! Started logfile: J1213-2453_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:41:02 2019 obs J1213-2453_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1213-2453_S_2017_03_27_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.790509 visibilities/baseline/integration-bin. ! Found source: J1213-2453 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 13660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1213-2453_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 438 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.946903Jy sigma=0.006194 ! Fit after self-cal, rms=0.917546Jy sigma=0.006035 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=6.157 mas, bpa=-3.701 degrees ! Estimated noise=1454.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685185 Jy ! Component: 100 - total flux cleaned = 0.0836309 Jy ! Total flux subtracted in 100 components = 0.0836309 Jy ! Clean residual min=-0.005440 max=0.005223 Jy/beam ! Clean residual mean=0.000002 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.0836309 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0836309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113417Jy sigma=0.000653 ! Fit after self-cal, rms=0.113327Jy sigma=0.000653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=7.55 mas, bpa=-0.06136 degrees ! Estimated noise=1035.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485837 Jy ! Component: 100 - total flux cleaned = 0.00672023 Jy ! Component: 150 - total flux cleaned = 0.00757862 Jy ! Component: 200 - total flux cleaned = 0.00768565 Jy ! Total flux subtracted in 200 components = 0.00768565 Jy ! Clean residual min=-0.002735 max=0.003368 Jy/beam ! Clean residual mean=0.000004 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.0913165 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.0913165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113099Jy sigma=0.000652 ! Fit after self-cal, rms=0.113120Jy sigma=0.000652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.03 KP 1.02 ! LA 1.01 MK 0.93 NL 1.03 OV 1.03 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.07 KP 0.97 ! LA 1.04 MK 1.06 NL 0.95 OV 1.07 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.04 HN 1.02 KP 0.98 ! LA 1.04 MK 0.98 NL 0.97 OV 0.94 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.84 KP 1.00* ! LA 1.00* MK 1.35 NL 1.00* OV 0.74 ! PT 1.03 SC 0.85 ! ! ! Fit before self-cal, rms=0.113120Jy sigma=0.000652 ! Fit after self-cal, rms=0.108252Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=7.558 mas, bpa=0.3197 degrees ! Estimated noise=1031.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285303 Jy ! Component: 100 - total flux cleaned = 0.000265456 Jy ! Component: 150 - total flux cleaned = 0.000265765 Jy ! Component: 200 - total flux cleaned = 0.000296386 Jy ! Total flux subtracted in 200 components = 0.000296386 Jy ! Clean residual min=-0.002388 max=0.002949 Jy/beam ! Clean residual mean=0.000005 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0916129 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0916129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108244Jy sigma=0.000650 ! Fit after self-cal, rms=0.108127Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108127Jy sigma=0.000649 ! Fit after self-cal, rms=0.108871Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=7.559 mas, bpa=0.4029 degrees ! Estimated noise=1031.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223354 Jy ! Component: 100 - total flux cleaned = 0.000223146 Jy ! Component: 150 - total flux cleaned = 0.000239069 Jy ! Component: 200 - total flux cleaned = 0.000238721 Jy ! Total flux subtracted in 200 components = 0.000238721 Jy ! Clean residual min=-0.002301 max=0.003027 Jy/beam ! Clean residual mean=0.000003 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0918516 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0918516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108866Jy sigma=0.000649 ! Fit after self-cal, rms=0.108877Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (115, -70). