! Started logfile: J1209+2547_S_2017_05_01_pus_uvs.log on Wed May 1 18:34:51 2019 obs J1209+2547_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1209+2547_S_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964717 visibilities/baseline/integration-bin. ! Found source: J1209+2547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1209+2547_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 505 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.867776Jy sigma=0.020455 ! Fit after self-cal, rms=0.863199Jy sigma=0.020344 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=6.153 mas, bpa=-9.078 degrees ! Estimated noise=743.743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0891218 Jy ! Component: 100 - total flux cleaned = 0.119255 Jy ! Total flux subtracted in 100 components = 0.119255 Jy ! Clean residual min=-0.020672 max=0.030760 Jy/beam ! Clean residual mean=-0.000085 rms=0.006074 Jy/beam ! Combined flux in latest and established models = 0.119255 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.119255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117491Jy sigma=0.002224 ! Fit after self-cal, rms=0.117405Jy sigma=0.002224 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=7.052 mas, bpa=-6.082 degrees ! Estimated noise=503.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249152 Jy ! Component: 100 - total flux cleaned = 0.0284059 Jy ! Component: 150 - total flux cleaned = 0.0315691 Jy ! Component: 200 - total flux cleaned = 0.0334636 Jy ! Total flux subtracted in 200 components = 0.0334636 Jy ! Clean residual min=-0.018236 max=0.021905 Jy/beam ! Clean residual mean=-0.000158 rms=0.005741 Jy/beam ! Combined flux in latest and established models = 0.152719 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.152719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104575Jy sigma=0.002472 ! Fit after self-cal, rms=0.103003Jy sigma=0.002466 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.69 HN 1.02 KP 0.82 ! LA 0.80 MK 1.01 NL 1.04 OV 0.85 ! PT 0.76 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.73 HN 1.04 KP 0.80 ! LA 0.78 MK 0.99 NL 1.10 OV 1.00 ! PT 0.74 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.76 HN 1.04 KP 0.82 ! LA 0.81 MK 1.00 NL 1.11 OV 0.82 ! PT 0.74 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.79 HN 1.04 KP 1.00* ! LA 17.91 MK 1.10 NL 1.00* OV 1.00* ! PT 0.77 SC 1.00* ! ! ! Fit before self-cal, rms=0.103003Jy sigma=0.002466 ! Fit after self-cal, rms=0.344009Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=6.973 mas, bpa=-2.85 degrees ! Estimated noise=485.734 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127233 Jy ! Component: 100 - total flux cleaned = 0.015087 Jy ! Component: 150 - total flux cleaned = 0.0156643 Jy ! Component: 200 - total flux cleaned = 0.0158056 Jy ! Total flux subtracted in 200 components = 0.0158056 Jy ! Clean residual min=-0.004726 max=0.007413 Jy/beam ! Clean residual mean=0.000016 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.168524 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.168524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343305Jy sigma=0.000746 ! Fit after self-cal, rms=0.343571Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.343571Jy sigma=0.000732 ! Fit after self-cal, rms=0.069040Jy sigma=0.000704 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.808 mas, bmaj=6.877 mas, bpa=-3.846 degrees ! Estimated noise=480.691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00622289 Jy ! Component: 100 - total flux cleaned = 0.0071481 Jy ! Component: 150 - total flux cleaned = 0.00774235 Jy ! Component: 200 - total flux cleaned = 0.00812835 Jy ! Total flux subtracted in 200 components = 0.00812835 Jy ! Clean residual min=-0.003187 max=0.005818 Jy/beam ! Clean residual mean=0.000004 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.176653 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.176653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068341Jy sigma=0.000695 ! Fit after self-cal, rms=0.068009Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593193 Jy ! Component: 100 - total flux cleaned = 0.00930737 Jy ! Component: 150 - total flux cleaned = 0.0101427 Jy ! Component: 200 - total flux cleaned = 0.0104059 Jy ! Total flux subtracted in 200 components = 0.0104059 Jy ! Clean residual min=-0.002519 max=0.003011 Jy/beam ! Clean residual mean=0.000002 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.187059 