! Started logfile: J1215+1730_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:41:16 2019 obs J1215+1730_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1215+1730_S_2017_03_27_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.855748 visibilities/baseline/integration-bin. ! Found source: J1215+1730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 26648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1215+1730_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 612 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956968Jy sigma=0.008684 ! Fit after self-cal, rms=0.932764Jy sigma=0.008470 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=6.365 mas, bpa=-3.562 degrees ! Estimated noise=930.205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0498391 Jy ! Component: 100 - total flux cleaned = 0.0736527 Jy ! Total flux subtracted in 100 components = 0.0736527 Jy ! Clean residual min=-0.010496 max=0.016959 Jy/beam ! Clean residual mean=-0.000116 rms=0.003338 Jy/beam ! Combined flux in latest and established models = 0.0736527 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.0736527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120145Jy sigma=0.001101 ! Fit after self-cal, rms=0.119642Jy sigma=0.001095 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=7.208 mas, bpa=-0.766 degrees ! Estimated noise=519.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314569 Jy ! Component: 100 - total flux cleaned = 0.0523451 Jy ! Component: 150 - total flux cleaned = 0.0667566 Jy ! Component: 200 - total flux cleaned = 0.0768438 Jy ! Total flux subtracted in 200 components = 0.0768438 Jy ! Clean residual min=-0.011015 max=0.021722 Jy/beam ! Clean residual mean=-0.000126 rms=0.004468 Jy/beam ! Combined flux in latest and established models = 0.150496 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 91 components and 0.150496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110931Jy sigma=0.000992 ! Fit after self-cal, rms=0.110328Jy sigma=0.000986 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.64 FD 0.75 HN 1.11 KP 1.25 ! LA 0.76 MK 1.10 NL 1.93 OV 1.71 ! PT 0.58 SC 1.36 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.66 FD 0.80 HN 1.19 KP 1.30 ! LA 0.73 MK 1.04 NL 1.94 OV 1.58 ! PT 0.55 SC 1.62 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.50 FD 0.82 HN 1.15 KP 1.35 ! LA 0.74 MK 1.10 NL 1.91 OV 1.41 ! PT 0.56 SC 1.40 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 FD 0.86 HN 0.91 KP 1.00* ! LA 0.71 MK 0.88 NL 1.00* OV 1.69 ! PT 0.61 SC 0.96 ! ! ! Fit before self-cal, rms=0.110328Jy sigma=0.000986 ! Fit after self-cal, rms=0.165299Jy sigma=0.000875 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=7.918 mas, bpa=-4.809 degrees ! Estimated noise=582.742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382027 Jy ! Component: 100 - total flux cleaned = 0.0040019 Jy ! Component: 150 - total flux cleaned = 0.00394004 Jy ! Component: 200 - total flux cleaned = 0.00389046 Jy ! Total flux subtracted in 200 components = 0.00389046 Jy ! Clean residual min=-0.011781 max=0.013126 Jy/beam ! Clean residual mean=0.000031 rms=0.003529 Jy/beam ! Combined flux in latest and established models = 0.154387 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 97 components and 0.154387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164860Jy sigma=0.000875 ! Fit after self-cal, rms=0.170487Jy sigma=0.000859 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170487Jy sigma=0.000859 ! Fit after self-cal, rms=0.290363Jy sigma=0.000816 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=8.283 mas, bpa=-5.304 degrees ! Estimated noise=620.156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213395 Jy ! Component: 100 - total flux cleaned = 0.00239365 Jy ! Component: 150 - total flux cleaned = 0.00252783 Jy ! Component: 200 - total flux cleaned = 0.00259472 Jy ! Total flux subtracted in 200 components = 0.00259472 Jy ! Clean residual min=-0.008144 max=0.010929 Jy/beam ! Clean residual mean=0.000012 rms=0.002691 Jy/beam ! Combined flux in latest and established models = 0.156982 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 101 components and 0.156982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290116Jy sigma=0.000816 ! Fit after self-cal, rms=0.293490Jy sigma=0.000813 