! Started logfile: J1213+1307_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:40:56 2019 obs J1213+1307_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1213+1307_S_2017_03_27_pus_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.846336 visibilities/baseline/integration-bin. ! Found source: J1213+1307 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 21480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1213+1307_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 494 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.887199Jy sigma=0.007759 ! Fit after self-cal, rms=0.877780Jy sigma=0.007690 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=6.517 mas, bpa=-1.355 degrees ! Estimated noise=873.027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960634 Jy ! Component: 100 - total flux cleaned = 0.119131 Jy ! Total flux subtracted in 100 components = 0.119131 Jy ! Clean residual min=-0.006049 max=0.009004 Jy/beam ! Clean residual mean=-0.000044 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 0.119131 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.119131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101379Jy sigma=0.000800 ! Fit after self-cal, rms=0.101374Jy sigma=0.000799 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=7.371 mas, bpa=0.04807 degrees ! Estimated noise=605.076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133823 Jy ! Component: 100 - total flux cleaned = 0.0207894 Jy ! Component: 150 - total flux cleaned = 0.0257589 Jy ! Component: 200 - total flux cleaned = 0.0291942 Jy ! Total flux subtracted in 200 components = 0.0291942 Jy ! Clean residual min=-0.006793 max=0.009092 Jy/beam ! Clean residual mean=-0.000062 rms=0.002467 Jy/beam ! Combined flux in latest and established models = 0.148325 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 51 components and 0.148325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099421Jy sigma=0.000782 ! Fit after self-cal, rms=0.099438Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.96 KP 1.12 ! LA 1.00 MK 1.01 NL 1.01 OV 1.07 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 0.99 KP 1.06 ! LA 0.91 MK 1.04 NL 1.10 OV 1.13 ! PT 0.85 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.02 KP 1.01 ! LA 0.86 MK 1.07 NL 1.09 OV 1.08 ! PT 0.76 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.24 HN 1.07 KP 1.00* ! LA 0.69 MK 1.33 NL 1.00* OV 1.14 ! PT 0.74 SC 1.33 ! ! ! Fit before self-cal, rms=0.099438Jy sigma=0.000782 ! Fit after self-cal, rms=0.104038Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=7.507 mas, bpa=0.2188 degrees ! Estimated noise=608.227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.18211e-05 Jy ! Component: 100 - total flux cleaned = -0.000237673 Jy ! Component: 150 - total flux cleaned = -0.000340369 Jy ! Component: 200 - total flux cleaned = -0.000459214 Jy ! Total flux subtracted in 200 components = -0.000459214 Jy ! Clean residual min=-0.006607 max=0.009666 Jy/beam ! Clean residual mean=-0.000017 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.147866 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.147866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103979Jy sigma=0.000764 ! Fit after self-cal, rms=0.104555Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104555Jy sigma=0.000762 ! Fit after self-cal, rms=0.108852Jy sigma=0.000747 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=7.561 mas, bpa=0.3427 degrees ! Estimated noise=613.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.26421e-05 Jy ! Component: 100 - total flux cleaned = -0.000365054 Jy ! Component: 150 - total flux cleaned = -0.000655927 Jy ! Component: 200 - total flux cleaned = -0.000906119 Jy ! Total flux subtracted in 200 components = -0.000906119 Jy ! Clean residual min=-0.006418 max=0.010266 Jy/beam ! Clean residual mean=-0.000022 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.14696 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.14696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108778Jy sigma=0.000747 ! Fit after self-cal, rms=0.108909Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0094198 Jy ! Component: 100 - total flux cleaned = 0.0145847 Jy ! Component: 150 - total flux cleaned = 0.0178453 Jy ! Component: 200 - total flux cleaned = 0.0201912 Jy ! Total flux subtracted in 200 components = 0.0201912 Jy ! Clean residual min=-0.005658 max=0.007828 Jy/beam ! Clean residual mean=-0.000017 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.167151 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 88 components and 0.167151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108140Jy sigma=0.000735 ! Fit after self-cal, rms=0.107980Jy sigma=0.000735 ! Inverting map ! Added new window around map position (-41.5, 45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824707 Jy ! Component: 100 - total flux cleaned = 0.0134838 Jy ! Component: 150 - total flux cleaned = 0.017284 Jy ! Component: 200 - total flux cleaned = 0.0203323 Jy ! Total flux subtracted in 200 components = 0.0203323 Jy ! Clean residual min=-0.005226 max=0.006395 Jy/beam ! Clean residual mean=-0.000005 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.187484 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 136 components and 0.187484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107291Jy sigma=0.000724 ! Fit after self-cal, rms=0.107118Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107118Jy sigma=0.000723 ! Fit after self-cal, rms=0.102728Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.722 mas, bmaj=7.607 mas, bpa=0.104 degrees ! Estimated noise=608.003 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428688 Jy ! Component: 100 - total flux cleaned = 0.00735653 Jy ! Component: 150 - total flux cleaned = 0.00959009 Jy ! Component: 200 - total flux cleaned = 0.0108016 Jy ! Total flux subtracted in 200 components = 0.0108016 Jy ! Clean residual min=-0.004778 max=0.006046 Jy/beam ! Clean residual mean=0.000015 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.198285 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 167 components and 0.198285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102502Jy sigma=0.000717 ! Fit after self-cal, rms=0.102408Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210718 Jy ! Component: 100 - total flux cleaned = 0.00298578 Jy ! Component: 150 - total flux cleaned = 0.00384276 Jy ! Component: 200 - total flux cleaned = 0.00467965 Jy ! Total flux subtracted in 200 components = 0.00467965 Jy ! Clean residual min=-0.004741 max=0.005994 Jy/beam ! Clean residual mean=0.000016 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.202965 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 179 components and 0.202965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102318Jy sigma=0.000715 ! Fit after self-cal, rms=0.102294Jy sigma=0.000715 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102294Jy sigma=0.000715 ! Fit after self-cal, rms=0.100804Jy sigma=0.000715 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.616 mas, bmaj=10.98 mas, bpa=-0.5621 degrees ! Estimated noise=707.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474052 Jy ! Component: 100 - total flux cleaned = 0.00789686 Jy ! Component: 150 - total flux cleaned = 0.00973064 Jy ! Component: 200 - total flux cleaned = 0.0105166 Jy ! Total flux subtracted in 200 components = 0.0105166 Jy ! Clean residual min=-0.006821 max=0.008869 Jy/beam ! Clean residual mean=0.000051 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.213482 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 190 components and 0.213482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100775Jy sigma=0.000713 ! Fit after self-cal, rms=0.100730Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159473 Jy ! Component: 100 - total flux cleaned = 0.00235348 Jy ! Component: 150 - total flux cleaned = 0.00289361 Jy ! Component: 200 - total flux cleaned = 0.0034336 Jy ! Total flux subtracted in 200 components = 0.0034336 Jy ! Clean residual min=-0.006831 max=0.008873 Jy/beam ! Clean residual mean=0.000054 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.216915 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 202 components and 0.216915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100725Jy sigma=0.000713 ! Fit after self-cal, rms=0.100721Jy sigma=0.000713 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=7.608 mas, bpa=-0.05984 degrees ! Estimated noise=607.101 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 7.608 at -0.05984 degrees (North through East) ! Clean map min=-0.0048934 max=0.1248 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=6.696 