! Started logfile: J1211-1926_S_2017_06_15_pus_uvs.log on Tue May 7 15:18:07 2019 obs J1211-1926_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1211-1926_S_2017_06_15_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980483 visibilities/baseline/integration-bin. ! Found source: J1211-1926 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 20296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1211-1926_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 713 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.890487Jy sigma=0.006590 ! Fit after self-cal, rms=0.856946Jy sigma=0.006328 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=6.607 mas, bpa=-6.765 degrees ! Estimated noise=1210.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104719 Jy ! Component: 100 - total flux cleaned = 0.145813 Jy ! Total flux subtracted in 100 components = 0.145813 Jy ! Clean residual min=-0.018414 max=0.031652 Jy/beam ! Clean residual mean=-0.000042 rms=0.006028 Jy/beam ! Combined flux in latest and established models = 0.145813 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.145813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157186Jy sigma=0.001189 ! Fit after self-cal, rms=0.156899Jy sigma=0.001188 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=7.751 mas, bpa=-3.497 degrees ! Estimated noise=770.917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493519 Jy ! Component: 100 - total flux cleaned = 0.074859 Jy ! Component: 150 - total flux cleaned = 0.0888766 Jy ! Component: 200 - total flux cleaned = 0.0969486 Jy ! Total flux subtracted in 200 components = 0.0969486 Jy ! Clean residual min=-0.020439 max=0.040898 Jy/beam ! Clean residual mean=0.000013 rms=0.007867 Jy/beam ! Combined flux in latest and established models = 0.242761 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.242761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144414Jy sigma=0.001054 ! Fit after self-cal, rms=0.144124Jy sigma=0.001052 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.76 HN 1.47 KP 0.90 ! LA 0.84 MK 1.13 NL 1.90 OV 1.27 ! PT 0.76 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.75 FD 0.78 HN 1.45 KP 0.90 ! LA 0.81 MK 0.93 NL 1.67 OV 1.45 ! PT 0.72 SC 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.83 HN 1.51 KP 0.88 ! LA 0.81 MK 0.95 NL 1.65 OV 1.29 ! PT 0.73 SC 0.85 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 1.55 KP 1.00* ! LA 0.95 MK 0.82 NL 1.00* OV 1.00* ! PT 0.82 SC 1.00* ! ! ! Fit before self-cal, rms=0.144124Jy sigma=0.001052 ! Fit after self-cal, rms=0.176528Jy sigma=0.000913 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=7.694 mas, bpa=-1.227 degrees ! Estimated noise=771.764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028344 Jy ! Component: 100 - total flux cleaned = 0.0308341 Jy ! Component: 150 - total flux cleaned = 0.0294334 Jy ! Component: 200 - total flux cleaned = 0.0282114 Jy ! Total flux subtracted in 200 components = 0.0282114 Jy ! Clean residual min=-0.015740 max=0.020736 Jy/beam ! Clean residual mean=0.000055 rms=0.004362 Jy/beam ! Combined flux in latest and established models = 0.270973 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 77 components and 0.270973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169899Jy sigma=0.000869 ! Fit after self-cal, rms=0.170764Jy sigma=0.000853 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170764Jy sigma=0.000853 ! Fit after self-cal, rms=0.241803Jy sigma=0.000799 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=8.153 mas, bpa=-0.9138 degrees ! Estimated noise=775.512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131264 Jy ! Component: 100 - total flux cleaned = 0.013566 Jy ! Component: 150 - total flux cleaned = 0.012207 Jy ! Component: 200 - total flux cleaned = 0.0112524 Jy ! Total flux subtracted in 200 components = 0.0112524 Jy ! Clean residual min=-0.009692 max=0.015680 Jy/beam ! Clean residual mean=0.000026 rms=0.003153 Jy/beam ! Combined flux in latest and established models = 0.282225 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.282225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239455Jy sigma=0.000786 ! Fit after self-cal, rms=0.238412Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, 92.