! Started logfile: J1215-1731_S_2017_06_10_pus_uvs.log on Mon May 6 14:52:42 2019 obs J1215-1731_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1215-1731_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.395556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1215-1731_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.431994Jy sigma=0.003410 ! Fit after self-cal, rms=0.347389Jy sigma=0.002694 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.379 mas, bmaj=11.92 mas, bpa=23.84 degrees ! Estimated noise=4526.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.559377 Jy ! Component: 100 - total flux cleaned = 0.740734 Jy ! Total flux subtracted in 100 components = 0.740734 Jy ! Clean residual min=-0.051276 max=0.076396 Jy/beam ! Clean residual mean=-0.000120 rms=0.018559 Jy/beam ! Combined flux in latest and established models = 0.740734 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.740734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182196Jy sigma=0.001442 ! Fit after self-cal, rms=0.181966Jy sigma=0.001441 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=13.66 mas, bpa=23.8 degrees ! Estimated noise=3890.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0980076 Jy ! Component: 100 - total flux cleaned = 0.14944 Jy ! Component: 150 - total flux cleaned = 0.181584 Jy ! Component: 200 - total flux cleaned = 0.202666 Jy ! Total flux subtracted in 200 components = 0.202666 Jy ! Clean residual min=-0.030920 max=0.053473 Jy/beam ! Clean residual mean=-0.000028 rms=0.010865 Jy/beam ! Combined flux in latest and established models = 0.943399 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 46 components and 0.943399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121087Jy sigma=0.000938 ! Fit after self-cal, rms=0.120619Jy sigma=0.000934 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00 KP 1.02 ! LA 1.02 MK 1.00* NL 0.89 OV 1.04 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.04 KP 0.97 ! LA 0.95 MK 1.00* NL 1.05 OV 1.08 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.02 KP 0.96 ! LA 0.98 MK 1.00* NL 0.97 OV 0.98 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.120619Jy sigma=0.000934 ! Fit after self-cal, rms=0.108159Jy sigma=0.000853 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=13.69 mas, bpa=23.85 degrees ! Estimated noise=3848.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439956 Jy ! Component: 100 - total flux cleaned = 0.0555474 Jy ! Component: 150 - total flux cleaned = 0.060538 Jy ! Component: 200 - total flux cleaned = 0.0631453 Jy ! Total flux subtracted in 200 components = 0.0631453 Jy ! Clean residual min=-0.014718 max=0.015274 Jy/beam ! Clean residual mean=-0.000012 rms=0.004591 Jy/beam ! Combined flux in latest and established models = 1.00654 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 75 components and 1.00654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090417Jy sigma=0.000702 ! Fit after self-cal, rms=0.089833Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089833Jy sigma=0.000697 ! Fit after self-cal, rms=0.088557Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=13.69 mas, bpa=23.81 degrees ! Estimated noise=3818.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011042 Jy ! Component: 100 - total flux cleaned = 0.0143833 Jy ! Component: 150 - total flux cleaned = 0.0137844 Jy ! Component: 200 - total flux cleaned = 0.0130786 Jy ! Total flux subtracted in 200 components = 0.0130786 Jy ! Clean residual min=-0.010536 max=0.011501 Jy/beam ! Clean residual mean=-0.000001 rms=0.003112 Jy/beam ! Combined flux in latest and established models = 1.01962 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 105 components and 1.01962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087035Jy sigma=0.000675 ! Fit after self-cal, rms=0.086974Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000783105 Jy ! Component: 100 - total flux cleaned = -0.000197652 Jy ! Component: 150 - total flux cleaned = -0.00124072 Jy ! Component: 200 - total flux cleaned = -0.00208762 Jy ! Total flux subtracted in 200 components = -0.00208762 Jy ! Clean residual min=-0.009070 max=0.010936 Jy/beam ! Clean residual mean=-0.000002 rms=0.002859 Jy/beam ! Combined flux in latest and established models = 1.01754 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 1.01754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086613Jy sigma=0.000671 ! Fit after self-cal, rms=0.086593Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086593Jy sigma=0.000671 ! Fit after self-cal, rms=0.086423Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=13.7 mas, bpa=23.8 degrees ! Estimated noise=3808.