! Started logfile: J1213-1003_S_2017_07_09_pus_uvs.log on Wed May 8 14:48:15 2019 obs J1213-1003_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1213-1003_S_2017_07_09_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.766061 visibilities/baseline/integration-bin. ! Found source: J1213-1003 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 7584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1213-1003_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934538Jy sigma=0.008087 ! Fit after self-cal, rms=0.906014Jy sigma=0.007847 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=7.163 mas, bpa=-5.42 degrees ! Estimated noise=1385.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675773 Jy ! Component: 100 - total flux cleaned = 0.0911784 Jy ! Total flux subtracted in 100 components = 0.0911784 Jy ! Clean residual min=-0.009806 max=0.024495 Jy/beam ! Clean residual mean=0.000015 rms=0.003023 Jy/beam ! Combined flux in latest and established models = 0.0911784 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0911784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095090Jy sigma=0.000809 ! Fit after self-cal, rms=0.094980Jy sigma=0.000807 ! Inverting map ! Added new window around map position (6, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221819 Jy ! Component: 100 - total flux cleaned = 0.0356754 Jy ! Total flux subtracted in 100 components = 0.0356754 Jy ! Clean residual min=-0.007471 max=0.012617 Jy/beam ! Clean residual mean=0.000009 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.126854 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.126854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087039Jy sigma=0.000732 ! Fit after self-cal, rms=0.085923Jy sigma=0.000722 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147443 Jy ! Component: 100 - total flux cleaned = 0.0238809 Jy ! Total flux subtracted in 100 components = 0.0238809 Jy ! Clean residual min=-0.006137 max=0.007355 Jy/beam ! Clean residual mean=0.000005 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.150735 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 55 components and 0.150735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082120Jy sigma=0.000687 ! Fit after self-cal, rms=0.081655Jy sigma=0.000682 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00936326 Jy ! Component: 100 - total flux cleaned = 0.0152882 Jy ! Total flux subtracted in 100 components = 0.0152882 Jy ! Clean residual min=-0.005313 max=0.005428 Jy/beam ! Clean residual mean=0.000002 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.166023 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.166023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080076Jy sigma=0.000668 ! Fit after self-cal, rms=0.079907Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=8.31 mas, bpa=-5.537 degrees ! Estimated noise=1048.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00754987 Jy ! Component: 100 - total flux cleaned = 0.0116395 Jy ! Component: 150 - total flux cleaned = 0.014163 Jy ! Component: 200 - total flux cleaned = 0.015208 Jy ! Total flux subtracted in 200 components = 0.015208 Jy ! Clean residual min=-0.003897 max=0.004984 Jy/beam ! Clean residual mean=0.000002 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.181231 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.181231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079163Jy sigma=0.000660 ! Fit after self-cal, rms=0.079065Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.27 KP 1.06 ! LA 1.03 MK 1.02 NL 0.86 OV 1.03 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.04 KP 1.01 ! LA 0.96 MK 1.00 NL 1.00 OV 1.12 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.09 KP 0.98 ! LA 1.01 MK 1.04 NL 0.98 OV 1.01 ! PT 0.94 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.79 KP 1.00* ! LA 0.90 MK 1.08 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.079065Jy sigma=0.000659 ! Fit after self-cal, rms=0.080845Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=8.373 mas, bpa=-5.614 degrees ! Estimated noise=1069.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119875 Jy ! Component: 100 - total flux cleaned = 0.00131419 Jy ! Component: 150 - total flux cleaned = 0.00126945 Jy ! Component: 200 - total flux cleaned = 0.00115867 Jy ! Total flux subtracted in 200 components = 0.00115867 Jy ! Clean residual min=-0.003243 max=0.003218 Jy/beam ! Clean residual mean=0.000002 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.18239 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.18239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080747Jy sigma=0.000655 ! Fit after self-cal, rms=0.080750Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080750Jy sigma=0.000654 ! Fit after self-cal, rms=0.081591Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.391 mas, bpa=-5.632 degrees ! Estimated noise=1069.