! Started logfile: J1215-1731_S_2017_01_21_pus_uvs.log on Sun May 5 15:54:25 2019 obs J1215-1731_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1215-1731_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J1215-1731 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1215-1731_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.366497Jy sigma=0.002534 ! Fit after self-cal, rms=0.361540Jy sigma=0.002500 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=6.356 mas, bpa=-8.637 degrees ! Estimated noise=4666.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.520518 Jy ! Component: 100 - total flux cleaned = 0.690899 Jy ! Total flux subtracted in 100 components = 0.690899 Jy ! Clean residual min=-0.044061 max=0.077927 Jy/beam ! Clean residual mean=0.000050 rms=0.014949 Jy/beam ! Combined flux in latest and established models = 0.690899 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.690899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194931Jy sigma=0.001386 ! Fit after self-cal, rms=0.194544Jy sigma=0.001384 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.061 mas, bpa=-6.634 degrees ! Estimated noise=4006.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111721 Jy ! Component: 100 - total flux cleaned = 0.163676 Jy ! Component: 150 - total flux cleaned = 0.189445 Jy ! Component: 200 - total flux cleaned = 0.203035 Jy ! Total flux subtracted in 200 components = 0.203035 Jy ! Clean residual min=-0.030160 max=0.052235 Jy/beam ! Clean residual mean=0.000089 rms=0.011858 Jy/beam ! Combined flux in latest and established models = 0.893934 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.893934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130833Jy sigma=0.000883 ! Fit after self-cal, rms=0.130685Jy sigma=0.000882 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.98 LA 0.97 ! MK 0.97 NL 1.06 OV 1.04 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.04 LA 0.93 ! MK 1.01 NL 1.07 OV 1.09 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.02 LA 0.94 ! MK 1.03 NL 1.08 OV 0.96 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.01 LA 0.93 ! MK 0.99 NL 1.00* OV 1.03 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.130685Jy sigma=0.000882 ! Fit after self-cal, rms=0.127552Jy sigma=0.000804 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=7.07 mas, bpa=-6.44 degrees ! Estimated noise=3988.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (47, -63). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392889 Jy ! Component: 100 - total flux cleaned = 0.0575557 Jy ! Component: 150 - total flux cleaned = 0.0700459 Jy ! Component: 200 - total flux cleaned = 0.0778186 Jy ! Total flux subtracted in 200 components = 0.0778186 Jy ! Clean residual min=-0.016949 max=0.024735 Jy/beam ! Clean residual mean=0.000017 rms=0.005455 Jy/beam ! Combined flux in latest and established models = 0.971753 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 51 components and 0.971753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113766Jy sigma=0.000710 ! Fit after self-cal, rms=0.113391Jy sigma=0.000705 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113391Jy sigma=0.000705 ! Fit after self-cal, rms=0.110001Jy sigma=0.000697 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=7.045 mas, bpa=-6.121 degrees ! Estimated noise=3949.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128706 Jy ! Component: 100 - total flux cleaned = 0.017011 Jy ! Component: 150 - total flux cleaned = 0.0193987 Jy ! Component: 200 - total flux cleaned = 0.0217697 Jy ! Total flux subtracted in 200 components = 0.0217697 Jy ! Clean residual min=-0.012333 max=0.019394 Jy/beam ! Clean residual mean=0.000018 rms=0.004106 Jy/beam ! Combined flux in latest and established models = 0.993523 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 72 components and 0.993523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107831Jy sigma=0.000684 ! Fit after self-cal, rms=0.107750Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90, 124). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141553 Jy ! Component: 100 - total flux cleaned = 0.0174443 Jy ! Component: 150 - total flux cleaned = 0.0186277 Jy ! Component: 200 - total flux cleaned = 0.0194259 Jy ! Total flux subtracted in 200 components = 0.0194259 Jy ! Clean residual min=-0.011045 max=0.013188 Jy/beam ! Clean residual mean=-0.000001 rms=0.003144 Jy/beam ! Combined flux in latest and established models = 1.01295 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 1.01295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105162Jy sigma=0.000666 ! Fit after self-cal, rms=0.105080Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105080Jy sigma=0.000665 ! Fit after self-cal, rms=0.104498Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=7.039 mas, bpa=-6.022 degrees ! Estimated noise=3948.