! Started logfile: J1210-2711_S_2017_03_23_pus_uvs.log on Mon May 13 10:00:00 2019 obs J1210-2711_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1210-2711_S_2017_03_23_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785965 visibilities/baseline/integration-bin. ! Found source: J1210-2711 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 13440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1210-2711_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 338 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007521Jy sigma=0.006425 ! Fit after self-cal, rms=0.948148Jy sigma=0.006067 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=6.543 mas, bpa=-3.288 degrees ! Estimated noise=1812.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447698 Jy ! Component: 100 - total flux cleaned = 0.0547265 Jy ! Total flux subtracted in 100 components = 0.0547265 Jy ! Clean residual min=-0.004685 max=0.005662 Jy/beam ! Clean residual mean=0.000007 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.0547265 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0547265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109778Jy sigma=0.000638 ! Fit after self-cal, rms=0.108080Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=7.775 mas, bpa=-0.6137 degrees ! Estimated noise=1050.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434883 Jy ! Component: 100 - total flux cleaned = 0.00501764 Jy ! Component: 150 - total flux cleaned = 0.00516378 Jy ! Component: 200 - total flux cleaned = 0.00514139 Jy ! Total flux subtracted in 200 components = 0.00514139 Jy ! Clean residual min=-0.003229 max=0.003125 Jy/beam ! Clean residual mean=0.000004 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0598679 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 0.0598679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107851Jy sigma=0.000627 ! Fit after self-cal, rms=0.107811Jy sigma=0.000626 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 0.99 KP 0.99 ! LA 1.01 MK 0.89 NL 0.78 OV 1.21 ! PT 1.21 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.95 KP 1.14 ! LA 0.97 MK 1.07 NL 0.93 OV 1.10 ! PT 1.16 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.11 HN 0.93 KP 0.95 ! LA 0.87 MK 1.04 NL 1.07 OV 0.96 ! PT 1.14 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.09 HN 0.82 KP 1.00* ! LA 0.75 MK 0.93 NL 1.00* OV 0.93 ! PT 1.03 SC 1.06 ! ! ! Fit before self-cal, rms=0.107811Jy sigma=0.000626 ! Fit after self-cal, rms=0.102638Jy sigma=0.000624 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.764 mas, bpa=-1.046 degrees ! Estimated noise=1045.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211042 Jy ! Component: 100 - total flux cleaned = -0.000146191 Jy ! Component: 150 - total flux cleaned = -0.00012678 Jy ! Component: 200 - total flux cleaned = -0.000110997 Jy ! Total flux subtracted in 200 components = -0.000110997 Jy ! Clean residual min=-0.002503 max=0.002415 Jy/beam ! Clean residual mean=0.000004 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0597569 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.0597569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102629Jy sigma=0.000624 ! Fit after self-cal, rms=0.102402Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102402Jy sigma=0.000623 ! Fit after self-cal, rms=0.101751Jy sigma=0.000622 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=7.697 mas, bpa=-1.013 degrees ! Estimated noise=1043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140851 Jy ! Component: 100 - total flux cleaned = 0.000103376 Jy ! Component: 150 - total flux cleaned = 0.000102649 Jy ! Component: 200 - total flux cleaned = 8.81749e-05 Jy ! Total flux subtracted in 200 components = 8.81749e-05 Jy ! Clean residual min=-0.002398 max=0.002305 Jy/beam ! Clean residual mean=0.000003 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0598451 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0598451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101744Jy sigma=0.000622 ! Fit after self-cal, rms=0.101722Jy sigma=0.000622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127197 Jy ! Component: 100 - total flux