! Started logfile: J1213-1658_S_2017_07_09_pus_uvs.log on Wed May 8 14:48:19 2019 obs J1213-1658_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1213-1658_S_2017_07_09_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785314 visibilities/baseline/integration-bin. ! Found source: J1213-1658 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 16256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1213-1658_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 776 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977514Jy sigma=0.008298 ! Fit after self-cal, rms=0.948085Jy sigma=0.008063 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.473 mas, bmaj=7.003 mas, bpa=-7.094 degrees ! Estimated noise=1031.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.041566 Jy ! Component: 100 - total flux cleaned = 0.0517479 Jy ! Total flux subtracted in 100 components = 0.0517479 Jy ! Clean residual min=-0.003655 max=0.004619 Jy/beam ! Clean residual mean=-0.000005 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0517479 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0517479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080891Jy sigma=0.000667 ! Fit after self-cal, rms=0.080467Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=8.161 mas, bpa=-6.962 degrees ! Estimated noise=762.351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611823 Jy ! Component: 100 - total flux cleaned = 0.00907268 Jy ! Component: 150 - total flux cleaned = 0.0106454 Jy ! Component: 200 - total flux cleaned = 0.0115307 Jy ! Total flux subtracted in 200 components = 0.0115307 Jy ! Clean residual min=-0.002369 max=0.002491 Jy/beam ! Clean residual mean=-0.000004 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0632787 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.0632787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080033Jy sigma=0.000659 ! Fit after self-cal, rms=0.079976Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.17 KP 1.04 ! LA 1.02 MK 1.08 NL 0.91 OV 1.01 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.09 KP 1.00 ! LA 0.93 MK 1.01 NL 0.93 OV 1.09 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.96 KP 0.97 ! LA 0.91 MK 1.08 NL 1.03 OV 0.94 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! A total of 198 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.82 KP 1.00* ! LA 1.00* MK 0.81 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.079976Jy sigma=0.000659 ! Fit after self-cal, rms=0.081043Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.976 mas, bmaj=8.176 mas, bpa=-6.565 degrees ! Estimated noise=771.878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024252 Jy ! Component: 100 - total flux cleaned = 0.000206261 Jy ! Component: 150 - total flux cleaned = 0.000173408 Jy ! Component: 200 - total flux cleaned = 0.000187493 Jy ! Total flux subtracted in 200 components = 0.000187493 Jy ! Clean residual min=-0.002063 max=0.002064 Jy/beam ! Clean residual mean=-0.000003 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0634662 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0634662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081035Jy sigma=0.000659 ! Fit after self-cal, rms=0.081086Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081086Jy sigma=0.000659 ! Fit after self-cal, rms=0.081441Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=8.192 mas, bpa=-6.477 degrees ! Estimated noise=772.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136524 Jy ! Component: 100 - total flux cleaned = 0.000151907 Jy ! Component: 150 - total flux cleaned = 0.000166223 Jy ! Component: 200 - total flux cleaned = 0.000179486 Jy ! Total flux subtracted in 200 components = 0.000179486 Jy ! Clean residual min=-0.002047 max=0.001905 Jy/beam ! Clean residual mean=-0.000005 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0636457 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.0636457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081434Jy sigma=0.000659 ! Fit after self-cal, rms=0.081476Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.62361e-05 Jy ! Component: 100 - total flux cleaned = 2.56368e-05 Jy ! Component: 150 - total flux cleaned = 3.86441e-05 Jy ! Component: 200 - total flux cleaned = 6.20069e-05 Jy ! Total flux subtracted in 200 components = 6.20069e-05 Jy ! Clean residual min=-0.002105 max=0.001858 Jy/beam ! Clean residual mean=-0.000005 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0637077 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0637077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081470Jy sigma=0.000658 ! Fit after self-cal, rms=0.081468Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081468Jy sigma=0.000658 ! Fit after self-cal, rms=0.081564Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=8.189 mas, bpa=-6.431 degrees ! Estimated noise=770.995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.96982e-05 Jy ! Component: 100 - total flux cleaned = 7.60509e-05 Jy ! Component: 150 - total flux cleaned = 8.93267e-05 Jy ! Component: 200 - total flux cleaned = 0.000101306 Jy ! Total flux subtracted in 200 components = 0.000101306 Jy ! Clean residual min=-0.002110 max=0.001778 Jy/beam ! Clean residual mean=-0.000006 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.063809 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.063809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081558Jy sigma=0.000658 ! Fit after self-cal, rms=0.081575Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.36507e-06 Jy ! Component: 100 - total flux cleaned = 6.76303e-06 Jy ! Component: 150 - total flux cleaned = 6.93755e-06 Jy ! Component: 200 - total flux cleaned = 2.80508e-05 Jy ! Total flux subtracted in 200 components = 2.80508e-05 Jy ! Clean residual min=-0.002135 max=0.001788 Jy/beam ! Clean residual mean=-0.000006 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.063837 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.063837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081571Jy sigma=0.000658 ! Fit after self-cal, rms=0.081570Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081570Jy sigma=0.000658 ! Fit after self-cal, rms=0.081472Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.384 mas, bmaj=17.7 mas, bpa=-5.673 degrees ! Estimated noise=994.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420819 Jy ! Component: 100 - total flux cleaned = 0.000440129 Jy ! Component: 150 - total flux cleaned = 0.000440127 Jy ! Component: 200 - total flux cleaned = 0.000428191 Jy ! Total flux subtracted in 200 components = 0.000428191 Jy ! Clean residual min=-0.002431 max=0.002027 Jy/beam ! Clean residual mean=-0.000013 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0642652 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 55 components and 0.0642652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081473Jy sigma=0.000658 ! Fit after self-cal, rms=0.081469Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.71456e-07 Jy ! Component: 100 - total flux cleaned = -1.74586e-05 Jy ! Component: 150 - total flux cleaned = -1.84617e-05 Jy ! Component: 200 - total flux cleaned = -1.80829e-05 Jy ! Total flux subtracted in 200 components = -1.80829e-05 Jy ! Clean residual min=-0.002427 max=0.002045 Jy/beam ! Clean residual mean=-0.000013 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0642471 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.0642471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081470Jy sigma=0.000658 ! Fit after self-cal, rms=0.081466Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=8.179 mas, bpa=-6.376 degrees ! Estimated noise=769.845 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 8.179 at -6.376 degrees (North through East) ! Clean map min=-0.001981 max=0.052747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.478 mas, bmaj=7.024 mas, bpa=-6.889 degrees ! Estimated noise=1076.