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140642 Jy ! Component: 100 - total flux cleaned = 0.0206485 Jy ! Component: 150 - total flux cleaned = 0.0216413 Jy ! Component: 200 - total flux cleaned = 0.0218433 Jy ! Total flux subtracted in 200 components = 0.0218433 Jy ! Clean residual min=-0.009585 max=0.012313 Jy/beam ! Clean residual mean=0.000026 rms=0.002955 Jy/beam ! Combined flux in latest and established models = 0.304068 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 115 components and 0.304068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236270Jy sigma=0.000771 ! Fit after self-cal, rms=0.235207Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235207Jy sigma=0.000768 ! Fit after self-cal, rms=0.197539Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=8.291 mas, bpa=-0.4952 degrees ! Estimated noise=770.227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697204 Jy ! Component: 100 - total flux cleaned = 0.00699982 Jy ! Component: 150 - total flux cleaned = 0.00721556 Jy ! Component: 200 - total flux cleaned = 0.00703296 Jy ! Total flux subtracted in 200 components = 0.00703296 Jy ! Clean residual min=-0.008566 max=0.011224 Jy/beam ! Clean residual mean=0.000014 rms=0.002655 Jy/beam ! Combined flux in latest and established models = 0.311101 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 134 components and 0.311101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196340Jy sigma=0.000753 ! Fit after self-cal, rms=0.195383Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390313 Jy ! Component: 100 - total flux cleaned = 0.0035157 Jy ! Component: 150 - total flux cleaned = 0.00334246 Jy ! Component: 200 - total flux cleaned = 0.00350532 Jy ! Total flux subtracted in 200 components = 0.00350532 Jy ! Clean residual min=-0.008703 max=0.010394 Jy/beam ! Clean residual mean=0.000012 rms=0.002499 Jy/beam ! Combined flux in latest and established models = 0.314607 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 149 components and 0.314607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194698Jy sigma=0.000746 ! Fit after self-cal, rms=0.194390Jy sigma=0.000745 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194390Jy sigma=0.000745 ! Fit after self-cal, rms=0.181959Jy sigma=0.000742 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.438 mas, bmaj=16.45 mas, bpa=2.698 degrees ! Estimated noise=903.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411032 Jy ! Component: 100 - total flux cleaned = 0.00320268 Jy ! Component: 150 - total flux cleaned = 0.00290435 Jy ! Component: 200 - total flux cleaned = 0.00249777 Jy ! Total flux subtracted in 200 components = 0.00249777 Jy ! Clean residual min=-0.009211 max=0.009914 Jy/beam ! Clean residual mean=0.000017 rms=0.003053 Jy/beam ! Combined flux in latest and established models = 0.317105 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 169 components and 0.317105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181505Jy sigma=0.000741 ! Fit after self-cal, rms=0.181009Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147644 Jy ! Component: 100 - total flux cleaned = 0.000727663 Jy ! Component: 150 - total flux cleaned = 7.97962e-05 Jy ! Component: 200 - total flux cleaned = -0.000275394 Jy ! Total flux subtracted in 200 components = -0.000275394 Jy ! Clean residual min=-0.008765 max=0.009002 Jy/beam ! Clean residual mean=0.000017 rms=0.002842 Jy/beam ! Combined flux in latest and established models = 0.316829 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 184 components and 0.316829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180759Jy sigma=0.000739 ! Fit after self-cal, rms=0.180565Jy sigma=0.000738 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=8.392 mas, bpa=-0.3351 degrees ! Estimated noise=762.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 8.392 at -0.3351 degrees (North through East) ! Clean map min=-0.012932 max=0.13076 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.05 mas, bpa=-3.181 degrees ! Estimated noise=1269.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104703 Jy ! Component: 100 - total flux cleaned = 0.163564 Jy ! Component: 150 - total flux cleaned = 0.2043 Jy ! Component: 200 - total flux cleaned = 0.23417 Jy ! Total flux subtracted in 200 components = 0.23417 Jy ! Clean residual min=-0.014504 max=0.021343 Jy/beam ! Clean residual mean=-0.000034 rms=0.003821 Jy/beam ! Combined flux in latest and established models = 0.23417 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.23417 Jy ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=8.392 mas, bpa=-0.3351 degrees ! Estimated noise=762.