! Started logfile: J1212-2221_X_2017_03_23_pus_uvs.log on Mon May 13 10:23:48 2019 obs J1212-2221_X_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1212-2221_X_2017_03_23_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785185 visibilities/baseline/integration-bin. ! Found source: J1212-2221 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1124 lines of history. ! ! Reading 31800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1212-2221_X_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.913612Jy sigma=0.007019 ! Fit after self-cal, rms=0.895039Jy sigma=0.006906 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7629 mas, bmaj=1.739 mas, bpa=-3.708 degrees ! Estimated noise=1000.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0851796 Jy ! Component: 100 - total flux cleaned = 0.105443 Jy ! Total flux subtracted in 100 components = 0.105443 Jy ! Clean residual min=-0.003638 max=0.007759 Jy/beam ! Clean residual mean=-0.000034 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.105443 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.105443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095771Jy sigma=0.000653 ! Fit after self-cal, rms=0.095761Jy sigma=0.000653 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822149 Jy ! Component: 100 - total flux cleaned = 0.0119932 Jy ! Total flux subtracted in 100 components = 0.0119932 Jy ! Clean residual min=-0.002589 max=0.003015 Jy/beam ! Clean residual mean=-0.000016 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.117436 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 7 components and 0.117436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095198Jy sigma=0.000648 ! Fit after self-cal, rms=0.095221Jy sigma=0.000648 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9381 mas, bmaj=2.197 mas, bpa=-3.054 degrees ! Estimated noise=529.424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010667 Jy ! Component: 100 - total flux cleaned = 0.001146 Jy ! Component: 150 - total flux cleaned = 0.00121386 Jy ! Component: 200 - total flux cleaned = 0.00126992 Jy ! Total flux subtracted in 200 components = 0.00126992 Jy ! Clean residual min=-0.001921 max=0.002889 Jy/beam ! Clean residual mean=-0.000025 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.118706 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.118706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095191Jy sigma=0.000647 ! Fit after self-cal, rms=0.095189Jy sigma=0.000647 ! Inverting map ! Added new window around map position (1.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278916 Jy ! Component: 100 - total flux cleaned = 0.00388712 Jy ! Component: 150 - total flux cleaned = 0.00400578 Jy ! Component: 200 - total flux cleaned = 0.00410888 Jy ! Total flux subtracted in 200 components = 0.00410888 Jy ! Clean residual min=-0.001504 max=0.001657 Jy/beam ! Clean residual mean=-0.000018 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.122815 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.122815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095106Jy sigma=0.000647 ! Fit after self-cal, rms=0.095103Jy sigma=0.000646 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 1.03 ! LA 0.99 MK 0.97 NL 1.00 OV 1.00 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.07 KP 1.05 ! LA 1.00 MK 0.99 NL 0.96 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 1.11 KP 0.99 ! LA 0.97 MK 0.92 NL 1.00 OV 1.01 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.03 KP 1.01 ! LA 1.01 MK 0.99 NL 0.97 OV 1.02 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 0.99 ! LA 0.98 MK 0.99 NL 0.99 OV 1.00 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.98 KP 0.99 ! LA 1.01 MK 1.02 NL 0.95 OV 0.99 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 1.03 KP 0.98 ! LA 1.02 MK 0.97 NL 1.01 OV 1.00 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 0.96 KP 1.00 ! LA 1.00 MK 0.96 NL 0.98 OV 0.96 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.97 KP 1.00 ! LA 1.04 MK 1.00 NL 1.01 OV 1.02 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.03 KP 1.03 ! LA 1.03 MK 0.95 NL 1.01 OV 1.01 ! PT 1.07 SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.01 KP 0.97 ! LA 1.02 MK 0.97 NL 1.02 OV 0.97 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.97 KP 1.02 ! LA 1.02 MK 0.95 NL 1.01 OV 1.02 ! PT 1.00 SC 0.95 ! ! ! Fit before self-cal, rms=0.095103Jy sigma=0.000646 ! Fit after self-cal, rms=0.094471Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9342 mas, bmaj=2.182 mas, bpa=-3.209 degrees ! Estimated noise=526.913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110896 Jy ! Component: 100 - total flux cleaned = 0.00127288 Jy ! Component: 150 - total flux cleaned = 0.00125242 Jy ! Component: 200 - total flux cleaned = 0.00123368 Jy ! Total flux subtracted in 200 components = 0.00123368 Jy ! Clean residual min=-0.001388 max=0.001442 Jy/beam ! Clean residual mean=-0.000013 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.124048 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 44 components and 0.124048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094453Jy sigma=0.000645 ! Fit after self-cal, rms=0.094459Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094459Jy sigma=0.000645 ! Fit after self-cal, rms=0.094544Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9332 mas, bmaj=2.178 mas, bpa=-3.286 degrees ! Estimated noise=526.