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015594 Jy ! Component: 100 - total flux cleaned = 0.00125965 Jy ! Component: 150 - total flux cleaned = 0.00121085 Jy ! Component: 200 - total flux cleaned = 0.00117014 Jy ! Total flux subtracted in 200 components = 0.00117014 Jy ! Clean residual min=-0.002239 max=0.002124 Jy/beam ! Clean residual mean=0.000001 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0930218 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.0930218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108801Jy sigma=0.000648 ! Fit after self-cal, rms=0.108796Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108796Jy sigma=0.000648 ! Fit after self-cal, rms=0.108933Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=7.54 mas, bpa=0.3378 degrees ! Estimated noise=1030.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480186 Jy ! Component: 100 - total flux cleaned = 0.000480363 Jy ! Component: 150 - total flux cleaned = 0.000479905 Jy ! Component: 200 - total flux cleaned = 0.000453048 Jy ! Total flux subtracted in 200 components = 0.000453048 Jy ! Clean residual min=-0.002283 max=0.002191 Jy/beam ! Clean residual mean=0.000001 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.0934748 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.0934748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108905Jy sigma=0.000648 ! Fit after self-cal, rms=0.108890Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.04222e-05 Jy ! Component: 100 - total flux cleaned = 5.33926e-05 Jy ! Component: 150 - total flux cleaned = 5.30173e-05 Jy ! Component: 200 - total flux cleaned = 7.59604e-05 Jy ! Total flux subtracted in 200 components = 7.59604e-05 Jy ! Clean residual min=-0.002233 max=0.002254 Jy/beam ! Clean residual mean=0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0935508 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 55 components and 0.0935508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108877Jy sigma=0.000648 ! Fit after self-cal, rms=0.108875Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108875Jy sigma=0.000648 ! Fit after self-cal, rms=0.108920Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.662 mas, bmaj=16.86 mas, bpa=2.924 degrees ! Estimated noise=1267.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333282 Jy ! Component: 100 - total flux cleaned = 0.000462534 Jy ! Component: 150 - total flux cleaned = 0.000535889 Jy ! Component: 200 - total flux cleaned = 0.000601707 Jy ! Total flux subtracted in 200 components = 0.000601707 Jy ! Clean residual min=-0.002199 max=0.001912 Jy/beam ! Clean residual mean=0.000001 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0941525 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.0941525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108918Jy sigma=0.000648 ! Fit after self-cal, rms=0.108913Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.38985e-06 Jy ! Component: 100 - total flux cleaned = 4.37079e-05 Jy ! Component: 150 - total flux cleaned = 5.82954e-05 Jy ! Component: 200 - total flux cleaned = 8.60448e-05 Jy ! Total flux subtracted in 200 components = 8.60448e-05 Jy ! Clean residual min=-0.002183 max=0.001922 Jy/beam ! Clean residual mean=0.000001 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0942385 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.0942385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108914Jy sigma=0.000648 ! Fit after self-cal, rms=0.108912Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.529 mas, bpa=0.2929 degrees ! Estimated noise=1030.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.529 at 0.2929 degrees (North through East) ! Clean map min=-0.0032234 max=0.086125 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=6.145 mas, bpa=-2.922 degrees ! Estimated noise=1437.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676796 Jy ! Component: 100 - total flux cleaned = 0.0829866 Jy ! Component: 150 - total flux cleaned = 0.0875478 Jy ! Component: 200 - total flux cleaned = 0.0899776 Jy ! Total flux subtracted in 200 components = 0.0899776 Jy ! Clean residual min=-0.003995 max=0.003486 Jy/beam ! Clean residual mean=0.000000 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0899775 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0899775 Jy ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.529 mas, bpa=0.2929 degrees ! Estimated noise=1030.