cleaned = -0.000144024 Jy ! Component: 150 - total flux cleaned = -0.000144216 Jy ! Component: 200 - total flux cleaned = -0.000158076 Jy ! Total flux subtracted in 200 components = -0.000158076 Jy ! Clean residual min=-0.002505 max=0.002424 Jy/beam ! Clean residual mean=0.000005 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.059687 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.059687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101716Jy sigma=0.000622 ! Fit after self-cal, rms=0.101714Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101714Jy sigma=0.000622 ! Fit after self-cal, rms=0.102095Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.349 mas, bmaj=7.667 mas, bpa=-0.8843 degrees ! Estimated noise=1039.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114807 Jy ! Component: 100 - total flux cleaned = -0.000217511 Jy ! Component: 150 - total flux cleaned = -0.000244132 Jy ! Component: 200 - total flux cleaned = -0.000266063 Jy ! Total flux subtracted in 200 components = -0.000266063 Jy ! Clean residual min=-0.002599 max=0.002445 Jy/beam ! Clean residual mean=0.000004 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.059421 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.059421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102089Jy sigma=0.000621 ! Fit after self-cal, rms=0.102117Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139765 Jy ! Component: 100 - total flux cleaned = -0.000167926 Jy ! Component: 150 - total flux cleaned = -0.000168497 Jy ! Component: 200 - total flux cleaned = -0.00017974 Jy ! Total flux subtracted in 200 components = -0.00017974 Jy ! Clean residual min=-0.002572 max=0.002391 Jy/beam ! Clean residual mean=0.000005 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0592412 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.0592412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102113Jy sigma=0.000621 ! Fit after self-cal, rms=0.102097Jy sigma=0.000621 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102097Jy sigma=0.000621 ! Fit after self-cal, rms=0.102002Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=17.47 mas, bpa=2.675 degrees ! Estimated noise=1307.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000468443 Jy ! Component: 100 - total flux cleaned = -0.000453753 Jy ! Component: 150 - total flux cleaned = -0.000454254 Jy ! Component: 200 - total flux cleaned = -0.000464177 Jy ! Total flux subtracted in 200 components = -0.000464177 Jy ! Clean residual min=-0.002506 max=0.002761 Jy/beam ! Clean residual mean=0.000007 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.058777 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.058777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102000Jy sigma=0.000621 ! Fit after self-cal, rms=0.102008Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196409 Jy ! Component: 100 - total flux cleaned = -0.000182225 Jy ! Component: 150 - total flux cleaned = -0.000181511 Jy ! Component: 200 - total flux cleaned = -0.000181578 Jy ! Total flux subtracted in 200 components = -0.000181578 Jy ! Clean residual min=-0.002485 max=0.002795 Jy/beam ! Clean residual mean=0.000007 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0585955 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0585955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102007Jy sigma=0.000621 ! Fit after self-cal, rms=0.102005Jy sigma=0.000621 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.649 mas, bpa=-0.7914 degrees ! Estimated noise=1036.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 7.649 at -0.7914 degrees (North through East) ! Clean map min=-0.0024331 max=0.061 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=6.484 mas, bpa=-3.492 degrees ! Estimated noise=1777.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046841 Jy ! Component: 100 - total flux cleaned = 0.0571878 Jy ! Component: 150 - total flux cleaned = 0.0587894 Jy ! Component: 200 - total flux cleaned = 0.0587065 Jy ! Total flux subtracted in 200 components = 0.0587065 Jy ! Clean residual min=-0.003873 max=0.004313 Jy/beam ! Clean residual mean=0.000003 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.0587065 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0587065 Jy ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.649 mas, bpa=-0.7914 degrees ! Estimated noise=1036.