! Started logfile: J1215+1730_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:05 2019 obs J1215+1730_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1215+1730_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.725076 visibilities/baseline/integration-bin. ! Found source: J1215+1730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15244 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1215+1730_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 362 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 777 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942170Jy sigma=0.008228 ! Fit after self-cal, rms=0.911977Jy sigma=0.007965 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=10.51 mas, bpa=-19.13 degrees ! Estimated noise=1107.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583617 Jy ! Component: 100 - total flux cleaned = 0.0875807 Jy ! Total flux subtracted in 100 components = 0.0875807 Jy ! Clean residual min=-0.015068 max=0.023407 Jy/beam ! Clean residual mean=-0.000004 rms=0.005607 Jy/beam ! Combined flux in latest and established models = 0.0875806 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.0875806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139580Jy sigma=0.001225 ! Fit after self-cal, rms=0.139145Jy sigma=0.001221 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=11.04 mas, bpa=-17.35 degrees ! Estimated noise=772.473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516864 Jy ! Component: 100 - total flux cleaned = 0.0876337 Jy ! Component: 150 - total flux cleaned = 0.113353 Jy ! Component: 200 - total flux cleaned = 0.131907 Jy ! Total flux subtracted in 200 components = 0.131907 Jy ! Clean residual min=-0.019438 max=0.031717 Jy/beam ! Clean residual mean=-0.000096 rms=0.007999 Jy/beam ! Combined flux in latest and established models = 0.219488 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 114 components and 0.219488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115219Jy sigma=0.000971 ! Fit after self-cal, rms=0.114101Jy sigma=0.000961 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.64 FD 0.86 HN 1.08 KP 1.70 ! LA 0.79 MK 1.04 NL 1.91 OV 1.00* ! PT 0.69 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.09 KP 1.62 ! LA 0.78 MK 1.19 NL 2.57 OV 1.00* ! PT 0.67 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.63 FD 0.93 HN 0.94 KP 1.42 ! LA 0.64 MK 1.27 NL 2.21 OV 1.00* ! PT 0.66 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 0.68 KP 1.00* ! LA 1.00* MK 1.14 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.114101Jy sigma=0.000961 ! Fit after self-cal, rms=0.153864Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=12.03 mas, bpa=-17.22 degrees ! Estimated noise=811.503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000737664 Jy ! Component: 100 - total flux cleaned = -0.000825165 Jy ! Component: 150 - total flux cleaned = -0.000899948 Jy ! Component: 200 - total flux cleaned = -0.000896743 Jy ! Total flux subtracted in 200 components = -0.000896743 Jy ! Clean residual min=-0.010672 max=0.014930 Jy/beam ! Clean residual mean=0.000056 rms=0.003768 Jy/beam ! Combined flux in latest and established models = 0.218591 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 131 components and 0.218591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153679Jy sigma=0.000781 ! Fit after self-cal, rms=0.157167Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157167Jy sigma=0.000772 ! Fit after self-cal, rms=0.178775Jy sigma=0.000752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=11.75 mas, bpa=-16.74 degrees ! Estimated noise=774.641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000533423 Jy ! Component: 100 - total flux cleaned = -0.000603157 Jy ! Component: 150 - total flux cleaned = -0.000602052 Jy ! Component: 200 - total flux cleaned = -0.000556171 Jy ! Total flux subtracted in 200 components = -0.000556171 Jy ! Clean residual min=-0.008285 max=0.011272 Jy/beam ! Clean residual mean=0.000052 rms=0.003320 Jy/beam ! Combined flux in latest and established models = 0.218035 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 142 components and 0.218035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178677Jy sigma=0.000751 ! Fit after self-cal, rms=0.179138Jy