! Started logfile: J1159+0112_S_2017_02_24_pus_uvs.log on Sat May 4 11:26:40 2019 obs J1159+0112_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1159+0112_S_2017_02_24_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.855877 visibilities/baseline/integration-bin. ! Found source: J1159+0112 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 26652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1159+0112_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 657 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.941983Jy sigma=0.025805 ! Fit after self-cal, rms=0.934268Jy sigma=0.025750 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.321 mas, bpa=-4.201 degrees ! Estimated noise=583.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434783 Jy ! Component: 100 - total flux cleaned = 0.0544349 Jy ! Total flux subtracted in 100 components = 0.0544349 Jy ! Clean residual min=-0.011847 max=0.011475 Jy/beam ! Clean residual mean=-0.000020 rms=0.003163 Jy/beam ! Combined flux in latest and established models = 0.0544349 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0544349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087416Jy sigma=0.001430 ! Fit after self-cal, rms=0.087434Jy sigma=0.001420 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=8.56 mas, bpa=-4.29 degrees ! Estimated noise=410.024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164795 Jy ! Component: 100 - total flux cleaned = -0.00228502 Jy ! Component: 150 - total flux cleaned = -0.00281547 Jy ! Component: 200 - total flux cleaned = -0.00327042 Jy ! Total flux subtracted in 200 components = -0.00327042 Jy ! Clean residual min=-0.013426 max=0.016213 Jy/beam ! Clean residual mean=-0.000060 rms=0.003761 Jy/beam ! Combined flux in latest and established models = 0.0511644 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.0511644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087421Jy sigma=0.001396 ! Fit after self-cal, rms=0.087399Jy sigma=0.001396 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.93 HN 0.94 KP 0.89 ! LA 0.74 MK 0.92 NL 0.84 OV 0.84 ! PT 0.70 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.85 HN 0.94 KP 0.86 ! LA 0.74 MK 0.89 NL 0.78 OV 0.89 ! PT 0.68 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.86 HN 0.94 KP 0.91 ! LA 0.80 MK 0.85 NL 0.90 OV 0.84 ! PT 0.70 SC 1.09 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 0.97 KP 1.00* ! LA 13.51 MK 1.01 NL 1.00* OV 0.96 ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.087399Jy sigma=0.001396 ! Fit after self-cal, rms=0.307998Jy sigma=0.000720 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=8.266 mas, bpa=-3.852 degrees ! Estimated noise=419.084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (77, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00921559 Jy ! Component: 100 - total flux cleaned = 0.0137253 Jy ! Component: 150 - total flux cleaned = 0.0165402 Jy ! Component: 200 - total flux cleaned = 0.0183686 Jy ! Total flux subtracted in 200 components = 0.0183686 Jy ! Clean residual min=-0.003868 max=0.006403 Jy/beam ! Clean residual mean=-0.000009 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.0695331 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 74 components and 0.0695331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306905Jy sigma=0.000706 ! Fit after self-cal, rms=0.307364Jy sigma=0.000694 ! Inverting map ! Added new window around map position (14.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624856 Jy ! Component: 100 - total flux cleaned = 0.00974704 Jy ! Component: 150 - total flux cleaned = 0.0122301 Jy ! Component: 200 - total flux cleaned = 0.0141352 Jy ! Total flux subtracted in 200 components = 0.0141352 Jy ! Clean residual min=-0.003205 max=0.004618 Jy/beam ! Clean residual mean=-0.000010 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.0836683 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 119 components and 0.0836683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306841Jy sigma=0.000686 ! Fit after self-cal, rms=0.306860Jy sigma=0.000685 ! Inverting map ! Added new window around map position (54, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042554 Jy ! Component: 100 - total flux cleaned = 0.00702037 Jy ! Component: 150 - total flux cleaned = 0.0091819 Jy ! Component: 200 - total flux cleaned = 0.0107463 Jy ! Total flux subtracted in 200 components = 0.0107463 Jy ! Clean residual min=-0.002826 max=0.004282 Jy/beam ! Clean residual mean=-0.000007 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.0944146 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 157 components and 0.0944146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306535Jy sigma=0.000682 ! Fit after self-cal, rms=0.306521Jy