! Started logfile: J1202+0235_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:28 2019 obs J1202+0235_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1202+0235_S_2017_09_26_pus_uva.fits ! AN table 1: 176 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.86553 visibilities/baseline/integration-bin. ! Found source: J1202+0235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 21936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1202+0235_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1181 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000833Jy sigma=0.008105 ! Fit after self-cal, rms=0.950057Jy sigma=0.007703 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.916 mas, bmaj=14.54 mas, bpa=-18.5 degrees ! Estimated noise=1471.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0412098 Jy ! Component: 100 - total flux cleaned = 0.0516495 Jy ! Total flux subtracted in 100 components = 0.0516495 Jy ! Clean residual min=-0.004061 max=0.004479 Jy/beam ! Clean residual mean=-0.000006 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.0516495 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0516495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083610Jy sigma=0.000642 ! Fit after self-cal, rms=0.082240Jy sigma=0.000630 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.682 mas, bmaj=16.15 mas, bpa=-18.07 degrees ! Estimated noise=738.637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057721 Jy ! Component: 100 - total flux cleaned = 0.00828894 Jy ! Component: 150 - total flux cleaned = 0.00956756 Jy ! Component: 200 - total flux cleaned = 0.0102168 Jy ! Total flux subtracted in 200 components = 0.0102168 Jy ! Clean residual min=-0.001787 max=0.001855 Jy/beam ! Clean residual mean=-0.000004 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0618663 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.0618663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081874Jy sigma=0.000627 ! Fit after self-cal, rms=0.081820Jy sigma=0.000627 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.99 KP 0.98 ! LA 0.99 MK 1.11 NL 1.01 OV 1.04 ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 1.04 KP 0.97 ! LA 0.98 MK 1.08 NL 1.03 OV 1.08 ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.09 HN 1.04 KP 0.95 ! LA 0.93 MK 1.08 NL 0.94 OV 1.01 ! PT 1.02 ! ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.84 KP 1.00* ! LA 0.82 MK 0.75 NL 1.00* OV 1.39 ! PT 0.88 ! ! ! Fit before self-cal, rms=0.081820Jy sigma=0.000627 ! Fit after self-cal, rms=0.080754Jy sigma=0.000626 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=16.08 mas, bpa=-18.05 degrees ! Estimated noise=738.437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481283 Jy ! Component: 100 - total flux cleaned = 0.000482083 Jy ! Component: 150 - total flux cleaned = 0.000504241 Jy ! Component: 200 - total flux cleaned = 0.000524066 Jy ! Total flux subtracted in 200 components = 0.000524066 Jy ! Clean residual min=-0.001581 max=0.001600 Jy/beam ! Clean residual mean=0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0623903 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.0623903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080739Jy sigma=0.000626 ! Fit after self-cal, rms=0.080720Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080720Jy sigma=0.000626 ! Fit after self-cal, rms=0.080703Jy sigma=0.000626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.746 mas, bmaj=16.01 mas, bpa=-18.01 degrees ! Estimated noise=738.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466481 Jy ! Component: 100 - total flux cleaned = 0.000530539 Jy ! Component: 150 - total flux cleaned = 0.00048001 Jy ! Component: 200 - total flux cleaned = 0.000449264 Jy ! Total flux subtracted in 200 components = 0.000449264 Jy ! Clean residual min=-0.001638 max=0.001406 Jy/beam ! Clean residual mean=0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0628396 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.0628396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080694Jy sigma=0.000626 ! Fit after self-cal, rms=0.080697Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263 