! Started logfile: J1210-2711_S_2017_10_09_pus_uvs.log on Sun May 12 13:12:00 2019 obs J1210-2711_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1210-2711_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.621956 visibilities/baseline/integration-bin. ! Found source: J1210-2711 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 13076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1210-2711_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 401 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 385 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 878 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004849Jy sigma=0.007001 ! Fit after self-cal, rms=0.945354Jy sigma=0.006599 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=12.76 mas, bpa=-24.12 degrees ! Estimated noise=1699.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463391 Jy ! Component: 100 - total flux cleaned = 0.0557623 Jy ! Total flux subtracted in 100 components = 0.0557623 Jy ! Clean residual min=-0.006197 max=0.004747 Jy/beam ! Clean residual mean=-0.000008 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.0557623 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0557623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099183Jy sigma=0.000621 ! Fit after self-cal, rms=0.097644Jy sigma=0.000610 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.211 mas, bmaj=15.38 mas, bpa=-24.05 degrees ! Estimated noise=1093.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439684 Jy ! Component: 100 - total flux cleaned = 0.00478151 Jy ! Component: 150 - total flux cleaned = 0.00479064 Jy ! Component: 200 - total flux cleaned = 0.00479683 Jy ! Total flux subtracted in 200 components = 0.00479683 Jy ! Clean residual min=-0.003158 max=0.003260 Jy/beam ! Clean residual mean=0.000013 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.0605591 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.0605592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097321Jy sigma=0.000609 ! Fit after self-cal, rms=0.097203Jy sigma=0.000609 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 0.91 KP 1.07 ! LA 1.10 MK 0.99 NL 1.04 OV 1.00* ! PT 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.02 HN 0.97 KP 0.95 ! LA 0.96 MK 1.05 NL 1.07 OV 1.00* ! PT 1.07 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 0.94 KP 0.83 ! LA 0.74 MK 1.11 NL 1.10 OV 1.00* ! PT 1.07 ! ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 0.77 KP 1.00* ! LA 1.00* MK 0.86 NL 1.00* OV 1.00* ! PT 0.94 ! ! ! Fit before self-cal, rms=0.097203Jy sigma=0.000609 ! Fit after self-cal, rms=0.093302Jy sigma=0.000608 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=15.17 mas, bpa=-23.72 degrees ! Estimated noise=1093.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021091 Jy ! Component: 100 - total flux cleaned = 0.000430607 Jy ! Component: 150 - total flux cleaned = 0.000399433 Jy ! Component: 200 - total flux cleaned = 0.000427731 Jy ! Total flux subtracted in 200 components = 0.000427731 Jy ! Clean residual min=-0.002621 max=0.002811 Jy/beam ! Clean residual mean=0.000003 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0609869 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.0609869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093274Jy sigma=0.000607 ! Fit after self-cal, rms=0.093090Jy sigma=0.000606 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093090Jy sigma=0.000606 ! Fit after self-cal, rms=0.092666Jy sigma=0.000606 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=15.07 mas, bpa=-23.59 degrees ! Estimated noise=1091.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017067 Jy ! Component: 100 - total flux cleaned = 0.000350648 Jy ! Component: 150 - total flux cleaned = 0.000381331 Jy ! Component: 200 - total flux cleaned = 0.000379774 Jy ! Total flux subtracted in 200 components = 0.000379774 Jy ! Clean residual min=-0.002672 max=0.002862 Jy/beam ! Clean residual mean=0.000004 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0613667 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.0613667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092641Jy sigma=0.000606 ! Fit after self-cal, rms=0.092587Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, -121). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148375 Jy ! Component: 100 - total flux cleaned = 0.00127851 Jy ! Component: 150 - total flux cleaned = 0.00127876 Jy ! Component: 200 - total flux cleaned = 0.0012783 Jy ! Total flux subtracted in 200 components = 0.0012783 Jy ! Clean residual min=-0.002455 max=0.002625 Jy/beam ! Clean residual mean=0.000006 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.062645 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.062645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092507Jy sigma=0.000605 ! Fit after self-cal, rms=0.092468Jy sigma=0.000605 ! Inverting map ! Added new window around map position (-55.5, 51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259497 Jy ! Component: 100 - total flux cleaned = 0.00287065 Jy ! Component: 150 - total flux cleaned = 0.00303341 Jy ! Component: 200 - total flux cleaned = 0.00312832 Jy ! Total flux subtracted in 200 components = 0.00312832 Jy ! Clean residual min=-0.002499 max=0.002210 Jy/beam ! Clean residual mean=0.000011 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0657733 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.0657733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092368Jy sigma=0.000604 ! Fit after self-cal, rms=0.092349Jy sigma=0.000604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092349Jy sigma=0.000604 ! Fit after self-cal, rms=0.091751Jy sigma=0.000604 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=14.9 mas, bpa=-23.71 degrees ! Estimated noise=1082.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203785 Jy ! Component: 100 - total flux cleaned = 0.00257627 Jy ! Component: 150 - total flux cleaned = 0.00270667 Jy ! Component: 200 - total flux cleaned = 0.00270539 Jy ! Total flux subtracted in 200 components = 0.00270539 Jy ! Clean residual min=-0.002247 max=0.002093 Jy/beam ! Clean residual mean=0.000008 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0684787 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.0684787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091688Jy sigma=0.000603 ! Fit after self-cal, rms=0.091727Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109647 Jy ! Component: 100 - total flux cleaned = 0.00136431 Jy ! Component: 150 - total flux cleaned = 0.00132588 Jy ! Component: 200 - total flux cleaned = 0.00132643 Jy ! Total flux subtracted in 200 components = 0.00132643 Jy ! Clean residual min=-0.002363 max=0.002283 Jy/beam ! Clean residual mean=0.000010 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0698051 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 0.0698051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091686Jy sigma=0.000603 ! Fit after self-cal, rms=0.091685Jy sigma=0.000602 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091685Jy sigma=0.000602 ! Fit after self-cal, rms=0.091969Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.493 mas, bmaj=23.72 mas, bpa=-11.87 degrees ! Estimated noise=1336.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562955 Jy ! Component: 100 - total flux cleaned = 0.000626071 Jy ! Component: 150 - total flux cleaned = 0.000707988 Jy ! Component: 200 - total flux cleaned = 0.000783838 Jy ! Total flux subtracted in 200 components = 0.000783838 Jy ! Clean residual min=-0.001857 max=0.002187 Jy/beam ! Clean residual mean=0.000016 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0705889 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 0.0705889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091955Jy sigma=0.000602 ! Fit after self-cal, rms=0.091969Jy sigma=0.000602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000528 Jy ! Component: 100 - total flux cleaned = 0.000586923 Jy ! Component: 150 - total flux cleaned = 0.000613864 Jy ! Component: 200 - total flux cleaned = 0.000638147 Jy ! Total flux subtracted in 200 components = 0.000638147 Jy ! Clean residual min=-0.001879 max=0.002187 Jy/beam ! Clean residual mean=0.000018 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0712271 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 133 components and 0.0712271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091958Jy sigma=0.000602 ! Fit after self-cal, rms=0.091948Jy sigma=0.000602 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=14.79 mas, bpa=-23.85 degrees ! Estimated noise=1081.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 14.79 at -23.85 degrees (North through East) ! Clean map min=-0.0030632 max=0.059299 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=12.41 mas, bpa=-23.57 degrees ! Estimated noise=1639.