sigma=0.000749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103669 Jy ! Component: 100 - total flux cleaned = -4.7714e-05 Jy ! Component: 150 - total flux cleaned = -4.67541e-05 Jy ! Component: 200 - total flux cleaned = -8.62866e-06 Jy ! Total flux subtracted in 200 components = -8.62866e-06 Jy ! Clean residual min=-0.008612 max=0.011615 Jy/beam ! Clean residual mean=0.000050 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 0.218026 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 0.218026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179054Jy sigma=0.000749 ! Fit after self-cal, rms=0.179040Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179040Jy sigma=0.000749 ! Fit after self-cal, rms=0.186600Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=11.63 mas, bpa=-17.07 degrees ! Estimated noise=773.034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000735075 Jy ! Component: 100 - total flux cleaned = -0.000611595 Jy ! Component: 150 - total flux cleaned = -0.000564676 Jy ! Component: 200 - total flux cleaned = -0.000519757 Jy ! Total flux subtracted in 200 components = -0.000519757 Jy ! Clean residual min=-0.008593 max=0.011486 Jy/beam ! Clean residual mean=0.000050 rms=0.003313 Jy/beam ! Combined flux in latest and established models = 0.217506 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 162 components and 0.217506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186520Jy sigma=0.000748 ! Fit after self-cal, rms=0.186532Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109335 Jy ! Component: 100 - total flux cleaned = 0.000152409 Jy ! Component: 150 - total flux cleaned = 0.000189451 Jy ! Component: 200 - total flux cleaned = 0.00022363 Jy ! Total flux subtracted in 200 components = 0.00022363 Jy ! Clean residual min=-0.008633 max=0.011564 Jy/beam ! Clean residual mean=0.000049 rms=0.003307 Jy/beam ! Combined flux in latest and established models = 0.21773 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 168 components and 0.21773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186482Jy sigma=0.000747 ! Fit after self-cal, rms=0.186465Jy sigma=0.000747 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186465Jy sigma=0.000747 ! Fit after self-cal, rms=0.188548Jy sigma=0.000747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.939 mas, bmaj=12.74 mas, bpa=-22.92 degrees ! Estimated noise=859.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.15421e-05 Jy ! Component: 100 - total flux cleaned = -0.000334031 Jy ! Component: 150 - total flux cleaned = -0.000335665 Jy ! Component: 200 - total flux cleaned = -0.000266802 Jy ! Total flux subtracted in 200 components = -0.000266802 Jy ! Clean residual min=-0.013219 max=0.017187 Jy/beam ! Clean residual mean=0.000086 rms=0.005282 Jy/beam ! Combined flux in latest and established models = 0.217463 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 171 components and 0.217463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188479Jy sigma=0.000748 ! Fit after self-cal, rms=0.188320Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000173107 Jy ! Component: 100 - total flux cleaned = 5.78845e-05 Jy ! Component: 150 - total flux cleaned = 5.70973e-05 Jy ! Component: 200 - total flux cleaned = 0.000110391 Jy ! Total flux subtracted in 200 components = 0.000110391 Jy ! Clean residual min=-0.013154 max=0.016863 Jy/beam ! Clean residual mean=0.000086 rms=0.005228 Jy/beam ! Combined flux in latest and established models = 0.217574 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 173 components and 0.217574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188284Jy sigma=0.000748 ! Fit after self-cal, rms=0.188223Jy sigma=0.000748 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.016 mas, bmaj=11.55 mas, bpa=-17.41 degrees ! Estimated noise=778.501 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.016 x 11.55 at -17.41 degrees (North through East) ! Clean map min=-0.0085811 max=0.085885 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=11.12 mas, bpa=-18.9 degrees ! Estimated noise=1172.