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175879 Jy ! Component: 100 - total flux cleaned = 0.00265883 Jy ! Component: 150 - total flux cleaned = 0.00306288 Jy ! Component: 200 - total flux cleaned = 0.00326851 Jy ! Total flux subtracted in 200 components = 0.00326851 Jy ! Clean residual min=-0.002349 max=0.002326 Jy/beam ! Clean residual mean=0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0932461 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.0932461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.662 mas, bmaj=16.86 mas, bpa=2.924 degrees ! Estimated noise=1267.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804187 Jy ! Component: 100 - total flux cleaned = 0.000898438 Jy ! Component: 150 - total flux cleaned = 0.000983455 Jy ! Component: 200 - total flux cleaned = 0.001074 Jy ! Total flux subtracted in 200 components = 0.001074 Jy ! Clean residual min=-0.002175 max=0.001943 Jy/beam ! Clean residual mean=0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0943201 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.74859e-05 Jy ! Component: 100 - total flux cleaned = 6.20994e-05 Jy ! Component: 150 - total flux cleaned = 4.79541e-05 Jy ! Component: 200 - total flux cleaned = 3.59306e-05 Jy ! Total flux subtracted in 200 components = 3.59306e-05 Jy ! Clean residual min=-0.002138 max=0.001949 Jy/beam ! Clean residual mean=0.000000 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.094356 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.094356 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.529 mas, bpa=0.2929 degrees ! Estimated noise=1030.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.04481e-05 Jy ! Component: 100 - total flux cleaned = -7.2841e-05 Jy ! Component: 150 - total flux cleaned = -0.000103364 Jy ! Component: 200 - total flux cleaned = -0.000130435 Jy ! Total flux subtracted in 200 components = -0.000130435 Jy ! Clean residual min=-0.002251 max=0.002321 Jy/beam ! Clean residual mean=0.000000 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0942255 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.0942256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108918Jy sigma=0.000648 ! Fit after self-cal, rms=0.108919Jy sigma=0.000648 wmodel J1213-2453_S_2017_03_27_pus_map.mod ! Writing 57 model components to file: J1213-2453_S_2017_03_27_pus_map.mod wobs J1213-2453_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1213-2453_S_2017_03_27_pus_uvs.fits wwins J1213-2453_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J1213-2453_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020742 Jy ! Component: 100 - total flux cleaned = 0.00050497 Jy ! Component: 150 - total flux cleaned = 0.000645495 Jy ! Component: 200 - total flux cleaned = 0.000646149 Jy ! Component: 250 - total flux cleaned = 0.000646928 Jy ! Component: 300 - total flux cleaned = 0.000523563 Jy ! Component: 350 - total flux cleaned = 0.000434597 Jy ! Component: 400 - total flux cleaned = 0.000464188 Jy ! Component: 450 - total flux cleaned = 0.000464511 Jy ! Component: 500 - total flux cleaned = 0.000547969 Jy ! Component: 550 - total flux cleaned = 0.000602143 Jy ! Component: 600 - total flux cleaned = 0.000574657 Jy ! Component: 650 - total flux cleaned = 0.000522144 Jy ! Component: 700 - total flux cleaned = 0.000574205 Jy ! Component: 750 - total flux cleaned = 0.000497685 Jy ! Component: 800 - total flux cleaned = 0.0005729 Jy ! Component: 850 - total flux cleaned = 0.000548074 Jy ! Component: 900 - total flux cleaned = 0.000500048 Jy ! Component: 950 - total flux cleaned = 0.000548294 Jy ! Component: 1000 - total flux cleaned = 0.000571206 Jy ! Component: 1050 - total flux cleaned = 0.000570521 Jy ! Component: 1100 - total flux cleaned = 0.000524774 Jy ! Component: 1150 - total flux cleaned = 0.000592522 Jy ! Component: 1200 - total flux cleaned = 0.000547901 Jy ! Component: 1250 - total flux cleaned = 0.000548351 Jy ! Component: 1300 - total flux cleaned = 0.000570161 Jy ! Component: 1350 - total flux cleaned = 0.00059175 Jy ! Component: 1400 - total flux cleaned = 0.000613032 Jy ! Component: 1450 - total flux cleaned = 0.000634059 Jy ! Component: 1500 - total flux cleaned = 0.000654907 Jy ! Component: 1550 - total flux cleaned = 0.00065494 Jy ! Component: 1600 - total flux cleaned = 0.000735379 Jy ! Component: 1650 - total flux cleaned = 0.00073524 Jy ! Component: 1700 - total flux cleaned = 0.000774534 Jy ! Component: 1750 - total flux cleaned = 0.000794118 Jy ! Component: 1800 - total flux cleaned = 0.000832798 Jy ! Component: 1850 - total flux cleaned = 0.000871048 Jy ! Component: 1900 - total flux cleaned = 0.000852232 Jy ! Component: 1950 - total flux cleaned = 0.000908476 Jy ! Component: 2000 - total flux cleaned = 0.000889873 Jy ! Component: 2050 - total flux cleaned = 0.000853212 Jy ! Component: 2100 - total flux cleaned = 0.000889799 Jy ! Component: 2150 - total flux cleaned = 0.000835912 Jy ! Component: 2200 - total flux cleaned = 0.000925134 Jy ! Component: 2250 - total flux cleaned = 0.000872039 Jy ! Component: 2300 - total flux cleaned = 0.000907219 Jy ! Component: 2350 - total flux cleaned = 0.000959644 Jy ! Component: 2400 - total flux cleaned = 0.000907825 Jy ! Component: 2450 - total flux cleaned = 0.000976297 Jy ! Component: 2500 - total flux cleaned = 0.000976175 Jy ! Component: 2550 - total flux cleaned = 0.000959198 Jy ! Component: 2600 - total flux cleaned = 0.00104225 Jy ! Component: 2650 - total flux cleaned = 0.00102566 Jy ! Component: 2700 - total flux cleaned = 0.00102567 Jy ! Component: 2750 - total flux cleaned = 0.00105825 Jy ! Component: 2800 - total flux cleaned = 0.0011226 Jy ! Component: 2850 - total flux cleaned = 0.00118642 Jy ! Component: 2900 - total flux cleaned = 0.00123358 Jy ! Component: 2950 - total flux cleaned = 0.00126481 Jy ! Component: 3000 - total flux cleaned = 0.00131132 Jy ! Component: 3050 - total flux cleaned = 0.00129591 Jy ! Component: 3100 - total flux cleaned = 0.00132657 Jy ! Component: 3150 - total flux cleaned = 0.00138743 Jy ! Component: 3200 - total flux cleaned = 0.00141779 Jy ! Component: 3250 - total flux cleaned = 0.00143279 Jy ! Component: 3300 - total flux cleaned = 0.0014773 Jy ! Component: 3350 - total flux cleaned = 0.00146267 Jy ! Component: 3400 - total flux cleaned = 0.00150656 Jy ! Component: 3450 - total flux cleaned = 0.00155014 Jy ! Component: 3500 - total flux cleaned = 0.00153562 Jy ! Component: 3550 - total flux cleaned = 0.00162172 Jy ! Component: 3600 - total flux cleaned = 0.00165021 Jy ! Component: 3650 - total flux cleaned = 0.00169259 Jy ! Component: 3700 - total flux cleaned = 0.0017207 Jy ! Component: 3750 - total flux cleaned = 0.00174871 Jy ! Component: 3800 - total flux cleaned = 0.00172082 Jy ! Component: 3850 - total flux cleaned = 0.00173456 Jy ! Component: 3900 - total flux cleaned = 0.00178923 Jy ! Component: 3950 - total flux cleaned = 0.00180273 Jy ! Component: 4000 - total flux cleaned = 0.00182972 Jy ! Component: 4050 - total flux cleaned = 0.00180282 Jy ! Total flux subtracted in 4096 components = 0.00184276 Jy ! Clean residual min=-0.000742 max=0.000909 Jy/beam ! Clean residual mean=-0.000002 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.0960683 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 316 components and 0.0960683 Jy ![Exited script file: muppet] wmap "J1213-2453_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.529 at 0.2929 degrees (North through East) ! Clean map min=-0.0029133 max=0.085782 Jy/beam ! Writing clean map to FITS file: J1213-2453_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0857816 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.856968 0.856968 1.71394 3.42787 6.85575 13.7115 27.423 54.846 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.529 at 0.2929 degrees (North through East) ! Clean map min=-0.0029133 max=0.085782 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1213-2453_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:41:06 2019