! Started logfile: J1215-1731_S_2017_05_01_pus_uvs.log on Wed May 1 18:35:13 2019 obs J1215-1731_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1215-1731_S_2017_05_01_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.469444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 2028 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1215-1731_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 111 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.389404Jy sigma=0.053276 ! Fit after self-cal, rms=0.343553Jy sigma=0.053825 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.776 mas, bmaj=13.19 mas, bpa=8.469 degrees ! Estimated noise=1770 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.3191 Jy ! Component: 100 - total flux cleaned = 0.402403 Jy ! Total flux subtracted in 100 components = 0.402403 Jy ! Clean residual min=-0.189464 max=0.216540 Jy/beam ! Clean residual mean=-0.000402 rms=0.073331 Jy/beam ! Combined flux in latest and established models = 0.402403 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.402403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.603185Jy sigma=0.020864 ! Fit after self-cal, rms=0.603136Jy sigma=0.020864 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.108 mas, bmaj=16.16 mas, bpa=10.82 degrees ! Estimated noise=1041.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0698606 Jy ! Component: 100 - total flux cleaned = -0.0753906 Jy ! Component: 150 - total flux cleaned = -0.0769847 Jy ! Component: 200 - total flux cleaned = -0.0797368 Jy ! Total flux subtracted in 200 components = -0.0797368 Jy ! Clean residual min=-0.181454 max=0.203206 Jy/beam ! Clean residual mean=-0.000577 rms=0.065755 Jy/beam ! Combined flux in latest and established models = 0.322666 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.322666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.606717Jy sigma=0.018370 ! Fit after self-cal, rms=0.606554Jy sigma=0.018370 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.48 HN 0.86 KP 0.61 ! LA 0.54 MK 1.00* NL 0.81 OV 0.56 ! PT 0.54 SC 1.23 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.50 HN 0.88 KP 0.58 ! LA 0.52 MK 1.00* NL 0.85 OV 0.58 ! PT 0.53 SC 1.31 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.62 FD 0.52 HN 0.84 KP 0.60 ! LA 0.54 MK 1.00* NL 0.84 OV 0.53 ! PT 0.52 SC 1.30 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.56 HN 1.05 KP 1.00* ! LA 29.32 MK 1.00* NL 1.00* OV 1.00* ! PT 0.54 SC 1.00* ! ! ! Fit before self-cal, rms=0.606554Jy sigma=0.018370 ! Fit after self-cal, rms=0.115285Jy sigma=0.001248 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.71 mas, bmaj=15.08 mas, bpa=11.83 degrees ! Estimated noise=1029.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190308 Jy ! Component: 100 - total flux cleaned = 0.0225894 Jy ! Component: 150 - total flux cleaned = 0.0225911 Jy ! Component: 200 - total flux cleaned = 0.0222064 Jy ! Total flux subtracted in 200 components = 0.0222064 Jy ! Clean residual min=-0.016236 max=0.024597 Jy/beam ! Clean residual mean=0.000072 rms=0.005466 Jy/beam ! Combined flux in latest and established models = 0.344872 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.344872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105501Jy sigma=0.001130 ! Fit after self-cal, rms=0.104597Jy sigma=0.001112 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104597Jy sigma=0.001112 ! Fit after self-cal, rms=0.087258Jy sigma=0.001067 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.602 mas, bmaj=14.78 mas, bpa=12.21 degrees ! Estimated noise=1025.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150906 Jy ! Component: 100 - total flux cleaned = 0.0162903 Jy ! Component: 150 - total flux cleaned = 0.0163003 Jy ! Component: 200 - total flux cleaned = 0.0162733 Jy ! Total flux subtracted in 200 components = 0.0162733 Jy ! Clean residual min=-0.013646 max=0.021453 Jy/beam ! Clean residual mean=0.000060 rms=0.004716 Jy/beam ! Combined flux in latest and established models = 0.361145 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.361145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082509Jy sigma=0.001010 ! Fit after self-cal, rms=0.082217Jy sigma=0.001009 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19.5, -39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00970878 