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525732 Jy ! Component: 100 - total flux cleaned = 0.00671549 Jy ! Component: 150 - total flux cleaned = 0.00703855 Jy ! Component: 200 - total flux cleaned = 0.00689057 Jy ! Total flux subtracted in 200 components = 0.00689057 Jy ! Clean residual min=-0.010865 max=0.012159 Jy/beam ! Clean residual mean=0.000012 rms=0.002837 Jy/beam ! Combined flux in latest and established models = 1.01984 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 1.01984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103883Jy sigma=0.000659 ! Fit after self-cal, rms=0.103891Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33, 113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113128 Jy ! Component: 100 - total flux cleaned = 0.0154458 Jy ! Component: 150 - total flux cleaned = 0.0176223 Jy ! Component: 200 - total flux cleaned = 0.0198448 Jy ! Total flux subtracted in 200 components = 0.0198448 Jy ! Clean residual min=-0.009377 max=0.008870 Jy/beam ! Clean residual mean=0.000014 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 1.03968 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 139 components and 1.03968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102429Jy sigma=0.000650 ! Fit after self-cal, rms=0.102382Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102382Jy sigma=0.000649 ! Fit after self-cal, rms=0.102384Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.96 mas, bmaj=14.58 mas, bpa=-2.239 degrees ! Estimated noise=5429.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477155 Jy ! Component: 100 - total flux cleaned = 0.00682922 Jy ! Component: 150 - total flux cleaned = 0.00768165 Jy ! Component: 200 - total flux cleaned = 0.00851377 Jy ! Total flux subtracted in 200 components = 0.00851377 Jy ! Clean residual min=-0.006744 max=0.006589 Jy/beam ! Clean residual mean=0.000016 rms=0.002044 Jy/beam ! Combined flux in latest and established models = 1.0482 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 153 components and 1.0482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102126Jy sigma=0.000648 ! Fit after self-cal, rms=0.102129Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116424 Jy ! Component: 100 - total flux cleaned = 0.00137338 Jy ! Component: 150 - total flux cleaned = 0.00175071 Jy ! Component: 200 - total flux cleaned = 0.00226627 Jy ! Total flux subtracted in 200 components = 0.00226627 Jy ! Clean residual min=-0.006474 max=0.005936 Jy/beam ! Clean residual mean=0.000011 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 1.05046 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 161 components and 1.05046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102027Jy sigma=0.000647 ! Fit after self-cal, rms=0.102024Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.816 mas, bmaj=7.043 mas, bpa=-5.991 degrees ! Estimated noise=3950.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.816 x 7.043 at -5.991 degrees (North through East) ! Clean map min=-0.010402 max=0.70312 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102024Jy sigma=0.000647 ! Fit after self-cal, rms=0.095196Jy sigma=0.000585 ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.042 mas, bpa=-5.997 degrees ! Estimated noise=3952.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157422 Jy ! Component: 100 - total flux cleaned = 0.0022651 Jy ! Component: 150 - total flux cleaned = 0.00309345 Jy ! Component: 200 - total flux cleaned = 0.00395176 Jy ! Total flux subtracted in 200 components = 0.00395176 Jy ! Clean residual min=-0.009165 max=0.007335 Jy/beam ! Clean residual mean=0.000007 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 1.05442 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 172 components and 1.05442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094870Jy sigma=0.000582 ! Fit after self-cal, rms=0.094862Jy sigma=0.000582 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120038 Jy ! Component: 100 - total flux cleaned = 0.00158584 Jy ! Component: 150 - total flux cleaned = 0.00194902 Jy ! Component: 200 - total flux cleaned = 0.00237572 Jy ! Total flux subtracted in 200 components = 0.00237572 Jy ! Clean residual min=-0.008823 max=0.006753 Jy/beam ! Clean residual mean=0.000006 rms=0.001659 Jy/beam ! Combined flux in latest and established models = 1.05679 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 185 components and 1.05679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094691Jy sigma=0.000581 ! Fit after self-cal, rms=0.094691Jy sigma=0.000581 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094691Jy sigma=0.000581 ! Fit after self-cal, rms=0.094760Jy sigma=0.000581 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=6.34 mas, bpa=-8.054 degrees ! Estimated noise=4653.