sigma=0.000681 ! Inverting map ! Added new window around map position (-45, 27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361372 Jy ! Component: 100 - total flux cleaned = 0.00570441 Jy ! Component: 150 - total flux cleaned = 0.00708788 Jy ! Component: 200 - total flux cleaned = 0.00794436 Jy ! Total flux subtracted in 200 components = 0.00794436 Jy ! Clean residual min=-0.002298 max=0.002522 Jy/beam ! Clean residual mean=-0.000004 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.102359 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 192 components and 0.102359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306343Jy sigma=0.000678 ! Fit after self-cal, rms=0.306318Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306318Jy sigma=0.000678 ! Fit after self-cal, rms=0.381629Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=8.163 mas, bpa=-4.04 degrees ! Estimated noise=423.256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232959 Jy ! Component: 100 - total flux cleaned = 0.00394963 Jy ! Component: 150 - total flux cleaned = 0.00531685 Jy ! Component: 200 - total flux cleaned = 0.00650253 Jy ! Total flux subtracted in 200 components = 0.00650253 Jy ! Clean residual min=-0.001721 max=0.002300 Jy/beam ! Clean residual mean=0.000002 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.108861 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 227 components and 0.108861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381390Jy sigma=0.000671 ! Fit after self-cal, rms=0.381454Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (85, -45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210586 Jy ! Component: 100 - total flux cleaned = 0.00331766 Jy ! Component: 150 - total flux cleaned = 0.00434831 Jy ! Component: 200 - total flux cleaned = 0.00518237 Jy ! Total flux subtracted in 200 components = 0.00518237 Jy ! Clean residual min=-0.001472 max=0.001502 Jy/beam ! Clean residual mean=0.000003 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.114044 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 256 components and 0.114044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381332Jy sigma=0.000670 ! Fit after self-cal, rms=0.381359Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.381359Jy sigma=0.000670 ! Fit after self-cal, rms=0.063681Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=8.164 mas, bpa=-4.19 degrees ! Estimated noise=417.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000636428 Jy ! Component: 100 - total flux cleaned = 0.00105528 Jy ! Component: 150 - total flux cleaned = 0.00117501 Jy ! Component: 200 - total flux cleaned = 0.00128347 Jy ! Total flux subtracted in 200 components = 0.00128347 Jy ! Clean residual min=-0.001179 max=0.001355 Jy/beam ! Clean residual mean=-0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.115327 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 281 components and 0.115327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063645Jy sigma=0.000662 ! Fit after self-cal, rms=0.063423Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117202 Jy ! Component: 100 - total flux cleaned = 0.00162957 Jy ! Component: 150 - total flux cleaned = 0.00194931 Jy ! Component: 200 - total flux cleaned = 0.00223943 Jy ! Total flux subtracted in 200 components = 0.00223943 Jy ! Clean residual min=-0.000974 max=0.001158 Jy/beam ! Clean residual mean=0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.117567 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 307 components and 0.117567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063392Jy sigma=0.000660 ! Fit after self-cal, rms=0.063389Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063389Jy sigma=0.000660 ! Fit after self-cal, rms=0.062767Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.679 mas, bmaj=12.23 mas, bpa=0.9911 degrees ! Estimated noise=496.293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000687439 Jy ! Component: 100 - total flux cleaned = 0.0012186 Jy ! Component: 150 - total flux cleaned = 0.00171705 Jy ! Component: 200 - total flux cleaned = 0.00200956 Jy ! Total flux subtracted in 200 components = 0.00200956 Jy ! Clean residual min=-0.001155 max=0.001312 Jy/beam ! Clean residual mean=0.000000 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.119576 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 337 components and 0.119576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062753Jy sigma=0.000660 ! Fit after self-cal, rms=0.062725Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345478 Jy ! Component: 100 - total flux cleaned = 0.000540075 Jy ! Component: 150 - total flux cleaned = 0.000707143 Jy ! Component: 200 - total flux cleaned = 0.000791017 Jy ! Total flux subtracted in 200 components = 0.000791017 Jy ! Clean residual min=-0.001143 max=0.001246 Jy/beam ! Clean residual mean=0.000002 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.120367 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 359 components and 0.120367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062720Jy sigma=0.000660 ! Fit after self-cal, rms=0.062718Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=8.164 mas, bpa=-4.199 degrees ! Estimated noise=416.572 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 8.164 at -4.199 degrees (North through East) ! Clean map min=-0.001599 max=0.052768 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=7.154 mas, bpa=-3.204 degrees ! Estimated noise=558.397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415551 Jy ! Component: 100 - total flux cleaned = 0.0542065 Jy ! Component: 150 - total flux cleaned = 0.0630091 Jy ! Component: 200 - total flux cleaned = 0.0698346 Jy ! Total flux subtracted in 200 components = 0.0698346 Jy ! Clean residual min=-0.003045 max=0.004065 Jy/beam ! Clean residual mean=-0.000000 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0698346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.0698346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=8.164 mas, bpa=-4.199 degrees ! Estimated noise=416.572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775834 Jy ! Component: 100 - total flux cleaned = 0.0135689 Jy ! Component: 150 - total flux cleaned = 0.0183606 Jy ! Component: 200 - total flux cleaned = 0.0223862 Jy ! Total flux subtracted in 200 components = 0.0223862 Jy ! Clean residual min=-0.002204 max=0.002470 Jy/beam ! Clean residual mean=-0.000005 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0922209 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 107 components and 0.0922209 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.679 mas, bmaj=12.23 mas, bpa=0.9911 degrees ! Estimated noise=496.293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543925 Jy ! Component: 100 - total flux cleaned = 0.00940044 Jy ! Component: 150 - total flux cleaned = 0.0125605 Jy ! Component: 200 - total flux cleaned = 0.0151219 Jy ! Total flux subtracted in 200 components = 0.0151219 Jy ! Clean residual min=-0.001997 max=0.001814 Jy/beam ! Clean residual mean=-0.000005 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.107343 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212441 Jy ! Component: 100 - total flux cleaned = 0.00394615 Jy ! Component: 150 - total flux cleaned = 0.00540298 Jy ! Component: 200 - total flux cleaned = 0.00656646 Jy ! Total flux subtracted in 200 components = 0.00656646 Jy ! Clean residual min=-0.001664 max=0.001376 Jy/beam ! Clean residual mean=-0.000003 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.113909 Jy ! Adding 125 model components to the UV plane model. ! The established model now contains 225 components and 0.113909 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=8.164 mas, bpa=-4.199 degrees ! Estimated noise=416.572 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000724347 Jy ! Component: 100 - total flux cleaned = 0.00125289 Jy ! Component: 150 - total flux cleaned = 0.00164577 Jy ! Component: 200 - total flux cleaned = 0.00204921 Jy ! Total flux subtracted in 200 components = 0.00204921 Jy ! Clean residual min=-0.001255 max=0.001277 Jy/beam ! Clean residual mean=-0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.115958 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 255 components and 0.115958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062853Jy sigma=0.000661 ! Fit after self-cal, rms=0.062833Jy sigma=0.000660 wmodel J1159+0112_S_2017_02_24_pus_map.mod ! Writing 255 model components to file: J1159+0112_S_2017_02_24_pus_map.mod wobs J1159+0112_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1159+0112_S_2017_02_24_pus_uvs.fits wwins J1159+0112_S_2017_02_24_pus_map.win ! wwins: Wrote 7 windows to J1159+0112_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.43626e-05 Jy ! Component: 100 - total flux cleaned = 3.83259e-06 Jy ! Component: 150 - total flux cleaned = 2.26309e-05 Jy ! Component: 200 - total flux cleaned = 5.91212e-05 Jy ! Component: 250 - total flux cleaned = 9.43236e-05 Jy ! Component: 300 - total flux cleaned = 9.42807e-05 Jy ! Component: 350 - total flux cleaned = 0.000161204 Jy ! Component: 400 - total flux cleaned = 0.000127922 Jy ! Component: 450 - total flux cleaned = 0.000144041 Jy ! Component: 500 - total flux cleaned = 0.000206536 Jy ! Component: 550 - total flux cleaned = 0.000190898 Jy ! Component: 600 - total flux cleaned = 0.000191093 Jy ! Component: 650 - total flux cleaned = 0.000221143 Jy ! Component: 700 - total flux cleaned = 0.000264997 Jy ! Component: 750 - total flux