! Started logfile: J1209+4119_S_2017_05_01_pus_uvs.log on Wed May 1 18:34:57 2019 obs J1209+4119_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1209+4119_S_2017_05_01_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.776975 visibilities/baseline/integration-bin. ! Found source: J1209+4119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 11608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1209+4119_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 411 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.838784Jy sigma=0.037919 ! Fit after self-cal, rms=0.834414Jy sigma=0.037690 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=6.17 mas, bpa=10.55 degrees ! Estimated noise=843.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.098991 Jy ! Component: 100 - total flux cleaned = 0.112768 Jy ! Total flux subtracted in 100 components = 0.112768 Jy ! Clean residual min=-0.032910 max=0.034871 Jy/beam ! Clean residual mean=0.000053 rms=0.014456 Jy/beam ! Combined flux in latest and established models = 0.112768 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.112768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104983Jy sigma=0.004247 ! Fit after self-cal, rms=0.104958Jy sigma=0.004245 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.508 mas, bmaj=6.658 mas, bpa=15.57 degrees ! Estimated noise=610.065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00324968 Jy ! Component: 100 - total flux cleaned = -0.00243411 Jy ! Component: 150 - total flux cleaned = -0.00138079 Jy ! Component: 200 - total flux cleaned = -0.000200781 Jy ! Total flux subtracted in 200 components = -0.000200781 Jy ! Clean residual min=-0.033410 max=0.035869 Jy/beam ! Clean residual mean=0.000001 rms=0.012498 Jy/beam ! Combined flux in latest and established models = 0.112567 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.112567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102715Jy sigma=0.004143 ! Fit after self-cal, rms=0.102679Jy sigma=0.004143 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.73 HN 1.03 KP 0.81 ! LA 0.75 MK 0.98 NL 0.91 OV 0.82 ! PT 0.79 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.73 HN 0.96 KP 0.79 ! LA 0.77 MK 0.96 NL 0.89 OV 0.86 ! PT 0.77 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.79 HN 0.96 KP 0.80 ! LA 0.77 MK 1.00 NL 0.86 OV 0.80 ! PT 0.75 SC 1.01 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.20 FD 2.75 HN 3.42 KP 1.00* ! LA 9.50 MK 4.65 NL 1.00* OV 1.00* ! PT 0.21 SC 1.00* ! ! ! Fit before self-cal, rms=0.102679Jy sigma=0.004143 ! Fit after self-cal, rms=1.009219Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.253 mas, bmaj=6.825 mas, bpa=13.01 degrees ! Estimated noise=628.302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430258 Jy ! Component: 100 - total flux cleaned = 0.00428572 Jy ! Component: 150 - total flux cleaned = 0.00428472 Jy ! Component: 200 - total flux cleaned = 0.00439824 Jy ! Total flux subtracted in 200 components = 0.00439824 Jy ! Clean residual min=-0.003898 max=0.004960 Jy/beam ! Clean residual mean=-0.000001 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.116966 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.116966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.008357Jy sigma=0.000765 ! Fit after self-cal, rms=1.011483Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.011483Jy sigma=0.000762 ! Fit after self-cal, rms=0.073790Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.234 mas, bmaj=6.809 mas, bpa=12.9 degrees ! Estimated noise=624.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231292 Jy ! Component: 100 - total flux cleaned = 0.00312233 Jy ! Component: 150 - total flux cleaned = 0.00332254 Jy ! Component: 200 - total flux cleaned = 0.00342541 Jy ! Total flux subtracted in 200 components = 0.00342541 Jy ! Clean residual min=-0.002304 max=0.003368 Jy/beam ! Clean residual mean=0.000012 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.120391 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.120391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073699Jy sigma=0.000708 ! Fit after self-cal, rms=0.071818Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314377 Jy ! Component: 100 - total flux cleaned = 0.00433794 Jy ! Component: 150 - total flux cleaned = 0.00455342 Jy ! Component: 200 - total flux cleaned = 