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110025 Jy ! Component: 100 - total flux cleaned = 0.000871966 Jy ! Component: 150 - total flux cleaned = 0.000339445 Jy ! Component: 200 - total flux cleaned = 4.61182e-05 Jy ! Total flux subtracted in 200 components = 4.61182e-05 Jy ! Clean residual min=-0.008217 max=0.010066 Jy/beam ! Clean residual mean=0.000002 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 1.01758 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 1.01758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086182Jy sigma=0.000667 ! Fit after self-cal, rms=0.086171Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000780079 Jy ! Component: 100 - total flux cleaned = -0.00112409 Jy ! Component: 150 - total flux cleaned = -0.00152415 Jy ! Component: 200 - total flux cleaned = -0.00197295 Jy ! Total flux subtracted in 200 components = -0.00197295 Jy ! Clean residual min=-0.007830 max=0.009747 Jy/beam ! Clean residual mean=0.000003 rms=0.002402 Jy/beam ! Combined flux in latest and established models = 1.01561 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 149 components and 1.01561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086047Jy sigma=0.000666 ! Fit after self-cal, rms=0.086035Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086035Jy sigma=0.000666 ! Fit after self-cal, rms=0.085982Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.313 mas, bmaj=18.24 mas, bpa=7.909 degrees ! Estimated noise=4403.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703258 Jy ! Component: 100 - total flux cleaned = -0.000481984 Jy ! Component: 150 - total flux cleaned = -0.00133468 Jy ! Component: 200 - total flux cleaned = -0.0023038 Jy ! Total flux subtracted in 200 components = -0.0023038 Jy ! Clean residual min=-0.008652 max=0.010774 Jy/beam ! Clean residual mean=0.000003 rms=0.003197 Jy/beam ! Combined flux in latest and established models = 1.01331 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 182 components and 1.01331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085896Jy sigma=0.000664 ! Fit after self-cal, rms=0.085880Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172506 Jy ! Component: 100 - total flux cleaned = -0.00234826 Jy ! Component: 150 - total flux cleaned = -0.00316976 Jy ! Component: 200 - total flux cleaned = -0.00392498 Jy ! Total flux subtracted in 200 components = -0.00392498 Jy ! Clean residual min=-0.008346 max=0.010342 Jy/beam ! Clean residual mean=0.000003 rms=0.003035 Jy/beam ! Combined flux in latest and established models = 1.00938 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 207 components and 1.00938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085833Jy sigma=0.000664 ! Fit after self-cal, rms=0.085824Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=13.7 mas, bpa=23.81 degrees ! Estimated noise=3805.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.791 x 13.7 at 23.81 degrees (North through East) ! Clean map min=-0.009505 max=0.71961 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085824Jy sigma=0.000664 ! Fit after self-cal, rms=0.079457Jy sigma=0.000610 ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=13.71 mas, bpa=23.81 degrees ! Estimated noise=3802.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217136 Jy ! Component: 100 - total flux cleaned = -0.00360853 Jy ! Component: 150 - total flux cleaned = -0.00470802 Jy ! Component: 200 - total flux cleaned = -0.00555598 Jy ! Total flux subtracted in 200 components = -0.00555598 Jy ! Clean residual min=-0.006906 max=0.008174 Jy/beam ! Clean residual mean=0.000003 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 1.00382 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 233 components and 1.00382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079326Jy sigma=0.000609 ! Fit after self-cal, rms=0.079313Jy sigma=0.000608 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111607 Jy ! Component: 100 - total flux cleaned = -0.00178171 Jy ! Component: 150 - total flux cleaned = -0.00254513 Jy ! Component: 200 - total flux cleaned = -0.0032094 Jy ! Total flux subtracted in 200 components = -0.0032094 Jy ! Clean residual min=-0.006573 max=0.008079 Jy/beam ! Clean residual mean=0.000003 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 1.00062 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 243 components and 1.00061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079252Jy sigma=0.000608 ! Fit after self-cal, rms=0.079245Jy sigma=0.000608 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079245Jy sigma=0.000608 ! Fit after self-cal, rms=0.079228Jy sigma=0.000608 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.396 mas, bmaj=11.97 mas, bpa=23.79 degrees ! Estimated noise=4437.