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327304 Jy ! Component: 100 - total flux cleaned = 0.0525388 Jy ! Component: 150 - total flux cleaned = 0.0592309 Jy ! Component: 200 - total flux cleaned = 0.0647502 Jy ! Total flux subtracted in 200 components = 0.0647502 Jy ! Clean residual min=-0.010382 max=0.010764 Jy/beam ! Clean residual mean=-0.000012 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 0.29892 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 81 components and 0.29892 Jy ! Inverting map ! Added new window around map position (1.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669887 Jy ! Component: 100 - total flux cleaned = 0.00958136 Jy ! Component: 150 - total flux cleaned = 0.0129635 Jy ! Component: 200 - total flux cleaned = 0.0153231 Jy ! Total flux subtracted in 200 components = 0.0153231 Jy ! Clean residual min=-0.008179 max=0.008196 Jy/beam ! Clean residual mean=0.000002 rms=0.002093 Jy/beam ! Combined flux in latest and established models = 0.314243 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 103 components and 0.314243 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.438 mas, bmaj=16.45 mas, bpa=2.698 degrees ! Estimated noise=903.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320579 Jy ! Component: 100 - total flux cleaned = 0.0045561 Jy ! Component: 150 - total flux cleaned = 0.00568849 Jy ! Component: 200 - total flux cleaned = 0.006113 Jy ! Total flux subtracted in 200 components = 0.006113 Jy ! Clean residual min=-0.007858 max=0.009454 Jy/beam ! Clean residual mean=0.000017 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 0.320356 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.26052e-06 Jy ! Component: 100 - total flux cleaned = -0.000100955 Jy ! Component: 150 - total flux cleaned = -0.000100965 Jy ! Component: 200 - total flux cleaned = -0.000202651 Jy ! Total flux subtracted in 200 components = -0.000202651 Jy ! Clean residual min=-0.007943 max=0.009118 Jy/beam ! Clean residual mean=0.000022 rms=0.002685 Jy/beam ! Combined flux in latest and established models = 0.320153 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 141 components and 0.320153 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=8.392 mas, bpa=-0.3351 degrees ! Estimated noise=762.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203259 Jy ! Component: 100 - total flux cleaned = -0.000123019 Jy ! Component: 150 - total flux cleaned = -0.000430072 Jy ! Component: 200 - total flux cleaned = -0.000571791 Jy ! Total flux subtracted in 200 components = -0.000571791 Jy ! Clean residual min=-0.006890 max=0.007971 Jy/beam ! Clean residual mean=0.000009 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.319582 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 165 components and 0.319582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179309Jy sigma=0.000724 ! Fit after self-cal, rms=0.178631Jy sigma=0.000721 wmodel J1211-1926_S_2017_06_15_pus_map.mod ! Writing 165 model components to file: J1211-1926_S_2017_06_15_pus_map.mod wobs J1211-1926_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1211-1926_S_2017_06_15_pus_uvs.fits wwins J1211-1926_S_2017_06_15_pus_map.win ! wwins: Wrote 5 windows to J1211-1926_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105805 Jy ! Component: 100 - total flux cleaned = 0.00201081 Jy ! Component: 150 - total flux cleaned = 0.00290834 Jy ! Component: 200 - total flux cleaned = 0.00333268 Jy ! Component: 250 - total flux cleaned = 0.00384095 Jy ! Component: 300 - total flux cleaned = 0.00423341 Jy ! Component: 350 - total flux cleaned = 0.00461186 Jy ! Component: 400 - total flux cleaned = 0.00497977 Jy ! Component: 450 - total flux cleaned = 0.00551516 Jy ! Component: 500 - total flux cleaned = 0.00603703 Jy ! Component: 550 - total flux cleaned = 0.00688333 Jy ! Component: 600 - total flux cleaned = 0.0075429 Jy ! Component: 650 - total flux cleaned = 0.0081087 Jy ! Component: 700 - total flux cleaned = 0.00874037 Jy ! Component: 750 - total flux cleaned = 0.00928024 Jy ! Component: 800 - total flux cleaned = 0.00980805 Jy ! Component: 850 - total flux cleaned = 0.0101032 Jy ! Component: 900 - total flux cleaned = 0.0103209 Jy ! Component: 950 - total flux cleaned = 0.0106771 Jy ! Component: 