! Started logfile: J1203+4632_S_2017_04_28_pus_uvs.log on Thu May 2 16:24:38 2019 obs J1203+4632_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1203+4632_S_2017_04_28_pus_uva.fits ! AN table 1: 174 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98212 visibilities/baseline/integration-bin. ! Found source: J1203+4632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 30760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1203+4632_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 713 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895235Jy sigma=0.008009 ! Fit after self-cal, rms=0.884885Jy sigma=0.007925 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=4.33 mas, bpa=-6.482 degrees ! Estimated noise=895.166 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0852338 Jy ! Component: 100 - total flux cleaned = 0.117259 Jy ! Total flux subtracted in 100 components = 0.117259 Jy ! Clean residual min=-0.012514 max=0.038227 Jy/beam ! Clean residual mean=-0.000003 rms=0.003580 Jy/beam ! Combined flux in latest and established models = 0.117259 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.117259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114665Jy sigma=0.000980 ! Fit after self-cal, rms=0.114470Jy sigma=0.000977 ! Inverting map ! Added new window around map position (-4, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348391 Jy ! Component: 100 - total flux cleaned = 0.0528283 Jy ! Total flux subtracted in 100 components = 0.0528283 Jy ! Clean residual min=-0.009495 max=0.026877 Jy/beam ! Clean residual mean=0.000004 rms=0.002659 Jy/beam ! Combined flux in latest and established models = 0.170087 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.170087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101242Jy sigma=0.000842 ! Fit after self-cal, rms=0.099757Jy sigma=0.000829 ! Inverting map ! Added new window around map position (-8, -10.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254345 Jy ! Component: 100 - total flux cleaned = 0.0394759 Jy ! Total flux subtracted in 100 components = 0.0394759 Jy ! Clean residual min=-0.006049 max=0.010122 Jy/beam ! Clean residual mean=0.000006 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.209563 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.209563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092228Jy sigma=0.000752 ! Fit after self-cal, rms=0.091231Jy sigma=0.000743 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128195 Jy ! Component: 100 - total flux cleaned = 0.020704 Jy ! Total flux subtracted in 100 components = 0.020704 Jy ! Clean residual min=-0.004860 max=0.007525 Jy/beam ! Clean residual mean=0.000009 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.230267 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.230267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088973Jy sigma=0.000720 ! Fit after self-cal, rms=0.088757Jy sigma=0.000718 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.006 mas, bmaj=5.13 mas, bpa=-1.394 degrees ! Estimated noise=502.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110782 Jy ! Component: 100 - total flux cleaned = 0.0191719 Jy ! Component: 150 - total flux cleaned = 0.0257398 Jy ! Component: 200 - total flux cleaned = 0.031205 Jy ! Total flux subtracted in 200 components = 0.031205 Jy ! Clean residual min=-0.003794 max=0.006730 Jy/beam ! Clean residual mean=-0.000002 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 0.261472 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 87 components and 0.261472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086811Jy sigma=0.000698 ! Fit after self-cal, rms=0.086674Jy sigma=0.000697 ! Inverting map ! Added new window around map position (-10, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684362 Jy ! Component: 100 - total flux cleaned = 0.0118727 Jy ! Component: 150 - total flux cleaned = 0.0160908 Jy ! Component: 200 - total flux cleaned = 0.0196947 Jy ! Total flux subtracted in 200 components = 0.0196947 Jy ! Clean residual min=-0.002815 max=0.003358 Jy/beam ! Clean residual mean=0.000002 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.281167 