! Started logfile: J1209-3214_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:13:24 2019 obs J1209-3214_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1209-3214_S_2017_01_16_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.696 visibilities/baseline/integration-bin. ! Found source: J1209-3214 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 9396 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1209-3214_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.806129Jy sigma=0.004912 ! Fit after self-cal, rms=0.790324Jy sigma=0.004833 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.052 mas, bmaj=12.46 mas, bpa=18.87 degrees ! Estimated noise=2071.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.168955 Jy ! Component: 100 - total flux cleaned = 0.206626 Jy ! Total flux subtracted in 100 components = 0.206626 Jy ! Clean residual min=-0.008220 max=0.014427 Jy/beam ! Clean residual mean=0.000012 rms=0.002566 Jy/beam ! Combined flux in latest and established models = 0.206625 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.206625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185424Jy sigma=0.000688 ! Fit after self-cal, rms=0.185440Jy sigma=0.000688 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.958 mas, bmaj=14.85 mas, bpa=17.05 degrees ! Estimated noise=1277.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177535 Jy ! Component: 100 - total flux cleaned = 0.0264058 Jy ! Component: 150 - total flux cleaned = 0.0310263 Jy ! Component: 200 - total flux cleaned = 0.0325188 Jy ! Total flux subtracted in 200 components = 0.0325188 Jy ! Clean residual min=-0.005725 max=0.007411 Jy/beam ! Clean residual mean=0.000062 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 0.239144 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.239144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182463Jy sigma=0.000674 ! Fit after self-cal, rms=0.182492Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.10 KP 0.97 ! LA 0.99 MK 1.00* NL 0.94 OV 0.96 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 1.26 KP 0.98 ! LA 0.99 MK 1.00* NL 1.03 OV 0.98 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.02 HN 1.06 KP 1.01 ! LA 1.03 MK 1.00* NL 1.01 OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.01 KP 1.00 ! LA 1.21 MK 1.00* NL 1.00* OV 0.95 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.182492Jy sigma=0.000674 ! Fit after self-cal, rms=0.190255Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=14.95 mas, bpa=17.36 degrees ! Estimated noise=1292.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189124 Jy ! Component: 100 - total flux cleaned = 0.00173384 Jy ! Component: 150 - total flux cleaned = 0.00159883 Jy ! Component: 200 - total flux cleaned = 0.00141993 Jy ! Total flux subtracted in 200 components = 0.00141993 Jy ! Clean residual min=-0.005518 max=0.004503 Jy/beam ! Clean residual mean=0.000052 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.240564 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 42 components and 0.240564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190113Jy sigma=0.000666 ! Fit after self-cal, rms=0.190188Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190188Jy sigma=0.000665 ! Fit after self-cal, rms=0.158840Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=14.94 mas, bpa=17.42 degrees ! Estimated noise=1305.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264256 Jy ! Component: 100 - total flux cleaned = 0.00270938 Jy ! Component: 150 - total flux cleaned = 0.00270929 Jy ! Component: 200 - total flux cleaned = 0.00266622 Jy ! Total flux subtracted in 200 components = 0.00266622 Jy ! Clean residual min=-0.004247 max=0.003822 Jy/beam ! Clean residual mean=0.000032 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.24323 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.24323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158673Jy sigma=0.000657 ! Fit after self-cal, rms=0.158702Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1575e-05 Jy ! Component: 100 - total flux cleaned = -1.49774e-05 Jy ! Component: 150 - total flux cleaned = -7.82677e-05 Jy ! Component: 