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170744 Jy ! Component: 100 - total flux cleaned = -0.00228824 Jy ! Component: 150 - total flux cleaned = -0.00240672 Jy ! Component: 200 - total flux cleaned = -0.00246013 Jy ! Total flux subtracted in 200 components = -0.00246013 Jy ! Clean residual min=-0.007382 max=0.011171 Jy/beam ! Clean residual mean=0.000005 rms=0.002723 Jy/beam ! Combined flux in latest and established models = 0.154522 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 106 components and 0.154522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293447Jy sigma=0.000813 ! Fit after self-cal, rms=0.293474Jy sigma=0.000813 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293474Jy sigma=0.000813 ! Fit after self-cal, rms=0.330733Jy sigma=0.000812 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=8.403 mas, bpa=-5.918 degrees ! Estimated noise=635.182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000458086 Jy ! Component: 100 - total flux cleaned = 0.000508664 Jy ! Component: 150 - total flux cleaned = 0.000475443 Jy ! Component: 200 - total flux cleaned = 0.000442785 Jy ! Total flux subtracted in 200 components = 0.000442785 Jy ! Clean residual min=-0.007381 max=0.011368 Jy/beam ! Clean residual mean=0.000010 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 0.154964 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 107 components and 0.154964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330641Jy sigma=0.000812 ! Fit after self-cal, rms=0.331062Jy sigma=0.000812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000402365 Jy ! Component: 100 - total flux cleaned = -0.000435752 Jy ! Component: 150 - total flux cleaned = -0.000527502 Jy ! Component: 200 - total flux cleaned = -0.000579812 Jy ! Total flux subtracted in 200 components = -0.000579812 Jy ! Clean residual min=-0.007546 max=0.011311 Jy/beam ! Clean residual mean=0.000008 rms=0.002766 Jy/beam ! Combined flux in latest and established models = 0.154385 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 107 components and 0.154385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331011Jy sigma=0.000812 ! Fit after self-cal, rms=0.331053Jy sigma=0.000812 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331053Jy sigma=0.000812 ! Fit after self-cal, rms=0.342822Jy sigma=0.000812 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.322 mas, bmaj=11.95 mas, bpa=-5.675 degrees ! Estimated noise=677.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000647135 Jy ! Component: 100 - total flux cleaned = -0.000532224 Jy ! Component: 150 - total flux cleaned = -0.000532089 Jy ! Component: 200 - total flux cleaned = -0.000569681 Jy ! Total flux subtracted in 200 components = -0.000569681 Jy ! Clean residual min=-0.011706 max=0.015757 Jy/beam ! Clean residual mean=0.000013 rms=0.004461 Jy/beam ! Combined flux in latest and established models = 0.153815 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 110 components and 0.153815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342720Jy sigma=0.000812 ! Fit after self-cal, rms=0.342918Jy sigma=0.000812 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000339678 Jy ! Component: 100 - total flux cleaned = -0.000333544 Jy ! Component: 150 - total flux cleaned = -0.000334936 Jy ! Component: 200 - total flux cleaned = -0.000336442 Jy ! Total flux subtracted in 200 components = -0.000336442 Jy ! Clean residual min=-0.011749 max=0.015677 Jy/beam ! Clean residual mean=0.000012 rms=0.004458 Jy/beam ! Combined flux in latest and established models = 0.153478 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 110 components and 0.153478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342836Jy sigma=0.000812 ! Fit after self-cal, rms=0.342895Jy sigma=0.000812 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=8.482 mas, bpa=-6.198 degrees ! Estimated noise=646.793 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.926 x 8.482 at -6.198 degrees (North through East) ! Clean map min=-0.0077099 max=0.078013 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=7.332 mas, bpa=-8.36 degrees ! Estimated noise=1220.