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0597078 Jy ! Component: 100 - total flux cleaned = 0.0957425 Jy ! Component: 150 - total flux cleaned = 0.122001 Jy ! Component: 200 - total flux cleaned = 0.14189 Jy ! Total flux subtracted in 200 components = 0.14189 Jy ! Clean residual min=-0.010236 max=0.013557 Jy/beam ! Clean residual mean=0.000039 rms=0.003659 Jy/beam ! Combined flux in latest and established models = 0.14189 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.14189 Jy ! Inverting map and beam ! Estimated beam: bmin=4.016 mas, bmaj=11.55 mas, bpa=-17.41 degrees ! Estimated noise=778.501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026728 Jy ! Component: 100 - total flux cleaned = 0.043826 Jy ! Component: 150 - total flux cleaned = 0.0550637 Jy ! Component: 200 - total flux cleaned = 0.0625232 Jy ! Total flux subtracted in 200 components = 0.0625232 Jy ! Clean residual min=-0.009973 max=0.012048 Jy/beam ! Clean residual mean=0.000048 rms=0.003661 Jy/beam ! Combined flux in latest and established models = 0.204413 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 99 components and 0.204413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.939 mas, bmaj=12.74 mas, bpa=-22.92 degrees ! Estimated noise=859.268 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00809527 Jy ! Component: 100 - total flux cleaned = 0.00966214 Jy ! Component: 150 - total flux cleaned = 0.0104344 Jy ! Component: 200 - total flux cleaned = 0.0110819 Jy ! Total flux subtracted in 200 components = 0.0110819 Jy ! Clean residual min=-0.013177 max=0.017016 Jy/beam ! Clean residual mean=0.000083 rms=0.005380 Jy/beam ! Combined flux in latest and established models = 0.215495 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538859 Jy ! Component: 100 - total flux cleaned = 0.000911661 Jy ! Component: 150 - total flux cleaned = 0.00123501 Jy ! Component: 200 - total flux cleaned = 0.00151275 Jy ! Total flux subtracted in 200 components = 0.00151275 Jy ! Clean residual min=-0.012937 max=0.016650 Jy/beam ! Clean residual mean=0.000085 rms=0.005292 Jy/beam ! Combined flux in latest and established models = 0.217008 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.217008 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.016 mas, bmaj=11.55 mas, bpa=-17.41 degrees ! Estimated noise=778.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105964 Jy ! Component: 100 - total flux cleaned = -0.000115571 Jy ! Component: 150 - total flux cleaned = -3.39857e-05 Jy ! Component: 200 - total flux cleaned = 0.000106192 Jy ! Total flux subtracted in 200 components = 0.000106192 Jy ! Clean residual min=-0.008841 max=0.011290 Jy/beam ! Clean residual mean=0.000050 rms=0.003339 Jy/beam ! Combined flux in latest and established models = 0.217114 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 120 components and 0.217114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188049Jy sigma=0.000749 ! Fit after self-cal, rms=0.188085Jy sigma=0.000748 wmodel J1215+1730_S_2017_10_09_pus_map.mod ! Writing 120 model components to file: J1215+1730_S_2017_10_09_pus_map.mod wobs J1215+1730_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1215+1730_S_2017_10_09_pus_uvs.fits wwins J1215+1730_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1215+1730_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00520699 Jy ! Component: 100 - total flux cleaned = 0.00999425 Jy ! Component: 150 - total flux cleaned = 0.0144924 Jy ! Component: 200 - total flux cleaned = 0.0187496 Jy ! Component: 250 - total flux cleaned = 0.0228022 Jy ! Component: 300 - total flux cleaned = 0.026521 Jy ! Component: 350 - total flux cleaned = 0.0299318 Jy ! Component: 400 - total flux cleaned = 0.0329176 Jy ! Component: 450 - total flux cleaned = 0.0355145 Jy ! Component: 500 - total flux cleaned = 0.0378816 Jy ! Component: 550 - total flux cleaned = 0.0404188 Jy ! Component: 600 - total flux cleaned = 0.0428722 Jy ! Component: 650 - total flux cleaned = 0.0452484 Jy ! Component: 700 - total flux cleaned = 0.0475556 Jy ! Component: 750 - total flux cleaned = 0.049575 Jy ! Component: 800 - total flux cleaned = 0.0513242 Jy ! Component: 850 - total flux cleaned = 0.0531389 Jy ! Component: 900 - total flux cleaned = 0.0544938 Jy ! Component: 950 - total flux cleaned = 0.0558206 Jy ! Component: 1000 - total flux cleaned = 0.057318 Jy ! Component: 1050 - total flux cleaned = 0.0583932 Jy ! Component: 1100 - total flux cleaned = 0.0592582 Jy ! Component: 