! Started logfile: J1204+4856_S_2017_10_09_pus_uvs.log on Sun May 12 13:11:55 2019 obs J1204+4856_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1204+4856_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.547374 visibilities/baseline/integration-bin. ! Found source: J1204+4856 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11508 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1204+4856_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 432 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 518 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 902 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992868Jy sigma=0.008928 ! Fit after self-cal, rms=0.955649Jy sigma=0.008619 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.359 mas, bmaj=4.819 mas, bpa=-32.61 degrees ! Estimated noise=1469.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362841 Jy ! Component: 100 - total flux cleaned = 0.0448563 Jy ! Total flux subtracted in 100 components = 0.0448563 Jy ! Clean residual min=-0.004818 max=0.005239 Jy/beam ! Clean residual mean=0.000011 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.0448563 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0448563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081052Jy sigma=0.000631 ! Fit after self-cal, rms=0.079905Jy sigma=0.000620 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.194 mas, bmaj=5.903 mas, bpa=-35.06 degrees ! Estimated noise=891.866 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040855 Jy ! Component: 100 - total flux cleaned = 0.00559529 Jy ! Component: 150 - total flux cleaned = 0.00575576 Jy ! Component: 200 - total flux cleaned = 0.00588248 Jy ! Total flux subtracted in 200 components = 0.00588248 Jy ! Clean residual min=-0.003328 max=0.003233 Jy/beam ! Clean residual mean=0.000021 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.0507388 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.0507388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079606Jy sigma=0.000619 ! Fit after self-cal, rms=0.079516Jy sigma=0.000619 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.06 KP 1.08 ! LA 0.93 MK 1.03 NL 0.92 OV 1.00* ! PT 1.24 ! ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.14 HN 0.97 KP 0.93 ! LA 0.93 MK 1.05 NL 1.00* OV 1.00* ! PT 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.08 HN 0.97 KP 0.93 ! LA 0.80 MK 1.08 NL 0.98 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.87 KP 1.00* ! LA 0.66 MK 0.88 NL 1.00* OV 1.00* ! PT 1.09 ! ! ! Fit before self-cal, rms=0.079516Jy sigma=0.000619 ! Fit after self-cal, rms=0.076074Jy sigma=0.000619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.144 mas, bmaj=5.82 mas, bpa=-34.89 degrees ! Estimated noise=903.903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.49206e-05 Jy ! Component: 100 - total flux cleaned = 9.55523e-05 Jy ! Component: 150 - total flux cleaned = 6.22964e-05 Jy ! Component: 200 - total flux cleaned = 6.38133e-05 Jy ! Total flux subtracted in 200 components = 6.38133e-05 Jy ! Clean residual min=-0.002359 max=0.002610 Jy/beam ! Clean residual mean=0.000014 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0508026 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.0508026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076037Jy sigma=0.000619 ! Fit after self-cal, rms=0.075849Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075849Jy sigma=0.000617 ! Fit after self-cal, rms=0.072887Jy sigma=0.000615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.149 mas, bmaj=5.814 mas, bpa=-35.92 degrees ! Estimated noise=899.594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291209 Jy ! Component: 100 - total flux cleaned = 0.000228136 Jy ! Component: 150 - total flux cleaned = 0.0001756 Jy ! Component: 200 - total flux cleaned = 0.000130819 Jy ! Total flux subtracted in 200 components = 0.000130819 Jy ! Clean residual min=-0.002289 max=0.002228 Jy/beam ! Clean residual mean=0.000008 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0509334 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.0509334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072876Jy sigma=0.000615 ! Fit