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061648 Jy ! Component: 100 - total flux cleaned = 0.0916466 Jy ! Component: 150 - total flux cleaned = 0.110744 Jy ! Component: 200 - total flux cleaned = 0.123652 Jy ! Total flux subtracted in 200 components = 0.123652 Jy ! Clean residual min=-0.008316 max=0.010271 Jy/beam ! Clean residual mean=-0.000042 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 0.123652 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.123652 Jy ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=8.482 mas, bpa=-6.198 degrees ! Estimated noise=646.793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126266 Jy ! Component: 100 - total flux cleaned = 0.0197436 Jy ! Component: 150 - total flux cleaned = 0.0239091 Jy ! Component: 200 - total flux cleaned = 0.0263678 Jy ! Total flux subtracted in 200 components = 0.0263678 Jy ! Clean residual min=-0.008219 max=0.011295 Jy/beam ! Clean residual mean=-0.000001 rms=0.002805 Jy/beam ! Combined flux in latest and established models = 0.15002 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 69 components and 0.15002 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.322 mas, bmaj=11.95 mas, bpa=-5.675 degrees ! Estimated noise=677.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221272 Jy ! Component: 100 - total flux cleaned = 0.00238702 Jy ! Component: 150 - total flux cleaned = 0.00247026 Jy ! Component: 200 - total flux cleaned = 0.0025385 Jy ! Total flux subtracted in 200 components = 0.0025385 Jy ! Clean residual min=-0.011585 max=0.015705 Jy/beam ! Clean residual mean=0.000010 rms=0.004454 Jy/beam ! Combined flux in latest and established models = 0.152558 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.56547e-05 Jy ! Component: 100 - total flux cleaned = 8.05253e-05 Jy ! Component: 150 - total flux cleaned = 0.000104811 Jy ! Component: 200 - total flux cleaned = 0.000127152 Jy ! Total flux subtracted in 200 components = 0.000127152 Jy ! Clean residual min=-0.011630 max=0.015746 Jy/beam ! Clean residual mean=0.000010 rms=0.004455 Jy/beam ! Combined flux in latest and established models = 0.152686 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 72 components and 0.152686 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=8.482 mas, bpa=-6.198 degrees ! Estimated noise=646.793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220986 Jy ! Component: 100 - total flux cleaned = 4.20074e-05 Jy ! Component: 150 - total flux cleaned = 9.34586e-05 Jy ! Component: 200 - total flux cleaned = 0.000131875 Jy ! Total flux subtracted in 200 components = 0.000131875 Jy ! Clean residual min=-0.008011 max=0.011609 Jy/beam ! Clean residual mean=0.000006 rms=0.002811 Jy/beam ! Combined flux in latest and established models = 0.152817 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 80 components and 0.152817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342760Jy sigma=0.000813 ! Fit after self-cal, rms=0.342638Jy sigma=0.000812 wmodel J1215+1730_S_2017_03_27_pus_map.mod ! Writing 80 model components to file: J1215+1730_S_2017_03_27_pus_map.mod wobs J1215+1730_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1215+1730_S_2017_03_27_pus_uvs.fits wwins J1215+1730_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1215+1730_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509193 Jy ! Component: 100 - total flux cleaned = 0.00950916 Jy ! Component: 150 - total flux cleaned = 0.0135713 Jy ! Component: 200 - total flux cleaned = 0.0167962 Jy ! Component: 250 - total flux cleaned = 0.0192875 Jy ! Component: 300 - total flux cleaned = 0.0216864 Jy ! Component: 350 - total flux cleaned = 0.02387 Jy ! Component: 400 - total flux cleaned = 0.0261333 Jy ! Component: 450 - total flux cleaned = 0.0282163 Jy ! Component: 500 - total flux cleaned = 0.0300041 Jy ! Component: 550 - total flux cleaned = 0.032009 Jy ! Component: 600 - total flux cleaned = 0.0334868 Jy ! Component: 650 - total flux cleaned = 0.0348196 Jy ! Component: 700 - total flux cleaned = 0.0358947 Jy ! Component: 750 - total flux cleaned = 0.0369552 Jy ! Component: 800 - total flux cleaned = 0.0384659 Jy ! Component: 850 - total flux cleaned = 0.0394974 Jy ! Component: 900 - total flux cleaned = 0.0407413 Jy ! Component: 950 - total flux cleaned = 0.0417465 Jy ! Component: 1000 - total flux cleaned = 0.0427414 Jy ! Component: 1050 - total flux cleaned = 0.043506 Jy ! Component: 1100 - total flux cleaned = 