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 89 components and 0.187059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067439Jy sigma=0.000685 ! Fit after self-cal, rms=0.067318Jy sigma=0.000684 ! Inverting map ! Added new window around map position (-20, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239062 Jy ! Component: 100 - total flux cleaned = 0.00345727 Jy ! Component: 150 - total flux cleaned = 0.00414171 Jy ! Component: 200 - total flux cleaned = 0.00448159 Jy ! Total flux subtracted in 200 components = 0.00448159 Jy ! Clean residual min=-0.002215 max=0.002701 Jy/beam ! Clean residual mean=0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.19154 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 109 components and 0.19154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067105Jy sigma=0.000681 ! Fit after self-cal, rms=0.067057Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067057Jy sigma=0.000681 ! Fit after self-cal, rms=0.065329Jy sigma=0.000678 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=6.87 mas, bpa=-3.929 degrees ! Estimated noise=476.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249176 Jy ! Component: 100 - total flux cleaned = 0.00372612 Jy ! Component: 150 - total flux cleaned = 0.00471411 Jy ! Component: 200 - total flux cleaned = 0.005323 Jy ! Total flux subtracted in 200 components = 0.005323 Jy ! Clean residual min=-0.001954 max=0.002168 Jy/beam ! Clean residual mean=0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.196863 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 118 components and 0.196863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065139Jy sigma=0.000676 ! Fit after self-cal, rms=0.065068Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-51, -100.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207197 Jy ! Component: 100 - total flux cleaned = 0.00308689 Jy ! Component: 150 - total flux cleaned = 0.00405425 Jy ! Component: 200 - total flux cleaned = 0.00485805 Jy ! Total flux subtracted in 200 components = 0.00485805 Jy ! Clean residual min=-0.001763 max=0.001859 Jy/beam ! Clean residual mean=0.000000 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.201721 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 135 components and 0.201721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064954Jy sigma=0.000674 ! Fit after self-cal, rms=0.064931Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064931Jy sigma=0.000674 ! Fit after self-cal, rms=0.064354Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.882 mas, bmaj=10.2 mas, bpa=-0.4495 degrees ! Estimated noise=542.948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243243 Jy ! Component: 100 - total flux cleaned = 0.00325307 Jy ! Component: 150 - total flux cleaned = 0.00403271 Jy ! Component: 200 - total flux cleaned = 0.00463807 Jy ! Total flux subtracted in 200 components = 0.00463807 Jy ! Clean residual min=-0.001376 max=0.001582 Jy/beam ! Clean residual mean=0.000000 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.206359 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 167 components and 0.206359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064296Jy sigma=0.000672 ! Fit after self-cal, rms=0.064261Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568185 Jy ! Component: 100 - total flux cleaned = 0.00115903 Jy ! Component: 150 - total flux cleaned = 0.00152033 Jy ! Component: 200 - total flux cleaned = 0.00172083 Jy ! Total flux subtracted in 200 components = 0.00172083 Jy ! Clean residual min=-0.001350 max=0.001542 Jy/beam ! Clean residual mean=0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.20808 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 183 components and 0.20808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064234Jy sigma=0.000672 ! Fit after self-cal, rms=0.064223Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=6.857 mas, bpa=-4.076 degrees ! Estimated noise=475.544 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.787 x 6.857 at -4.076 degrees (North through East) ! Clean map min=-0.0028522 max=0.10343 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=5.97 mas, bpa=-5.779 degrees ! Estimated noise=722.