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.51454e-05 Jy ! Component: 100 - total flux cleaned = 8.90991e-05 Jy ! Component: 150 - total flux cleaned = 3.82307e-05 Jy ! Component: 200 - total flux cleaned = -5.38205e-06 Jy ! Total flux subtracted in 200 components = -5.38205e-06 Jy ! Clean residual min=-0.002505 max=0.002277 Jy/beam ! Clean residual mean=0.000004 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0587012 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.0587012 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.351 mas, bmaj=17.47 mas, bpa=2.675 degrees ! Estimated noise=1307.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125564 Jy ! Component: 100 - total flux cleaned = -0.00012155 Jy ! Component: 150 - total flux cleaned = -0.00011719 Jy ! Component: 200 - total flux cleaned = -0.000114236 Jy ! Total flux subtracted in 200 components = -0.000114236 Jy ! Clean residual min=-0.002546 max=0.002898 Jy/beam ! Clean residual mean=0.000007 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.0585869 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.1874e-07 Jy ! Component: 100 - total flux cleaned = 1.59263e-06 Jy ! Component: 150 - total flux cleaned = -2.94121e-08 Jy ! Component: 200 - total flux cleaned = -1.25551e-05 Jy ! Total flux subtracted in 200 components = -1.25551e-05 Jy ! Clean residual min=-0.002479 max=0.002823 Jy/beam ! Clean residual mean=0.000007 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.0585744 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 51 components and 0.0585744 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=7.649 mas, bpa=-0.7914 degrees ! Estimated noise=1036.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4857e-05 Jy ! Component: 100 - total flux cleaned = 5.48831e-06 Jy ! Component: 150 - total flux cleaned = 3.31756e-05 Jy ! Component: 200 - total flux cleaned = 5.59019e-05 Jy ! Total flux subtracted in 200 components = 5.59019e-05 Jy ! Clean residual min=-0.002553 max=0.002298 Jy/beam ! Clean residual mean=0.000004 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0586303 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.0586303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102005Jy sigma=0.000621 ! Fit after self-cal, rms=0.101999Jy sigma=0.000621 wmodel J1210-2711_S_2017_03_23_pus_map.mod ! Writing 56 model components to file: J1210-2711_S_2017_03_23_pus_map.mod wobs J1210-2711_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1210-2711_S_2017_03_23_pus_uvs.fits wwins J1210-2711_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J1210-2711_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408685 Jy ! Component: 100 - total flux cleaned = -0.000681733 Jy ! Component: 150 - total flux cleaned = -0.000828963 Jy ! Component: 200 - total flux cleaned = -0.000864598 Jy ! Component: 250 - total flux cleaned = -0.000797325 Jy ! Component: 300 - total flux cleaned = -0.000764998 Jy ! Component: 350 - total flux cleaned = -0.000764637 Jy ! Component: 400 - total flux cleaned = -0.000702963 Jy ! Component: 450 - total flux cleaned = -0.000672959 Jy ! Component: 500 - total flux cleaned = -0.000614333 Jy ! Component: 550 - total flux cleaned = -0.000556824 Jy ! Component: 600 - total flux cleaned = -0.000557202 Jy ! Component: 650 - total flux cleaned = -0.000612256 Jy ! Component: 700 - total flux cleaned = -0.000558636 Jy ! Component: 750 - total flux cleaned = -0.000532451 Jy ! Component: 800 - total flux cleaned = -0.000480898 Jy ! Component: 850 - total flux cleaned = -0.000430325 Jy ! Component: 900 - total flux cleaned = -0.00042992 Jy ! Component: 950 - total flux cleaned = -0.00030728 Jy ! Component: 1000 - total flux cleaned = -0.000211013 Jy ! Component: 1050 - total flux cleaned = -9.29648e-05 Jy ! Component: 1100 - total flux cleaned = -7.10199e-07 Jy ! Component: 1150 - total flux cleaned = 0.000112753 Jy ! Component: 1200 - total flux cleaned = 0.000157557 Jy ! Component: 1250 - total flux cleaned = 0.000223632 Jy ! Component: 1300 - total flux cleaned = 0.000354206 Jy ! Component: 1350 - total flux cleaned = 0.000461742 Jy ! Component: 1400 - total flux cleaned = 0.000588238 Jy ! Component: 1450 - total flux cleaned = 0.000671425 Jy ! Component: 1500 - total flux cleaned = 0.000794283 Jy ! Component: 1550 - total flux cleaned = 0.000834407 Jy ! Component: 1600 - total flux cleaned = 0.000954018 Jy ! Component: 1650 - total flux cleaned = 0.00113118 Jy ! Component: 1700 - total flux cleaned = 0.00118957 Jy ! Component: 1750 - total flux cleaned = 0.00128579 Jy ! Component: 1800 - total flux cleaned = 0.0013616 Jy ! Component: 1850 - total flux cleaned = 0.00151114 Jy ! Component: 1900 - total flux cleaned = 0.00156648 Jy ! Component: 1950 - total flux cleaned = 0.00171205 Jy ! Component: 2000 - total flux cleaned = 0.0017301 Jy ! Component: 2050 - total flux cleaned = 0.00187298 Jy ! Component: 2100 - total flux cleaned = 0.00199642 Jy ! Component: 2150 - total flux cleaned = 0.00203126 Jy ! Component: 2200 - total flux cleaned = 0.00211768 Jy ! Component: 2250 - total flux cleaned = 0.0021689 Jy ! Component: 2300 - total flux cleaned = 0.00228739 Jy ! Component: 2350 - total flux cleaned = 0.0023709 Jy ! Component: 2400 - total flux cleaned = 0.00245364 Jy ! Component: 2450 - total flux cleaned = 0.00253547 Jy ! Component: 2500 - total flux cleaned = 0.00266523 Jy ! Component: 2550 - total flux cleaned = 0.00268102 Jy ! Component: 2600 - total flux cleaned = 0.0027767 Jy ! Component: 2650 - total flux cleaned = 0.00282413 Jy ! Component: 2700 - total flux cleaned = 0.00287088 Jy ! Component: 2750 - total flux cleaned = 0.0029792 Jy ! Component: 2800 - total flux cleaned = 0.00302507 Jy ! Component: 2850 - total flux cleaned = 0.00308596 Jy ! Component: 2900 - total flux cleaned = 0.00314613 Jy ! Component: 2950 - total flux cleaned = 0.00319066 Jy ! Component: 3000 - total flux cleaned = 0.00322026 Jy ! Component: 3050 - total flux cleaned = 0.00320581 Jy ! Component: 3100 - total flux cleaned = 0.00327887 Jy ! Component: 3150 - total flux cleaned = 0.00333683 Jy ! Component: 3200 - total flux cleaned = 0.00339413 Jy ! Component: 3250 - total flux cleaned = 0.00345099 Jy ! Component: 3300 - total flux cleaned = 0.00350742 Jy ! Component: 3350 - total flux cleaned = 0.00356333 Jy ! Component: 3400 - total flux cleaned = 0.00360494 Jy ! Component: 3450 - total flux cleaned = 0.00364647 Jy ! Component: 3500 - total flux cleaned = 0.00368742 Jy ! Component: 3550 - total flux cleaned = 0.00374175 Jy ! Component: 3600 - total flux cleaned = 0.0038493 Jy ! Component: 3650 - total flux cleaned = 0.0038895 Jy ! Component: 3700 - total flux cleaned = 0.00392942 Jy ! Component: 3750 - total flux cleaned = 0.00403496 Jy ! Component: 3800 - total flux cleaned = 0.00413966 Jy ! Component: 3850 - total flux cleaned = 0.00421764 Jy ! Component: 3900 - total flux cleaned = 0.00429511 Jy ! Component: 3950 - total flux cleaned = 0.00435925 Jy ! Component: 4000 - total flux cleaned = 0.00447402 Jy ! Component: 4050 - total flux cleaned = 0.00456272 Jy ! Total flux subtracted in 4096 components = 0.0046382 Jy ! Clean residual min=-0.000721 max=0.000854 Jy/beam ! Clean residual mean=0.000003 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.0632685 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 349 components and 0.0632685 Jy ![Exited script file: muppet] wmap "J1210-2711_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 7.649 at -0.7914 degrees (North through East) ! Clean map min=-0.0021039 max=0.060585 Jy/beam ! Writing clean map to FITS file: J1210-2711_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0605846 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228638 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13216 1.13216 2.26432 4.52864 9.05727 18.1145 36.2291 72.4582 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 7.649 at -0.7914 degrees (North through East) ! Clean map min=-0.0021039 max=0.060585 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1210-2711_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:00:06 2019