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465826 Jy ! Component: 100 - total flux cleaned = 0.0566325 Jy ! Component: 150 - total flux cleaned = 0.0608447 Jy ! Component: 200 - total flux cleaned = 0.0627787 Jy ! Total flux subtracted in 200 components = 0.0627787 Jy ! Clean residual min=-0.004580 max=0.004303 Jy/beam ! Clean residual mean=-0.000007 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.0627787 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0627787 Jy ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=14.79 mas, bpa=-23.85 degrees ! Estimated noise=1081.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365593 Jy ! Component: 100 - total flux cleaned = 0.0050712 Jy ! Component: 150 - total flux cleaned = 0.00636598 Jy ! Component: 200 - total flux cleaned = 0.00685334 Jy ! Total flux subtracted in 200 components = 0.00685334 Jy ! Clean residual min=-0.002897 max=0.002558 Jy/beam ! Clean residual mean=0.000014 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0696321 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 46 components and 0.0696321 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.493 mas, bmaj=23.72 mas, bpa=-11.87 degrees ! Estimated noise=1336.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142322 Jy ! Component: 100 - total flux cleaned = 0.00192554 Jy ! Component: 150 - total flux cleaned = 0.00207151 Jy ! Component: 200 - total flux cleaned = 0.00207219 Jy ! Total flux subtracted in 200 components = 0.00207219 Jy ! Clean residual min=-0.002077 max=0.002421 Jy/beam ! Clean residual mean=0.000021 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0717043 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.9183e-05 Jy ! Component: 100 - total flux cleaned = 3.90812e-05 Jy ! Component: 150 - total flux cleaned = 3.84068e-05 Jy ! Component: 200 - total flux cleaned = 6.79716e-05 Jy ! Total flux subtracted in 200 components = 6.79716e-05 Jy ! Clean residual min=-0.002017 max=0.002409 Jy/beam ! Clean residual mean=0.000020 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0717722 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 98 components and 0.0717722 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=14.79 mas, bpa=-23.85 degrees ! Estimated noise=1081.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416179 Jy ! Component: 100 - total flux cleaned = -0.000299748 Jy ! Component: 150 - total flux cleaned = -0.000246452 Jy ! Component: 200 - total flux cleaned = -0.000198056 Jy ! Total flux subtracted in 200 components = -0.000198056 Jy ! Clean residual min=-0.002693 max=0.002441 Jy/beam ! Clean residual mean=0.000011 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0715742 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 115 components and 0.0715742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091975Jy sigma=0.000602 ! Fit after self-cal, rms=0.091981Jy sigma=0.000602 wmodel J1210-2711_S_2017_10_09_pus_map.mod ! Writing 115 model components to file: J1210-2711_S_2017_10_09_pus_map.mod wobs J1210-2711_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1210-2711_S_2017_10_09_pus_uvs.fits wwins J1210-2711_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1210-2711_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209773 Jy ! Component: 100 - total flux cleaned = -0.000510288 Jy ! Component: 150 - total flux cleaned = -0.000615199 Jy ! Component: 200 - total flux cleaned = -0.000746554 Jy ! Component: 250 - total flux cleaned = -0.000964818 Jy ! Component: 300 - total flux cleaned = -0.00117322 Jy ! Component: 350 - total flux cleaned = -0.00128686 Jy ! Component: 400 - total flux cleaned = -0.00134167 Jy ! Component: 450 - total flux cleaned = -0.00150041 Jy ! Component: 500 - total flux cleaned = -0.00157665 Jy ! Component: 550 - total flux cleaned = -0.00160091 Jy ! Component: 600 - total flux cleaned = -0.00160029 Jy ! Component: 650 - total flux cleaned = -0.00164722 Jy ! Component: 700 - total flux cleaned = -0.00171557 Jy ! Component: 750 - total flux cleaned = -0.00178226 Jy ! Component: 800 - total flux cleaned = -0.00189092 Jy ! Component: 850 - total flux cleaned = -0.00199667 Jy ! Component: 900 - total flux cleaned = -0.00212119 Jy ! Component: 950 - total flux cleaned = -0.0022639 Jy ! Component: 1000 - total flux cleaned = -0.00230388 Jy ! Component: 1050 - total