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 120 components and 0.281167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085891Jy sigma=0.000689 ! Fit after self-cal, rms=0.085829Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.99 KP 0.96 ! LA 0.94 MK 1.03 NL 0.96 OV 1.01 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 1.09 KP 0.93 ! LA 0.92 MK 1.02 NL 1.01 OV 1.07 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.01 KP 0.99 ! LA 0.97 MK 1.06 NL 1.10 OV 0.96 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.04 HN 0.96 KP 1.00* ! LA 0.95 MK 0.96 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.085829Jy sigma=0.000688 ! Fit after self-cal, rms=0.084958Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=5.173 mas, bpa=-1.066 degrees ! Estimated noise=500.932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307475 Jy ! Component: 100 - total flux cleaned = 0.00486912 Jy ! Component: 150 - total flux cleaned = 0.00620713 Jy ! Component: 200 - total flux cleaned = 0.00722402 Jy ! Total flux subtracted in 200 components = 0.00722402 Jy ! Clean residual min=-0.002428 max=0.002293 Jy/beam ! Clean residual mean=-0.000006 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.288391 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 148 components and 0.288391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084785Jy sigma=0.000682 ! Fit after self-cal, rms=0.084765Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084765Jy sigma=0.000682 ! Fit after self-cal, rms=0.082482Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.058 mas, bmaj=5.168 mas, bpa=-1.947 degrees ! Estimated noise=497.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142505 Jy ! Component: 100 - total flux cleaned = 0.00225611 Jy ! Component: 150 - total flux cleaned = 0.00301272 Jy ! Component: 200 - total flux cleaned = 0.00354043 Jy ! Total flux subtracted in 200 components = 0.00354043 Jy ! Clean residual min=-0.002067 max=0.001792 Jy/beam ! Clean residual mean=0.000008 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.291931 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 167 components and 0.291931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082417Jy sigma=0.000676 ! Fit after self-cal, rms=0.082407Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506983 Jy ! Component: 100 - total flux cleaned = 0.000960078 Jy ! Component: 150 - total flux cleaned = 0.00114841 Jy ! Component: 200 - total flux cleaned = 0.00139341 Jy ! Total flux subtracted in 200 components = 0.00139341 Jy ! Clean residual min=-0.002023 max=0.001723 Jy/beam ! Clean residual mean=0.000008 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.293325 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 175 components and 0.293325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082373Jy sigma=0.000676 ! Fit after self-cal, rms=0.082369Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082369Jy sigma=0.000676 ! Fit after self-cal, rms=0.082213Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.068 mas, bmaj=5.164 mas, bpa=-1.988 degrees ! Estimated noise=496.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000684783 Jy ! Component: 100 - total flux cleaned = 0.00127972 Jy ! Component: 150 - total flux cleaned = 0.00173698 Jy ! Component: 200 - total flux cleaned = 0.00202363 Jy ! Total flux subtracted in 200 components = 0.00202363 Jy ! Clean residual min=-0.001814 max=0.001611 Jy/beam ! Clean residual mean=0.000007 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.295348 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 178 components and 0.295348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082183Jy sigma=0.000675 ! Fit after self-cal, rms=0.082179Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287017 Jy ! Component: 100 - total flux cleaned = 0.000498211 Jy ! Component: 150 - total flux cleaned = 0.000638965 Jy ! Component: 200 - total flux cleaned = 0.000771281 Jy ! Total flux subtracted in 200 components = 0.000771281 Jy ! Clean residual min=-0.001771 max=0.001555 Jy/beam ! Clean residual mean=0.000007 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.29612 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 185 components and 0.29612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082160Jy sigma=0.000675 ! Fit after self-cal, rms=0.082158Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082158Jy sigma=0.000675 ! Fit after self-cal, rms=0.082034Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.258 mas, bmaj=8.792 mas, bpa=28.36 degrees ! Estimated noise=596.