! Started logfile: J1158+2450_X_2017_05_01_pus_uvs.log on Wed May 1 19:56:18 2019 obs J1158+2450_X_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1158+2450_X_2017_05_01_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980122 visibilities/baseline/integration-bin. ! Found source: J1158+2450 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 863 lines of history. ! ! Reading 115380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1158+2450_X_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.740466Jy sigma=0.006547 ! Fit after self-cal, rms=0.706333Jy sigma=0.006268 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.742 mas, bmaj=1.467 mas, bpa=-0.686 degrees ! Estimated noise=525.675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217079 Jy ! Component: 100 - total flux cleaned = 0.290885 Jy ! Total flux subtracted in 100 components = 0.290885 Jy ! Clean residual min=-0.012348 max=0.032736 Jy/beam ! Clean residual mean=-0.000210 rms=0.003598 Jy/beam ! Combined flux in latest and established models = 0.290884 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.290884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119900Jy sigma=0.001053 ! Fit after self-cal, rms=0.119854Jy sigma=0.001052 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355506 Jy ! Component: 100 - total flux cleaned = 0.0545356 Jy ! Total flux subtracted in 100 components = 0.0545356 Jy ! Clean residual min=-0.009357 max=0.017312 Jy/beam ! Clean residual mean=-0.000168 rms=0.002534 Jy/beam ! Combined flux in latest and established models = 0.34542 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 0.34542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105563Jy sigma=0.000905 ! Fit after self-cal, rms=0.105499Jy sigma=0.000904 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-2.8, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182977 Jy ! Component: 100 - total flux cleaned = 0.0301642 Jy ! Total flux subtracted in 100 components = 0.0301642 Jy ! Clean residual min=-0.008345 max=0.014988 Jy/beam ! Clean residual mean=-0.000146 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.375584 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.375584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100238Jy sigma=0.000847 ! Fit after self-cal, rms=0.100051Jy sigma=0.000846 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (1.2, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135949 Jy ! Component: 100 - total flux cleaned = 0.0225973 Jy ! Total flux subtracted in 100 components = 0.0225973 Jy ! Clean residual min=-0.006921 max=0.013837 Jy/beam ! Clean residual mean=-0.000127 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.398181 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.398181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097047Jy sigma=0.000815 ! Fit after self-cal, rms=0.096955Jy sigma=0.000814 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-1.2, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129283 Jy ! Component: 100 - total flux cleaned = 0.020881 Jy ! Total flux subtracted in 100 components = 0.020881 Jy ! Clean residual min=-0.006552 max=0.008909 Jy/beam ! Clean residual mean=-0.000109 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.419062 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.419062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094097Jy sigma=0.000785 ! Fit after self-cal, rms=0.094003Jy sigma=0.000784 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9551 mas, bmaj=1.766 mas, bpa=-1.629 degrees ! Estimated noise=236.992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139041 Jy ! Component: 100 - total flux cleaned = 0.0242196 Jy ! Component: 150 - total flux cleaned = 0.0324762 Jy ! Component: 200 - total flux cleaned = 0.0392359 Jy ! Total flux subtracted in 200 components = 0.0392359 Jy ! Clean residual min=-0.008471 max=0.015884 Jy/beam ! Clean residual mean=-0.000217 rms=0.002664 Jy/beam ! Combined flux in latest and established models = 0.458298 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 102 components and 0.458298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091244Jy sigma=0.000755 ! Fit after self-cal, rms=0.091086Jy sigma=0.000753 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (1.6, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169418 Jy ! Component: 100 - total flux cleaned = 0.0280482 Jy ! Component: 150 - total flux cleaned = 0.0367619 Jy ! Component: 200 - total flux cleaned = 0.044217 Jy ! Total flux subtracted in 200 components = 0.044217 Jy ! Clean residual min=-0.006169 max=0.007527 Jy/beam ! Clean residual mean=-0.000179 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.502515 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 