flux cleaned = -0.00248036 Jy ! Component: 1100 - total flux cleaned = -0.00259541 Jy ! Component: 1150 - total flux cleaned = -0.00270849 Jy ! Component: 1200 - total flux cleaned = -0.00287606 Jy ! Component: 1250 - total flux cleaned = -0.00304088 Jy ! Component: 1300 - total flux cleaned = -0.00331148 Jy ! Component: 1350 - total flux cleaned = -0.00347121 Jy ! Component: 1400 - total flux cleaned = -0.00364596 Jy ! Component: 1450 - total flux cleaned = -0.00385296 Jy ! Component: 1500 - total flux cleaned = -0.00398929 Jy ! Component: 1550 - total flux cleaned = -0.00420758 Jy ! Component: 1600 - total flux cleaned = -0.004423 Jy ! Component: 1650 - total flux cleaned = -0.00460273 Jy ! Component: 1700 - total flux cleaned = -0.00478027 Jy ! Component: 1750 - total flux cleaned = -0.00495569 Jy ! Component: 1800 - total flux cleaned = -0.00511309 Jy ! Component: 1850 - total flux cleaned = -0.00526847 Jy ! Component: 1900 - total flux cleaned = -0.00545266 Jy ! Component: 1950 - total flux cleaned = -0.00557439 Jy ! Component: 2000 - total flux cleaned = -0.00576953 Jy ! Component: 2050 - total flux cleaned = -0.00591789 Jy ! Component: 2100 - total flux cleaned = -0.00607933 Jy ! Component: 2150 - total flux cleaned = -0.00626769 Jy ! Component: 2200 - total flux cleaned = -0.00646814 Jy ! Component: 2250 - total flux cleaned = -0.00660967 Jy ! Component: 2300 - total flux cleaned = -0.00679159 Jy ! Component: 2350 - total flux cleaned = -0.00688821 Jy ! Component: 2400 - total flux cleaned = -0.00703886 Jy ! Component: 2450 - total flux cleaned = -0.00716092 Jy ! Component: 2500 - total flux cleaned = -0.00730876 Jy ! Component: 2550 - total flux cleaned = -0.00745512 Jy ! Component: 2600 - total flux cleaned = -0.00757376 Jy ! Component: 2650 - total flux cleaned = -0.00769125 Jy ! Component: 2700 - total flux cleaned = -0.00782079 Jy ! Component: 2750 - total flux cleaned = -0.00791066 Jy ! Component: 2800 - total flux cleaned = -0.0080125 Jy ! Component: 2850 - total flux cleaned = -0.00812616 Jy ! Component: 2900 - total flux cleaned = -0.00821384 Jy ! Component: 2950 - total flux cleaned = -0.00832569 Jy ! Component: 3000 - total flux cleaned = -0.00844896 Jy ! Component: 3050 - total flux cleaned = -0.00854674 Jy ! Component: 3100 - total flux cleaned = -0.00866806 Jy ! Component: 3150 - total flux cleaned = -0.0087523 Jy ! Component: 3200 - total flux cleaned = -0.00887176 Jy ! Component: 3250 - total flux cleaned = -0.00895476 Jy ! Component: 3300 - total flux cleaned = -0.00902552 Jy ! Component: 3350 - total flux cleaned = -0.00911912 Jy ! Component: 3400 - total flux cleaned = -0.00914243 Jy ! Component: 3450 - total flux cleaned = -0.00924644 Jy ! Component: 3500 - total flux cleaned = -0.00932659 Jy ! Component: 3550 - total flux cleaned = -0.00940642 Jy ! Component: 3600 - total flux cleaned = -0.00947434 Jy ! Component: 3650 - total flux cleaned = -0.00956423 Jy ! Component: 3700 - total flux cleaned = -0.00959766 Jy ! Component: 3750 - total flux cleaned = -0.00968642 Jy ! Component: 3800 - total flux cleaned = -0.00974164 Jy ! Component: 3850 - total flux cleaned = -0.00980744 Jy ! Component: 3900 - total flux cleaned = -0.00986194 Jy ! Component: 3950 - total flux cleaned = -0.00992697 Jy ! Component: 4000 - total flux cleaned = -0.0100239 Jy ! Component: 4050 - total flux cleaned = -0.0101097 Jy ! Total flux subtracted in 4096 components = -0.0101842 Jy ! Clean residual min=-0.000580 max=0.000635 Jy/beam ! Clean residual mean=0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.06139 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 349 components and 0.06139 Jy ![Exited script file: muppet] wmap "J1210-2711_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 14.79 at -23.85 degrees (North through East) ! Clean map min=-0.0026774 max=0.058228 Jy/beam ! Writing clean map to FITS file: J1210-2711_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0582276 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189053 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.974037 0.974037 1.94807 3.89615 7.7923 15.5846 31.1692 62.3384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 14.79 at -23.85 degrees (North through East) ! Clean map min=-0.0026774 max=0.058228 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1210-2711_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:05 2019