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0009148 Jy ! Component: 100 - total flux cleaned = 0.00100583 Jy ! Component: 150 - total flux cleaned = 0.000905876 Jy ! Component: 200 - total flux cleaned = 0.000846667 Jy ! Total flux subtracted in 200 components = 0.000846667 Jy ! Clean residual min=-0.003041 max=0.003105 Jy/beam ! Clean residual mean=0.000004 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.183236 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.183236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081537Jy sigma=0.000652 ! Fit after self-cal, rms=0.081541Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230703 Jy ! Component: 100 - total flux cleaned = 0.000298649 Jy ! Component: 150 - total flux cleaned = 0.000273335 Jy ! Component: 200 - total flux cleaned = 0.000251017 Jy ! Total flux subtracted in 200 components = 0.000251017 Jy ! Clean residual min=-0.002987 max=0.002985 Jy/beam ! Clean residual mean=0.000004 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.183487 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 90 components and 0.183487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081514Jy sigma=0.000651 ! Fit after self-cal, rms=0.081512Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081512Jy sigma=0.000651 ! Fit after self-cal, rms=0.081515Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=8.396 mas, bpa=-5.773 degrees ! Estimated noise=1063.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291825 Jy ! Component: 100 - total flux cleaned = 0.000325679 Jy ! Component: 150 - total flux cleaned = 0.000279389 Jy ! Component: 200 - total flux cleaned = 0.000279417 Jy ! Total flux subtracted in 200 components = 0.000279417 Jy ! Clean residual min=-0.002924 max=0.002928 Jy/beam ! Clean residual mean=0.000005 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.183767 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 90 components and 0.183767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081493Jy sigma=0.000651 ! Fit after self-cal, rms=0.081499Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010093 Jy ! Component: 100 - total flux cleaned = 0.000124075 Jy ! Component: 150 - total flux cleaned = 0.000124032 Jy ! Component: 200 - total flux cleaned = 8.85875e-05 Jy ! Total flux subtracted in 200 components = 8.85875e-05 Jy ! Clean residual min=-0.002925 max=0.002924 Jy/beam ! Clean residual mean=0.000005 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.183855 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 91 components and 0.183855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081487Jy sigma=0.000651 ! Fit after self-cal, rms=0.081488Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081488Jy sigma=0.000651 ! Fit after self-cal, rms=0.081367Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.194 mas, bmaj=16.76 mas, bpa=-7.623 degrees ! Estimated noise=1359.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157227 Jy ! Component: 100 - total flux cleaned = 0.000140447 Jy ! Component: 150 - total flux cleaned = 0.000139685 Jy ! Component: 200 - total flux cleaned = 0.000125833 Jy ! Total flux subtracted in 200 components = 0.000125833 Jy ! Clean residual min=-0.003777 max=0.002926 Jy/beam ! Clean residual mean=0.000009 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.183981 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 98 components and 0.183981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081361Jy sigma=0.000651 ! Fit after self-cal, rms=0.081365Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28345e-05 Jy ! Component: 100 - total flux cleaned = -2.31586e-06 Jy ! Component: 150 - total flux cleaned = -1.54412e-05 Jy ! Component: 200 - total flux cleaned = -1.57749e-05 Jy ! Total flux subtracted in 200 components = -1.57749e-05 Jy ! Clean residual min=-0.003775 max=0.002910 Jy/beam ! Clean residual mean=0.000009 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.183965 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 100 components and 0.183965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081363Jy sigma=0.000651 ! Fit after self-cal, rms=0.081364Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=8.392 mas, bpa=-5.818 degrees ! Estimated noise=1060.