Jy ! Component: 100 - total flux cleaned = 0.000227896 Jy ! Component: 150 - total flux cleaned = 0.000180991 Jy ! Component: 200 - total flux cleaned = 0.000151565 Jy ! Total flux subtracted in 200 components = 0.000151565 Jy ! Clean residual min=-0.001552 max=0.001499 Jy/beam ! Clean residual mean=0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0629912 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0629912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080690Jy sigma=0.000625 ! Fit after self-cal, rms=0.080693Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080693Jy sigma=0.000625 ! Fit after self-cal, rms=0.080766Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=16 mas, bpa=-17.99 degrees ! Estimated noise=738.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484277 Jy ! Component: 100 - total flux cleaned = 0.000519543 Jy ! Component: 150 - total flux cleaned = 0.000489806 Jy ! Component: 200 - total flux cleaned = 0.00046221 Jy ! Total flux subtracted in 200 components = 0.00046221 Jy ! Clean residual min=-0.001548 max=0.001462 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0634534 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 67 components and 0.0634534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080759Jy sigma=0.000625 ! Fit after self-cal, rms=0.080767Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.68324e-05 Jy ! Component: 100 - total flux cleaned = -4.07531e-06 Jy ! Component: 150 - total flux cleaned = -4.30729e-05 Jy ! Component: 200 - total flux cleaned = -6.68013e-05 Jy ! Total flux subtracted in 200 components = -6.68013e-05 Jy ! Clean residual min=-0.001550 max=0.001482 Jy/beam ! Clean residual mean=0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0633866 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.0633866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080763Jy sigma=0.000625 ! Fit after self-cal, rms=0.080764Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080764Jy sigma=0.000625 ! Fit after self-cal, rms=0.080852Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.09 mas, bmaj=16.38 mas, bpa=-14.54 degrees ! Estimated noise=856.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141684 Jy ! Component: 100 - total flux cleaned = 0.000150718 Jy ! Component: 150 - total flux cleaned = 0.000144262 Jy ! Component: 200 - total flux cleaned = 0.000132138 Jy ! Total flux subtracted in 200 components = 0.000132138 Jy ! Clean residual min=-0.001456 max=0.001501 Jy/beam ! Clean residual mean=0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0635187 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.0635187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080850Jy sigma=0.000625 ! Fit after self-cal, rms=0.080853Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.99666e-06 Jy ! Component: 100 - total flux cleaned = -1.69109e-05 Jy ! Component: 150 - total flux cleaned = -2.71846e-05 Jy ! Component: 200 - total flux cleaned = -3.69588e-05 Jy ! Total flux subtracted in 200 components = -3.69588e-05 Jy ! Clean residual min=-0.001478 max=0.001507 Jy/beam ! Clean residual mean=0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0634818 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.0634818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080852Jy sigma=0.000625 ! Fit after self-cal, rms=0.080845Jy sigma=0.000625 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=16 mas, bpa=-17.97 degrees ! Estimated noise=739.198 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.717 x 16 at -17.97 degrees (North through East) ! Clean map min=-0.0014894 max=0.054926 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.883 mas, bmaj=14.42 mas, bpa=-18.3 degrees ! Estimated noise=1452.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413292 Jy ! Component: 100 - total flux cleaned = 0.0531989 Jy ! Component: 150 - total flux cleaned = 0.0585929 Jy ! Component: 200 - total flux cleaned = 0.0612513 Jy ! Total flux subtracted in 200 components = 0.0612513 Jy ! Clean residual min=-0.003149 max=0.003391 Jy/beam ! Clean residual mean=0.000003 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.0612514 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0612514 Jy ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=16 mas, bpa=-17.97 degrees ! Estimated noise=739.198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-76.5, 120). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216474 Jy ! Component: 100 - total flux cleaned = 0.00348719 Jy ! Component: 150 - total flux cleaned = 0.00374119 Jy ! Component: 200 - total flux cleaned = 0.00388149 Jy ! Total flux subtracted in 200 components = 0.00388149 Jy ! Clean residual min=-0.001520 max=0.001474 Jy/beam ! Clean residual mean=-0.000000 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0651328 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.0651329 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.09 mas, bmaj=16.38 mas, bpa=-14.54 degrees ! Estimated noise=856.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379449 Jy ! Component: 100 - total flux cleaned = -0.000496278 Jy ! Component: 150 - total flux cleaned = -0.000575845 Jy ! Component: 200 - total flux cleaned = -0.000604503 Jy ! Total flux subtracted in 200 components = -0.000604503 Jy ! Clean residual min=-0.001386 max=0.001649 Jy/beam ! Clean residual mean=-0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0645284 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.3282e-05 Jy ! Component: 100 - total flux cleaned = -3.76129e-05 Jy ! Component: 150 - total flux cleaned = -4.87775e-05 Jy ! Component: 200 - total flux cleaned = -6.02071e-05 Jy ! Total flux subtracted in 200 components = -6.02071e-05 Jy ! Clean residual min=-0.001370 max=0.001637 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0644681 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.0644682 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=16 mas, bpa=-17.97 degrees ! Estimated noise=739.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296724 Jy ! Component: 100 - total flux cleaned = 0.000394486 Jy ! Component: 150 - total flux cleaned = 0.000372848 Jy ! Component: 200 - total flux cleaned = 0.000352597 Jy ! Total flux subtracted in 200 components = 0.000352597 Jy ! Clean residual min=-0.001500 max=0.001491 Jy/beam ! Clean residual mean=0.000000 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0648208 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.0648207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080826Jy sigma=0.000625 ! Fit after self-cal, rms=0.080824Jy sigma=0.000625 wmodel J1202+0235_S_2017_09_26_pus_map.mod ! Writing 87 model components to file: J1202+0235_S_2017_09_26_pus_map.mod wobs J1202+0235_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1202+0235_S_2017_09_26_pus_uvs.fits wwins J1202+0235_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J1202+0235_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216751 Jy ! Component: 100 - total flux cleaned = -0.000213078 Jy ! Component: 150 - total flux cleaned = -0.000297025 Jy ! Component: 200 - total flux cleaned = -0.000336266 Jy ! Component: 250 - total flux cleaned = -0.000392379 Jy ! Component: 300 - total flux cleaned = -0.000483591 Jy ! Component: 350 - total flux cleaned = -0.000572043 Jy ! Component: 400 - total flux cleaned = -0.000588826 Jy ! Component: 450 - total flux cleaned = -0.000639119 Jy ! Component: 500 - total flux cleaned = -0.000672008 Jy ! Component: 550 - total flux cleaned = -0.000767679 Jy ! Component: 600 - total flux cleaned = -0.000782991 Jy ! Component: 650 - total flux cleaned = -0.000859964 Jy ! Component: 700 - total flux cleaned = -0.000980126 Jy ! Component: 750 - total flux cleaned = -0.0010534 Jy ! Component: 800 - total flux cleaned = -0.00113997 Jy ! Component: 850 - total flux cleaned = -0.00122499 Jy ! Component: 900 - total flux cleaned = -0.00134991 Jy ! Component: 950 - total flux cleaned = -0.00144532 Jy ! Component: 1000 - total flux cleaned = -0.0015524 Jy ! Component: 1050 - total flux cleaned = -0.00160513 Jy ! Component: 1100 - total flux cleaned = -0.00170895 Jy ! Component: 1150 - total flux cleaned = -0.00179802 Jy ! Component: 1200 - total flux cleaned = -0.00186079 Jy ! Component: 1250 - total flux