0.00464637 Jy ! Total flux subtracted in 200 components = 0.00464637 Jy ! Clean residual min=-0.002393 max=0.002929 Jy/beam ! Clean residual mean=0.000013 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.125037 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.125037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071655Jy sigma=0.000699 ! Fit after self-cal, rms=0.071623Jy sigma=0.000699 ! Inverting map ! Added new window around map position (75, 125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235602 Jy ! Component: 100 - total flux cleaned = 0.00279267 Jy ! Component: 150 - total flux cleaned = 0.00321436 Jy ! Component: 200 - total flux cleaned = 0.003354 Jy ! Total flux subtracted in 200 components = 0.003354 Jy ! Clean residual min=-0.002183 max=0.002403 Jy/beam ! Clean residual mean=0.000011 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.128391 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 0.128391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071493Jy sigma=0.000697 ! Fit after self-cal, rms=0.071476Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071476Jy sigma=0.000697 ! Fit after self-cal, rms=0.069109Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.182 mas, bmaj=6.767 mas, bpa=12.74 degrees ! Estimated noise=625.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187427 Jy ! Component: 100 - total flux cleaned = 0.00279871 Jy ! Component: 150 - total flux cleaned = 0.00326086 Jy ! Component: 200 - total flux cleaned = 0.00363281 Jy ! Total flux subtracted in 200 components = 0.00363281 Jy ! Clean residual min=-0.001999 max=0.001899 Jy/beam ! Clean residual mean=0.000010 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.132024 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 88 components and 0.132024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069034Jy sigma=0.000695 ! Fit after self-cal, rms=0.068983Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393227 Jy ! Component: 100 - total flux cleaned = 0.00042834 Jy ! Component: 150 - total flux cleaned = 0.000493686 Jy ! Component: 200 - total flux cleaned = 0.000553995 Jy ! Total flux subtracted in 200 components = 0.000553995 Jy ! Clean residual min=-0.001902 max=0.001863 Jy/beam ! Clean residual mean=0.000010 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.132578 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 98 components and 0.132578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068950Jy sigma=0.000694 ! Fit after self-cal, rms=0.068947Jy sigma=0.000694 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068947Jy sigma=0.000694 ! Fit after self-cal, rms=0.068652Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.185 mas, bmaj=9.611 mas, bpa=26.98 degrees ! Estimated noise=700.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139965 Jy ! Component: 100 - total flux cleaned = 0.00227158 Jy ! Component: 150 - total flux cleaned = 0.00286752 Jy ! Component: 200 - total flux cleaned = 0.00298675 Jy ! Total flux subtracted in 200 components = 0.00298675 Jy ! Clean residual min=-0.001810 max=0.001959 Jy/beam ! Clean residual mean=0.000019 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.135565 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 125 components and 0.135565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068628Jy sigma=0.000694 ! Fit after self-cal, rms=0.068615Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374469 Jy ! Component: 100 - total flux cleaned = 0.000425959 Jy ! Component: 150 - total flux cleaned = 0.000486309 Jy ! Component: 200 - total flux cleaned = 0.000553414 Jy ! Total flux subtracted in 200 components = 0.000553414 Jy ! Clean residual min=-0.001753 max=0.001977 Jy/beam ! Clean residual mean=0.000020 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.136118 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 136 components and 0.136118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068611Jy sigma=0.000694 ! Fit after self-cal, rms=0.068610Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=6.746 mas, bpa=12.72 degrees ! Estimated noise=627.