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.519356 Jy ! Component: 100 - total flux cleaned = 0.692544 Jy ! Component: 150 - total flux cleaned = 0.780102 Jy ! Component: 200 - total flux cleaned = 0.829732 Jy ! Total flux subtracted in 200 components = 0.829732 Jy ! Clean residual min=-0.023534 max=0.030323 Jy/beam ! Clean residual mean=0.000040 rms=0.007987 Jy/beam ! Combined flux in latest and established models = 0.829732 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.829732 Jy ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=7.044 mas, bpa=-5.987 degrees ! Estimated noise=3955.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449426 Jy ! Component: 100 - total flux cleaned = 0.0774028 Jy ! Component: 150 - total flux cleaned = 0.102276 Jy ! Component: 200 - total flux cleaned = 0.122174 Jy ! Total flux subtracted in 200 components = 0.122174 Jy ! Clean residual min=-0.016453 max=0.018354 Jy/beam ! Clean residual mean=0.000050 rms=0.005305 Jy/beam ! Combined flux in latest and established models = 0.951905 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 46 components and 0.951906 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.959 mas, bmaj=14.62 mas, bpa=-2.267 degrees ! Estimated noise=5436.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294855 Jy ! Component: 100 - total flux cleaned = 0.0483637 Jy ! Component: 150 - total flux cleaned = 0.0620601 Jy ! Component: 200 - total flux cleaned = 0.0723045 Jy ! Total flux subtracted in 200 components = 0.0723045 Jy ! Clean residual min=-0.012440 max=0.012401 Jy/beam ! Clean residual mean=0.000045 rms=0.003705 Jy/beam ! Combined flux in latest and established models = 1.02421 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793718 Jy ! Component: 100 - total flux cleaned = 0.0134917 Jy ! Component: 150 - total flux cleaned = 0.0167926 Jy ! Component: 200 - total flux cleaned = 0.0194306 Jy ! Total flux subtracted in 200 components = 0.0194306 Jy ! Clean residual min=-0.008495 max=0.008332 Jy/beam ! Clean residual mean=0.000027 rms=0.002458 Jy/beam ! Combined flux in latest and established models = 1.04364 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 118 components and 1.04364 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=7.044 mas, bpa=-5.987 degrees ! Estimated noise=3955.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344137 Jy ! Component: 100 - total flux cleaned = 0.00371771 Jy ! Component: 150 - total flux cleaned = 0.00493498 Jy ! Component: 200 - total flux cleaned = 0.00672728 Jy ! Total flux subtracted in 200 components = 0.00672728 Jy ! Clean residual min=-0.009334 max=0.008803 Jy/beam ! Clean residual mean=0.000006 rms=0.002214 Jy/beam ! Combined flux in latest and established models = 1.05037 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 141 components and 1.05037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096415Jy sigma=0.000592 ! Fit after self-cal, rms=0.096386Jy sigma=0.000591 wmodel J1215-1731_S_2017_01_21_pus_map.mod ! Writing 141 model components to file: J1215-1731_S_2017_01_21_pus_map.mod wobs J1215-1731_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1215-1731_S_2017_01_21_pus_uvs.fits wwins J1215-1731_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1215-1731_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249214 Jy ! Component: 100 - total flux cleaned = -0.00393172 Jy ! Component: 150 - total flux cleaned = -0.00555139 Jy ! Component: 200 - total flux cleaned = -0.00718971 Jy ! Component: 250 - total flux cleaned = -0.00860176 Jy ! Component: 300 - total flux cleaned = -0.00981892 Jy ! Component: 350 - total flux cleaned = -0.0109607 Jy ! Component: 400 - total flux cleaned = -0.0121499 Jy ! Component: 450 - total flux cleaned = -0.0131873 Jy ! Component: 500 - total flux cleaned = -0.0141776 Jy ! Component: 550 - total flux cleaned = -0.0150416 Jy ! Component: 600 - total flux cleaned = -0.0157054 Jy ! Component: 650 - total flux cleaned = -0.0162629 Jy ! Component: 700 - total flux cleaned = -0.0168757 Jy ! Component: 750 - total flux cleaned = -0.0172451 Jy ! Component: 800 - total flux cleaned = -0.0176764 Jy ! Component: 850 - total flux cleaned = -0.018302 Jy ! Component: 900 - total flux cleaned = -0.0187062 Jy ! Component: 950 - total flux cleaned = -0.0189023 Jy ! Component: 1000 - total flux cleaned = -0.018967 Jy ! Component: 1050 - total flux cleaned = -0.0191558 Jy ! Component: 1100 - total flux cleaned = -0.0192169 Jy ! Component: 1150 - total flux cleaned = -0.0194559 Jy ! Component: 1200 - total flux cleaned = -0.0196325 Jy ! Component: 1250 - total flux cleaned = -0.0199753 Jy ! Component: 1300 - total flux cleaned = -0.0200316 Jy ! Component: 1350 - total flux cleaned = -0.0201427 Jy ! Component: 1400 - total flux cleaned = -0.0201438 Jy ! Component: 1450 - total flux cleaned = -0.0202502 Jy ! Component: 1500 - total flux cleaned = -0.0202497 Jy ! Component: 1550 - total flux cleaned = -0.0201455 Jy ! Component: 1600 - total flux cleaned = -0.0201965 Jy ! Component: 1650 - total flux cleaned = -0.0201962 Jy ! Component: 1700 - total flux cleaned = -0.0201466 Jy ! Component: 1750 - total flux cleaned = -0.0203426 Jy ! Component: 1800 - total flux cleaned = -0.0202931 Jy ! Component: 1850 - total flux cleaned = -0.0204356 Jy ! Component: 1900 - total flux cleaned = -0.0204828 Jy ! Component: 1950 - total flux cleaned = -0.0208086 Jy ! Component: 2000 - total flux cleaned = -0.0207625 Jy ! Component: 2050 - total flux cleaned = -0.020945 Jy ! Component: 2100 - total flux cleaned = -0.0210351 Jy ! Component: 2150 - total flux cleaned = -0.0211237 Jy ! Component: 2200 - total flux cleaned = -0.0212119 Jy ! Component: 2250 - total flux cleaned = -0.0212556 Jy ! Component: 2300 - total flux cleaned = -0.0212556 Jy ! Component: 2350 - total flux cleaned = -0.0212127 Jy ! Component: 2400 - total flux cleaned = -0.0211276 Jy ! Component: 2450 - total flux cleaned = -0.0210432 Jy ! Component: 2500 - total flux cleaned = -0.0209594 Jy ! Component: 2550 - total flux cleaned = -0.0208348 Jy ! Component: 2600 - total flux cleaned = -0.0207937 Jy ! Component: 2650 - total flux cleaned = -0.0206705 Jy ! Component: 2700 - total flux cleaned = -0.0205487 Jy ! Component: 2750 - total flux cleaned = -0.0205487 Jy ! Component: 2800 - total flux cleaned = -0.0204681 Jy ! Component: 2850 - total flux cleaned = -0.0203879 Jy ! Component: 2900 - total flux cleaned = -0.0203877 Jy ! Component: 2950 - total flux cleaned = -0.0203878 Jy ! Component: 3000 - total flux cleaned = -0.0202688 Jy ! Component: 3050 - total flux cleaned = -0.02019 Jy ! Component: 3100 - total flux cleaned = -0.02019 Jy ! Component: 3150 - total flux cleaned = -0.020151 Jy ! Component: 3200 - total flux cleaned = -0.0201509 Jy ! Component: 3250 - total flux cleaned = -0.020151 Jy ! Component: 3300 - total flux cleaned = -0.0201509 Jy ! Component: 3350 - total flux cleaned = -0.0201119 Jy ! Component: 3400 - total flux cleaned = -0.0200333 Jy ! Component: 3450 - total flux cleaned = -0.0199943 Jy ! Component: 3500 - total flux cleaned = -0.0199551 Jy ! Component: 3550 - total flux cleaned = -0.0199159 Jy ! Component: 3600 - total flux cleaned = -0.019837 Jy ! Component: 3650 - total flux cleaned = -0.0199158 Jy ! Component: 3700 - total flux cleaned = -0.0197976 Jy ! Component: 3750 - total flux cleaned = -0.0198369 Jy ! Component: 3800 - total flux cleaned = -0.0197576 Jy ! Component: 3850 - total flux cleaned = -0.0197178 Jy ! Component: 3900 - total flux cleaned = -0.0197181 Jy ! Component: 3950 - total flux cleaned = -0.0197181 Jy ! Component: 4000 - total flux cleaned = -0.0196378 Jy ! Component: 4050 - total flux cleaned = -0.0196379 Jy ! Total flux subtracted in 4096 components = -0.0195973 Jy ! Clean residual min=-0.002348 max=0.002443 Jy/beam ! Clean residual mean=0.000010 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 1.03077 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 361 components and 1.03077 Jy ![Exited script file: muppet] wmap "J1215-1731_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.815 x 7.044 at -5.987 degrees (North through East) ! Clean map min=-0.0060531 max=0.70204 Jy/beam ! Writing clean map to FITS file: J1215-1731_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.702041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000635564 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.271593 0.271593 0.543185 1.08637 2.17274 4.34548 8.69096 17.3819 34.7638 69.5277 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.702 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.815 x 7.044 at -5.987 degrees (North through East) ! Clean map min=-0.0060531 max=0.70204 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1215-1731_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:54:30 2019