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0880351 Jy ! Component: 100 - total flux cleaned = 0.128026 Jy ! Component: 150 - total flux cleaned = 0.151041 Jy ! Component: 200 - total flux cleaned = 0.16528 Jy ! Total flux subtracted in 200 components = 0.16528 Jy ! Clean residual min=-0.004228 max=0.007468 Jy/beam ! Clean residual mean=-0.000002 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.16528 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.16528 Jy ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=6.857 mas, bpa=-4.076 degrees ! Estimated noise=475.544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101588 Jy ! Component: 100 - total flux cleaned = 0.0173846 Jy ! Component: 150 - total flux cleaned = 0.0228808 Jy ! Component: 200 - total flux cleaned = 0.0272401 Jy ! Total flux subtracted in 200 components = 0.0272401 Jy ! Clean residual min=-0.002150 max=0.002602 Jy/beam ! Clean residual mean=0.000003 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.19252 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 51 components and 0.19252 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353015 Jy ! Component: 100 - total flux cleaned = 0.00644583 Jy ! Component: 150 - total flux cleaned = 0.00796246 Jy ! Component: 200 - total flux cleaned = 0.0091385 Jy ! Total flux subtracted in 200 components = 0.0091385 Jy ! Clean residual min=-0.001797 max=0.001796 Jy/beam ! Clean residual mean=0.000002 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.201659 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 75 components and 0.201659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.882 mas, bmaj=10.2 mas, bpa=-0.4495 degrees ! Estimated noise=542.948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279644 Jy ! Component: 100 - total flux cleaned = 0.00439511 Jy ! Component: 150 - total flux cleaned = 0.00533384 Jy ! Component: 200 - total flux cleaned = 0.00597856 Jy ! Total flux subtracted in 200 components = 0.00597856 Jy ! Clean residual min=-0.001584 max=0.001497 Jy/beam ! Clean residual mean=0.000002 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.207638 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607348 Jy ! Component: 100 - total flux cleaned = 0.00109861 Jy ! Component: 150 - total flux cleaned = 0.00156893 Jy ! Component: 200 - total flux cleaned = 0.00182975 Jy ! Total flux subtracted in 200 components = 0.00182975 Jy ! Clean residual min=-0.001456 max=0.001483 Jy/beam ! Clean residual mean=0.000001 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.209467 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 155 components and 0.209467 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=6.857 mas, bpa=-4.076 degrees ! Estimated noise=475.544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037089 Jy ! Component: 100 - total flux cleaned = -0.000372448 Jy ! Component: 150 - total flux cleaned = -0.000376496 Jy ! Component: 200 - total flux cleaned = -0.000250435 Jy ! Total flux subtracted in 200 components = -0.000250435 Jy ! Clean residual min=-0.001452 max=0.001521 Jy/beam ! Clean residual mean=0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.209217 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 168 components and 0.209217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064316Jy sigma=0.000672 ! Fit after self-cal, rms=0.064276Jy sigma=0.000672 wmodel J1209+2547_S_2017_05_01_pus_map.mod ! Writing 168 model components to file: J1209+2547_S_2017_05_01_pus_map.mod wobs J1209+2547_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1209+2547_S_2017_05_01_pus_uvs.fits wwins J1209+2547_S_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J1209+2547_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349278 Jy ! Component: 100 - total flux cleaned = 0.000751551 Jy ! Component: 150 - total flux cleaned = 0.00106376 Jy ! Component: 200 - total flux cleaned = 0.00131774 Jy ! Component: 250 - total flux cleaned = 0.00158564 Jy ! Component: 300 - total flux cleaned = 0.00180295 Jy ! Component: 350 - total flux cleaned = 0.00193014 Jy ! Component: 400 - total flux cleaned = 0.00207571 Jy ! Component: 450 - total flux cleaned = 0.00225853 Jy ! Component: 500 - total flux cleaned = 0.0023581 Jy ! Component: 550 - total flux cleaned = 0.00241681 Jy ! Component: 600 - total flux cleaned = 0.00249422 Jy ! Component: 650 - total flux cleaned = 0.00249462 Jy ! Component: 700 - total flux cleaned = 0.00255079 Jy ! Component: 750 - total flux cleaned = 0.00262418 Jy ! Component: 800 - total flux cleaned = 0.00262418 Jy ! Component: 850 - total flux cleaned = 0.00267796 Jy ! Component: 900 - total flux cleaned = 0.00273119 Jy ! Component: 950 - total flux