after self-cal, rms=0.072871Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196162 Jy ! Component: 100 - total flux cleaned = 0.000179433 Jy ! Component: 150 - total flux cleaned = 0.000163765 Jy ! Component: 200 - total flux cleaned = 0.000137231 Jy ! Total flux subtracted in 200 components = 0.000137231 Jy ! Clean residual min=-0.002248 max=0.002218 Jy/beam ! Clean residual mean=0.000012 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0510707 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0510707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072865Jy sigma=0.000614 ! Fit after self-cal, rms=0.072821Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072821Jy sigma=0.000614 ! Fit after self-cal, rms=0.073473Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=5.842 mas, bpa=-36.46 degrees ! Estimated noise=902.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205199 Jy ! Component: 100 - total flux cleaned = 0.000205584 Jy ! Component: 150 - total flux cleaned = 0.000179546 Jy ! Component: 200 - total flux cleaned = 0.000168339 Jy ! Total flux subtracted in 200 components = 0.000168339 Jy ! Clean residual min=-0.002213 max=0.002308 Jy/beam ! Clean residual mean=0.000014 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.051239 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.051239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073466Jy sigma=0.000614 ! Fit after self-cal, rms=0.073517Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.35478e-05 Jy ! Component: 100 - total flux cleaned = 3.24222e-05 Jy ! Component: 150 - total flux cleaned = 3.19193e-05 Jy ! Component: 200 - total flux cleaned = 2.23279e-05 Jy ! Total flux subtracted in 200 components = 2.23279e-05 Jy ! Clean residual min=-0.002223 max=0.002338 Jy/beam ! Clean residual mean=0.000014 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0512613 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.0512613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073513Jy sigma=0.000614 ! Fit after self-cal, rms=0.073514Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073514Jy sigma=0.000614 ! Fit after self-cal, rms=0.074062Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.441 mas, bmaj=9.592 mas, bpa=76.97 degrees ! Estimated noise=1101.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.21772e-05 Jy ! Component: 100 - total flux cleaned = 6.20061e-05 Jy ! Component: 150 - total flux cleaned = 5.42839e-05 Jy ! Component: 200 - total flux cleaned = 3.59177e-05 Jy ! Total flux subtracted in 200 components = 3.59177e-05 Jy ! Clean residual min=-0.002677 max=0.002656 Jy/beam ! Clean residual mean=0.000026 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0512973 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.0512973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074061Jy sigma=0.000614 ! Fit after self-cal, rms=0.074091Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.51009e-05 Jy ! Component: 100 - total flux cleaned = 4.32011e-06 Jy ! Component: 150 - total flux cleaned = -9.99622e-06 Jy ! Component: 200 - total flux cleaned = -2.06007e-05 Jy ! Total flux subtracted in 200 components = -2.06007e-05 Jy ! Clean residual min=-0.002692 max=0.002638 Jy/beam ! Clean residual mean=0.000025 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0512767 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0512767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074091Jy sigma=0.000614 ! Fit after self-cal, rms=0.074095Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.129 mas, bmaj=5.861 mas, bpa=-36.76 degrees ! Estimated noise=905.677 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.129 x 5.861 at -36.76 degrees (North through East) ! Clean map min=-0.002082 max=0.046612 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=4.764 mas, bpa=-32.08 degrees ! Estimated noise=1432.