! Started logfile: J1200+5300_S_2017_08_12_pus_uvs.log on Fri May 10 14:59:08 2019 obs J1200+5300_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1200+5300_S_2017_08_12_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.97739 visibilities/baseline/integration-bin. ! Found source: J1200+5300 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 30260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1200+5300_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 927 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901654Jy sigma=0.008521 ! Fit after self-cal, rms=0.890840Jy sigma=0.008431 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=4.071 mas, bpa=17.16 degrees ! Estimated noise=954.929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0857437 Jy ! Component: 100 - total flux cleaned = 0.104475 Jy ! Total flux subtracted in 100 components = 0.104475 Jy ! Clean residual min=-0.004932 max=0.006995 Jy/beam ! Clean residual mean=0.000003 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.104475 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.104475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080286Jy sigma=0.000714 ! Fit after self-cal, rms=0.080254Jy sigma=0.000713 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.858 mas, bmaj=5.033 mas, bpa=19.25 degrees ! Estimated noise=491.187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789255 Jy ! Component: 100 - total flux cleaned = 0.011497 Jy ! Component: 150 - total flux cleaned = 0.0135118 Jy ! Component: 200 - total flux cleaned = 0.0144063 Jy ! Total flux subtracted in 200 components = 0.0144063 Jy ! Clean residual min=-0.004171 max=0.006509 Jy/beam ! Clean residual mean=0.000013 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.118881 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.118881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079590Jy sigma=0.000706 ! Fit after self-cal, rms=0.079595Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.95 HN 0.96 KP 1.02 ! LA 0.97 MK 0.98 NL 0.86 OV 0.98 ! PT 0.98 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.04 HN 0.98 KP 0.97 ! LA 0.92 MK 1.01 NL 1.00 OV 1.02 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.06 HN 0.96 KP 0.97 ! LA 0.96 MK 1.06 NL 0.99 OV 0.93 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.94 KP 1.00* ! LA 0.97 MK 1.16 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.079595Jy sigma=0.000706 ! Fit after self-cal, rms=0.081056Jy sigma=0.000696 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=5.065 mas, bpa=19.01 degrees ! Estimated noise=489.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.51095e-05 Jy ! Component: 100 - total flux cleaned = -8.78221e-05 Jy ! Component: 150 - total flux cleaned = -0.000112596 Jy ! Component: 200 - total flux cleaned = -0.000113336 Jy ! Total flux subtracted in 200 components = -0.000113336 Jy ! Clean residual min=-0.004308 max=0.004760 Jy/beam ! Clean residual mean=0.000008 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.118768 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.118768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081032Jy sigma=0.000696 ! Fit after self-cal, rms=0.081108Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081108Jy sigma=0.000696 ! Fit after self-cal, rms=0.108243Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.857 mas, bmaj=5.053 mas, bpa=17.95 degrees ! Estimated noise=494.371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000690114 Jy ! Component: 100 - total flux cleaned = 0.000657039 Jy ! Component: 150 - total flux cleaned = 0.00063394 Jy ! Component: 200 - total flux cleaned = 0.000589138 Jy ! Total flux subtracted in 200 components = 0.000589138 Jy ! Clean residual min=-0.001708 max=0.001812 Jy/beam ! Clean residual mean=-0.000002 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.119357 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.119357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108229Jy sigma=0.000671 ! Fit after self-cal, rms=0.108552Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111055 Jy ! Component: 100 - total flux cleaned = 