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117348 Jy ! Component: 100 - total flux cleaned = 0.00166171 Jy ! Component: 150 - total flux cleaned = 0.00190692 Jy ! Component: 200 - total flux cleaned = 0.00203753 Jy ! Total flux subtracted in 200 components = 0.00203753 Jy ! Clean residual min=-0.001628 max=0.001874 Jy/beam ! Clean residual mean=0.000012 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.298157 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 203 components and 0.298157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082025Jy sigma=0.000675 ! Fit after self-cal, rms=0.082021Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165211 Jy ! Component: 100 - total flux cleaned = 0.000288566 Jy ! Component: 150 - total flux cleaned = 0.000374688 Jy ! Component: 200 - total flux cleaned = 0.000469674 Jy ! Total flux subtracted in 200 components = 0.000469674 Jy ! Clean residual min=-0.001592 max=0.001828 Jy/beam ! Clean residual mean=0.000012 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.298627 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 215 components and 0.298627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082018Jy sigma=0.000675 ! Fit after self-cal, rms=0.082015Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=5.161 mas, bpa=-1.936 degrees ! Estimated noise=495.755 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.073 x 5.161 at -1.936 degrees (North through East) ! Clean map min=-0.001591 max=0.10092 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=4.352 mas, bpa=-6.969 degrees ! Estimated noise=885.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0883255 Jy ! Component: 100 - total flux cleaned = 0.134512 Jy ! Component: 150 - total flux cleaned = 0.164551 Jy ! Component: 200 - total flux cleaned = 0.185094 Jy ! Total flux subtracted in 200 components = 0.185094 Jy ! Clean residual min=-0.005167 max=0.011392 Jy/beam ! Clean residual mean=0.000008 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.185094 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.185094 Jy ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=5.161 mas, bpa=-1.936 degrees ! Estimated noise=495.755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210284 Jy ! Component: 100 - total flux cleaned = 0.0352753 Jy ! Component: 150 - total flux cleaned = 0.0461612 Jy ! Component: 200 - total flux cleaned = 0.0551074 Jy ! Total flux subtracted in 200 components = 0.0551074 Jy ! Clean residual min=-0.003439 max=0.005459 Jy/beam ! Clean residual mean=0.000002 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.240202 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 84 components and 0.240202 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756227 Jy ! Component: 100 - total flux cleaned = 0.0140521 Jy ! Component: 150 - total flux cleaned = 0.0196556 Jy ! Component: 200 - total flux cleaned = 0.0245128 Jy ! Total flux subtracted in 200 components = 0.0245128 Jy ! Clean residual min=-0.002338 max=0.003582 Jy/beam ! Clean residual mean=0.000003 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.264715 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 131 components and 0.264715 Jy ! Inverting map ! Added new window around map position (-29, 17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434332 Jy ! Component: 100 - total flux cleaned = 0.00807717 Jy ! Component: 150 - total flux cleaned = 0.0113422 Jy ! Component: 200 - total flux cleaned = 0.0142059 Jy ! Total flux subtracted in 200 components = 0.0142059 Jy ! Clean residual min=-0.001799 max=0.002528 Jy/beam ! Clean residual mean=0.000004 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.27892 