1000 - total flux cleaned = 0.0111661 Jy ! Component: 1050 - total flux cleaned = 0.0115069 Jy ! Component: 1100 - total flux cleaned = 0.0118419 Jy ! Component: 1150 - total flux cleaned = 0.0121067 Jy ! Component: 1200 - total flux cleaned = 0.0123651 Jy ! Component: 1250 - total flux cleaned = 0.0126845 Jy ! Component: 1300 - total flux cleaned = 0.0130608 Jy ! Component: 1350 - total flux cleaned = 0.0133684 Jy ! Component: 1400 - total flux cleaned = 0.0136114 Jy ! Component: 1450 - total flux cleaned = 0.014031 Jy ! Component: 1500 - total flux cleaned = 0.0142076 Jy ! Component: 1550 - total flux cleaned = 0.0145571 Jy ! Component: 1600 - total flux cleaned = 0.0149012 Jy ! Component: 1650 - total flux cleaned = 0.0151839 Jy ! Component: 1700 - total flux cleaned = 0.0153516 Jy ! Component: 1750 - total flux cleaned = 0.0156279 Jy ! Component: 1800 - total flux cleaned = 0.0159533 Jy ! Component: 1850 - total flux cleaned = 0.0159538 Jy ! Component: 1900 - total flux cleaned = 0.0163233 Jy ! Component: 1950 - total flux cleaned = 0.0164273 Jy ! Component: 2000 - total flux cleaned = 0.016685 Jy ! Component: 2050 - total flux cleaned = 0.0167349 Jy ! Component: 2100 - total flux cleaned = 0.0167349 Jy ! Component: 2150 - total flux cleaned = 0.0168839 Jy ! Component: 2200 - total flux cleaned = 0.0167371 Jy ! Component: 2250 - total flux cleaned = 0.0169805 Jy ! Component: 2300 - total flux cleaned = 0.017076 Jy ! Component: 2350 - total flux cleaned = 0.0171227 Jy ! Component: 2400 - total flux cleaned = 0.0172632 Jy ! Component: 2450 - total flux cleaned = 0.0170768 Jy ! Component: 2500 - total flux cleaned = 0.0171231 Jy ! Component: 2550 - total flux cleaned = 0.0170776 Jy ! Component: 2600 - total flux cleaned = 0.0169879 Jy ! Component: 2650 - total flux cleaned = 0.0169432 Jy ! Component: 2700 - total flux cleaned = 0.0168546 Jy ! Component: 2750 - total flux cleaned = 0.0167673 Jy ! Component: 2800 - total flux cleaned = 0.0166802 Jy ! Component: 2850 - total flux cleaned = 0.0165946 Jy ! Component: 2900 - total flux cleaned = 0.0165523 Jy ! Component: 2950 - total flux cleaned = 0.016552 Jy ! Component: 3000 - total flux cleaned = 0.0164686 Jy ! Component: 3050 - total flux cleaned = 0.0164274 Jy ! Component: 3100 - total flux cleaned = 0.0163867 Jy ! Component: 3150 - total flux cleaned = 0.0163461 Jy ! Component: 3200 - total flux cleaned = 0.0164665 Jy ! Component: 3250 - total flux cleaned = 0.0162277 Jy ! Component: 3300 - total flux cleaned = 0.0161882 Jy ! Component: 3350 - total flux cleaned = 0.0161102 Jy ! Component: 3400 - total flux cleaned = 0.0161491 Jy ! Component: 3450 - total flux cleaned = 0.0161107 Jy ! Component: 3500 - total flux cleaned = 0.0159207 Jy ! Component: 3550 - total flux cleaned = 0.0159207 Jy ! Component: 3600 - total flux cleaned = 0.0158829 Jy ! Component: 3650 - total flux cleaned = 0.0157718 Jy ! Component: 3700 - total flux cleaned = 0.0155514 Jy ! Component: 3750 - total flux cleaned = 0.0155885 Jy ! Component: 3800 - total flux cleaned = 0.0155521 Jy ! Component: 3850 - total flux cleaned = 0.0155523 Jy ! Component: 3900 - total flux cleaned = 0.0155167 Jy ! Component: 3950 - total flux cleaned = 0.0154107 Jy ! Component: 4000 - total flux cleaned = 0.0152704 Jy ! Component: 4050 - total flux cleaned = 0.015236 Jy ! Total flux subtracted in 4096 components = 0.0150978 Jy ! Clean residual min=-0.001873 max=0.002027 Jy/beam ! Clean residual mean=0.000007 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.334679 Jy keep ! Adding 353 model components to the UV plane model. ! The established model now contains 515 components and 0.33468 Jy ![Exited script file: muppet] wmap "J1211-1926_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 8.392 at -0.3351 degrees (North through East) ! Clean map min=-0.011981 max=0.12418 Jy/beam ! Writing clean map to FITS file: J1211-1926_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124175 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000697395 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.68486 1.68486 3.36973 6.73945 13.4789 26.9578 53.9156 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 8.392 at -0.3351 degrees (North through East) ! Clean map min=-0.011981 max=0.12418 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1211-1926_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:18:12 2019