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364391 Jy ! Component: 100 - total flux cleaned = 0.0455987 Jy ! Component: 150 - total flux cleaned = 0.0496178 Jy ! Component: 200 - total flux cleaned = 0.0502439 Jy ! Total flux subtracted in 200 components = 0.0502439 Jy ! Clean residual min=-0.003480 max=0.003749 Jy/beam ! Clean residual mean=0.000001 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.0502439 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0502439 Jy ! Inverting map and beam ! Estimated beam: bmin=4.129 mas, bmaj=5.861 mas, bpa=-36.76 degrees ! Estimated noise=905.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118979 Jy ! Component: 100 - total flux cleaned = 0.00127552 Jy ! Component: 150 - total flux cleaned = 0.00130967 Jy ! Component: 200 - total flux cleaned = 0.00128359 Jy ! Total flux subtracted in 200 components = 0.00128359 Jy ! Clean residual min=-0.002372 max=0.002364 Jy/beam ! Clean residual mean=0.000013 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0515275 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.0515275 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.441 mas, bmaj=9.592 mas, bpa=76.97 degrees ! Estimated noise=1101.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.07577e-05 Jy ! Component: 100 - total flux cleaned = -0.000125285 Jy ! Component: 150 - total flux cleaned = -0.000190755 Jy ! Component: 200 - total flux cleaned = -0.000228558 Jy ! Total flux subtracted in 200 components = -0.000228558 Jy ! Clean residual min=-0.002706 max=0.002654 Jy/beam ! Clean residual mean=0.000027 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.0512989 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.08183e-05 Jy ! Component: 100 - total flux cleaned = -5.54565e-05 Jy ! Component: 150 - total flux cleaned = -6.2598e-05 Jy ! Component: 200 - total flux cleaned = -7.50659e-05 Jy ! Total flux subtracted in 200 components = -7.50659e-05 Jy ! Clean residual min=-0.002711 max=0.002652 Jy/beam ! Clean residual mean=0.000026 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0512238 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0512238 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.129 mas, bmaj=5.861 mas, bpa=-36.76 degrees ! Estimated noise=905.677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13255e-05 Jy ! Component: 100 - total flux cleaned = 1.4019e-05 Jy ! Component: 150 - total flux cleaned = -4.68441e-06 Jy ! Component: 200 - total flux cleaned = -4.2639e-06 Jy ! Total flux subtracted in 200 components = -4.2639e-06 Jy ! Clean residual min=-0.002242 max=0.002385 Jy/beam ! Clean residual mean=0.000013 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0512196 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.0512196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074100Jy sigma=0.000614 ! Fit after self-cal, rms=0.074089Jy sigma=0.000614 wmodel J1204+4856_S_2017_10_09_pus_map.mod ! Writing 39 model components to file: J1204+4856_S_2017_10_09_pus_map.mod wobs J1204+4856_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1204+4856_S_2017_10_09_pus_uvs.fits wwins J1204+4856_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1204+4856_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000435528 Jy ! Component: 100 - total flux cleaned = 0.000656386 Jy ! Component: 150 - total flux cleaned = 0.000961164 Jy ! Component: 200 - total flux cleaned = 0.00137906 Jy ! Component: 250 - total flux cleaned = 0.0017459 Jy ! Component: 300 - total flux cleaned = 0.00198021 Jy ! Component: 350 - total flux cleaned = 0.00217581 Jy ! Component: 400 - total flux cleaned = 0.00241791 Jy ! Component: 450 - total flux cleaned = 0.00260031 Jy ! Component: 500 - total flux cleaned = 0.00292845 Jy ! Component: 550 - total flux cleaned = 0.00312398 Jy ! Component: 600 - total flux cleaned = 0.00340996 Jy ! Component: 650 - total flux cleaned = 0.00359472 Jy ! Component: 700 - total flux cleaned = 0.00382089 Jy ! Component: 750 - total flux cleaned = 0.00408535 Jy ! Component: 800 - total flux cleaned = 0.00436519 Jy ! Component: 850 - total flux cleaned = 0.00459617 Jy ! Component: 900 - total flux cleaned = 0.00482222 Jy ! Component: 950 - total flux cleaned = 0.00504324 Jy ! Component: 1000 - total flux cleaned = 0.00516125 Jy ! Component: 1050 - total flux cleaned = 0.0053552 Jy ! Component: 1100 - total flux cleaned = 0.00550726 Jy ! Component: 1150 - total flux cleaned = 0.00565753 Jy ! Component: 1200 - total flux cleaned = 0.00587906 Jy ! Component: 1250 - total flux cleaned = 0.00598793 Jy ! Component: 1300 - total flux cleaned = 0.0061666 Jy ! Component: 1350 - total flux cleaned = 0.00630696 Jy ! Component: 1400 - total flux cleaned = 0.00642812 Jy ! Component: 1450 - total flux cleaned = 0.00659807 Jy ! Component: 1500 - total flux cleaned = 0.00673184 Jy ! Component: 1550 - total flux cleaned = 0.006847 Jy ! Component: 1600 - total flux cleaned = 0.00692846 Jy ! Component: 1650 - total flux cleaned = 0.00702479 Jy ! Component: 1700 - total flux cleaned = 0.00716721 Jy ! Component: 1750 - total flux cleaned = 0.0072451 Jy ! Component: 1800 - total flux cleaned = 0.00732225 Jy ! Component: 1850 - total flux cleaned = 0.00741325 Jy ! Component: 1900 - total flux cleaned = 0.00744339 Jy ! Component: 1950 - total flux cleaned = 0.00750272 Jy ! Component: 2000 - total flux cleaned = 0.00757592 Jy ! Component: 2050 - total flux cleaned = 0.00764838 Jy ! Component: 2100 - total flux cleaned = 0.00773428 Jy ! Component: 2150 - total flux cleaned = 0.007805 Jy ! Component: 2200 - total flux cleaned = 0.00790282 Jy ! Component: 2250 - total flux cleaned = 0.00795815 Jy ! Component: 2300 - total flux cleaned = 0.00805408 Jy ! Component: 2350 - total flux cleaned = 0.00813562 Jy ! Component: 2400 - total flux cleaned = 0.00822976 Jy ! Component: 2450 - total flux cleaned = 0.00832306 Jy ! Component: 2500 - total flux cleaned = 0.0084289 Jy ! Component: 2550 - total flux cleaned = 0.00855993 Jy ! Component: 2600 - total flux cleaned = 0.00866396 Jy ! Component: 2650 - total flux cleaned = 0.0087801 Jy ! Component: 2700 - total flux cleaned = 0.008857 Jy ! Component: 2750 - total flux cleaned = 0.00900962 Jy ! Component: 2800 - total flux cleaned = 0.00913592 Jy ! Component: 2850 - total flux cleaned = 0.00924889 Jy ! Component: 2900 - total flux cleaned = 0.00941099 Jy ! Component: 2950 - total flux cleaned = 0.00952249 Jy ! Component: 3000 - total flux cleaned = 0.00963339 Jy ! Component: 3050 - total flux cleaned = 0.00978032 Jy ! Component: 3100 - total flux cleaned = 0.00986545 Jy ! Component: 3150 - total flux cleaned = 0.00999858 Jy ! Component: 3200 - total flux cleaned = 0.0100948 Jy ! Component: 3250 - total flux cleaned = 0.0102145 Jy ! Component: 3300 - total flux cleaned = 0.0102979 Jy ! Component: 3350 - total flux cleaned = 0.0103808 Jy ! Component: 3400 - total flux cleaned = 0.0104751 Jy ! Component: 3450 - total flux cleaned = 0.010569 Jy ! Component: 3500 - total flux cleaned = 0.0106624 Jy ! Component: 3550 - total flux cleaned = 0.010732 Jy ! Component: 3600 - total flux cleaned = 0.01079 Jy ! Component: 3650 - total flux cleaned = 0.0108937 Jy ! Component: 3700 - total flux cleaned = 0.010997 Jy ! Component: 3750 - total flux cleaned = 0.0110541 Jy ! Component: 3800 - total flux cleaned = 0.0111793 Jy ! Component: 3850 - total flux cleaned = 0.0112586 Jy ! Component: 3900 - total flux cleaned = 0.0113263 Jy ! Component: 3950 - total flux cleaned = 0.0114388 Jy ! Component: 4000 - total flux cleaned = 0.0115284 Jy ! Component: 4050 - total flux cleaned = 0.0116176 Jy ! Total flux subtracted in 4096 components = 0.0117177 Jy ! Clean residual min=-0.000708 max=0.000622 Jy/beam ! Clean residual mean=0.000005 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.0629372 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 326 components and 0.0629373 Jy ![Exited script file: muppet] wmap "J1204+4856_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.129 x 5.861 at -36.76 degrees (North through East) ! Clean map min=-0.0012915 max=0.046457 Jy/beam ! Writing clean map to FITS file: J1204+4856_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0464567 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183176 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.18288 1.18288 2.36576 4.73153 9.46306 18.9261 37.8522 75.7045 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.129 x 5.861 at -36.76 degrees (North through East) ! Clean map min=-0.0012915 max=0.046457 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1204+4856_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:12:00 2019