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 166 components and 0.278921 Jy ! Inverting map ! Added new window around map position (-20, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273729 Jy ! Component: 100 - total flux cleaned = 0.00501891 Jy ! Component: 150 - total flux cleaned = 0.00704568 Jy ! Component: 200 - total flux cleaned = 0.00885517 Jy ! Total flux subtracted in 200 components = 0.00885517 Jy ! Clean residual min=-0.001608 max=0.001478 Jy/beam ! Clean residual mean=0.000005 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.287776 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 204 components and 0.287776 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.258 mas, bmaj=8.792 mas, bpa=28.36 degrees ! Estimated noise=596.142 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276984 Jy ! Component: 100 - total flux cleaned = 0.00490925 Jy ! Component: 150 - total flux cleaned = 0.00661722 Jy ! Component: 200 - total flux cleaned = 0.00799596 Jy ! Total flux subtracted in 200 components = 0.00799596 Jy ! Clean residual min=-0.001462 max=0.001520 Jy/beam ! Clean residual mean=0.000011 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.295772 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011194 Jy ! Component: 100 - total flux cleaned = 0.00203553 Jy ! Component: 150 - total flux cleaned = 0.00279031 Jy ! Component: 200 - total flux cleaned = 0.00327328 Jy ! Total flux subtracted in 200 components = 0.00327328 Jy ! Clean residual min=-0.001339 max=0.001511 Jy/beam ! Clean residual mean=0.000011 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.299045 Jy ! Adding 162 model components to the UV plane model. ! The established model now contains 343 components and 0.299045 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=5.161 mas, bpa=-1.936 degrees ! Estimated noise=495.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.91878e-05 Jy ! Component: 100 - total flux cleaned = 0.000178635 Jy ! Component: 150 - total flux cleaned = 0.000384679 Jy ! Component: 200 - total flux cleaned = 0.000575606 Jy ! Total flux subtracted in 200 components = 0.000575606 Jy ! Clean residual min=-0.001657 max=0.001284 Jy/beam ! Clean residual mean=0.000005 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.29962 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 366 components and 0.29962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081955Jy sigma=0.000674 ! Fit after self-cal, rms=0.081924Jy sigma=0.000674 wmodel J1203+4632_S_2017_04_28_pus_map.mod ! Writing 366 model components to file: J1203+4632_S_2017_04_28_pus_map.mod wobs J1203+4632_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1203+4632_S_2017_04_28_pus_uvs.fits wwins J1203+4632_S_2017_04_28_pus_map.win ! wwins: Wrote 7 windows to J1203+4632_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425233 Jy ! Component: 100 - total flux cleaned = -0.000590711 Jy ! Component: 150 - total flux cleaned = -0.000636112 Jy ! Component: 200 - total flux cleaned = -0.000570746 Jy ! Component: 250 - total flux cleaned = -0.000571125 Jy ! Component: 300 - total flux cleaned = -0.00053046 Jy ! Component: 350 - total flux cleaned = -0.000510607 Jy ! Component: 400 - total flux cleaned = -0.000491128 Jy ! Component: 450 - total flux cleaned = -0.000491399 Jy ! Component: 500 - total flux cleaned = -0.000510274 Jy ! Component: 550 - total flux cleaned = -0.000417729 Jy ! Component: 600 - total flux cleaned = -0.0003269 Jy ! Component: 650 - total flux cleaned = -0.000238 Jy ! Component: 700 - total flux cleaned = -0.00015045 Jy ! Component: 750 - total flux cleaned = -0.000150264 Jy ! Component: 800 - total flux cleaned = -6.46136e-05 Jy ! Component: 850 - total flux cleaned = -3.06902e-05 Jy ! Component: 900 - total flux cleaned = 1.93086e-05 Jy ! Component: 950 - total flux cleaned = 8.48745e-05 Jy ! Component: 1000 - total flux cleaned = 0.000149545 Jy ! Component: 1050 - total flux cleaned = 0.000165658 Jy ! Component: 1100 - total flux cleaned = 0.000165885 Jy ! Component: 1150 - total flux cleaned = 0.000228736 Jy ! Component: 1200 - total flux cleaned = 0.000306377 Jy ! Component: 1250 - total flux