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454575 Jy ! Component: 100 - total flux cleaned = 0.000493074 Jy ! Component: 150 - total flux cleaned = 0.000493409 Jy ! Component: 200 - total flux cleaned = 0.000493644 Jy ! Total flux subtracted in 200 components = 0.000493644 Jy ! Clean residual min=-0.001352 max=0.001334 Jy/beam ! Clean residual mean=-0.000010 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.124542 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.124542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094537Jy sigma=0.000645 ! Fit after self-cal, rms=0.094547Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.68309e-05 Jy ! Component: 100 - total flux cleaned = 5.70443e-05 Jy ! Component: 150 - total flux cleaned = 5.65911e-05 Jy ! Component: 200 - total flux cleaned = 5.62029e-05 Jy ! Total flux subtracted in 200 components = 5.62029e-05 Jy ! Clean residual min=-0.001364 max=0.001325 Jy/beam ! Clean residual mean=-0.000010 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.124598 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.124598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094543Jy sigma=0.000645 ! Fit after self-cal, rms=0.094544Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094544Jy sigma=0.000645 ! Fit after self-cal, rms=0.094491Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9326 mas, bmaj=2.177 mas, bpa=-3.284 degrees ! Estimated noise=525.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.37201e-05 Jy ! Component: 100 - total flux cleaned = 4.72756e-05 Jy ! Component: 150 - total flux cleaned = 4.7597e-05 Jy ! Component: 200 - total flux cleaned = 3.65936e-05 Jy ! Total flux subtracted in 200 components = 3.65936e-05 Jy ! Clean residual min=-0.001338 max=0.001279 Jy/beam ! Clean residual mean=-0.000009 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.124635 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 59 components and 0.124635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094488Jy sigma=0.000645 ! Fit after self-cal, rms=0.094493Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12689e-05 Jy ! Component: 100 - total flux cleaned = 1.11017e-05 Jy ! Component: 150 - total flux cleaned = 1.07998e-05 Jy ! Component: 200 - total flux cleaned = 1.48579e-06 Jy ! Total flux subtracted in 200 components = 1.48579e-06 Jy ! Clean residual min=-0.001342 max=0.001291 Jy/beam ! Clean residual mean=-0.000009 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.124636 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 63 components and 0.124636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094491Jy sigma=0.000645 ! Fit after self-cal, rms=0.094492Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094492Jy sigma=0.000645 ! Fit after self-cal, rms=0.094333Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.16 mas, bmaj=4.792 mas, bpa=-0.5051 degrees ! Estimated noise=629.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448251 Jy ! Component: 100 - total flux cleaned = 0.000407992 Jy ! Component: 150 - total flux cleaned = 0.000384136 Jy ! Component: 200 - total flux cleaned = 0.000363395 Jy ! Total flux subtracted in 200 components = 0.000363395 Jy ! Clean residual min=-0.001237 max=0.001684 Jy/beam ! Clean residual mean=-0.000015 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.125 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094332Jy sigma=0.000645 ! Fit after self-cal, rms=0.094333Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811549 Jy ! Component: 100 - total flux cleaned = 0.00122718 Jy ! Component: 150 - total flux cleaned = 0.00140329 Jy ! Component: 200 - total flux cleaned = 0.00152788 Jy ! Total flux subtracted in 200 components = 0.00152788 Jy ! Clean residual min=-0.001017 max=0.000837 Jy/beam ! Clean residual mean=-0.000009 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.126528 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 113 components and 0.126528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094318Jy sigma=0.000644 ! Fit after self-cal, rms=0.094316Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9325 mas, bmaj=2.177 mas, bpa=-3.264 degrees ! Estimated noise=525.085 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9325 x 2.177 at -3.264 degrees (North through East) ! Clean map min=-0.0015843 max=0.10837 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7586 mas, bmaj=1.726 mas, bpa=-3.87 degrees ! Estimated noise=989.423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840907 Jy ! Component: 100 - total flux cleaned = 0.104738 Jy ! Component: 150 - total flux cleaned = 0.112903 Jy ! Component: 200 - total flux cleaned = 0.11707 Jy ! Total flux subtracted in 200 components = 0.11707 Jy ! Clean residual min=-0.002234 max=0.002432 Jy/beam ! Clean residual mean=-0.000014 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.11707 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.11707 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9325 mas, bmaj=2.177 mas, bpa=-3.264 degrees ! Estimated noise=525.085 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296239 Jy ! Component: 100 - total flux cleaned = 0.00484873 Jy ! Component: 150 - total flux cleaned = 0.00589668 Jy ! Component: 200 - total flux cleaned = 0.00649269 Jy ! Total flux subtracted in 200 components = 0.00649269 Jy ! Clean residual min=-0.001394 max=0.001111 Jy/beam ! Clean residual mean=-0.000012 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.123562 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.123562 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.16 mas, bmaj=4.792 mas, bpa=-0.5051 degrees ! Estimated noise=629.