Jy ! Component: 100 - total flux cleaned = 0.00592885 Jy ! Component: 150 - total flux cleaned = 0.00342808 Jy ! Component: 200 - total flux cleaned = 0.00245373 Jy ! Total flux subtracted in 200 components = 0.00245373 Jy ! Clean residual min=-0.014534 max=0.015750 Jy/beam ! Clean residual mean=0.000055 rms=0.003955 Jy/beam ! Combined flux in latest and established models = 0.363599 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 70 components and 0.363599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073744Jy sigma=0.000917 ! Fit after self-cal, rms=0.073685Jy sigma=0.000910 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073685Jy sigma=0.000910 ! Fit after self-cal, rms=0.067667Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.546 mas, bmaj=14.63 mas, bpa=12.35 degrees ! Estimated noise=1025.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419763 Jy ! Component: 100 - total flux cleaned = 0.00483241 Jy ! Component: 150 - total flux cleaned = 0.00457583 Jy ! Component: 200 - total flux cleaned = 0.00361759 Jy ! Total flux subtracted in 200 components = 0.00361759 Jy ! Clean residual min=-0.010524 max=0.014692 Jy/beam ! Clean residual mean=0.000042 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 0.367217 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 0.367217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064081Jy sigma=0.000850 ! Fit after self-cal, rms=0.063963Jy sigma=0.000847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-39.5, -81.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126018 Jy ! Component: 100 - total flux cleaned = 0.0119485 Jy ! Component: 150 - total flux cleaned = 0.0122091 Jy ! Component: 200 - total flux cleaned = 0.0110304 Jy ! Total flux subtracted in 200 components = 0.0110304 Jy ! Clean residual min=-0.007662 max=0.010850 Jy/beam ! Clean residual mean=0.000020 rms=0.002595 Jy/beam ! Combined flux in latest and established models = 0.378247 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 113 components and 0.378247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058916Jy sigma=0.000775 ! Fit after self-cal, rms=0.058794Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058794Jy sigma=0.000773 ! Fit after self-cal, rms=0.056252Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.787 mas, bmaj=19.15 mas, bpa=4.071 degrees ! Estimated noise=1038.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000841858 Jy ! Component: 100 - total flux cleaned = 0.000668478 Jy ! Component: 150 - total flux cleaned = 0.000215729 Jy ! Component: 200 - total flux cleaned = -0.000711075 Jy ! Total flux subtracted in 200 components = -0.000711075 Jy ! Clean residual min=-0.006699 max=0.009422 Jy/beam ! Clean residual mean=0.000020 rms=0.002459 Jy/beam ! Combined flux in latest and established models = 0.377536 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 128 components and 0.377536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055227Jy sigma=0.000749 ! Fit after self-cal, rms=0.055180Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00089348 Jy ! Component: 100 - total flux cleaned = -0.00221043 Jy ! Component: 150 - total flux cleaned = -0.00307088 Jy ! Component: 200 - total flux cleaned = -0.00385316 Jy ! Total flux subtracted in 200 components = -0.00385316 Jy ! Clean residual min=-0.006434 max=0.008799 Jy/beam ! Clean residual mean=0.000015 rms=0.002254 Jy/beam ! Combined flux in latest and established models = 0.373683 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 140 components and 0.373683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054708Jy sigma=0.000740 ! Fit after self-cal, rms=0.054695Jy sigma=0.000739 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.52 mas, bmaj=14.55 mas, bpa=12.35 degrees ! Estimated noise=1022.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.52 x 14.55 at 12.35 degrees (North through East) ! Clean map min=-0.012794 max=0.37539 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.676 mas, bmaj=13.06 mas, bpa=13.27 degrees ! Estimated noise=1611.