cleaned = 0.000336882 Jy ! Component: 1300 - total flux cleaned = 0.000397452 Jy ! Component: 1350 - total flux cleaned = 0.000412636 Jy ! Component: 1400 - total flux cleaned = 0.000501187 Jy ! Component: 1450 - total flux cleaned = 0.000516061 Jy ! Component: 1500 - total flux cleaned = 0.000559794 Jy ! Component: 1550 - total flux cleaned = 0.000631107 Jy ! Component: 1600 - total flux cleaned = 0.000645222 Jy ! Component: 1650 - total flux cleaned = 0.000687225 Jy ! Component: 1700 - total flux cleaned = 0.000770327 Jy ! Component: 1750 - total flux cleaned = 0.000729127 Jy ! Component: 1800 - total flux cleaned = 0.000838378 Jy ! Component: 1850 - total flux cleaned = 0.000919364 Jy ! Component: 1900 - total flux cleaned = 0.000986117 Jy ! Component: 1950 - total flux cleaned = 0.00107868 Jy ! Component: 2000 - total flux cleaned = 0.00109171 Jy ! Component: 2050 - total flux cleaned = 0.00116967 Jy ! Component: 2100 - total flux cleaned = 0.0012211 Jy ! Component: 2150 - total flux cleaned = 0.00125963 Jy ! Component: 2200 - total flux cleaned = 0.00132289 Jy ! Component: 2250 - total flux cleaned = 0.00138581 Jy ! Component: 2300 - total flux cleaned = 0.00144818 Jy ! Component: 2350 - total flux cleaned = 0.00146059 Jy ! Component: 2400 - total flux cleaned = 0.00152193 Jy ! Component: 2450 - total flux cleaned = 0.00158294 Jy ! Component: 2500 - total flux cleaned = 0.00161925 Jy ! Component: 2550 - total flux cleaned = 0.00169131 Jy ! Component: 2600 - total flux cleaned = 0.00172704 Jy ! Component: 2650 - total flux cleaned = 0.00179792 Jy ! Component: 2700 - total flux cleaned = 0.00182138 Jy ! Component: 2750 - total flux cleaned = 0.00190302 Jy ! Component: 2800 - total flux cleaned = 0.00192607 Jy ! Component: 2850 - total flux cleaned = 0.0020177 Jy ! Component: 2900 - total flux cleaned = 0.0020404 Jy ! Component: 2950 - total flux cleaned = 0.00209692 Jy ! Component: 3000 - total flux cleaned = 0.00213061 Jy ! Component: 3050 - total flux cleaned = 0.00216415 Jy ! Component: 3100 - total flux cleaned = 0.00221971 Jy ! Component: 3150 - total flux cleaned = 0.00225271 Jy ! Component: 3200 - total flux cleaned = 0.00228562 Jy ! Component: 3250 - total flux cleaned = 0.00236164 Jy ! Component: 3300 - total flux cleaned = 0.00235087 Jy ! Component: 3350 - total flux cleaned = 0.00243662 Jy ! Component: 3400 - total flux cleaned = 0.00250055 Jy ! Component: 3450 - total flux cleaned = 0.00253214 Jy ! Component: 3500 - total flux cleaned = 0.00257424 Jy ! Component: 3550 - total flux cleaned = 0.00258469 Jy ! Component: 3600 - total flux cleaned = 0.00266773 Jy ! Component: 3650 - total flux cleaned = 0.00266768 Jy ! Component: 3700 - total flux cleaned = 0.00271908 Jy ! Component: 3750 - total flux cleaned = 0.00269869 Jy ! Component: 3800 - total flux cleaned = 0.00276964 Jy ! Component: 3850 - total flux cleaned = 0.00277965 Jy ! Component: 3900 - total flux cleaned = 0.00279974 Jy ! Component: 3950 - total flux cleaned = 0.00288947 Jy ! Component: 4000 - total flux cleaned = 0.00292904 Jy ! Component: 4050 - total flux cleaned = 0.00292902 Jy ! Total flux subtracted in 4096 components = 0.00296819 Jy ! Clean residual min=-0.000526 max=0.000558 Jy/beam ! Clean residual mean=0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.302589 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 677 components and 0.302589 Jy ![Exited script file: muppet] wmap "J1203+4632_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.073 x 5.161 at -1.936 degrees (North through East) ! Clean map min=-0.0013735 max=0.10171 Jy/beam ! Writing clean map to FITS file: J1203+4632_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101711 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000179039 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.528079 0.528079 1.05616 2.11232 4.22463 8.44927 16.8985 33.7971 67.5942 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.073 x 5.161 at -1.936 degrees (North through East) ! Clean map min=-0.0013735 max=0.10171 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1203+4632_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:24:45 2019