cleaned = -0.00193488 Jy ! Component: 1300 - total flux cleaned = -0.00197147 Jy ! Component: 1350 - total flux cleaned = -0.0020194 Jy ! Component: 1400 - total flux cleaned = -0.00204302 Jy ! Component: 1450 - total flux cleaned = -0.00206645 Jy ! Component: 1500 - total flux cleaned = -0.00211257 Jy ! Component: 1550 - total flux cleaned = -0.00215791 Jy ! Component: 1600 - total flux cleaned = -0.00218016 Jy ! Component: 1650 - total flux cleaned = -0.00221341 Jy ! Component: 1700 - total flux cleaned = -0.00227889 Jy ! Component: 1750 - total flux cleaned = -0.0023219 Jy ! Component: 1800 - total flux cleaned = -0.00234329 Jy ! Component: 1850 - total flux cleaned = -0.00238549 Jy ! Component: 1900 - total flux cleaned = -0.00240647 Jy ! Component: 1950 - total flux cleaned = -0.00242713 Jy ! Component: 2000 - total flux cleaned = -0.00245771 Jy ! Component: 2050 - total flux cleaned = -0.00248784 Jy ! Component: 2100 - total flux cleaned = -0.00244807 Jy ! Component: 2150 - total flux cleaned = -0.00247766 Jy ! Component: 2200 - total flux cleaned = -0.00246793 Jy ! Component: 2250 - total flux cleaned = -0.00244864 Jy ! Component: 2300 - total flux cleaned = -0.00244872 Jy ! Component: 2350 - total flux cleaned = -0.0024582 Jy ! Component: 2400 - total flux cleaned = -0.00244881 Jy ! Component: 2450 - total flux cleaned = -0.00244883 Jy ! Component: 2500 - total flux cleaned = -0.00243957 Jy ! Component: 2550 - total flux cleaned = -0.0024395 Jy ! Component: 2600 - total flux cleaned = -0.00241227 Jy ! Component: 2650 - total flux cleaned = -0.00241234 Jy ! Component: 2700 - total flux cleaned = -0.00242123 Jy ! Component: 2750 - total flux cleaned = -0.0024036 Jy ! Component: 2800 - total flux cleaned = -0.00240372 Jy ! Component: 2850 - total flux cleaned = -0.00241235 Jy ! Component: 2900 - total flux cleaned = -0.00241233 Jy ! Component: 2950 - total flux cleaned = -0.00242104 Jy ! Component: 3000 - total flux cleaned = -0.00241278 Jy ! Component: 3050 - total flux cleaned = -0.00241284 Jy ! Component: 3100 - total flux cleaned = -0.00240452 Jy ! Component: 3150 - total flux cleaned = -0.00239633 Jy ! Component: 3200 - total flux cleaned = -0.0024209 Jy ! Component: 3250 - total flux cleaned = -0.00242904 Jy ! Component: 3300 - total flux cleaned = -0.00237252 Jy ! Component: 3350 - total flux cleaned = -0.00238061 Jy ! Component: 3400 - total flux cleaned = -0.00235663 Jy ! Component: 3450 - total flux cleaned = -0.00230931 Jy ! Component: 3500 - total flux cleaned = -0.00231708 Jy ! Component: 3550 - total flux cleaned = -0.00227822 Jy ! Component: 3600 - total flux cleaned = -0.00224732 Jy ! Component: 3650 - total flux cleaned = -0.00221654 Jy ! Component: 3700 - total flux cleaned = -0.00219364 Jy ! Component: 3750 - total flux cleaned = -0.00215567 Jy ! Component: 3800 - total flux cleaned = -0.00211049 Jy ! Component: 3850 - total flux cleaned = -0.00208062 Jy ! Component: 3900 - total flux cleaned = -0.0020286 Jy ! Component: 3950 - total flux cleaned = -0.00201381 Jy ! Component: 4000 - total flux cleaned = -0.00196971 Jy ! Component: 4050 - total flux cleaned = -0.00193313 Jy ! Total flux subtracted in 4096 components = -0.00191128 Jy ! Clean residual min=-0.000394 max=0.000465 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.0629095 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 364 components and 0.0629095 Jy ![Exited script file: muppet] wmap "J1202+0235_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.717 x 16 at -17.97 degrees (North through East) ! Clean map min=-0.0011248 max=0.054633 Jy/beam ! Writing clean map to FITS file: J1202+0235_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0546325 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013754 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.755263 0.755263 1.51053 3.02105 6.0421 12.0842 24.1684 48.3368 96.6736 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.717 x 16 at -17.97 degrees (North through East) ! Clean map min=-0.0011248 max=0.054633 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1202+0235_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:33 2019