0.000985433 Jy ! Component: 150 - total flux cleaned = 0.00085335 Jy ! Component: 200 - total flux cleaned = 0.000825989 Jy ! Total flux subtracted in 200 components = 0.000825989 Jy ! Clean residual min=-0.001570 max=0.001570 Jy/beam ! Clean residual mean=-0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.120183 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.120183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108520Jy sigma=0.000670 ! Fit after self-cal, rms=0.108529Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108529Jy sigma=0.000670 ! Fit after self-cal, rms=0.117114Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=5.056 mas, bpa=17.76 degrees ! Estimated noise=493.765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000719992 Jy ! Component: 100 - total flux cleaned = 0.00066855 Jy ! Component: 150 - total flux cleaned = 0.00064519 Jy ! Component: 200 - total flux cleaned = 0.000680529 Jy ! Total flux subtracted in 200 components = 0.000680529 Jy ! Clean residual min=-0.001278 max=0.001285 Jy/beam ! Clean residual mean=-0.000001 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.120864 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.120864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117098Jy sigma=0.000669 ! Fit after self-cal, rms=0.117125Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126266 Jy ! Component: 100 - total flux cleaned = 0.000126571 Jy ! Component: 150 - total flux cleaned = 0.000140838 Jy ! Component: 200 - total flux cleaned = 0.000167917 Jy ! Total flux subtracted in 200 components = 0.000167917 Jy ! Clean residual min=-0.001285 max=0.001253 Jy/beam ! Clean residual mean=-0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.121032 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 0.121032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117119Jy sigma=0.000669 ! Fit after self-cal, rms=0.117123Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117123Jy sigma=0.000669 ! Fit after self-cal, rms=0.117551Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.849 mas, bmaj=9.148 mas, bpa=23.31 degrees ! Estimated noise=611.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447823 Jy ! Component: 100 - total flux cleaned = 0.000509023 Jy ! Component: 150 - total flux cleaned = 0.000528922 Jy ! Component: 200 - total flux cleaned = 0.000546023 Jy ! Total flux subtracted in 200 components = 0.000546023 Jy ! Clean residual min=-0.001347 max=0.001407 Jy/beam ! Clean residual mean=0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.121578 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 92 components and 0.121578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117549Jy sigma=0.000669 ! Fit after self-cal, rms=0.117551Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.50224e-05 Jy ! Component: 100 - total flux cleaned = 6.19908e-05 Jy ! Component: 150 - total flux cleaned = 6.19812e-05 Jy ! Component: 200 - total flux cleaned = 6.18209e-05 Jy ! Total flux subtracted in 200 components = 6.18209e-05 Jy ! Clean residual min=-0.001324 max=0.001408 Jy/beam ! Clean residual mean=0.000000 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.121639 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.121639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117551Jy sigma=0.000669 ! Fit after self-cal, rms=0.117552Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=5.055 mas, bpa=17.62 degrees ! Estimated noise=493.102 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.846 x 5.055 at 17.62 degrees (North through East) ! Clean map min=-0.00126 max=0.11215 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=4.059 mas, bpa=15.42 degrees ! Estimated noise=969.309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869031 Jy ! Component: 100 - total flux cleaned = 0.105982 Jy ! Component: 150 - total flux cleaned = 0.111833 Jy ! Component: 200 - total flux cleaned = 0.115249 Jy ! Total flux subtracted in 200 components = 0.115249 Jy ! Clean residual min=-0.002507 max=0.002904 Jy/beam ! Clean residual mean=-0.000001 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.115249 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.115249 Jy ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=5.055 mas, bpa=17.62 degrees ! Estimated noise=493.