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413448 Jy ! Component: 100 - total flux cleaned = 0.0519378 Jy ! Component: 150 - total flux cleaned = 0.0569923 Jy ! Component: 200 - total flux cleaned = 0.0598959 Jy ! Total flux subtracted in 200 components = 0.0598959 Jy ! Clean residual min=-0.002650 max=0.002611 Jy/beam ! Clean residual mean=-0.000004 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0598959 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0598959 Jy ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=8.179 mas, bpa=-6.376 degrees ! Estimated noise=769.845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280364 Jy ! Component: 100 - total flux cleaned = 0.00451731 Jy ! Component: 150 - total flux cleaned = 0.00557666 Jy ! Component: 200 - total flux cleaned = 0.00589999 Jy ! Total flux subtracted in 200 components = 0.00589999 Jy ! Clean residual min=-0.002013 max=0.001696 Jy/beam ! Clean residual mean=-0.000006 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0657959 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 64 components and 0.065796 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.384 mas, bmaj=17.7 mas, bpa=-5.673 degrees ! Estimated noise=994.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464919 Jy ! Component: 100 - total flux cleaned = 0.000563279 Jy ! Component: 150 - total flux cleaned = 0.000606459 Jy ! Component: 200 - total flux cleaned = 0.0006631 Jy ! Total flux subtracted in 200 components = 0.0006631 Jy ! Clean residual min=-0.002092 max=0.001796 Jy/beam ! Clean residual mean=-0.000011 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0664591 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.35211e-05 Jy ! Component: 100 - total flux cleaned = 6.39126e-05 Jy ! Component: 150 - total flux cleaned = 9.15891e-05 Jy ! Component: 200 - total flux cleaned = 0.000117023 Jy ! Total flux subtracted in 200 components = 0.000117023 Jy ! Clean residual min=-0.002041 max=0.001776 Jy/beam ! Clean residual mean=-0.000011 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0665761 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 77 components and 0.0665761 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=8.179 mas, bpa=-6.376 degrees ! Estimated noise=769.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157108 Jy ! Component: 100 - total flux cleaned = -0.000159843 Jy ! Component: 150 - total flux cleaned = -0.000160713 Jy ! Component: 200 - total flux cleaned = -0.000186091 Jy ! Total flux subtracted in 200 components = -0.000186091 Jy ! Clean residual min=-0.001874 max=0.001841 Jy/beam ! Clean residual mean=-0.000005 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.06639 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 0.06639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081437Jy sigma=0.000658 ! Fit after self-cal, rms=0.081422Jy sigma=0.000658 wmodel J1213-1658_S_2017_07_09_pus_map.mod ! Writing 89 model components to file: J1213-1658_S_2017_07_09_pus_map.mod wobs J1213-1658_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1213-1658_S_2017_07_09_pus_uvs.fits wwins J1213-1658_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J1213-1658_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373449 Jy ! Component: 100 - total flux cleaned = -0.000314351 Jy ! Component: 150 - total flux cleaned = -0.000258694 Jy ! Component: 200 - total flux cleaned = -6.66905e-05 Jy ! Component: 250 - total flux cleaned = 3.8913e-05 Jy ! Component: 300 - total flux cleaned = 3.83693e-05 Jy ! Component: 350 - total flux cleaned = 3.82388e-05 Jy ! Component: 400 - total flux cleaned = 1.43528e-05 Jy ! Component: 450 - total flux cleaned = 6.18154e-05 Jy ! Component: 500 - total flux cleaned = 6.20839e-05 Jy ! Component: 550 - total flux cleaned = 8.47971e-05 Jy ! Component: 600 - total flux cleaned = 0.000129112 Jy ! Component: 650 - total flux cleaned = 8.59146e-05 Jy ! Component: 700 - total flux cleaned = 0.000170199 Jy ! Component: 750 - total flux cleaned = 0.00010803 Jy ! Component: 800 - total flux cleaned = 0.000108075 Jy ! Component: 850 - total flux cleaned = 0.000128655 Jy ! Component: 900 - total flux cleaned = 0.000109098 Jy ! Component: 950 - total flux cleaned = 8.98889e-05 Jy ! Component: 1000 - total flux cleaned = 7.0967e-05 Jy ! Component: 1050 - total flux cleaned = 5.26891e-05 Jy ! Component: 1100 - total flux cleaned = 5.30197e-05 Jy ! Component: 1150 - total flux cleaned = -1.04579e-06 Jy ! Component: 1200 - total flux cleaned = -3.65602e-05 Jy ! Component: 1250 - total flux cleaned = -8.8868e-05 Jy ! Component: 1300 - total flux cleaned = -0.000105842 Jy ! Component: 1350 - total flux cleaned = -0.000122743 Jy ! Component: 1400 - total flux cleaned = -0.000106188 Jy ! Component: 1450 - total flux cleaned = -0.000139352 Jy ! Component: 1500 - total flux cleaned = -0.000156175 Jy ! Component: 1550 - total flux cleaned = -0.000204991 Jy ! Component: 1600 - total flux cleaned = -0.000204831 Jy ! Component: 1650 - total flux cleaned = -0.000235966 Jy ! Component: 1700 - total flux cleaned = -0.000251442 Jy ! Component: 1750 - total flux cleaned = -0.000251594 Jy ! Component: 1800 - total flux cleaned = -0.000251752 Jy ! Component: 1850 - total flux cleaned = -0.000221792 Jy ! Component: 1900 - total flux cleaned = -0.000236903 Jy ! Component: 1950 - total flux cleaned = -0.0002808 Jy ! Component: 2000 - total flux cleaned = -0.000251826 Jy ! Component: 2050 - total flux cleaned = -0.000251862 Jy ! Component: 2100 - total flux cleaned = -0.000280154 Jy ! Component: 2150 - total flux cleaned = -0.00026598 Jy ! Component: 2200 - total flux cleaned = -0.000293678 Jy ! Component: 2250 - total flux cleaned = -0.000266046 Jy ! Component: 2300 - total flux cleaned = -0.000238821 Jy ! Component: 2350 - total flux cleaned = -0.000211933 Jy ! Component: 2400 - total flux cleaned = -0.000211888 Jy ! Component: 2450 - total flux cleaned = -0.000172037 Jy ! Component: 2500 - total flux cleaned = -0.000158942 Jy ! Component: 2550 - total flux cleaned = -0.000171864 Jy ! Component: 2600 - total flux cleaned = -0.000146157 Jy ! Component: 2650 - total flux cleaned = -0.000120494 Jy ! Component: 2700 - total flux cleaned = -0.000158631 Jy ! Component: 2750 - total flux cleaned = -0.000146022 Jy ! Component: 2800 - total flux cleaned = -8.33548e-05 Jy ! Component: 2850 - total flux cleaned = -3.37597e-05 Jy ! Component: 2900 - total flux cleaned = -3.35934e-05 Jy ! Component: 2950 - total flux cleaned = 2.76709e-05 Jy ! Component: 3000 - total flux cleaned = 2.7707e-05 Jy ! Component: 3050 - total flux cleaned = 8.81942e-05 Jy ! Component: 3100 - total flux cleaned = 0.000172189 Jy ! Component: 3150 - total flux cleaned = 0.000183988 Jy ! Component: 3200 - total flux cleaned = 0.000207532 Jy ! Component: 3250 - total flux cleaned = 0.000231016 Jy ! Component: 3300 - total flux cleaned = 0.000219303 Jy ! Component: 3350 - total flux cleaned = 0.000288824 Jy ! Component: 3400 - total flux cleaned = 0.000311821 Jy ! Component: 3450 - total flux cleaned = 0.000311893 Jy ! Component: 3500 - total flux cleaned = 0.00035736 Jy ! Component: 3550 - total flux cleaned = 0.000323506 Jy ! Component: 3600 - total flux cleaned = 0.000345947 Jy ! Component: 3650 - total flux cleaned = 0.000368329 Jy ! Component: 3700 - total flux cleaned = 0.000368328 Jy ! Component: 3750 - total flux cleaned = 0.000357218 Jy ! Component: 3800 - total flux cleaned = 0.000313455 Jy ! Component: 3850 - total flux cleaned = 0.000324423 Jy ! Component: 3900 - total flux cleaned = 0.000324496 Jy ! Component: 3950 - total flux cleaned = 0.00030292 Jy ! Component: 4000 - total flux cleaned = 0.000270739 Jy ! Component: 4050 - total flux cleaned = 0.000292032 Jy ! Total flux subtracted in 4096 components = 0.000238889 Jy ! Clean residual min=-0.000660 max=0.000674 Jy/beam ! Clean residual mean=-0.000002 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0666288 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 376 components and 0.0666289 Jy ![Exited script file: muppet] wmap "J1213-1658_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 8.179 at -6.376 degrees (North through East) ! Clean map min=-0.0012653 max=0.05323 Jy/beam ! Writing clean map to FITS file: J1213-1658_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0532296 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183631 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03493 1.03493 2.06987 4.13974 8.27948 16.559 33.1179 66.2358 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.971 x 8.179 at -6.376 degrees (North through East) ! Clean map min=-0.0012653 max=0.05323 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1213-1658_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:48:24 2019