! Started logfile: J1215-1731_S_2017_02_19_pus_uvs.log on Sat May 4 18:50:58 2019 obs J1215-1731_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1215-1731_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.541667 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1215-1731_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.339075Jy sigma=0.002384 ! Fit after self-cal, rms=0.331661Jy sigma=0.002334 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=12.89 mas, bpa=23.18 degrees ! Estimated noise=4594.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.570851 Jy ! Component: 100 - total flux cleaned = 0.75651 Jy ! Total flux subtracted in 100 components = 0.75651 Jy ! Clean residual min=-0.062327 max=0.082478 Jy/beam ! Clean residual mean=-0.000121 rms=0.018354 Jy/beam ! Combined flux in latest and established models = 0.75651 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.75651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237645Jy sigma=0.001508 ! Fit after self-cal, rms=0.237245Jy sigma=0.001505 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=13.84 mas, bpa=22.62 degrees ! Estimated noise=3984.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10842 Jy ! Component: 100 - total flux cleaned = 0.160737 Jy ! Component: 150 - total flux cleaned = 0.193608 Jy ! Component: 200 - total flux cleaned = 0.216843 Jy ! Total flux subtracted in 200 components = 0.216843 Jy ! Clean residual min=-0.040078 max=0.068336 Jy/beam ! Clean residual mean=-0.000018 rms=0.012598 Jy/beam ! Combined flux in latest and established models = 0.973354 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 56 components and 0.973354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178011Jy sigma=0.001126 ! Fit after self-cal, rms=0.177806Jy sigma=0.001125 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.92 HN 1.04 KP 1.05 ! LA 1.02 MK 1.00* NL 0.88 OV 1.06 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.03 KP 1.00 ! LA 1.01 MK 1.00* NL 1.04 OV 1.08 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 1.05 KP 0.88 ! LA 0.76 MK 1.00* NL 1.13 OV 0.97 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 0.97 KP 1.00* ! LA 0.75 MK 1.00* NL 1.00* OV 1.26 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.177806Jy sigma=0.001125 ! Fit after self-cal, rms=0.123868Jy sigma=0.000869 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=14.01 mas, bpa=22.78 degrees ! Estimated noise=3925.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563137 Jy ! Component: 100 - total flux cleaned = 0.0681412 Jy ! Component: 150 - total flux cleaned = 0.0737576 Jy ! Component: 200 - total flux cleaned = 0.0796581 Jy ! Total flux subtracted in 200 components = 0.0796581 Jy ! Clean residual min=-0.012417 max=0.013933 Jy/beam ! Clean residual mean=0.000003 rms=0.003784 Jy/beam ! Combined flux in latest and established models = 1.05301 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 1.05301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097728Jy sigma=0.000680 ! Fit after self-cal, rms=0.097188Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097188Jy sigma=0.000676 ! Fit after self-cal, rms=0.095365Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=14.03 mas, bpa=22.81 degrees ! Estimated noise=3884.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649194 Jy ! Component: 100 - total flux cleaned = 0.00784505 Jy ! Component: 150 - total flux cleaned = 0.00868028 Jy ! Component: 200 - total flux cleaned = 0.00918099 Jy ! Total flux subtracted in 200 components = 0.00918099 Jy ! Clean residual min=-0.010037 max=0.010554 Jy/beam ! Clean residual mean=0.000001 rms=0.002793 Jy/beam ! Combined flux in latest and established models = 1.06219 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 1.06219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094052Jy sigma=0.000660 ! Fit after self-cal, rms=0.093989Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000871406 Jy ! Component: 100 - total flux cleaned = 0.000473453 Jy ! Component: 150 - total flux cleaned = 0.00166461 Jy ! Component: 200 - total flux cleaned = 0.00274367 Jy ! Total flux subtracted in 200 components = 0.00274367 Jy ! Clean residual min=-0.009738 max=0.010220 Jy/beam ! Clean residual mean=-0.000000 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 1.06494 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 1.06494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093637Jy sigma=0.000657 ! Fit after self-cal, rms=0.093619Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093619Jy sigma=0.000657 ! Fit after self-cal, rms=0.093432Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=14.05 mas, bpa=22.83 degrees ! Estimated noise=3877.