cleaned = 0.000279381 Jy ! Component: 800 - total flux cleaned = 0.000322045 Jy ! Component: 850 - total flux cleaned = 0.000322216 Jy ! Component: 900 - total flux cleaned = 0.000432771 Jy ! Component: 950 - total flux cleaned = 0.000432744 Jy ! Component: 1000 - total flux cleaned = 0.000486368 Jy ! Component: 1050 - total flux cleaned = 0.000552477 Jy ! Component: 1100 - total flux cleaned = 0.000565446 Jy ! Component: 1150 - total flux cleaned = 0.000604153 Jy ! Component: 1200 - total flux cleaned = 0.0006043 Jy ! Component: 1250 - total flux cleaned = 0.000654358 Jy ! Component: 1300 - total flux cleaned = 0.000617208 Jy ! Component: 1350 - total flux cleaned = 0.000617232 Jy ! Component: 1400 - total flux cleaned = 0.00058114 Jy ! Component: 1450 - total flux cleaned = 0.000569573 Jy ! Component: 1500 - total flux cleaned = 0.000534376 Jy ! Component: 1550 - total flux cleaned = 0.000522959 Jy ! Component: 1600 - total flux cleaned = 0.00055778 Jy ! Component: 1650 - total flux cleaned = 0.00058043 Jy ! Component: 1700 - total flux cleaned = 0.000546272 Jy ! Component: 1750 - total flux cleaned = 0.000523934 Jy ! Component: 1800 - total flux cleaned = 0.0004907 Jy ! Component: 1850 - total flux cleaned = 0.000425189 Jy ! Component: 1900 - total flux cleaned = 0.000425131 Jy ! Component: 1950 - total flux cleaned = 0.00037169 Jy ! Component: 2000 - total flux cleaned = 0.000361103 Jy ! Component: 2050 - total flux cleaned = 0.000329478 Jy ! Component: 2100 - total flux cleaned = 0.000277565 Jy ! Component: 2150 - total flux cleaned = 0.000236211 Jy ! Component: 2200 - total flux cleaned = 0.000205615 Jy ! Component: 2250 - total flux cleaned = 0.000144848 Jy ! Component: 2300 - total flux cleaned = 0.000124586 Jy ! Component: 2350 - total flux cleaned = 0.000104781 Jy ! Component: 2400 - total flux cleaned = 7.52529e-05 Jy ! Component: 2450 - total flux cleaned = 6.55714e-05 Jy ! Component: 2500 - total flux cleaned = 4.6175e-05 Jy ! Component: 2550 - total flux cleaned = 2.68754e-05 Jy ! Component: 2600 - total flux cleaned = 7.82777e-06 Jy ! Component: 2650 - total flux cleaned = 2.66599e-05 Jy ! Component: 2700 - total flux cleaned = -2.95937e-05 Jy ! Component: 2750 - total flux cleaned = -2.02771e-05 Jy ! Component: 2800 - total flux cleaned = 1.66286e-05 Jy ! Component: 2850 - total flux cleaned = -5.66565e-05 Jy ! Component: 2900 - total flux cleaned = -3.85199e-05 Jy ! Component: 2950 - total flux cleaned = -2.9493e-05 Jy ! Component: 3000 - total flux cleaned = -5.63278e-05 Jy ! Component: 3050 - total flux cleaned = -7.4073e-05 Jy ! Component: 3100 - total flux cleaned = -9.18198e-05 Jy ! Component: 3150 - total flux cleaned = -0.000109239 Jy ! Component: 3200 - total flux cleaned = -0.000117956 Jy ! Component: 3250 - total flux cleaned = -0.000109368 Jy ! Component: 3300 - total flux cleaned = -0.000160899 Jy ! Component: 3350 - total flux cleaned = -0.000143904 Jy ! Component: 3400 - total flux cleaned = -0.000202883 Jy ! Component: 3450 - total flux cleaned = -0.000227941 Jy ! Component: 3500 - total flux cleaned = -0.000244564 Jy ! Component: 3550 - total flux cleaned = -0.00024464 Jy ! Component: 3600 - total flux cleaned = -0.000277454 Jy ! Component: 3650 - total flux cleaned = -0.000318196 Jy ! Component: 3700 - total flux cleaned = -0.000334279 Jy ! Component: 3750 - total flux cleaned = -0.000334289 Jy ! Component: 3800 - total flux cleaned = -0.000350282 Jy ! Component: 3850 - total flux cleaned = -0.000397811 Jy ! Component: 3900 - total flux cleaned = -0.000397873 Jy ! Component: 3950 - total flux cleaned = -0.00043703 Jy ! Component: 4000 - total flux cleaned = -0.000468136 Jy ! Component: 4050 - total flux cleaned = -0.00049132 Jy ! Total flux subtracted in 4096 components = -0.000476005 Jy ! Clean residual min=-0.000517 max=0.000468 Jy/beam ! Clean residual mean=0.000000 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.115482 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 534 components and 0.115482 Jy ![Exited script file: muppet] wmap "J1159+0112_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 8.164 at -4.199 degrees (North through East) ! Clean map min=-0.00088331 max=0.051657 Jy/beam ! Writing clean map to FITS file: J1159+0112_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0516565 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143793 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.835092 0.835092 1.67018 3.34037 6.68073 13.3615 26.7229 53.4459 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.465 x 8.164 at -4.199 degrees (North through East) ! Clean map min=-0.00088331 max=0.051657 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1159+0112_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:26:46 2019