cleaned = 0.00305851 Jy ! Component: 200 - total flux cleaned = 0.00294275 Jy ! Total flux subtracted in 200 components = 0.00294275 Jy ! Clean residual min=-0.014134 max=0.016233 Jy/beam ! Clean residual mean=-0.000370 rms=0.004566 Jy/beam ! Combined flux in latest and established models = 0.884173 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 123 components and 0.884173 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=9.143 mas, bpa=4.053 degrees ! Estimated noise=2332.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143481 Jy ! Component: 100 - total flux cleaned = -0.0018789 Jy ! Component: 150 - total flux cleaned = -0.00245206 Jy ! Component: 200 - total flux cleaned = -0.0027894 Jy ! Total flux subtracted in 200 components = -0.0027894 Jy ! Clean residual min=-0.010505 max=0.013307 Jy/beam ! Clean residual mean=-0.000191 rms=0.003105 Jy/beam ! Combined flux in latest and established models = 0.881384 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 143 components and 0.881384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239669Jy sigma=0.000676 ! Fit after self-cal, rms=0.239598Jy sigma=0.000674 wmodel J1215-1731_S_2017_06_15_pus_map.mod ! Writing 143 model components to file: J1215-1731_S_2017_06_15_pus_map.mod wobs J1215-1731_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1215-1731_S_2017_06_15_pus_uvs.fits wwins J1215-1731_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J1215-1731_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555293 Jy ! Component: 100 - total flux cleaned = 0.0063475 Jy ! Component: 150 - total flux cleaned = 0.00617622 Jy ! Component: 200 - total flux cleaned = 0.00601579 Jy ! Component: 250 - total flux cleaned = 0.00571589 Jy ! Component: 300 - total flux cleaned = 0.00485612 Jy ! Component: 350 - total flux cleaned = 0.00458219 Jy ! Component: 400 - total flux cleaned = 0.00431738 Jy ! Component: 450 - total flux cleaned = 0.00393248 Jy ! Component: 500 - total flux cleaned = 0.00356358 Jy ! Component: 550 - total flux cleaned = 0.00320307 Jy ! Component: 600 - total flux cleaned = 0.00285239 Jy ! Component: 650 - total flux cleaned = 0.00228464 Jy ! Component: 700 - total flux cleaned = 0.00195503 Jy ! Component: 750 - total flux cleaned = 0.00174204 Jy ! Component: 800 - total flux cleaned = 0.00174315 Jy ! Component: 850 - total flux cleaned = 0.00143426 Jy ! Component: 900 - total flux cleaned = 0.0012326 Jy ! Component: 950 - total flux cleaned = 0.000843266 Jy ! Component: 1000 - total flux cleaned = 0.000557722 Jy ! Component: 1050 - total flux cleaned = 9.12147e-05 Jy ! Component: 1100 - total flux cleaned = -0.000181878 Jy ! Component: 1150 - total flux cleaned = -0.000537762 Jy ! Component: 1200 - total flux cleaned = -0.000800417 Jy ! Component: 1250 - total flux cleaned = -0.000972752 Jy ! Component: 1300 - total flux cleaned = -0.00139638 Jy ! Component: 1350 - total flux cleaned = -0.00164596 Jy ! Component: 1400 - total flux cleaned = -0.00213487 Jy ! Component: 1450 - total flux cleaned = -0.00237486 Jy ! Component: 1500 - total flux cleaned = -0.00269003 Jy ! Component: 1550 - total flux cleaned = -0.00315472 Jy ! Component: 1600 - total flux cleaned = -0.00338166 Jy ! Component: 1650 - total flux cleaned = -0.00375619 Jy ! Component: 1700 - total flux cleaned = -0.00419969 Jy ! Component: 1750 - total flux cleaned = -0.00463536 Jy ! Component: 1800 - total flux cleaned = -0.0049925 Jy ! Component: 1850 - total flux cleaned = -0.00513412 Jy ! Component: 