200 - total flux cleaned = -7.87004e-05 Jy ! Total flux subtracted in 200 components = -7.87004e-05 Jy ! Clean residual min=-0.004272 max=0.003820 Jy/beam ! Clean residual mean=0.000032 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.243152 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.243152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158683Jy sigma=0.000657 ! Fit after self-cal, rms=0.158680Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158680Jy sigma=0.000657 ! Fit after self-cal, rms=0.135831Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.933 mas, bmaj=14.95 mas, bpa=17.36 degrees ! Estimated noise=1306.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125711 Jy ! Component: 100 - total flux cleaned = -0.00144181 Jy ! Component: 150 - total flux cleaned = -0.00156249 Jy ! Component: 200 - total flux cleaned = -0.00163521 Jy ! Total flux subtracted in 200 components = -0.00163521 Jy ! Clean residual min=-0.003371 max=0.002926 Jy/beam ! Clean residual mean=0.000004 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.241516 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.241516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135789Jy sigma=0.000650 ! Fit after self-cal, rms=0.135712Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.88607e-05 Jy ! Component: 100 - total flux cleaned = -9.92306e-05 Jy ! Component: 150 - total flux cleaned = -0.000153446 Jy ! Component: 200 - total flux cleaned = -0.000152479 Jy ! Total flux subtracted in 200 components = -0.000152479 Jy ! Clean residual min=-0.003374 max=0.002933 Jy/beam ! Clean residual mean=0.000004 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.241364 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.241364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135693Jy sigma=0.000650 ! Fit after self-cal, rms=0.135692Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135692Jy sigma=0.000650 ! Fit after self-cal, rms=0.136178Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.854 mas, bmaj=25.71 mas, bpa=7.351 degrees ! Estimated noise=1485.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000708843 Jy ! Component: 100 - total flux cleaned = -0.00077795 Jy ! Component: 150 - total flux cleaned = -0.000817593 Jy ! Component: 200 - total flux cleaned = -0.000835933 Jy ! Total flux subtracted in 200 components = -0.000835933 Jy ! Clean residual min=-0.003128 max=0.002463 Jy/beam ! Clean residual mean=0.000007 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.240528 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 101 components and 0.240528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136165Jy sigma=0.000649 ! Fit after self-cal, rms=0.136165Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.42196e-05 Jy ! Component: 100 - total flux cleaned = -6.38597e-05 Jy ! Component: 150 - total flux cleaned = -9.175e-05 Jy ! Component: 200 - total flux cleaned = -0.000117389 Jy ! Total flux subtracted in 200 components = -0.000117389 Jy ! Clean residual min=-0.003111 max=0.002457 Jy/beam ! Clean residual mean=0.000007 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.240411 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.240411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136160Jy sigma=0.000649 ! Fit after self-cal, rms=0.136158Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=14.98 mas, bpa=17.34 degrees ! Estimated noise=1306.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.938 x 14.98 at 17.34 degrees (North through East) ! Clean map min=-0.0033044 max=0.21954 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=12.52 mas, bpa=18.99 degrees ! Estimated noise=2128.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.17351 Jy ! Component: 100 - total flux cleaned = 0.211498 Jy ! Component: 150 - total flux cleaned = 0.223193 Jy ! Component: 200 - total flux cleaned = 0.229474 Jy ! Total flux subtracted in 200 components = 0.229474 Jy ! Clean residual min=-0.005796 max=0.005397 Jy/beam ! Clean residual mean=-0.000003 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.229474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.229474 Jy ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=14.98 mas, bpa=17.34 degrees ! Estimated noise=1306.