cleaned = 0.00281834 Jy ! Component: 1000 - total flux cleaned = 0.00285262 Jy ! Component: 1050 - total flux cleaned = 0.00290393 Jy ! Component: 1100 - total flux cleaned = 0.002971 Jy ! Component: 1150 - total flux cleaned = 0.00300453 Jy ! Component: 1200 - total flux cleaned = 0.00308682 Jy ! Component: 1250 - total flux cleaned = 0.00310295 Jy ! Component: 1300 - total flux cleaned = 0.00319946 Jy ! Component: 1350 - total flux cleaned = 0.00324721 Jy ! Component: 1400 - total flux cleaned = 0.00335713 Jy ! Component: 1450 - total flux cleaned = 0.00335698 Jy ! Component: 1500 - total flux cleaned = 0.00347998 Jy ! Component: 1550 - total flux cleaned = 0.00352563 Jy ! Component: 1600 - total flux cleaned = 0.00358591 Jy ! Component: 1650 - total flux cleaned = 0.00361573 Jy ! Component: 1700 - total flux cleaned = 0.00370439 Jy ! Component: 1750 - total flux cleaned = 0.00377739 Jy ! Component: 1800 - total flux cleaned = 0.00382093 Jy ! Component: 1850 - total flux cleaned = 0.00387823 Jy ! Component: 1900 - total flux cleaned = 0.00394947 Jy ! Component: 1950 - total flux cleaned = 0.00401984 Jy ! Component: 2000 - total flux cleaned = 0.00406173 Jy ! Component: 2050 - total flux cleaned = 0.00414482 Jy ! Component: 2100 - total flux cleaned = 0.00421325 Jy ! Component: 2150 - total flux cleaned = 0.00425401 Jy ! Component: 2200 - total flux cleaned = 0.00433487 Jy ! Component: 2250 - total flux cleaned = 0.00440161 Jy ! Component: 2300 - total flux cleaned = 0.00449441 Jy ! Component: 2350 - total flux cleaned = 0.00450749 Jy ! Component: 2400 - total flux cleaned = 0.00454676 Jy ! Component: 2450 - total flux cleaned = 0.00463734 Jy ! Component: 2500 - total flux cleaned = 0.00471423 Jy ! Component: 2550 - total flux cleaned = 0.00476522 Jy ! Component: 2600 - total flux cleaned = 0.00480291 Jy ! Component: 2650 - total flux cleaned = 0.00486545 Jy ! Component: 2700 - total flux cleaned = 0.00492752 Jy ! Component: 2750 - total flux cleaned = 0.00490303 Jy ! Component: 2800 - total flux cleaned = 0.00497639 Jy ! Component: 2850 - total flux cleaned = 0.00497655 Jy ! Component: 2900 - total flux cleaned = 0.0050367 Jy ! Component: 2950 - total flux cleaned = 0.00504865 Jy ! Component: 3000 - total flux cleaned = 0.00509602 Jy ! Component: 3050 - total flux cleaned = 0.00511985 Jy ! Component: 3100 - total flux cleaned = 0.00516665 Jy ! Component: 3150 - total flux cleaned = 0.00518991 Jy ! Component: 3200 - total flux cleaned = 0.00515524 Jy ! Component: 3250 - total flux cleaned = 0.00516686 Jy ! Component: 3300 - total flux cleaned = 0.00521232 Jy ! Component: 3350 - total flux cleaned = 0.00521224 Jy ! Component: 3400 - total flux cleaned = 0.00524585 Jy ! Component: 3450 - total flux cleaned = 0.00524577 Jy ! Component: 3500 - total flux cleaned = 0.00526774 Jy ! Component: 3550 - total flux cleaned = 0.00521276 Jy ! Component: 3600 - total flux cleaned = 0.00518002 Jy ! Component: 3650 - total flux cleaned = 0.00512577 Jy ! Component: 3700 - total flux cleaned = 0.0051258 Jy ! Component: 3750 - total flux cleaned = 0.00510439 Jy ! Component: 3800 - total flux cleaned = 0.00512576 Jy ! Component: 3850 - total flux cleaned = 0.00506234 Jy ! Component: 3900 - total flux cleaned = 0.00505199 Jy ! Component: 3950 - total flux cleaned = 0.00504156 Jy ! Component: 4000 - total flux cleaned = 0.00502083 Jy ! Component: 4050 - total flux cleaned = 0.00502076 Jy ! Total flux subtracted in 4096 components = 0.00502074 Jy ! Clean residual min=-0.000708 max=0.000601 Jy/beam ! Clean residual mean=-0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.214238 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 449 components and 0.214238 Jy ![Exited script file: muppet] wmap "J1209+2547_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.787 x 6.857 at -4.076 degrees (North through East) ! Clean map min=-0.0014946 max=0.10258 Jy/beam ! Writing clean map to FITS file: J1209+2547_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102578 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190563 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.55732 0.55732 1.11464 2.22928 4.45856 8.91712 17.8342 35.6685 71.3369 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.787 x 6.857 at -4.076 degrees (North through East) ! Clean map min=-0.0014946 max=0.10258 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1209+2547_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:34:57 2019