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.290583 Jy ! Component: 100 - total flux cleaned = 0.357124 Jy ! Component: 150 - total flux cleaned = 0.384535 Jy ! Component: 200 - total flux cleaned = 0.398109 Jy ! Total flux subtracted in 200 components = 0.398109 Jy ! Clean residual min=-0.020331 max=0.019017 Jy/beam ! Clean residual mean=0.000059 rms=0.005369 Jy/beam ! Combined flux in latest and established models = 0.398108 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.398108 Jy ! Inverting map and beam ! Estimated beam: bmin=4.52 mas, bmaj=14.55 mas, bpa=12.35 degrees ! Estimated noise=1022.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695998 Jy ! Component: 100 - total flux cleaned = 0.0113634 Jy ! Component: 150 - total flux cleaned = 0.0129592 Jy ! Component: 200 - total flux cleaned = 0.0125039 Jy ! Total flux subtracted in 200 components = 0.0125039 Jy ! Clean residual min=-0.013983 max=0.015232 Jy/beam ! Clean residual mean=0.000057 rms=0.003858 Jy/beam ! Combined flux in latest and established models = 0.410612 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 52 components and 0.410612 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.787 mas, bmaj=19.15 mas, bpa=4.071 degrees ! Estimated noise=1038.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0101492 Jy ! Component: 100 - total flux cleaned = -0.0133042 Jy ! Component: 150 - total flux cleaned = -0.0152766 Jy ! Component: 200 - total flux cleaned = -0.0175878 Jy ! Total flux subtracted in 200 components = -0.0175878 Jy ! Clean residual min=-0.010144 max=0.010950 Jy/beam ! Clean residual mean=0.000044 rms=0.003075 Jy/beam ! Combined flux in latest and established models = 0.393025 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00236949 Jy ! Component: 100 - total flux cleaned = -0.00458211 Jy ! Component: 150 - total flux cleaned = -0.00664756 Jy ! Component: 200 - total flux cleaned = -0.00876301 Jy ! Total flux subtracted in 200 components = -0.00876301 Jy ! Clean residual min=-0.009285 max=0.009849 Jy/beam ! Clean residual mean=0.000033 rms=0.002717 Jy/beam ! Combined flux in latest and established models = 0.384262 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 87 components and 0.384262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.52 mas, bmaj=14.55 mas, bpa=12.35 degrees ! Estimated noise=1022.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.33185e-05 Jy ! Component: 100 - total flux cleaned = 0.000278993 Jy ! Component: 150 - total flux cleaned = 0.000285769 Jy ! Component: 200 - total flux cleaned = -2.67613e-06 Jy ! Total flux subtracted in 200 components = -2.67613e-06 Jy ! Clean residual min=-0.011464 max=0.011788 Jy/beam ! Clean residual mean=0.000027 rms=0.002776 Jy/beam ! Combined flux in latest and established models = 0.384259 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 115 components and 0.384259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064765Jy sigma=0.000799 ! Fit after self-cal, rms=0.064820Jy sigma=0.000797 wmodel J1215-1731_S_2017_05_01_pus_map.mod ! Writing 115 model components to file: J1215-1731_S_2017_05_01_pus_map.mod wobs J1215-1731_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1215-1731_S_2017_05_01_pus_uvs.fits wwins J1215-1731_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J1215-1731_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770095 Jy ! Component: 100 - total flux cleaned = -0.000109502 Jy ! Component: 150 - total flux cleaned = 4.47437e-05 Jy ! Component: 200 - total flux cleaned = 0.00102771 Jy ! Component: 250 - total flux cleaned = 0.00234205 Jy ! Component: 300 - total flux cleaned = 0.00370431 Jy ! Component: 350 - total flux cleaned = 0.00522834 Jy ! Component: 400 - total flux cleaned = 0.00690239 Jy ! Component: 450 - total flux cleaned = 0.00808128 Jy ! Component: 500 - total flux cleaned = 0.00942459 Jy ! Component: 550 - total flux cleaned = 0.0105194 Jy ! Component: 600 - total flux cleaned = 0.0115777 Jy ! Component: 650 - total flux cleaned = 0.0123231 Jy ! Component: 700 - total flux cleaned = 0.0131374 Jy ! Component: 750 - total flux cleaned = 0.0140123 Jy ! Component: 800 - total flux cleaned = 0.0148627 Jy ! Component: 850 - total flux cleaned = 0.0156083 Jy ! Component: 900 - total flux cleaned = 0.016256 Jy ! Component: 950 - total flux cleaned = 0.0171229 Jy ! Component: 1000 - total flux cleaned = 0.0177379 Jy ! Component: 1050 - total flux cleaned = 0.0181884 Jy ! Component: 1100 - total flux