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183089 Jy ! Component: 100 - total flux cleaned = -0.00172273 Jy ! Component: 150 - total flux cleaned = -0.00162364 Jy ! Component: 200 - total flux cleaned = -0.00162303 Jy ! Total flux subtracted in 200 components = -0.00162303 Jy ! Clean residual min=-0.009367 max=0.009706 Jy/beam ! Clean residual mean=-0.000002 rms=0.002403 Jy/beam ! Combined flux in latest and established models = 1.06331 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 1.06331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093214Jy sigma=0.000654 ! Fit after self-cal, rms=0.093205Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000688068 Jy ! Component: 100 - total flux cleaned = -0.000446837 Jy ! Component: 150 - total flux cleaned = -0.000137397 Jy ! Component: 200 - total flux cleaned = 0.000159457 Jy ! Total flux subtracted in 200 components = 0.000159457 Jy ! Clean residual min=-0.009226 max=0.009405 Jy/beam ! Clean residual mean=-0.000002 rms=0.002329 Jy/beam ! Combined flux in latest and established models = 1.06347 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 1.06347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093094Jy sigma=0.000653 ! Fit after self-cal, rms=0.093089Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093089Jy sigma=0.000653 ! Fit after self-cal, rms=0.093031Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.039 mas, bmaj=17.08 mas, bpa=13.92 degrees ! Estimated noise=4522.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260683 Jy ! Component: 100 - total flux cleaned = 0.00335353 Jy ! Component: 150 - total flux cleaned = 0.00393419 Jy ! Component: 200 - total flux cleaned = 0.00454668 Jy ! Total flux subtracted in 200 components = 0.00454668 Jy ! Clean residual min=-0.008112 max=0.009966 Jy/beam ! Clean residual mean=-0.000007 rms=0.002770 Jy/beam ! Combined flux in latest and established models = 1.06802 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 161 components and 1.06802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092957Jy sigma=0.000652 ! Fit after self-cal, rms=0.092952Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602658 Jy ! Component: 100 - total flux cleaned = 0.00129959 Jy ! Component: 150 - total flux cleaned = 0.00187864 Jy ! Component: 200 - total flux cleaned = 0.00241958 Jy ! Total flux subtracted in 200 components = 0.00241958 Jy ! Clean residual min=-0.007705 max=0.009470 Jy/beam ! Clean residual mean=-0.000007 rms=0.002677 Jy/beam ! Combined flux in latest and established models = 1.07044 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 172 components and 1.07044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092912Jy sigma=0.000652 ! Fit after self-cal, rms=0.092906Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=14.06 mas, bpa=22.84 degrees ! Estimated noise=3874.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 14.06 at 22.84 degrees (North through East) ! Clean map min=-0.012734 max=0.76468 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092906Jy sigma=0.000652 ! Fit after self-cal, rms=0.085468Jy sigma=0.000597 ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=14.07 mas, bpa=22.84 degrees ! Estimated noise=3872.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195594 Jy ! Component: 100 - total flux cleaned = -0.00312229 Jy ! Component: 150 - total flux cleaned = -0.00406862 Jy ! Component: 200 - total flux cleaned = -0.00461952 Jy ! Total flux subtracted in 200 components = -0.00461952 Jy ! Clean residual min=-0.008280 max=0.008659 Jy/beam ! Clean residual mean=-0.000003 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 1.06582 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 191 components and 1.06582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085330Jy sigma=0.000596 ! Fit after self-cal, rms=0.085318Jy sigma=0.000596 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110036 Jy ! Component: 100 - total flux cleaned = -0.00158156 Jy ! Component: 150 - total flux cleaned = -0.00192239 Jy ! Component: 200 - total flux cleaned = -0.00219049 Jy ! Total flux subtracted in 200 components = -0.00219049 Jy ! Clean residual min=-0.008187 max=0.008703 Jy/beam ! Clean residual mean=-0.000003 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 1.06363 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 208 components and 1.06363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085257Jy sigma=0.000596 ! Fit after self-cal, rms=0.085253Jy sigma=0.000596 ! Inverting map ! Added new window around map position (-121.5, 46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175892 Jy ! Component: 100 - total flux cleaned = 0.00192406 Jy ! Component: 150 - total flux cleaned = 0.00284014 Jy ! Component: 200 - total flux cleaned = 0.00345095 Jy ! Total flux subtracted in 200 components = 0.00345095 Jy ! Clean residual min=-0.007043 max=0.006115 Jy/beam ! Clean residual mean=-0.000002 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 1.06708 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 233 components and 1.06708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084243Jy sigma=0.000588 ! Fit after self-cal, rms=0.084204Jy sigma=0.000588 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084204Jy sigma=0.000588 ! Fit after self-cal, rms=0.084081Jy sigma=0.000588 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=13.21 mas, bpa=23.47 degrees ! Estimated noise=4494.