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125948 Jy ! Component: 100 - total flux cleaned = 0.00180741 Jy ! Component: 150 - total flux cleaned = 0.00219032 Jy ! Component: 200 - total flux cleaned = 0.00241306 Jy ! Total flux subtracted in 200 components = 0.00241306 Jy ! Clean residual min=-0.001200 max=0.000945 Jy/beam ! Clean residual mean=-0.000014 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.125976 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222137 Jy ! Component: 100 - total flux cleaned = 0.000375366 Jy ! Component: 150 - total flux cleaned = 0.000493255 Jy ! Component: 200 - total flux cleaned = 0.000546864 Jy ! Total flux subtracted in 200 components = 0.000546864 Jy ! Clean residual min=-0.001094 max=0.000911 Jy/beam ! Clean residual mean=-0.000010 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.126522 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 109 components and 0.126522 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9325 mas, bmaj=2.177 mas, bpa=-3.264 degrees ! Estimated noise=525.085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106449 Jy ! Component: 100 - total flux cleaned = -1.85294e-05 Jy ! Component: 150 - total flux cleaned = 8.82957e-05 Jy ! Component: 200 - total flux cleaned = 0.000209504 Jy ! Total flux subtracted in 200 components = 0.000209504 Jy ! Clean residual min=-0.001034 max=0.000982 Jy/beam ! Clean residual mean=-0.000003 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.126732 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 130 components and 0.126732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094308Jy sigma=0.000644 ! Fit after self-cal, rms=0.094306Jy sigma=0.000644 wmodel J1212-2221_X_2017_03_23_pus_map.mod ! Writing 130 model components to file: J1212-2221_X_2017_03_23_pus_map.mod wobs J1212-2221_X_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1212-2221_X_2017_03_23_pus_uvs.fits wwins J1212-2221_X_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J1212-2221_X_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000347859 Jy ! Component: 100 - total flux cleaned = -0.000536631 Jy ! Component: 150 - total flux cleaned = -0.000632657 Jy ! Component: 200 - total flux cleaned = -0.000663359 Jy ! Component: 250 - total flux cleaned = -0.000707627 Jy ! Component: 300 - total flux cleaned = -0.000792217 Jy ! Component: 350 - total flux cleaned = -0.000820095 Jy ! Component: 400 - total flux cleaned = -0.000860446 Jy ! Component: 450 - total flux cleaned = -0.000899985 Jy ! Component: 500 - total flux cleaned = -0.000951749 Jy ! Component: 550 - total flux cleaned = -0.0010279 Jy ! Component: 600 - total flux cleaned = -0.00102776 Jy ! Component: 650 - total flux cleaned = -0.00108899 Jy ! Component: 700 - total flux cleaned = -0.00110103 Jy ! Component: 750 - total flux cleaned = -0.00114897 Jy ! Component: 800 - total flux cleaned = -0.0012196 Jy ! Component: 850 - total flux cleaned = -0.00126588 Jy ! Component: 900 - total flux cleaned = -0.00128861 Jy ! Component: 950 - total flux cleaned = -0.00131122 Jy ! Component: 1000 - total flux cleaned = -0.00133377 Jy ! Component: 1050 - total flux cleaned = -0.00140021 Jy ! Component: 1100 - total flux cleaned = -0.00144381 Jy ! Component: 1150 - total flux cleaned = -0.00144384 Jy ! Component: 1200 - total flux cleaned = -0.00146531 Jy ! Component: 1250 - total flux cleaned = -0.00145471 Jy ! Component: 1300 - total flux cleaned = -0.00147585 Jy ! Component: 1350 - total flux cleaned = -0.00145528 Jy ! Component: 1400 - total flux cleaned = -0.00146551 Jy ! Component: 1450 - total flux cleaned = -0.00147566 Jy ! Component: 1500 - total flux cleaned = -0.00150579 Jy ! Component: 1550 - total flux cleaned = -0.00151566 Jy ! Component: 1600 - total flux cleaned = -0.00152554 Jy ! Component: 1650 - total flux cleaned = -0.00155488 Jy ! Component: 1700 - total flux cleaned = -0.00156464 Jy ! Component: 1750 - total flux cleaned = -0.00157416 Jy ! Component: 1800 - total flux cleaned = -0.00158373 Jy ! Component: 1850 - total flux cleaned = -0.0016027 Jy ! Component: 1900 - total flux cleaned = -0.00164929 Jy ! Component: 1950 - total flux cleaned = -0.00163083 Jy ! Component: 2000 - total flux cleaned = -0.00164926 Jy ! Total flux subtracted in 2048 components = -0.00168567 Jy ! Clean residual min=-0.000557 max=0.000462 Jy/beam ! Clean residual mean=-0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.125046 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 252 components and 0.125046 Jy ![Exited script file: muppet] wmap "J1212-2221_X_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9325 x 2.177 at -3.264 degrees (North through East) ! Clean map min=-0.00085442 max=0.10732 Jy/beam ! Writing clean map to FITS file: J1212-2221_X_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107324 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164229 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.459064 0.459064 0.918129 1.83626 3.67251 7.34503 14.6901 29.3801 58.7602 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9325 x 2.177 at -3.264 degrees (North through East) ! Clean map min=-0.00085442 max=0.10732 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1212-2221_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:23:51 2019