1900 - total flux cleaned = -0.0054825 Jy ! Component: 1950 - total flux cleaned = -0.00575744 Jy ! Component: 2000 - total flux cleaned = -0.00609551 Jy ! Component: 2050 - total flux cleaned = -0.00636225 Jy ! Component: 2100 - total flux cleaned = -0.00662452 Jy ! Component: 2150 - total flux cleaned = -0.00675387 Jy ! Component: 2200 - total flux cleaned = -0.0070756 Jy ! Component: 2250 - total flux cleaned = -0.00751921 Jy ! Component: 2300 - total flux cleaned = -0.00776926 Jy ! Component: 2350 - total flux cleaned = -0.00832543 Jy ! Component: 2400 - total flux cleaned = -0.00856857 Jy ! Component: 2450 - total flux cleaned = -0.00881013 Jy ! Component: 2500 - total flux cleaned = -0.00898963 Jy ! Component: 2550 - total flux cleaned = -0.00928499 Jy ! Component: 2600 - total flux cleaned = -0.00951937 Jy ! Component: 2650 - total flux cleaned = -0.00980832 Jy ! Component: 2700 - total flux cleaned = -0.0100367 Jy ! Component: 2750 - total flux cleaned = -0.0103756 Jy ! Component: 2800 - total flux cleaned = -0.0106545 Jy ! Component: 2850 - total flux cleaned = -0.0108209 Jy ! Component: 2900 - total flux cleaned = -0.0112045 Jy ! Component: 2950 - total flux cleaned = -0.0114758 Jy ! Component: 3000 - total flux cleaned = -0.011637 Jy ! Component: 3050 - total flux cleaned = -0.0117974 Jy ! Component: 3100 - total flux cleaned = -0.0121679 Jy ! Component: 3150 - total flux cleaned = -0.0124833 Jy ! Component: 3200 - total flux cleaned = -0.0126912 Jy ! Component: 3250 - total flux cleaned = -0.0129491 Jy ! Component: 3300 - total flux cleaned = -0.013205 Jy ! Component: 3350 - total flux cleaned = -0.0133571 Jy ! Component: 3400 - total flux cleaned = -0.0135082 Jy ! Component: 3450 - total flux cleaned = -0.0136081 Jy ! Component: 3500 - total flux cleaned = -0.0136578 Jy ! Component: 3550 - total flux cleaned = -0.0139039 Jy ! Component: 3600 - total flux cleaned = -0.0139529 Jy ! Component: 3650 - total flux cleaned = -0.0139529 Jy ! Component: 3700 - total flux cleaned = -0.014098 Jy ! Component: 3750 - total flux cleaned = -0.01405 Jy ! Component: 3800 - total flux cleaned = -0.014098 Jy ! Component: 3850 - total flux cleaned = -0.0139084 Jy ! Component: 3900 - total flux cleaned = -0.0138142 Jy ! Component: 3950 - total flux cleaned = -0.0136267 Jy ! Component: 4000 - total flux cleaned = -0.0135332 Jy ! Component: 4050 - total flux cleaned = -0.0133466 Jy ! Total flux subtracted in 4096 components = -0.0132077 Jy ! Clean residual min=-0.003083 max=0.002715 Jy/beam ! Clean residual mean=-0.000040 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.868176 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 424 components and 0.868176 Jy ![Exited script file: muppet] wmap "J1215-1731_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.633 x 9.143 at 4.053 degrees (North through East) ! Clean map min=-0.0069786 max=0.57701 Jy/beam ! Writing clean map to FITS file: J1215-1731_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.577014 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0008259 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.4294 0.4294 0.8588 1.7176 3.4352 6.8704 13.7408 27.4816 54.9632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.577 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.633 x 9.143 at 4.053 degrees (North through East) ! Clean map min=-0.0069786 max=0.57701 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1215-1731_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:18:17 2019