1150 - total flux cleaned = 0.0602026 Jy ! Component: 1200 - total flux cleaned = 0.0611289 Jy ! Component: 1250 - total flux cleaned = 0.0620373 Jy ! Component: 1300 - total flux cleaned = 0.0628398 Jy ! Component: 1350 - total flux cleaned = 0.0637159 Jy ! Component: 1400 - total flux cleaned = 0.0643191 Jy ! Component: 1450 - total flux cleaned = 0.0651674 Jy ! Component: 1500 - total flux cleaned = 0.0658352 Jy ! Component: 1550 - total flux cleaned = 0.0664923 Jy ! Component: 1600 - total flux cleaned = 0.0671391 Jy ! Component: 1650 - total flux cleaned = 0.0677773 Jy ! Component: 1700 - total flux cleaned = 0.0681699 Jy ! Component: 1750 - total flux cleaned = 0.0687124 Jy ! Component: 1800 - total flux cleaned = 0.068941 Jy ! Component: 1850 - total flux cleaned = 0.069092 Jy ! Component: 1900 - total flux cleaned = 0.06939 Jy ! Component: 1950 - total flux cleaned = 0.0696843 Jy ! Component: 2000 - total flux cleaned = 0.0699022 Jy ! Component: 2050 - total flux cleaned = 0.0702614 Jy ! Component: 2100 - total flux cleaned = 0.0705446 Jy ! Component: 2150 - total flux cleaned = 0.0705438 Jy ! Component: 2200 - total flux cleaned = 0.0707518 Jy ! Component: 2250 - total flux cleaned = 0.0708891 Jy ! Component: 2300 - total flux cleaned = 0.0710921 Jy ! Component: 2350 - total flux cleaned = 0.0712937 Jy ! Component: 2400 - total flux cleaned = 0.0712944 Jy ! Component: 2450 - total flux cleaned = 0.071623 Jy ! Component: 2500 - total flux cleaned = 0.0716885 Jy ! Component: 2550 - total flux cleaned = 0.0718823 Jy ! Component: 2600 - total flux cleaned = 0.0722019 Jy ! Component: 2650 - total flux cleaned = 0.072266 Jy ! Component: 2700 - total flux cleaned = 0.07258 Jy ! Component: 2750 - total flux cleaned = 0.0729514 Jy ! Component: 2800 - total flux cleaned = 0.0730746 Jy ! Component: 2850 - total flux cleaned = 0.0732575 Jy ! Component: 2900 - total flux cleaned = 0.0735 Jy ! Component: 2950 - total flux cleaned = 0.0737392 Jy ! Component: 3000 - total flux cleaned = 0.0738575 Jy ! Component: 3050 - total flux cleaned = 0.0740339 Jy ! Component: 3100 - total flux cleaned = 0.0741505 Jy ! Component: 3150 - total flux cleaned = 0.0741499 Jy ! Component: 3200 - total flux cleaned = 0.0743218 Jy ! Component: 3250 - total flux cleaned = 0.0743217 Jy ! Component: 3300 - total flux cleaned = 0.0746056 Jy ! Component: 3350 - total flux cleaned = 0.0747189 Jy ! Component: 3400 - total flux cleaned = 0.0751104 Jy ! Component: 3450 - total flux cleaned = 0.0752774 Jy ! Component: 3500 - total flux cleaned = 0.0755537 Jy ! Component: 3550 - total flux cleaned = 0.0757184 Jy ! Component: 3600 - total flux cleaned = 0.0758825 Jy ! Component: 3650 - total flux cleaned = 0.0760998 Jy ! Component: 3700 - total flux cleaned = 0.0762618 Jy ! Component: 3750 - total flux cleaned = 0.0766375 Jy ! Component: 3800 - total flux cleaned = 0.0766905 Jy ! Component: 3850 - total flux cleaned = 0.0769561 Jy ! Component: 3900 - total flux cleaned = 0.07722 Jy ! Component: 3950 - total flux cleaned = 0.0773247 Jy ! Component: 4000 - total flux cleaned = 0.0775337 Jy ! Component: 4050 - total flux cleaned = 0.0776895 Jy ! Total flux subtracted in 4096 components = 0.0777932 Jy ! Clean residual min=-0.002936 max=0.003106 Jy/beam ! Clean residual mean=0.000003 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.294907 Jy keep ! Adding 443 model components to the UV plane model. ! The established model now contains 563 components and 0.294907 Jy ![Exited script file: muppet] wmap "J1215+1730_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.016 x 11.55 at -17.41 degrees (North through East) ! Clean map min=-0.0053571 max=0.089146 Jy/beam ! Writing clean map to FITS file: J1215+1730_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0891459 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010493 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.53117 3.53117 7.06233 14.1247 28.2493 56.4987 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0031 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.016 x 11.55 at -17.41 degrees (North through East) ! Clean map min=-0.0053571 max=0.089146 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1215+1730_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:11 2019