cleaned = 0.0187032 Jy ! Component: 1150 - total flux cleaned = 0.0193498 Jy ! Component: 1200 - total flux cleaned = 0.0199113 Jy ! Component: 1250 - total flux cleaned = 0.0205311 Jy ! Component: 1300 - total flux cleaned = 0.0208687 Jy ! Component: 1350 - total flux cleaned = 0.0213326 Jy ! Component: 1400 - total flux cleaned = 0.0217891 Jy ! Component: 1450 - total flux cleaned = 0.0222369 Jy ! Component: 1500 - total flux cleaned = 0.0226145 Jy ! Component: 1550 - total flux cleaned = 0.0230475 Jy ! Component: 1600 - total flux cleaned = 0.0234733 Jy ! Component: 1650 - total flux cleaned = 0.0240095 Jy ! Component: 1700 - total flux cleaned = 0.0244788 Jy ! Component: 1750 - total flux cleaned = 0.0249399 Jy ! Component: 1800 - total flux cleaned = 0.0252806 Jy ! Component: 1850 - total flux cleaned = 0.0257837 Jy ! Component: 1900 - total flux cleaned = 0.0261683 Jy ! Component: 1950 - total flux cleaned = 0.026601 Jy ! Component: 2000 - total flux cleaned = 0.0270281 Jy ! Component: 2050 - total flux cleaned = 0.0275527 Jy ! Component: 2100 - total flux cleaned = 0.0278627 Jy ! Component: 2150 - total flux cleaned = 0.028169 Jy ! Component: 2200 - total flux cleaned = 0.0286226 Jy ! Component: 2250 - total flux cleaned = 0.0291687 Jy ! Component: 2300 - total flux cleaned = 0.0295105 Jy ! Component: 2350 - total flux cleaned = 0.0298495 Jy ! Component: 2400 - total flux cleaned = 0.0302796 Jy ! Component: 2450 - total flux cleaned = 0.0304692 Jy ! Component: 2500 - total flux cleaned = 0.0307979 Jy ! Component: 2550 - total flux cleaned = 0.0311228 Jy ! Component: 2600 - total flux cleaned = 0.0314447 Jy ! Component: 2650 - total flux cleaned = 0.0316723 Jy ! Component: 2700 - total flux cleaned = 0.0318981 Jy ! Component: 2750 - total flux cleaned = 0.0321671 Jy ! Component: 2800 - total flux cleaned = 0.0325232 Jy ! Component: 2850 - total flux cleaned = 0.0327439 Jy ! Component: 2900 - total flux cleaned = 0.0329636 Jy ! Component: 2950 - total flux cleaned = 0.0332693 Jy ! Component: 3000 - total flux cleaned = 0.0334423 Jy ! Component: 3050 - total flux cleaned = 0.0335711 Jy ! Component: 3100 - total flux cleaned = 0.0337851 Jy ! Component: 3150 - total flux cleaned = 0.03387 Jy ! Component: 3200 - total flux cleaned = 0.0340391 Jy ! Component: 3250 - total flux cleaned = 0.0341654 Jy ! Component: 3300 - total flux cleaned = 0.0343329 Jy ! Component: 3350 - total flux cleaned = 0.0345413 Jy ! Component: 3400 - total flux cleaned = 0.0345829 Jy ! Component: 3450 - total flux cleaned = 0.0347897 Jy ! Component: 3500 - total flux cleaned = 0.0348722 Jy ! Component: 3550 - total flux cleaned = 0.0350368 Jy ! Component: 3600 - total flux cleaned = 0.0352008 Jy ! Component: 3650 - total flux cleaned = 0.035201 Jy ! Component: 3700 - total flux cleaned = 0.0353232 Jy ! Component: 3750 - total flux cleaned = 0.0353639 Jy ! Component: 3800 - total flux cleaned = 0.0354045 Jy ! Component: 3850 - total flux cleaned = 0.0355257 Jy ! Component: 3900 - total flux cleaned = 0.0356465 Jy ! Component: 3950 - total flux cleaned = 0.0356868 Jy ! Component: 4000 - total flux cleaned = 0.035807 Jy ! Component: 4050 - total flux cleaned = 0.0358471 Jy ! Total flux subtracted in 4096 components = 0.0359669 Jy ! Clean residual min=-0.002540 max=0.002291 Jy/beam ! Clean residual mean=-0.000017 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.420226 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 392 components and 0.420226 Jy ![Exited script file: muppet] wmap "J1215-1731_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.52 x 14.55 at 12.35 degrees (North through East) ! Clean map min=-0.009329 max=0.3713 Jy/beam ! Writing clean map to FITS file: J1215-1731_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.3713 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000731407 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.590957 0.590957 1.18191 2.36383 4.72766 9.45532 18.9106 37.8213 75.6425 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.371 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.52 x 14.55 at 12.35 degrees (North through East) ! Clean map min=-0.009329 max=0.3713 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1215-1731_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:35:17 2019