0.0445866 Jy ! Component: 1150 - total flux cleaned = 0.0454419 Jy ! Component: 1200 - total flux cleaned = 0.0461824 Jy ! Component: 1250 - total flux cleaned = 0.0471266 Jy ! Component: 1300 - total flux cleaned = 0.047751 Jy ! Component: 1350 - total flux cleaned = 0.0486787 Jy ! Component: 1400 - total flux cleaned = 0.0495979 Jy ! Component: 1450 - total flux cleaned = 0.0502057 Jy ! Component: 1500 - total flux cleaned = 0.0511095 Jy ! Component: 1550 - total flux cleaned = 0.0520064 Jy ! Component: 1600 - total flux cleaned = 0.0526977 Jy ! Component: 1650 - total flux cleaned = 0.0533851 Jy ! Component: 1700 - total flux cleaned = 0.054163 Jy ! Component: 1750 - total flux cleaned = 0.0550319 Jy ! Component: 1800 - total flux cleaned = 0.0557981 Jy ! Component: 1850 - total flux cleaned = 0.0564642 Jy ! Component: 1900 - total flux cleaned = 0.0573141 Jy ! Component: 1950 - total flux cleaned = 0.0577825 Jy ! Component: 2000 - total flux cleaned = 0.0585276 Jy ! Component: 2050 - total flux cleaned = 0.0588969 Jy ! Component: 2100 - total flux cleaned = 0.059816 Jy ! Component: 2150 - total flux cleaned = 0.0603629 Jy ! Component: 2200 - total flux cleaned = 0.0609067 Jy ! Component: 2250 - total flux cleaned = 0.0615377 Jy ! Component: 2300 - total flux cleaned = 0.0618953 Jy ! Component: 2350 - total flux cleaned = 0.0625181 Jy ! Component: 2400 - total flux cleaned = 0.0627833 Jy ! Component: 2450 - total flux cleaned = 0.0636607 Jy ! Component: 2500 - total flux cleaned = 0.0638353 Jy ! Component: 2550 - total flux cleaned = 0.0642694 Jy ! Component: 2600 - total flux cleaned = 0.0649587 Jy ! Component: 2650 - total flux cleaned = 0.065473 Jy ! Component: 2700 - total flux cleaned = 0.065729 Jy ! Component: 2750 - total flux cleaned = 0.0665773 Jy ! Component: 2800 - total flux cleaned = 0.0672511 Jy ! Component: 2850 - total flux cleaned = 0.0678367 Jy ! Component: 2900 - total flux cleaned = 0.0684196 Jy ! Component: 2950 - total flux cleaned = 0.0687509 Jy ! Component: 3000 - total flux cleaned = 0.0694933 Jy ! Component: 3050 - total flux cleaned = 0.0699857 Jy ! Component: 3100 - total flux cleaned = 0.0705569 Jy ! Component: 3150 - total flux cleaned = 0.0709631 Jy ! Component: 3200 - total flux cleaned = 0.0716094 Jy ! Component: 3250 - total flux cleaned = 0.0723319 Jy ! Component: 3300 - total flux cleaned = 0.0726514 Jy ! Component: 3350 - total flux cleaned = 0.0734465 Jy ! Component: 3400 - total flux cleaned = 0.0738423 Jy ! Component: 3450 - total flux cleaned = 0.074551 Jy ! Component: 3500 - total flux cleaned = 0.0751783 Jy ! Component: 3550 - total flux cleaned = 0.0758024 Jy ! Component: 3600 - total flux cleaned = 0.0763466 Jy ! Component: 3650 - total flux cleaned = 0.0768106 Jy ! Component: 3700 - total flux cleaned = 0.0774259 Jy ! Component: 3750 - total flux cleaned = 0.0778858 Jy ! Component: 3800 - total flux cleaned = 0.0787252 Jy ! Component: 3850 - total flux cleaned = 0.079105 Jy ! Component: 3900 - total flux cleaned = 0.0797101 Jy ! Component: 3950 - total flux cleaned = 0.0803883 Jy ! Component: 4000 - total flux cleaned = 0.0808387 Jy ! Component: 4050 - total flux cleaned = 0.0815854 Jy ! Total flux subtracted in 4096 components = 0.0821809 Jy ! Clean residual min=-0.004065 max=0.004133 Jy/beam ! Clean residual mean=0.000020 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.234998 Jy keep ! Adding 475 model components to the UV plane model. ! The established model now contains 555 components and 0.234998 Jy ![Exited script file: muppet] wmap "J1215+1730_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.926 x 8.482 at -6.198 degrees (North through East) ! Clean map min=-0.0091099 max=0.076983 Jy/beam ! Writing clean map to FITS file: J1215+1730_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.076983 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00164368 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.40534 6.40534 12.8107 25.6214 51.2427 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0049 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.926 x 8.482 at -6.198 degrees (North through East) ! Clean map min=-0.0091099 max=0.076983 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1215+1730_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:41:22 2019