mas, bpa=-1.211 degrees ! Estimated noise=898.987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0981096 Jy ! Component: 100 - total flux cleaned = 0.12175 Jy ! Component: 150 - total flux cleaned = 0.134001 Jy ! Component: 200 - total flux cleaned = 0.14306 Jy ! Total flux subtracted in 200 components = 0.14306 Jy ! Clean residual min=-0.006110 max=0.007627 Jy/beam ! Clean residual mean=-0.000017 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.14306 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.14306 Jy ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=7.608 mas, bpa=-0.05984 degrees ! Estimated noise=607.101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100602 Jy ! Component: 100 - total flux cleaned = 0.017535 Jy ! Component: 150 - total flux cleaned = 0.0238442 Jy ! Component: 200 - total flux cleaned = 0.0292576 Jy ! Total flux subtracted in 200 components = 0.0292576 Jy ! Clean residual min=-0.005886 max=0.006616 Jy/beam ! Clean residual mean=-0.000009 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 0.172317 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 69 components and 0.172317 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.616 mas, bmaj=10.98 mas, bpa=-0.5621 degrees ! Estimated noise=707.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852323 Jy ! Component: 100 - total flux cleaned = 0.0149597 Jy ! Component: 150 - total flux cleaned = 0.0202312 Jy ! Component: 200 - total flux cleaned = 0.0246164 Jy ! Total flux subtracted in 200 components = 0.0246164 Jy ! Clean residual min=-0.007583 max=0.009190 Jy/beam ! Clean residual mean=0.000017 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 0.196934 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366997 Jy ! Component: 100 - total flux cleaned = 0.00675271 Jy ! Component: 150 - total flux cleaned = 0.00934753 Jy ! Component: 200 - total flux cleaned = 0.011298 Jy ! Total flux subtracted in 200 components = 0.011298 Jy ! Clean residual min=-0.007088 max=0.008953 Jy/beam ! Clean residual mean=0.000035 rms=0.002329 Jy/beam ! Combined flux in latest and established models = 0.208232 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 134 components and 0.208232 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=7.608 mas, bpa=-0.05984 degrees ! Estimated noise=607.101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522224 Jy ! Component: 100 - total flux cleaned = 0.000113742 Jy ! Component: 150 - total flux cleaned = 0.0006579 Jy ! Component: 200 - total flux cleaned = 0.00128507 Jy ! Total flux subtracted in 200 components = 0.00128507 Jy ! Clean residual min=-0.005178 max=0.005887 Jy/beam ! Clean residual mean=0.000018 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.209517 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 155 components and 0.209517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100760Jy sigma=0.000714 ! Fit after self-cal, rms=0.100719Jy sigma=0.000714 wmodel J1213+1307_S_2017_03_27_pus_map.mod ! Writing 155 model components to file: J1213+1307_S_2017_03_27_pus_map.mod wobs J1213+1307_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1213+1307_S_2017_03_27_pus_uvs.fits wwins J1213+1307_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1213+1307_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246646 Jy ! Component: 100 - total flux cleaned = 0.00349715 Jy ! Component: 150 - total flux cleaned = 0.004199 Jy ! Component: 200 - total flux cleaned = 0.00510832 Jy ! Component: 250 - total flux cleaned = 0.00581572 Jy ! Component: 300 - total flux cleaned = 0.00634195 Jy ! Component: 350 - total flux cleaned = 0.00684814 Jy ! Component: 400 - total flux cleaned = 0.0072685 Jy ! Component: 450 - total flux cleaned = 0.00767625 Jy ! Component: 500 - total flux cleaned = 0.00813823 Jy ! Component: 550 - total flux cleaned = 0.00858739 Jy ! Component: 600 - total flux cleaned = 0.00914788 Jy ! Component: 650 - total flux cleaned = 0.00945153 Jy ! Component: 700 - total flux cleaned = 0.00980848 Jy ! Component: 750 - total flux cleaned = 0.0104438 Jy ! Component: 800 - total flux cleaned = 0.0107254 Jy ! Component: 850 - total flux cleaned = 0.0111679 Jy ! Component: 900 - total flux cleaned = 0.0116003 Jy ! Component: 950 - total flux cleaned = 0.0119178 Jy ! Component: 1000 - total flux cleaned = 0.0122294 Jy ! Component: 1050 - total flux cleaned = 0.0125351 Jy ! Component: 1100 - total flux cleaned = 0.0129341 Jy ! Component: 1150 - total flux cleaned = 0.0131781 Jy ! Component: 1200 - total flux cleaned = 0.0134192 Jy ! Component: 1250 - total flux cleaned = 0.0137503 Jy ! Component: 1300 - total flux cleaned = 0.0139819 Jy ! Component: 1350 - total flux cleaned = 0.0142094 Jy ! Component: 1400 - total flux cleaned = 0.0146122 Jy ! Component: 1450 - total flux cleaned = 0.0147888 Jy ! Component: 1500 - total flux cleaned = 0.0151782 Jy ! Component: 1550 - total flux cleaned = 0.0153067 Jy ! Component: 1600 - total flux cleaned = 0.0155998 Jy ! Component: 1650 - total flux cleaned = 0.015806 Jy ! Component: 1700 - total flux cleaned = 0.0160498 Jy ! Component: 1750 - total flux cleaned = 0.0162894 Jy ! Component: 1800 - total flux cleaned = 0.0165247 Jy ! Component: 1850 - total flux cleaned = 0.0167191 Jy ! Component: 1900 - total flux cleaned = 0.0169865 Jy ! Component: 1950 - total flux cleaned = 0.0171749 Jy ! Component: 2000 - total flux cleaned = 0.017436 Jy ! Component: 2050 - total flux cleaned = 0.0176926 Jy ! Component: 2100 - total flux cleaned = 0.0178373 Jy ! Component: 2150 - total flux cleaned = 0.0181229 Jy ! Component: 2200 - total flux cleaned = 0.0182283 Jy ! Component: 2250 - total flux cleaned = 0.0183329 Jy ! Component: 2300 - total flux cleaned = 0.018505 Jy ! Component: 2350 - total flux cleaned = 0.0185726 Jy ! Component: 2400 - total flux cleaned = 0.0186735 Jy ! Component: 2450 - total flux cleaned = 0.0187729 Jy ! Component: 2500 - total flux cleaned = 0.0190022 Jy ! Component: 2550 - total flux cleaned = 0.0190346 Jy ! Component: 2600 - total flux cleaned = 0.0192274 Jy ! Component: 2650 - total flux cleaned = 0.0192283 Jy ! Component: 2700 - total flux cleaned = 0.0193226 Jy ! Component: 2750 - total flux cleaned = 0.0194157 Jy ! Component: 2800 - total flux cleaned = 0.0196002 Jy ! Component: 2850 - total flux cleaned = 0.0196307 Jy ! Component: 2900 - total flux cleaned = 0.0197821 Jy ! Component: 2950 - total flux cleaned = 0.019902 Jy ! Component: 3000 - total flux cleaned = 0.0200501 Jy ! Component: 3050 - total flux cleaned = 0.0202549 Jy ! Component: 3100 - total flux cleaned = 0.0203418 Jy ! Component: 3150 - total flux cleaned = 0.020428 Jy ! Component: 3200 - total flux cleaned = 0.020542 Jy ! Component: 3250 - total flux cleaned = 0.020655 Jy ! Component: 3300 - total flux cleaned = 0.0207389 Jy ! Component: 3350 - total flux cleaned = 0.0208775 Jy ! Component: 3400 - total flux cleaned = 0.021015 Jy ! Component: 3450 - total flux cleaned = 0.0211781 Jy ! Component: 3500 - total flux cleaned = 0.0213668 Jy ! Component: 3550 - total flux cleaned = 0.021447 Jy ! Component: 3600 - total flux cleaned = 0.02158 Jy ! Component: 3650 - total flux cleaned = 0.0216853 Jy ! Component: 3700 - total flux cleaned = 0.0218679 Jy ! Component: 3750 - total flux cleaned = 0.022023 Jy ! Component: 3800 - total flux cleaned = 0.0221258 Jy ! Component: 3850 - total flux cleaned = 0.0224319 Jy ! Component: 3900 - total flux cleaned = 0.0224569 Jy ! Component: 3950 - total flux cleaned = 0.0225574 Jy ! Component: 4000 - total flux cleaned = 0.0226822 Jy ! Component: 4050 - total flux cleaned = 0.022781 Jy ! Total flux subtracted in 4096 components = 0.0229039 Jy ! Clean residual min=-0.001823 max=0.001378 Jy/beam ! Clean residual mean=0.000005 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.232421 Jy keep ! Adding 398 model components to the UV plane model. ! The established model now contains 553 components and 0.232421 Jy ![Exited script file: muppet] wmap "J1213+1307_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 7.608 at -0.05984 degrees (North through East) ! Clean map min=-0.0030956 max=0.12625 Jy/beam ! Writing clean map to FITS file: J1213+1307_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126255 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00050668 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20394 1.20394 2.40789 4.81578 9.63155 19.2631 38.5262 77.0524 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 7.608 at -0.05984 degrees (North through East) ! Clean map min=-0.0030956 max=0.12625 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1213+1307_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:41:01 2019