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.547477 Jy ! Component: 100 - total flux cleaned = 0.722343 Jy ! Component: 150 - total flux cleaned = 0.803326 Jy ! Component: 200 - total flux cleaned = 0.855517 Jy ! Total flux subtracted in 200 components = 0.855517 Jy ! Clean residual min=-0.028703 max=0.033264 Jy/beam ! Clean residual mean=-0.000032 rms=0.009235 Jy/beam ! Combined flux in latest and established models = 0.855518 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.855518 Jy ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=13.71 mas, bpa=23.82 degrees ! Estimated noise=3802.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457506 Jy ! Component: 100 - total flux cleaned = 0.0767251 Jy ! Component: 150 - total flux cleaned = 0.0988868 Jy ! Component: 200 - total flux cleaned = 0.115338 Jy ! Total flux subtracted in 200 components = 0.115338 Jy ! Clean residual min=-0.018982 max=0.014401 Jy/beam ! Clean residual mean=-0.000012 rms=0.005209 Jy/beam ! Combined flux in latest and established models = 0.970855 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 61 components and 0.970855 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.314 mas, bmaj=18.23 mas, bpa=7.939 degrees ! Estimated noise=4403.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177329 Jy ! Component: 100 - total flux cleaned = 0.0287979 Jy ! Component: 150 - total flux cleaned = 0.0364911 Jy ! Component: 200 - total flux cleaned = 0.0419294 Jy ! Total flux subtracted in 200 components = 0.0419294 Jy ! Clean residual min=-0.014199 max=0.012601 Jy/beam ! Clean residual mean=-0.000011 rms=0.004834 Jy/beam ! Combined flux in latest and established models = 1.01278 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060216 Jy ! Component: 100 - total flux cleaned = 0.000608021 Jy ! Component: 150 - total flux cleaned = -0.00011594 Jy ! Component: 200 - total flux cleaned = -0.000995974 Jy ! Total flux subtracted in 200 components = -0.000995974 Jy ! Clean residual min=-0.010267 max=0.010799 Jy/beam ! Clean residual mean=-0.000007 rms=0.003847 Jy/beam ! Combined flux in latest and established models = 1.01179 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 145 components and 1.01179 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=13.71 mas, bpa=23.82 degrees ! Estimated noise=3802.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0040188 Jy ! Component: 100 - total flux cleaned = -0.00450392 Jy ! Component: 150 - total flux cleaned = -0.00660472 Jy ! Component: 200 - total flux cleaned = -0.00846694 Jy ! Total flux subtracted in 200 components = -0.00846694 Jy ! Clean residual min=-0.009250 max=0.008934 Jy/beam ! Clean residual mean=-0.000002 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 1.00332 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 164 components and 1.00332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079955Jy sigma=0.000615 ! Fit after self-cal, rms=0.079925Jy sigma=0.000614 wmodel J1215-1731_S_2017_06_10_pus_map.mod ! Writing 164 model components to file: J1215-1731_S_2017_06_10_pus_map.mod wobs J1215-1731_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1215-1731_S_2017_06_10_pus_uvs.fits wwins J1215-1731_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J1215-1731_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975209 Jy ! Component: 100 - total flux cleaned = 0.000857148 Jy ! Component: 150 - total flux cleaned = 0.000236788 Jy ! Component: 200 - total flux cleaned = 0.000803859 Jy ! Component: 250 - total flux cleaned = 0.00133574 Jy ! Component: 300 - total flux cleaned = 0.00163698 Jy ! Component: 350 - total flux cleaned = 0.00191822 Jy ! Component: 400 - total flux cleaned = 0.00226968 Jy ! Component: 450 - total flux cleaned = 0.00260158 Jy ! Component: 500 - total flux cleaned = 0.00299423 Jy ! Component: 550 - total flux cleaned = 0.00329326 Jy ! Component: 600 - total flux cleaned = 0.00378902 Jy ! Component: 650 - total flux cleaned = 0.00412696 Jy ! Component: 700 - total flux cleaned = 0.00451581 Jy ! Component: 750 - total flux cleaned = 0.00482713 Jy ! Component: 800 - total flux cleaned = 0.00512837 Jy ! Component: 850 - total flux cleaned = 0.00530262 Jy ! Component: 900 - total flux cleaned = 0.0055283 Jy ! Component: 950 - total flux cleaned = 0.00552835 Jy ! Component: 1000 - total flux cleaned = 0.00552903 Jy ! Component: 1050 - total flux cleaned = 0.00547773 Jy ! Component: 1100 - total flux cleaned = 0.00532809 Jy ! Component: 1150 - total flux cleaned = 0.00537695 Jy ! Component: 1200 - total flux cleaned = 0.00528216 Jy ! Component: 1250 - total flux cleaned = 0.00532945 Jy ! Component: 1300 - total flux cleaned = 0.00514801 Jy ! Component: 1350 - total flux cleaned = 0.00483567 Jy ! Component: 1400 - total flux cleaned = 0.00448558 Jy ! Component: 1450 - total flux cleaned = 0.00418382 Jy ! Component: 1500 - total flux cleaned = 0.0038862 Jy ! Component: 1550 - total flux cleaned = 0.0036765 Jy ! Component: 1600 - total flux cleaned = 0.00346918 Jy ! Component: 1650 - total flux cleaned = 0.00318353 Jy ! Component: 1700 - total flux cleaned = 0.00294175 Jy ! Component: 1750 - total flux cleaned = 0.00262333 Jy ! Component: 1800 - total flux cleaned = 0.0025443 Jy ! Component: 1850 - total flux cleaned = 0.00234824 Jy ! Component: 1900 - total flux cleaned = 0.00227055 Jy ! Component: 1950 - total flux cleaned = 0.00215449 Jy ! Component: 2000 - total flux cleaned = 0.00196206 Jy ! Component: 2050 - total flux cleaned = 0.0017704 Jy ! Component: 2100 - total flux cleaned = 0.00161736 Jy ! Component: 2150 - total flux cleaned = 0.00150292 Jy ! Component: 2200 - total flux cleaned = 0.00142683 Jy ! Component: 2250 - total flux cleaned = 0.00142708 Jy ! Component: 2300 - total flux cleaned = 0.00138865 Jy ! Component: 2350 - total flux cleaned = 0.0013115 Jy ! Component: 2400 - total flux cleaned = 0.00131137 Jy ! Component: 2450 - total flux cleaned = 0.00135021 Jy ! Component: 2500 - total flux cleaned = 0.00135055 Jy ! Component: 2550 - total flux cleaned = 0.00142863 Jy ! Component: 2600 - total flux cleaned = 0.00142905 Jy ! Component: 2650 - total flux cleaned = 0.00142904 Jy ! Component: 2700 - total flux cleaned = 0.00146938 Jy ! Component: 2750 - total flux cleaned = 0.00150966 Jy ! Component: 2800 - total flux cleaned = 0.00155025 Jy ! Component: 2850 - total flux cleaned = 0.00163221 Jy ! Component: 2900 - total flux cleaned = 0.00159065 Jy ! Component: 2950 - total flux cleaned = 0.00167402 Jy ! Component: 3000 - total flux cleaned = 0.00167455 Jy ! Component: 3050 - total flux cleaned = 0.00163227 Jy ! Component: 3100 - total flux cleaned = 0.00158905 Jy ! Component: 3150 - total flux cleaned = 0.00154552 Jy ! Component: 3200 - total flux cleaned = 0.00150158 Jy ! Component: 3250 - total flux cleaned = 0.00145665 Jy ! Component: 3300 - total flux cleaned = 0.00136535 Jy ! Component: 3350 - total flux cleaned = 0.00136506 Jy ! Component: 3400 - total flux cleaned = 0.00117723 Jy ! Component: 3450 - total flux cleaned = 0.00108119 Jy ! Component: 3500 - total flux cleaned = 0.00103199 Jy ! Component: 3550 - total flux cleaned = 0.000933934 Jy ! Component: 3600 - total flux cleaned = 0.000833573 Jy ! Component: 3650 - total flux cleaned = 0.000731942 Jy ! Component: 3700 - total flux cleaned = 0.000628244 Jy ! Component: 3750 - total flux cleaned = 0.000576038 Jy ! Component: 3800 - total flux cleaned = 0.000416128 Jy ! Component: 3850 - total flux cleaned = 0.000361596 Jy ! Component: 3900 - total flux cleaned = 0.000306906 Jy ! Component: 3950 - total flux cleaned = 0.000194831 Jy ! Component: 4000 - total flux cleaned = 8.10052e-05 Jy ! Component: 4050 - total flux cleaned = -0.000150907 Jy ! Total flux subtracted in 4096 components = -0.000269248 Jy ! Clean residual min=-0.003395 max=0.003923 Jy/beam ! Clean residual mean=-0.000008 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 1.00305 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 427 components and 1.00305 Jy ![Exited script file: muppet] wmap "J1215-1731_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.788 x 13.71 at 23.82 degrees (North through East) ! Clean map min=-0.010445 max=0.71988 Jy/beam ! Writing clean map to FITS file: J1215-1731_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.719877 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00100061 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.41699 0.41699 0.833981 1.66796 3.33592 6.67185 13.3437 26.6874 53.3748 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.719 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.788 x 13.71 at 23.82 degrees (North through East) ! Clean map min=-0.010445 max=0.71988 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1215-1731_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:52:46 2019