! Started logfile: J1201+0028_S_2017_02_24_pus_uvs.log on Sat May 4 11:27:02 2019 obs J1201+0028_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1201+0028_S_2017_02_24_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.843658 visibilities/baseline/integration-bin. ! Found source: J1201+0028 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 17160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1201+0028_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 435 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.839760Jy sigma=0.019253 ! Fit after self-cal, rms=0.833458Jy sigma=0.019221 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=7.155 mas, bpa=-2.224 degrees ! Estimated noise=816.403 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114612 Jy ! Component: 100 - total flux cleaned = 0.139606 Jy ! Total flux subtracted in 100 components = 0.139606 Jy ! Clean residual min=-0.017680 max=0.018137 Jy/beam ! Clean residual mean=-0.000038 rms=0.006214 Jy/beam ! Combined flux in latest and established models = 0.139606 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.139606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093921Jy sigma=0.002502 ! Fit after self-cal, rms=0.093891Jy sigma=0.002501 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=8.336 mas, bpa=-3.418 degrees ! Estimated noise=567.766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00290156 Jy ! Component: 100 - total flux cleaned = -0.00416025 Jy ! Component: 150 - total flux cleaned = -0.00518566 Jy ! Component: 200 - total flux cleaned = -0.00614183 Jy ! Total flux subtracted in 200 components = -0.00614183 Jy ! Clean residual min=-0.021605 max=0.022438 Jy/beam ! Clean residual mean=-0.000093 rms=0.006607 Jy/beam ! Combined flux in latest and established models = 0.133464 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.133464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093358Jy sigma=0.002480 ! Fit after self-cal, rms=0.093327Jy sigma=0.002480 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.91 HN 0.94 KP 0.85 ! LA 0.82 MK 0.93 NL 0.89 OV 0.92 ! PT 0.87 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.84 HN 0.96 KP 0.81 ! LA 0.80 MK 0.89 NL 0.86 OV 0.96 ! PT 0.84 SC 1.14 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.87 HN 0.93 KP 0.88 ! LA 0.87 MK 0.93 NL 0.97 OV 0.87 ! PT 0.85 SC 1.08 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 0.91 KP 1.00* ! LA 19.39 MK 1.04 NL 1.00* OV 0.89 ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.093327Jy sigma=0.002480 ! Fit after self-cal, rms=0.678820Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.473 mas, bmaj=8.194 mas, bpa=-3.44 degrees ! Estimated noise=578.051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518624 Jy ! Component: 100 - total flux cleaned = 0.00816406 Jy ! Component: 150 - total flux cleaned = 0.00979557 Jy ! Component: 200 - total flux cleaned = 0.0102634 Jy ! Total flux subtracted in 200 components = 0.0102634 Jy ! Clean residual min=-0.003097 max=0.003554 Jy/beam ! Clean residual mean=0.000002 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.143727 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.143727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.677960Jy sigma=0.000719 ! Fit after self-cal, rms=0.678420Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.678420Jy sigma=0.000709 ! Fit after self-cal, rms=0.776035Jy sigma=0.000704 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=8.112 mas, bpa=-3.461 degrees ! Estimated noise=589.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394588 Jy ! Component: 100 - total flux cleaned = 0.00609597 Jy ! Component: 150 - total flux cleaned = 0.00741795 Jy ! Component: 200 - total flux cleaned = 0.00823504 Jy ! Total flux subtracted in 200 components = 0.00823504 Jy ! Clean residual min=-0.002985 max=0.003253 Jy/beam ! Clean residual mean=0.000008 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.151963 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 0.151963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.775290Jy sigma=0.000705 ! Fit after self-cal, rms=0.775313Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014816 Jy ! Component: 100 - total flux cleaned = 0.000331992 Jy ! Component: 150 - total flux cleaned = 0.000476333 Jy ! Component: 200 - total flux cleaned = 0.000589098 Jy ! Total flux subtracted in 200 components = 0.000589098 Jy ! Clean residual min=-0.002866 max=0.003185 Jy/beam ! Clean residual mean=0.000008 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.152552 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.152552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.775259Jy sigma=0.000705 ! Fit after self-cal, rms=0.775262Jy sigma=0.000705 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.775262Jy sigma=0.000705 ! Fit after self-cal, rms=0.150990Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=8.08 mas, bpa=-3.352 degrees ! Estimated noise=591.255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125324 Jy ! Component: 100 - total flux cleaned = 0.00148977 Jy ! Component: 150 - total flux cleaned = 0.00150219 Jy ! Component: 200 - total flux cleaned = 0.00152431 Jy ! Total flux subtracted in 200 components = 0.00152431 Jy ! Clean residual min=-0.002037 max=0.002979 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.154076 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.154076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150936Jy sigma=0.000679 ! Fit after self-cal, rms=0.150858Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326686 Jy ! Component: 100 - total flux cleaned = 0.0052183 Jy ! Component: 150 - total flux cleaned = 0.00650969 Jy ! Component: 200 - total flux cleaned = 0.00700888 Jy ! Total flux subtracted in 200 components = 0.00700888 Jy ! Clean residual min=-0.001700 max=0.001955 Jy/beam ! Clean residual mean=0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.161085 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 0.161085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150808Jy sigma=0.000676 ! Fit after self-cal, rms=0.150800Jy sigma=0.000676 ! Inverting map ! Added new window around map position (-66, 123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171513 Jy ! Component: 100 - total flux cleaned = 0.00232154 Jy ! Component: 150 - total flux cleaned = 0.00266882 Jy ! Component: 200 - total flux cleaned = 0.00291667 Jy ! Total flux subtracted in 200 components = 0.00291667 Jy ! Clean residual min=-0.001563 max=0.001686 Jy/beam ! Clean residual mean=0.000002 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.164001 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.164001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150743Jy sigma=0.000675 ! Fit after self-cal, rms=0.150741Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150741Jy sigma=0.000675 ! Fit after self-cal, rms=0.152024Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.591 mas, bmaj=12.23 mas, bpa=1.54 degrees ! Estimated noise=720.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136167 Jy ! Component: 100 - total flux cleaned = 0.00222058 Jy ! Component: 150 - total flux cleaned = 0.00288738 Jy ! Component: 200 - total flux cleaned = 0.00342452 Jy ! Total flux subtracted in 200 components = 0.00342452 Jy ! Clean residual min=-0.001812 max=0.001946 Jy/beam ! Clean residual mean=0.000002 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.167426 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 112 components and 0.167426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151980Jy sigma=0.000675 ! Fit after self-cal, rms=0.151977Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000496791 Jy ! Component: 100 - total flux cleaned = 0.000778946 Jy ! Component: 150 - total flux cleaned = 0.00101677 Jy ! Component: 200 - total flux cleaned = 0.00118424 Jy ! Total flux subtracted in 200 components = 0.00118424 Jy ! Clean residual min=-0.001773 max=0.001943 Jy/beam ! Clean residual mean=0.000001 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.16861 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 0.16861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151965Jy sigma=0.000675 ! Fit after self-cal, rms=0.151964Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=8.052 mas, bpa=-3.217 degrees ! Estimated noise=592.428 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 8.052 at -3.217 degrees (North through East) ! Clean map min=-0.0014473 max=0.14856 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=6.96 mas, bpa=-2.008 degrees ! Estimated