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 8.392 at -5.818 degrees (North through East) ! Clean map min=-0.0027436 max=0.079964 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=7.241 mas, bpa=-5.707 degrees ! Estimated noise=1404.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716186 Jy ! Component: 100 - total flux cleaned = 0.104634 Jy ! Component: 150 - total flux cleaned = 0.124354 Jy ! Component: 200 - total flux cleaned = 0.138143 Jy ! Total flux subtracted in 200 components = 0.138143 Jy ! Clean residual min=-0.004695 max=0.007859 Jy/beam ! Clean residual mean=0.000011 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.138143 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.138143 Jy ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=8.392 mas, bpa=-5.818 degrees ! Estimated noise=1060.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016513 Jy ! Component: 100 - total flux cleaned = 0.0266609 Jy ! Component: 150 - total flux cleaned = 0.0331729 Jy ! Component: 200 - total flux cleaned = 0.0374294 Jy ! Total flux subtracted in 200 components = 0.0374294 Jy ! Clean residual min=-0.003316 max=0.003079 Jy/beam ! Clean residual mean=0.000009 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.175573 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 79 components and 0.175573 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.194 mas, bmaj=16.76 mas, bpa=-7.623 degrees ! Estimated noise=1359.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043643 Jy ! Component: 100 - total flux cleaned = 0.00624654 Jy ! Component: 150 - total flux cleaned = 0.00713297 Jy ! Component: 200 - total flux cleaned = 0.00722437 Jy ! Total flux subtracted in 200 components = 0.00722437 Jy ! Clean residual min=-0.003660 max=0.002824 Jy/beam ! Clean residual mean=0.000011 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.182797 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88191e-05 Jy ! Component: 100 - total flux cleaned = 7.21934e-05 Jy ! Component: 150 - total flux cleaned = 0.000101327 Jy ! Component: 200 - total flux cleaned = 0.00012697 Jy ! Total flux subtracted in 200 components = 0.00012697 Jy ! Clean residual min=-0.003671 max=0.002820 Jy/beam ! Clean residual mean=0.000010 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.182924 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 103 components and 0.182924 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=8.392 mas, bpa=-5.818 degrees ! Estimated noise=1060.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000318863 Jy ! Component: 100 - total flux cleaned = -0.000284026 Jy ! Component: 150 - total flux cleaned = -0.000283287 Jy ! Component: 200 - total flux cleaned = -0.000255684 Jy ! Total flux subtracted in 200 components = -0.000255684 Jy ! Clean residual min=-0.002976 max=0.002899 Jy/beam ! Clean residual mean=0.000005 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.182668 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 109 components and 0.182668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081339Jy sigma=0.000650 ! Fit after self-cal, rms=0.081331Jy sigma=0.000650 wmodel J1213-1003_S_2017_07_09_pus_map.mod ! Writing 109 model components to file: J1213-1003_S_2017_07_09_pus_map.mod wobs J1213-1003_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1213-1003_S_2017_07_09_pus_uvs.fits wwins J1213-1003_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J1213-1003_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047058 Jy ! Component: 100 - total flux cleaned = -0.000933643 Jy ! Component: 150 - total flux cleaned = -0.00128177 Jy ! Component: 200 - total flux cleaned = -0.00153073 Jy ! Component: 250 - total flux cleaned = -0.00172891 Jy ! Component: 300 - total flux cleaned = -0.00191924 Jy ! Component: 350 - total flux cleaned = -0.00206612 Jy ! Component: 400 - total flux cleaned = -0.00199619 Jy ! Component: 450 - total flux cleaned = -0.00199737 Jy ! Component: 500 - total flux cleaned = -0.00182986 Jy ! Component: 550 - total flux cleaned = -0.00179776 Jy ! Component: 600 - total flux cleaned = -0.00170336 Jy ! Component: 650 - total flux cleaned = -0.00167331 Jy ! Component: 700 - total flux cleaned = -0.00161337 Jy ! Component: 750 - total flux cleaned = -0.0016127 Jy ! Component: 800 - total flux cleaned = -0.00143817 Jy ! Component: 850 - total flux cleaned = -0.00135259 Jy ! Component: 900 - total flux cleaned = -0.00126931 Jy ! Component: 950 - total flux cleaned = -0.0012147 Jy ! Component: 1000 - total flux cleaned = -0.00108036 Jy ! Component: 1050 - total flux cleaned = -0.00100175 Jy ! Component: 1100 - total flux cleaned = -0.000924132 Jy ! Component: 1150 - total flux cleaned = -0.000822647 Jy ! Component: 1200 - total flux cleaned = -0.000747152 Jy ! Component: 1250 - total flux cleaned = -0.00069763 Jy ! Component: 1300 - total flux cleaned = -0.000600162 Jy ! Component: 1350 - total flux cleaned = -0.000696329 Jy ! Component: 1400 - total flux cleaned = -0.000601423 Jy ! Component: 1450 - total flux cleaned = -0.000601092 Jy ! Component: 1500 - total flux cleaned = -0.000532051 Jy ! Component: 1550 - total flux cleaned = -0.000508906 Jy ! Component: 1600 - total flux cleaned = -0.000508557 Jy ! Component: 1650 - total flux cleaned = -0.000486594 Jy ! Component: 1700 - total flux cleaned = -0.000486824 Jy ! Component: 1750 - total flux cleaned = -0.000530536 Jy ! Component: 1800 - total flux cleaned = -0.000551939 Jy ! Component: 1850 - total flux cleaned = -0.000552353 Jy ! Component: 1900 - total flux cleaned = -0.00067661 Jy ! Component: 1950 - total flux cleaned = -0.000573844 Jy ! Component: 2000 - total flux cleaned = -0.00059449 Jy ! Component: 2050 - total flux cleaned = -0.000634795 Jy ! Component: 2100 - total flux cleaned = -0.000634318 Jy ! Component: 2150 - total flux cleaned = -0.000673562 Jy ! Component: 2200 - total flux cleaned = -0.000673503 Jy ! Component: 2250 - total flux cleaned = -0.000673351 Jy ! Component: 2300 - total flux cleaned = -0.000654144 Jy ! Component: 2350 - total flux cleaned = -0.000710466 Jy ! Component: 2400 - total flux cleaned = -0.000672654 Jy ! Component: 2450 - total flux cleaned = -0.000727998 Jy ! Component: 2500 - total flux cleaned = -0.000636833 Jy ! Component: 2550 - total flux cleaned = -0.000673166 Jy ! Component: 2600 - total flux cleaned = -0.000691123 Jy ! Component: 2650 - total flux cleaned = -0.000637924 Jy ! Component: 2700 - total flux cleaned = -0.000620381 Jy ! Component: 2750 - total flux cleaned = -0.000637644 Jy ! Component: 2800 - total flux cleaned = -0.000620335 Jy ! Component: 2850 - total flux cleaned = -0.000586264 Jy ! Component: 2900 - total flux cleaned = -0.000552612 Jy ! Component: 2950 - total flux cleaned = -0.000468633 Jy ! Component: 3000 - total flux cleaned = -0.000535201 Jy ! Component: 3050 - total flux cleaned = -0.00051848 Jy ! Component: 3100 - total flux cleaned = -0.000469255 Jy ! Component: 3150 - total flux cleaned = -0.000404079 Jy ! Component: 3200 - total flux cleaned = -0.000420312 Jy ! Component: 3250 - total flux cleaned = -0.000404513 Jy ! Component: 3300 - total flux cleaned = -0.000372956 Jy ! Component: 3350 - total flux cleaned = -0.000420398 Jy ! Component: 3400 - total flux cleaned = -0.000420456 Jy ! Component: 3450 - total flux cleaned = -0.000373912 Jy ! Component: 3500 - total flux cleaned = -0.000374187 Jy ! Component: 3550 - total flux cleaned = -0.000404913 Jy ! Component: 3600 - total flux cleaned = -0.000420152 Jy ! Component: 3650 - total flux cleaned = -0.000419985 Jy ! Component: 3700 - total flux cleaned = -0.000389888 Jy ! Component: 3750 - total flux cleaned = -0.000330171 Jy ! Component: 3800 - total flux cleaned = -0.000315391 Jy ! Component: 3850 - total flux cleaned = -0.000256471 Jy ! Component: 3900 - total flux cleaned = -0.000168964 Jy ! Component: 3950 - total flux cleaned = -0.000197972 Jy ! Component: 4000 - total flux cleaned = -0.000125874 Jy ! Component: 4050 - total flux cleaned = -0.000140195 Jy ! Total flux subtracted in 4096 components = -0.000125932 Jy ! Clean residual min=-0.000869 max=0.000922 Jy/beam ! Clean residual mean=0.000001 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.182542 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 379 components and 0.182542 Jy ![Exited script file: muppet] wmap "J1213-1003_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 8.392 at -5.818 degrees (North through East) ! Clean map min=-0.0019965 max=0.081124 Jy/beam ! Writing clean map to FITS file: J1213-1003_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0811239 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000245643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.908399 0.908399 1.8168 3.6336 7.26719 14.5344 29.0688 58.1376 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3 x 8.392 at -5.818 degrees (North through East) ! Clean map min=-0.0019965 max=0.081124 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1213-1003_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:48:19 2019