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293738 Jy ! Component: 100 - total flux cleaned = 0.00413516 Jy ! Component: 150 - total flux cleaned = 0.00460758 Jy ! Component: 200 - total flux cleaned = 0.00504178 Jy ! Total flux subtracted in 200 components = 0.00504178 Jy ! Clean residual min=-0.001422 max=0.001327 Jy/beam ! Clean residual mean=-0.000001 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.120291 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 47 components and 0.120291 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.849 mas, bmaj=9.148 mas, bpa=23.31 degrees ! Estimated noise=611.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092212 Jy ! Component: 100 - total flux cleaned = 0.00125244 Jy ! Component: 150 - total flux cleaned = 0.00133397 Jy ! Component: 200 - total flux cleaned = 0.00135392 Jy ! Total flux subtracted in 200 components = 0.00135392 Jy ! Clean residual min=-0.001320 max=0.001365 Jy/beam ! Clean residual mean=0.000000 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.121645 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.48367e-06 Jy ! Component: 100 - total flux cleaned = 7.35839e-06 Jy ! Component: 150 - total flux cleaned = 1.37211e-05 Jy ! Component: 200 - total flux cleaned = 1.94023e-05 Jy ! Total flux subtracted in 200 components = 1.94023e-05 Jy ! Clean residual min=-0.001321 max=0.001389 Jy/beam ! Clean residual mean=0.000000 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.121664 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 81 components and 0.121664 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=5.055 mas, bpa=17.62 degrees ! Estimated noise=493.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.29982e-05 Jy ! Component: 100 - total flux cleaned = -2.52412e-05 Jy ! Component: 150 - total flux cleaned = -2.54825e-05 Jy ! Component: 200 - total flux cleaned = -3.92082e-05 Jy ! Total flux subtracted in 200 components = -3.92082e-05 Jy ! Clean residual min=-0.001372 max=0.001308 Jy/beam ! Clean residual mean=-0.000000 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.121625 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 0.121625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117550Jy sigma=0.000669 ! Fit after self-cal, rms=0.117548Jy sigma=0.000669 wmodel J1200+5300_S_2017_08_12_pus_map.mod ! Writing 97 model components to file: J1200+5300_S_2017_08_12_pus_map.mod wobs J1200+5300_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1200+5300_S_2017_08_12_pus_uvs.fits wwins J1200+5300_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1200+5300_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.98038e-05 Jy ! Component: 100 - total flux cleaned = 6.738e-05 Jy ! Component: 150 - total flux cleaned = 0.000169844 Jy ! Component: 200 - total flux cleaned = 0.000189258 Jy ! Component: 250 - total flux cleaned = 0.000208393 Jy ! Component: 300 - total flux cleaned = 0.000189699 Jy ! Component: 350 - total flux cleaned = 0.000171188 Jy ! Component: 400 - total flux cleaned = 0.000153117 Jy ! Component: 450 - total flux cleaned = 0.000153392 Jy ! Component: 500 - total flux cleaned = 0.000136355 Jy ! Component: 550 - total flux cleaned = 0.00015338 Jy ! Component: 600 - total flux cleaned = 0.000186798 Jy ! Component: 650 - total flux cleaned = 0.000186896 Jy ! Component: 700 - total flux cleaned = 0.000235659 Jy ! Component: 750 - total flux cleaned = 0.00023571 Jy ! Component: 800 - total flux cleaned = 0.000251472 Jy ! Component: 850 - total flux cleaned = 0.000235785 Jy ! Component: 900 - total flux cleaned = 0.000266669 Jy ! Component: 950 - total flux cleaned = 0.000251181 Jy ! Component: 1000 - total flux cleaned = 0.000235906 Jy ! Component: 1050 - total flux cleaned = 0.000236091 Jy ! Component: 1100 - total flux cleaned = 0.000250855 Jy ! Component: 1150 - total flux cleaned = 0.000279836 Jy ! Component: 1200 - total flux cleaned = 0.000308516 Jy ! Component: 1250 - total flux