noise=821.247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115707 Jy ! Component: 100 - total flux cleaned = 0.141464 Jy ! Component: 150 - total flux cleaned = 0.149801 Jy ! Component: 200 - total flux cleaned = 0.154093 Jy ! Total flux subtracted in 200 components = 0.154093 Jy ! Clean residual min=-0.002733 max=0.002765 Jy/beam ! Clean residual mean=-0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.154093 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.154093 Jy ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=8.052 mas, bpa=-3.217 degrees ! Estimated noise=592.428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396441 Jy ! Component: 100 - total flux cleaned = 0.00676555 Jy ! Component: 150 - total flux cleaned = 0.00828707 Jy ! Component: 200 - total flux cleaned = 0.00954113 Jy ! Total flux subtracted in 200 components = 0.00954113 Jy ! Clean residual min=-0.001765 max=0.001808 Jy/beam ! Clean residual mean=0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.163634 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 0.163634 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.591 mas, bmaj=12.23 mas, bpa=1.54 degrees ! Estimated noise=720.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200343 Jy ! Component: 100 - total flux cleaned = 0.00304076 Jy ! Component: 150 - total flux cleaned = 0.00353973 Jy ! Component: 200 - total flux cleaned = 0.00394339 Jy ! Total flux subtracted in 200 components = 0.00394339 Jy ! Clean residual min=-0.001844 max=0.001951 Jy/beam ! Clean residual mean=0.000002 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.167578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310355 Jy ! Component: 100 - total flux cleaned = 0.000481889 Jy ! Component: 150 - total flux cleaned = 0.000612463 Jy ! Component: 200 - total flux cleaned = 0.00067127 Jy ! Total flux subtracted in 200 components = 0.00067127 Jy ! Clean residual min=-0.001740 max=0.001947 Jy/beam ! Clean residual mean=0.000002 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.168249 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 101 components and 0.168249 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=8.052 mas, bpa=-3.217 degrees ! Estimated noise=592.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.7461e-05 Jy ! Component: 100 - total flux cleaned = -0.000125093 Jy ! Component: 150 - total flux cleaned = -0.000153622 Jy ! Component: 200 - total flux cleaned = -0.000127064 Jy ! Total flux subtracted in 200 components = -0.000127064 Jy ! Clean residual min=-0.001470 max=0.001840 Jy/beam ! Clean residual mean=0.000001 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.168122 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 0.168122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151969Jy sigma=0.000675 ! Fit after self-cal, rms=0.151968Jy sigma=0.000675 wmodel J1201+0028_S_2017_02_24_pus_map.mod ! Writing 127 model components to file: J1201+0028_S_2017_02_24_pus_map.mod wobs J1201+0028_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1201+0028_S_2017_02_24_pus_uvs.fits wwins J1201+0028_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J1201+0028_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000754213 Jy ! Component: 100 - total flux cleaned = 0.00114864 Jy ! Component: 150 - total flux cleaned = 0.00128315 Jy ! Component: 200 - total flux cleaned = 0.00130939 Jy ! Component: 250 - total flux cleaned = 0.00135912 Jy ! Component: 300 - total flux cleaned = 0.00140684 Jy ! Component: 350 - total flux cleaned = 0.00138358 Jy ! Component: 400 - total flux cleaned = 0.00152172 Jy ! Component: 450 - total flux cleaned = 0.00154397 Jy ! Component: 500 - total flux cleaned = 0.00152223 Jy ! Component: 550 - total flux cleaned = 0.00158745 Jy ! Component: 600 - total flux cleaned = 0.00167207 Jy ! Component: 650 - total flux cleaned = 0.00175484 Jy ! Component: 700 - total flux cleaned = 0.0018564 Jy ! Component: 750 - total flux cleaned = 0.00197616 Jy ! Component: 800 - total flux cleaned = 0.0021138 Jy ! Component: 850 - total flux cleaned = 0.00221054 Jy ! Component: 900 - total flux cleaned = 0.00238217 Jy ! Component: 950 - total flux cleaned = 0.00247635 Jy ! Component: 1000 - total flux cleaned = 0.00264329 Jy ! Component: 1050 - total flux cleaned = 0.00277096 Jy ! Component: 1100 - total flux cleaned = 0.00293306 Jy ! Component: 1150 - total flux cleaned = 0.0031104 Jy ! Component: 1200 - total flux cleaned = 0.003198 Jy ! Component: 1250 - total flux cleaned = 0.00331945 Jy ! Component: 1300 - total flux cleaned = 0.00352458 Jy ! Component: 1350 - total flux cleaned = 0.00364235 Jy ! Component: 1400 - total flux cleaned = 0.00375918 Jy ! Component: 1450 - total flux cleaned = 0.0038583 Jy ! Component: 1500 - total flux cleaned = 0.00403747 Jy ! Component: 1550 - total flux cleaned = 0.00408596 Jy ! Component: 1600 - total flux cleaned = 0.00422924 Jy ! Component: 1650 - total flux cleaned = 0.00429216 Jy ! Component: 1700 - total flux cleaned = 0.00437034 Jy ! Component: 1750 - total flux cleaned = 0.00443237 Jy ! Component: 1800 - total flux cleaned = 0.00452381 Jy ! Component: 1850 - total flux cleaned = 0.00458422 Jy ! Component: 1900 - total flux cleaned = 0.00462896 Jy ! Component: 1950 - total flux cleaned = 0.00470264 Jy ! Component: 2000 - total flux cleaned = 0.00477541 Jy ! Component: 2050 - total flux cleaned = 0.00477572 Jy ! Component: 2100 - total flux cleaned = 0.00483315 Jy ! Component: 2150 - total flux cleaned = 0.00486188 Jy ! Component: 2200 - total flux cleaned = 0.00498856 Jy ! Component: 2250 - total flux cleaned = 0.00505803 Jy ! Component: 2300 - total flux cleaned = 0.00512707 Jy ! Component: 2350 - total flux cleaned = 0.00529051 Jy ! Component: 2400 - total flux cleaned = 0.0053038 Jy ! Component: 2450 - total flux cleaned = 0.00538413 Jy ! Component: 2500 - total flux cleaned = 0.00551664 Jy ! Component: 2550 - total flux cleaned = 0.00552971 Jy ! Component: 2600 - total flux cleaned = 0.00566031 Jy ! Component: 2650 - total flux cleaned = 0.00569913 Jy ! Component: 2700 - total flux cleaned = 0.00575028 Jy ! Component: 2750 - total flux cleaned = 0.00583927 Jy ! Component: 2800 - total flux cleaned = 0.00592739 Jy ! Component: 2850 - total flux cleaned = 0.00596485 Jy ! Component: 2900 - total flux cleaned = 0.00603933 Jy ! Component: 2950 - total flux cleaned = 0.00606403 Jy ! Component: 3000 - total flux cleaned = 0.00616174 Jy ! Component: 3050 - total flux cleaned = 0.00625863 Jy ! Component: 3100 - total flux cleaned = 0.00631851 Jy ! Component: 3150 - total flux cleaned = 0.00637809 Jy ! Component: 3200 - total flux cleaned = 0.00643728 Jy ! Component: 3250 - total flux cleaned = 0.00653112 Jy ! Component: 3300 - total flux cleaned = 0.00654275 Jy ! Component: 3350 - total flux cleaned = 0.00663529 Jy ! Component: 3400 - total flux cleaned = 0.00670409 Jy ! Component: 3450 - total flux cleaned = 0.00674961 Jy ! Component: 3500 - total flux cleaned = 0.0067724 Jy ! Component: 3550 - total flux cleaned = 0.00679512 Jy ! Component: 3600 - total flux cleaned = 0.00690671 Jy ! Component: 3650 - total flux cleaned = 0.00692892 Jy ! Component: 3700 - total flux cleaned = 0.0069948 Jy ! Component: 3750 - total flux cleaned = 0.00702763 Jy ! Component: 3800 - total flux cleaned = 0.0070711 Jy ! Component: 3850 - total flux cleaned = 0.00715718 Jy ! Component: 3900 - total flux cleaned = 0.00717851 Jy ! Component: 3950 - total flux cleaned = 0.0072105 Jy ! Component: 4000 - total flux cleaned = 0.00726324 Jy ! Component: 4050 - total flux cleaned = 0.00731582 Jy ! Total flux subtracted in 4096 components = 0.00729502 Jy ! Clean residual min=-0.000721 max=0.000537 Jy/beam ! Clean residual mean=-0.000001 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.175417 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 415 components and 0.175417 Jy ![Exited script file: muppet] wmap "J1201+0028_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 8.052 at -3.217 degrees (North through East) ! Clean map min=-0.0010921 max=0.14838 Jy/beam ! Writing clean map to FITS file: J1201+0028_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.14838 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019668 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.397655 0.397655 0.79531 1.59062 3.18124 6.36248 12.725 25.4499 50.8998 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.417 x 8.052 at -3.217 degrees (North through East) ! Clean map min=-0.0010921 max=0.14838 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1201+0028_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:27:07 2019