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562275 Jy ! Component: 100 - total flux cleaned = 0.00801591 Jy ! Component: 150 - total flux cleaned = 0.00845239 Jy ! Component: 200 - total flux cleaned = 0.00881468 Jy ! Total flux subtracted in 200 components = 0.00881468 Jy ! Clean residual min=-0.003465 max=0.003195 Jy/beam ! Clean residual mean=0.000001 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.238288 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 54 components and 0.238288 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.854 mas, bmaj=25.71 mas, bpa=7.351 degrees ! Estimated noise=1485.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903411 Jy ! Component: 100 - total flux cleaned = 0.00102373 Jy ! Component: 150 - total flux cleaned = 0.0011284 Jy ! Component: 200 - total flux cleaned = 0.00122122 Jy ! Total flux subtracted in 200 components = 0.00122122 Jy ! Clean residual min=-0.003052 max=0.002640 Jy/beam ! Clean residual mean=0.000005 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.239509 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.13373e-05 Jy ! Component: 100 - total flux cleaned = 0.000136094 Jy ! Component: 150 - total flux cleaned = 0.000203081 Jy ! Component: 200 - total flux cleaned = 0.000262883 Jy ! Total flux subtracted in 200 components = 0.000262883 Jy ! Clean residual min=-0.003023 max=0.002588 Jy/beam ! Clean residual mean=0.000005 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.239772 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.239772 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.938 mas, bmaj=14.98 mas, bpa=17.34 degrees ! Estimated noise=1306.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238348 Jy ! Component: 100 - total flux cleaned = -0.000238133 Jy ! Component: 150 - total flux cleaned = -0.000211832 Jy ! Component: 200 - total flux cleaned = -0.000212529 Jy ! Total flux subtracted in 200 components = -0.000212529 Jy ! Clean residual min=-0.003381 max=0.003052 Jy/beam ! Clean residual mean=0.000003 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.23956 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 83 components and 0.23956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136190Jy sigma=0.000650 ! Fit after self-cal, rms=0.136174Jy sigma=0.000650 wmodel J1209-3214_S_2017_01_16_pus_map.mod ! Writing 83 model components to file: J1209-3214_S_2017_01_16_pus_map.mod wobs J1209-3214_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1209-3214_S_2017_01_16_pus_uvs.fits wwins J1209-3214_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1209-3214_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000721063 Jy ! Component: 100 - total flux cleaned = -0.00107528 Jy ! Component: 150 - total flux cleaned = -0.00131205 Jy ! Component: 200 - total flux cleaned = -0.00167201 Jy ! Component: 250 - total flux cleaned = -0.00188782 Jy ! Component: 300 - total flux cleaned = -0.00192896 Jy ! Component: 350 - total flux cleaned = -0.0020074 Jy ! Component: 400 - total flux cleaned = -0.00200781 Jy ! Component: 450 - total flux cleaned = -0.00208416 Jy ! Component: 500 - total flux cleaned = -0.00204769 Jy ! Component: 550 - total flux cleaned = -0.00201158 Jy ! Component: 600 - total flux cleaned = -0.00201139 Jy ! Component: 650 - total flux cleaned = -0.00211307 Jy ! Component: 700 - total flux cleaned = -0.00214639 Jy ! Component: 750 - total flux cleaned = -0.00221173 Jy ! Component: 800 - total flux cleaned = -0.00233938 Jy ! Component: 850 - total flux cleaned = -0.00246502 Jy ! Component: 900 - total flux cleaned = -0.00252596 Jy ! Component: 950 - total flux cleaned = -0.00255681 Jy ! Component: 1000 - total flux cleaned = -0.00270518 Jy ! Component: 1050 - total flux cleaned = -0.00282153 Jy ! Component: 1100 - total flux cleaned = -0.00293569 Jy ! Component: 1150 - total flux cleaned = -0.00293503 Jy ! Component: 1200 - total flux cleaned = -0.00304528 Jy ! Component: 1250 - total flux cleaned = -0.00307221 Jy ! Component: 1300 - total flux cleaned = -0.0031525 Jy ! Component: 1350 - total flux cleaned = -0.00317898 Jy ! Component: 1400 - total flux cleaned = -0.00328296 Jy ! Component: 1450 - total flux cleaned = -0.00341041 Jy ! Component: 1500 - total flux cleaned = -0.00351118 Jy ! Component: 1550 - total flux cleaned = -0.00356059 Jy ! Component: 1600 - total flux cleaned = -0.00363378 Jy ! Component: 1650 - total flux cleaned = -0.00368208 Jy ! Component: 1700 - total flux cleaned = -0.00370581 Jy ! Component: 1750 - total flux cleaned = -0.00382313 Jy ! Component: 1800 - total flux cleaned = -0.0037997 Jy ! Component: 1850 - total flux cleaned = -0.00393705 Jy ! Component: 1900 - total flux cleaned = -0.00393684 Jy ! Component: 1950 - total flux cleaned = -0.00398146 Jy ! Component: 2000 - total flux cleaned = -0.00398123 Jy ! Component: 2050 - total flux cleaned = -0.0040682 Jy ! Component: 2100 - total flux cleaned = -0.00408963 Jy ! Component: 2150 - total flux cleaned = -0.00419541 Jy ! Component: 2200 - total flux cleaned = -0.00421631 Jy ! Component: 2250 - total flux cleaned = -0.00423697 Jy ! Component: 2300 - total flux cleaned = -0.00431912 Jy ! Component: 2350 - total flux cleaned = -0.00435983 Jy ! Component: 2400 - total flux cleaned = -0.00436007 Jy ! Component: 2450 - total flux cleaned = -0.00438001 Jy ! Component: 2500 - total flux cleaned = -0.0044979 Jy ! Component: 2550 - total flux cleaned = -0.00451724 Jy ! Component: 2600 - total flux cleaned = -0.0045943 Jy ! Component: 2650 - total flux cleaned = -0.00461315 Jy ! Component: 2700 - total flux cleaned = -0.00465098 Jy ! Component: 2750 - total flux cleaned = -0.00468865 Jy ! Component: 2800 - total flux cleaned = -0.00472582 Jy ! Component: 2850 - total flux cleaned = -0.00483661 Jy ! Component: 2900 - total flux cleaned = -0.004855 Jy ! Component: 2950 - total flux cleaned = -0.00487317 Jy ! Component: 3000 - total flux cleaned = -0.00498088 Jy ! Component: 3050 - total flux cleaned = -0.00501661 Jy ! Component: 3100 - total flux cleaned = -0.00508738 Jy ! Component: 3150 - total flux cleaned = -0.00519242 Jy ! Component: 3200 - total flux cleaned = -0.0052621 Jy ! Component: 3250 - total flux cleaned = -0.00536585 Jy ! Component: 3300 - total flux cleaned = -0.00546855 Jy ! Component: 3350 - total flux cleaned = -0.00553631 Jy ! Component: 3400 - total flux cleaned = -0.00560367 Jy ! Component: 3450 - total flux cleaned = -0.00568749 Jy ! Component: 3500 - total flux cleaned = -0.00577064 Jy ! Component: 3550 - total flux cleaned = -0.00591914 Jy ! Component: 3600 - total flux cleaned = -0.00600122 Jy ! Component: 3650 - total flux cleaned = -0.0061314 Jy ! Component: 3700 - total flux cleaned = -0.00619586 Jy ! Component: 3750 - total flux cleaned = -0.00630827 Jy ! Component: 3800 - total flux cleaned = -0.00638785 Jy ! Component: 3850 - total flux cleaned = -0.00653053 Jy ! Component: 3900 - total flux cleaned = -0.00659323 Jy ! Component: 3950 - total flux cleaned = -0.00673389 Jy ! Component: 4000 - total flux cleaned = -0.00678032 Jy ! Component: 4050 - total flux cleaned = -0.0067958 Jy ! Total flux subtracted in 4096 components = -0.00693378 Jy ! Clean residual min=-0.000866 max=0.000887 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.232626 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 321 components and 0.232626 Jy ![Exited script file: muppet] wmap "J1209-3214_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.938 x 14.98 at 17.34 degrees (North through East) ! Clean map min=-0.0023236 max=0.22044 Jy/beam ! Writing clean map to FITS file: J1209-3214_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.220439 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000279394 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.380234 0.380234 0.760467 1.52093 3.04187 6.08374 12.1675 24.3349 48.6699 97.3398 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.22 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.938 x 14.98 at 17.34 degrees (North through East) ! Clean map min=-0.0023236 max=0.22044 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1209-3214_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:13:29 2019