cleaned = 0.000251429 Jy ! Component: 1300 - total flux cleaned = 0.000294104 Jy ! Component: 1350 - total flux cleaned = 0.000280088 Jy ! Component: 1400 - total flux cleaned = 0.000280333 Jy ! Component: 1450 - total flux cleaned = 0.00032166 Jy ! Component: 1500 - total flux cleaned = 0.00036231 Jy ! Component: 1550 - total flux cleaned = 0.000362366 Jy ! Component: 1600 - total flux cleaned = 0.000335819 Jy ! Component: 1650 - total flux cleaned = 0.000362275 Jy ! Component: 1700 - total flux cleaned = 0.000440691 Jy ! Component: 1750 - total flux cleaned = 0.000388816 Jy ! Component: 1800 - total flux cleaned = 0.000388881 Jy ! Component: 1850 - total flux cleaned = 0.000389053 Jy ! Component: 1900 - total flux cleaned = 0.000401752 Jy ! Component: 1950 - total flux cleaned = 0.00042666 Jy ! Component: 2000 - total flux cleaned = 0.000426637 Jy ! Component: 2050 - total flux cleaned = 0.000426594 Jy ! Component: 2100 - total flux cleaned = 0.000402127 Jy ! Component: 2150 - total flux cleaned = 0.000414229 Jy ! Component: 2200 - total flux cleaned = 0.000366175 Jy ! Component: 2250 - total flux cleaned = 0.000401972 Jy ! Component: 2300 - total flux cleaned = 0.000401981 Jy ! Component: 2350 - total flux cleaned = 0.000401951 Jy ! Component: 2400 - total flux cleaned = 0.000378782 Jy ! Component: 2450 - total flux cleaned = 0.000355762 Jy ! Component: 2500 - total flux cleaned = 0.000344253 Jy ! Component: 2550 - total flux cleaned = 0.0003216 Jy ! Component: 2600 - total flux cleaned = 0.000321572 Jy ! Component: 2650 - total flux cleaned = 0.000344142 Jy ! Component: 2700 - total flux cleaned = 0.000332946 Jy ! Component: 2750 - total flux cleaned = 0.000321688 Jy ! Component: 2800 - total flux cleaned = 0.000288659 Jy ! Component: 2850 - total flux cleaned = 0.000266832 Jy ! Component: 2900 - total flux cleaned = 0.000288509 Jy ! Component: 2950 - total flux cleaned = 0.000245307 Jy ! Component: 3000 - total flux cleaned = 0.000245486 Jy ! Component: 3050 - total flux cleaned = 0.000256197 Jy ! Component: 3100 - total flux cleaned = 0.000213815 Jy ! Component: 3150 - total flux cleaned = 0.000224239 Jy ! Component: 3200 - total flux cleaned = 0.000255591 Jy ! Component: 3250 - total flux cleaned = 0.000224423 Jy ! Component: 3300 - total flux cleaned = 0.000224474 Jy ! Component: 3350 - total flux cleaned = 0.000224452 Jy ! Component: 3400 - total flux cleaned = 0.00020408 Jy ! Component: 3450 - total flux cleaned = 0.000193986 Jy ! Component: 3500 - total flux cleaned = 0.000184049 Jy ! Component: 3550 - total flux cleaned = 0.000194117 Jy ! Component: 3600 - total flux cleaned = 0.000193967 Jy ! Component: 3650 - total flux cleaned = 0.00020384 Jy ! Component: 3700 - total flux cleaned = 0.000223534 Jy ! Component: 3750 - total flux cleaned = 0.000223495 Jy ! Component: 3800 - total flux cleaned = 0.000242993 Jy ! Component: 3850 - total flux cleaned = 0.000223616 Jy ! Component: 3900 - total flux cleaned = 0.00021398 Jy ! Component: 3950 - total flux cleaned = 0.000223606 Jy ! Component: 4000 - total flux cleaned = 0.000204612 Jy ! Component: 4050 - total flux cleaned = 0.000251972 Jy ! Total flux subtracted in 4096 components = 0.000242578 Jy ! Clean residual min=-0.000553 max=0.000525 Jy/beam ! Clean residual mean=-0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.121867 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 384 components and 0.121867 Jy ![Exited script file: muppet] wmap "J1200+5300_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.846 x 5.055 at 17.62 degrees (North through East) ! Clean map min=-0.0011193 max=0.11214 Jy/beam ! Writing clean map to FITS file: J1200+5300_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000170661 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.456558 0.456558 0.913116 1.82623 3.65246 7.30493 14.6099 29.2197 58.4394 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.846 x 5.055 at 17.62 degrees (North through East) ! Clean map min=-0.0011193 max=0.11214 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1200+5300_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:59:13 2019