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.157 x 6.746 at 12.72 degrees (North through East) ! Clean map min=-0.0017581 max=0.12876 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=5.948 mas, bpa=10.13 degrees ! Estimated noise=863.147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101412 Jy ! Component: 100 - total flux cleaned = 0.123526 Jy ! Component: 150 - total flux cleaned = 0.127829 Jy ! Component: 200 - total flux cleaned = 0.128749 Jy ! Total flux subtracted in 200 components = 0.128749 Jy ! Clean residual min=-0.003949 max=0.003941 Jy/beam ! Clean residual mean=0.000008 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.128749 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.128749 Jy ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=6.746 mas, bpa=12.72 degrees ! Estimated noise=627.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028702 Jy ! Component: 100 - total flux cleaned = 0.00422098 Jy ! Component: 150 - total flux cleaned = 0.00505658 Jy ! Component: 200 - total flux cleaned = 0.00596944 Jy ! Total flux subtracted in 200 components = 0.00596944 Jy ! Clean residual min=-0.002377 max=0.002058 Jy/beam ! Clean residual mean=0.000011 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.134718 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 40 components and 0.134718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.185 mas, bmaj=9.611 mas, bpa=26.98 degrees ! Estimated noise=700.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138479 Jy ! Component: 100 - total flux cleaned = 0.00167414 Jy ! Component: 150 - total flux cleaned = 0.00209942 Jy ! Component: 200 - total flux cleaned = 0.00222247 Jy ! Total flux subtracted in 200 components = 0.00222247 Jy ! Clean residual min=-0.001713 max=0.002141 Jy/beam ! Clean residual mean=0.000022 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.136941 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010601 Jy ! Component: 100 - total flux cleaned = 0.000169244 Jy ! Component: 150 - total flux cleaned = 0.000198537 Jy ! Component: 200 - total flux cleaned = 0.000227163 Jy ! Total flux subtracted in 200 components = 0.000227163 Jy ! Clean residual min=-0.001764 max=0.002109 Jy/beam ! Clean residual mean=0.000022 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.137168 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 82 components and 0.137168 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=6.746 mas, bpa=12.72 degrees ! Estimated noise=627.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241535 Jy ! Component: 100 - total flux cleaned = 5.92994e-05 Jy ! Component: 150 - total flux cleaned = -0.000102521 Jy ! Component: 200 - total flux cleaned = -0.000244814 Jy ! Total flux subtracted in 200 components = -0.000244814 Jy ! Clean residual min=-0.002146 max=0.001804 Jy/beam ! Clean residual mean=0.000011 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.136923 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.136923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068680Jy sigma=0.000694 ! Fit after self-cal, rms=0.068678Jy sigma=0.000694 wmodel J1209+4119_S_2017_05_01_pus_map.mod ! Writing 96 model components to file: J1209+4119_S_2017_05_01_pus_map.mod wobs J1209+4119_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1209+4119_S_2017_05_01_pus_uvs.fits wwins J1209+4119_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1209+4119_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000702214 Jy ! Component: 100 - total flux cleaned = -0.000860871 Jy ! Component: 150 - total flux cleaned = -0.00107157 Jy ! Component: 200 - total flux cleaned = -0.00118713 Jy ! Component: 250 - total flux cleaned = -0.00132638 Jy ! Component: 300 - total flux cleaned = -0.00143504 Jy ! Component: 350 - total flux cleaned = -0.00146159 Jy ! Component: 400 - total flux cleaned = -0.0015139 Jy ! Component: 450 - total flux cleaned = -0.00161576 Jy ! Component: 500 - total flux cleaned = -0.00164059 Jy ! Component: 550 - total flux cleaned = -0.00171392 Jy ! Component: 600 - total flux cleaned = -0.00169001 Jy ! Component: 650 - total flux cleaned = -0.0017138 Jy ! Component: 700 - total flux cleaned = -0.00171388 Jy ! Component: 750 - total flux cleaned = -0.00173632 Jy ! Component: 800 - total flux cleaned = -0.00169142 Jy ! Component: 850 - total flux cleaned = -0.00175747 Jy ! Component: 900 - total flux cleaned = -0.00175776 Jy ! Component: 950 - total flux cleaned = -0.0018001 Jy ! Component: 1000 - total flux cleaned = -0.00182095 Jy ! Component: 1050 - total flux cleaned = -0.0018419 Jy ! Component: 1100 - total flux cleaned = -0.00192348 Jy ! Component: 1150 - total flux cleaned = -0.00190291 Jy ! Component: 1200 - total flux cleaned = -0.00190322 Jy ! Component: 1250 - total flux cleaned = -0.00198179 Jy ! Component: 1300 - total flux cleaned = -0.00203988 Jy ! Component: 1350 - total flux cleaned = -0.00200168 Jy ! Component: 1400 - total flux cleaned = -0.00203942 Jy ! Component: 1450 - total flux cleaned = -0.00213299 Jy ! Component: 1500 - total flux cleaned = -0.0022443 Jy ! Component: 1550 - total flux cleaned = -0.0022624 Jy ! Component: 1600 - total flux cleaned = -0.00233473 Jy ! Component: 1650 - total flux cleaned = -0.00237082 Jy ! Component: 1700 - total flux cleaned = -0.00249482 Jy ! Component: 1750 - total flux cleaned = -0.00256512 Jy ! Component: 1800 - total flux cleaned = -0.00268673 Jy ! Component: 1850 - total flux cleaned = -0.00273819 Jy ! Component: 1900 - total flux cleaned = -0.0028063 Jy ! Component: 1950 - total flux cleaned = -0.00287357 Jy ! Component: 2000 - total flux cleaned = -0.00287342 Jy ! Component: 2050 - total flux cleaned = -0.00289006 Jy ! Component: 2100 - total flux cleaned = -0.00290647 Jy ! Component: 2150 - total flux cleaned = -0.00290633 Jy ! Component: 2200 - total flux cleaned = -0.00293852 Jy ! Component: 2250 - total flux cleaned = -0.00297039 Jy ! Component: 2300 - total flux cleaned = -0.00290722 Jy ! Component: 2350 - total flux cleaned = -0.00293871 Jy ! Component: 2400 - total flux cleaned = -0.00293889 Jy ! Component: 2450 - total flux cleaned = -0.00295438 Jy ! Component: 2500 - total flux cleaned = -0.00296966 Jy ! Component: 2550 - total flux cleaned = -0.00295471 Jy ! Component: 2600 - total flux cleaned = -0.00301452 Jy ! Component: 2650 - total flux cleaned = -0.00299958 Jy ! Component: 2700 - total flux cleaned = -0.00302897 Jy ! Component: 2750 - total flux cleaned = -0.00304357 Jy ! Component: 2800 - total flux cleaned = -0.00305811 Jy ! Component: 2850 - total flux cleaned = -0.00310112 Jy ! Component: 2900 - total flux cleaned = -0.00297277 Jy ! Component: 2950 - total flux cleaned = -0.00297293 Jy ! Component: 3000 - total flux cleaned = -0.00301504 Jy ! Component: 3050 - total flux cleaned = -0.00300095 Jy ! Component: 3100 - total flux cleaned = -0.00305635 Jy ! Component: 3150 - total flux cleaned = -0.00302868 Jy ! Component: 3200 - total flux cleaned = -0.00300148 Jy ! Component: 3250 - total flux cleaned = -0.00298805 Jy ! Component: 3300 - total flux cleaned = -0.00300138 Jy ! Component: 3350 - total flux cleaned = -0.00298793 Jy ! Component: 3400 - total flux cleaned = -0.00297466 Jy ! Component: 3450 - total flux cleaned = -0.00292206 Jy ! Component: 3500 - total flux cleaned = -0.00294818 Jy ! Component: 3550 - total flux cleaned = -0.0028704 Jy ! Component: 3600 - total flux cleaned = -0.00287047 Jy ! Component: 3650 - total flux cleaned = -0.00287049 Jy ! Component: 3700 - total flux cleaned = -0.00287047 Jy ! Component: 3750 - total flux cleaned = -0.00279482 Jy ! Component: 3800 - total flux cleaned = -0.0028324 Jy ! Component: 3850 - total flux cleaned = -0.00282013 Jy ! Component: 3900 - total flux cleaned = -0.00282012 Jy ! Component: 3950 - total flux cleaned = -0.00278324 Jy ! Component: 4000 - total flux cleaned = -0.00277109 Jy ! Component: 4050 - total flux cleaned = -0.00279531 Jy ! Total flux subtracted in 4096 components = -0.00277108 Jy ! Clean residual min=-0.000729 max=0.000677 Jy/beam ! Clean residual mean=0.000003 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.134152 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 377 components and 0.134152 Jy ![Exited script file: muppet] wmap "J1209+4119_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.157 x 6.746 at 12.72 degrees (North through East) ! Clean map min=-0.001631 max=0.12814 Jy/beam ! Writing clean map to FITS file: J1209+4119_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000219164 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.513099 0.513099 1.0262 2.05239 4.10479 8.20958 16.4192 32.8383 65.6766 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.157 x 6.746 at 12.72 degrees (North through East) ! Clean map min=-0.001631 max=0.12814 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1209+4119_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:35:01 2019