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.558343 Jy ! Component: 100 - total flux cleaned = 0.738366 Jy ! Component: 150 - total flux cleaned = 0.824351 Jy ! Component: 200 - total flux cleaned = 0.880172 Jy ! Total flux subtracted in 200 components = 0.880172 Jy ! Clean residual min=-0.027953 max=0.033397 Jy/beam ! Clean residual mean=-0.000047 rms=0.008825 Jy/beam ! Combined flux in latest and established models = 0.880173 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.880173 Jy ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=14.08 mas, bpa=22.87 degrees ! Estimated noise=3867.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487156 Jy ! Component: 100 - total flux cleaned = 0.0822757 Jy ! Component: 150 - total flux cleaned = 0.101641 Jy ! Component: 200 - total flux cleaned = 0.112023 Jy ! Total flux subtracted in 200 components = 0.112023 Jy ! Clean residual min=-0.015996 max=0.016465 Jy/beam ! Clean residual mean=-0.000005 rms=0.004724 Jy/beam ! Combined flux in latest and established models = 0.992196 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 55 components and 0.992196 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.045 mas, bmaj=17.1 mas, bpa=13.95 degrees ! Estimated noise=4510.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145362 Jy ! Component: 100 - total flux cleaned = 0.0259676 Jy ! Component: 150 - total flux cleaned = 0.0335041 Jy ! Component: 200 - total flux cleaned = 0.040448 Jy ! Total flux subtracted in 200 components = 0.040448 Jy ! Clean residual min=-0.012312 max=0.009985 Jy/beam ! Clean residual mean=-0.000009 rms=0.003865 Jy/beam ! Combined flux in latest and established models = 1.03264 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507086 Jy ! Component: 100 - total flux cleaned = 0.0093836 Jy ! Component: 150 - total flux cleaned = 0.0130765 Jy ! Component: 200 - total flux cleaned = 0.0160946 Jy ! Total flux subtracted in 200 components = 0.0160946 Jy ! Clean residual min=-0.008989 max=0.008834 Jy/beam ! Clean residual mean=-0.000010 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 1.04874 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 141 components and 1.04874 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.685 mas, bmaj=14.08 mas, bpa=22.87 degrees ! Estimated noise=3867.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041384 Jy ! Component: 100 - total flux cleaned = 0.00676587 Jy ! Component: 150 - total flux cleaned = 0.00854089 Jy ! Component: 200 - total flux cleaned = 0.0107633 Jy ! Total flux subtracted in 200 components = 0.0107633 Jy ! Clean residual min=-0.007995 max=0.007873 Jy/beam ! Clean residual mean=0.000001 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 1.0595 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 169 components and 1.0595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085256Jy sigma=0.000596 ! Fit after self-cal, rms=0.085113Jy sigma=0.000595 wmodel J1215-1731_S_2017_02_19_pus_map.mod ! Writing 169 model components to file: J1215-1731_S_2017_02_19_pus_map.mod wobs J1215-1731_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1215-1731_S_2017_02_19_pus_uvs.fits wwins J1215-1731_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J1215-1731_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736609 Jy ! Component: 100 - total flux cleaned = 0.000742977 Jy ! Component: 150 - total flux cleaned = 0.000520058 Jy ! Component: 200 - total flux cleaned = 1.70958e-06 Jy ! Component: 250 - total flux cleaned = -0.000584618 Jy ! Component: 300 - total flux cleaned = -0.000955105 Jy ! Component: 350 - total flux cleaned = -0.00122377 Jy ! Component: 400 - total flux cleaned = -0.00148219 Jy ! Component: 450 - total flux cleaned = -0.00131636 Jy ! Component: 500 - total flux cleaned = -0.00148059 Jy ! Component: 550 - total flux cleaned = -0.00178824 Jy ! Component: 600 - total flux cleaned = -0.00148588 Jy ! Component: 650 - total flux cleaned = -0.00126756 Jy ! Component: 700 - total flux cleaned = -0.00126435 Jy ! Component: 750 - total flux cleaned = -0.000990177 Jy ! Component: 800 - total flux cleaned = -0.00119169 Jy ! Component: 850 - total flux cleaned = -0.00138745 Jy ! Component: 900 - total flux cleaned = -0.00132246 Jy ! Component: 950 - total flux cleaned = -0.00119623 Jy ! Component: 1000 - total flux cleaned = -0.00107413 Jy ! Component: 1050 - total flux cleaned = -0.000891826 Jy ! Component: 1100 - total flux cleaned = -0.000533579 Jy ! Component: 1150 - total flux cleaned = -0.000240499 Jy ! Component: 1200 - total flux cleaned = -6.70719e-05 Jy ! Component: 1250 - total flux cleaned = 0.000160437 Jy ! Component: 1300 - total flux cleaned = 0.000383955 Jy ! Component: 1350 - total flux cleaned = 0.000548007 Jy ! Component: 1400 - total flux cleaned = 0.000547993 Jy ! Component: 1450 - total flux cleaned = 0.000548564 Jy ! Component: 1500 - total flux cleaned = 0.000442407 Jy ! Component: 1550 - total flux cleaned = 0.000442536 Jy ! Component: 1600 - total flux cleaned = 0.000235348 Jy ! Component: 1650 - total flux cleaned = 3.04722e-05 Jy ! Component: 1700 - total flux cleaned = -0.000171891 Jy ! Component: 1750 - total flux cleaned = -0.000321863 Jy ! Component: 1800 - total flux cleaned = -0.000470038 Jy ! Component: 1850 - total flux cleaned = -0.000518545 Jy ! Component: 1900 - total flux cleaned = -0.000761351 Jy ! Component: 1950 - total flux cleaned = -0.00100226 Jy ! Component: 2000 - total flux cleaned = -0.0011457 Jy ! Component: 2050 - total flux cleaned = -0.00138229 Jy ! Component: 2100 - total flux cleaned = -0.00147623 Jy ! Component: 2150 - total flux cleaned = -0.00152254 Jy ! Component: 2200 - total flux cleaned = -0.00161519 Jy ! Component: 2250 - total flux cleaned = -0.00175271 Jy ! Component: 2300 - total flux cleaned = -0.00193444 Jy ! Component: 2350 - total flux cleaned = -0.0018439 Jy ! Component: 2400 - total flux cleaned = -0.00175378 Jy ! Component: 2450 - total flux cleaned = -0.00170899 Jy ! Component: 2500 - total flux cleaned = -0.00166427 Jy ! Component: 2550 - total flux cleaned = -0.00157437 Jy ! Component: 2600 - total flux cleaned = -0.00161945 Jy ! Component: 2650 - total flux cleaned = -0.00148464 Jy ! Component: 2700 - total flux cleaned = -0.00152979 Jy ! Component: 2750 - total flux cleaned = -0.0014397 Jy ! Component: 2800 - total flux cleaned = -0.00139476 Jy ! Component: 2850 - total flux cleaned = -0.00148526 Jy ! Component: 2900 - total flux cleaned = -0.00143965 Jy ! Component: 2950 - total flux cleaned = -0.00139422 Jy ! Component: 3000 - total flux cleaned = -0.00143938 Jy ! Component: 3050 - total flux cleaned = -0.00153077 Jy ! Component: 3100 - total flux cleaned = -0.00153066 Jy ! Component: 3150 - total flux cleaned = -0.00162354 Jy ! Component: 3200 - total flux cleaned = -0.00162394 Jy ! Component: 3250 - total flux cleaned = -0.00171769 Jy ! Component: 3300 - total flux cleaned = -0.00171781 Jy ! Component: 3350 - total flux cleaned = -0.00171786 Jy ! Component: 3400 - total flux cleaned = -0.00171817 Jy ! Component: 3450 - total flux cleaned = -0.00171845 Jy ! Component: 3500 - total flux cleaned = -0.00176756 Jy ! Component: 3550 - total flux cleaned = -0.00171823 Jy ! Component: 3600 - total flux cleaned = -0.001718 Jy ! Component: 3650 - total flux cleaned = -0.00166773 Jy ! Component: 3700 - total flux cleaned = -0.00171902 Jy ! Component: 3750 - total flux cleaned = -0.00166801 Jy ! Component: 3800 - total flux cleaned = -0.00156469 Jy ! Component: 3850 - total flux cleaned = -0.00151135 Jy ! Component: 3900 - total flux cleaned = -0.00145837 Jy ! Component: 3950 - total flux cleaned = -0.00129722 Jy ! Component: 4000 - total flux cleaned = -0.00118745 Jy ! Component: 4050 - total flux cleaned = -0.00113218 Jy ! Total flux subtracted in 4096 components = -0.00102082 Jy ! Clean residual min=-0.003211 max=0.003628 Jy/beam ! Clean residual mean=-0.000001 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 1.05848 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 389 components and 1.05848 Jy ![Exited script file: muppet] wmap "J1215-1731_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 14.08 at 22.87 degrees (North through East) ! Clean map min=-0.011389 max=0.76277 Jy/beam ! Writing clean map to FITS file: J1215-1731_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.762774 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000950369 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.373781 0.373781 0.747562 1.49512 2.99025 5.9805 11.961 23.922 47.844 95.688 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.762 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.685 x 14.08 at 22.87 degrees (North through East) ! Clean map min=-0.011389 max=0.76277 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1215-1731_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:51:03 2019