166 components and 0.502515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087325Jy sigma=0.000711 ! Fit after self-cal, rms=0.087213Jy sigma=0.000710 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00 KP 1.01 ! LA 0.91 MK 0.96 NL 0.96 OV 1.01 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.97 KP 1.00 ! LA 0.91 MK 0.99 NL 0.96 OV 1.00 ! PT 0.97 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.98 KP 1.01 ! LA 0.93 MK 1.00 NL 0.97 OV 1.00 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.01 KP 1.01 ! LA 0.93 MK 1.00 NL 0.96 OV 1.01 ! PT 0.96 SC 1.08 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.96 KP 1.02 ! LA 0.92 MK 1.03 NL 0.99 OV 1.01 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.00 KP 1.01 ! LA 0.94 MK 1.01 NL 1.00 OV 1.01 ! PT 0.95 SC 1.07 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 1.02 ! LA 0.95 MK 1.02 NL 0.98 OV 1.02 ! PT 0.96 SC 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.99 KP 1.01 ! LA 0.93 MK 1.00 NL 0.99 OV 1.02 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.02 ! LA 0.94 MK 0.99 NL 0.99 OV 1.02 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.00 KP 1.02 ! LA 0.96 MK 1.01 NL 0.99 OV 1.03 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.10 KP 1.08 ! LA 1.01 MK 1.04 NL 1.06 OV 1.07 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.00 KP 0.99 ! LA 0.94 MK 0.98 NL 1.01 OV 1.02 ! PT 0.98 SC 1.04 ! ! ! Fit before self-cal, rms=0.087213Jy sigma=0.000710 ! Fit after self-cal, rms=0.084832Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9668 mas, bmaj=1.784 mas, bpa=-2.282 degrees ! Estimated noise=234.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743464 Jy ! Component: 100 - total flux cleaned = 0.0129472 Jy ! Component: 150 - total flux cleaned = 0.0174645 Jy ! Component: 200 - total flux cleaned = 0.0213311 Jy ! Total flux subtracted in 200 components = 0.0213311 Jy ! Clean residual min=-0.003925 max=0.005962 Jy/beam ! Clean residual mean=-0.000077 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.523847 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 201 components and 0.523846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083986Jy sigma=0.000675 ! Fit after self-cal, rms=0.083991Jy sigma=0.000675 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083991Jy sigma=0.000675 ! Fit after self-cal, rms=0.084653Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.966 mas, bmaj=1.779 mas, bpa=-1.604 degrees ! Estimated noise=234.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386835 Jy ! Component: 100 - total flux cleaned = 0.00699371 Jy ! Component: 150 - total flux cleaned = 0.00965697 Jy ! Component: 200 - total flux cleaned = 0.011958 Jy ! Total flux subtracted in 200 components = 0.011958 Jy ! Clean residual min=-0.003233 max=0.005018 Jy/beam ! Clean residual mean=-0.000055 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.535804 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 225 components and 0.535804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084394Jy sigma=0.000668 ! Fit after self-cal, rms=0.084397Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503766 Jy ! Component: 100 - total flux cleaned = 0.00809363 Jy ! Component: 150 - total flux cleaned = 0.0105514 Jy ! Component: 200 - total flux cleaned = 0.012694 Jy ! Total flux subtracted in 200 components = 0.012694 Jy ! Clean residual min=-0.002698 max=0.004406 Jy/beam ! Clean residual mean=-0.000040 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.548498 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 251 components and 0.548499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084064Jy sigma=0.000664 ! Fit after self-cal, rms=0.084043Jy sigma=0.000664 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-0.4, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393201 Jy ! Component: 100 - total flux cleaned = 0.00638988 Jy ! Component: 150 - total flux cleaned = 0.00846046 Jy ! Component: 200 - total flux cleaned = 0.0103065 Jy ! Total flux subtracted in 200 components = 0.0103065 Jy ! Clean residual min=-0.002371 max=0.003156 Jy/beam ! Clean residual mean=-0.000031 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.558805 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 276 components and 0.558805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083826Jy sigma=0.000661 ! Fit after self-cal, rms=0.083815Jy sigma=0.000661 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083815Jy sigma=0.000661 ! Fit after self-cal, rms=0.083745Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9651 mas, bmaj=1.778 mas, bpa=-1.563 degrees ! Estimated noise=233.831 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234173 Jy ! Component: 100 - total flux cleaned = 0.00424441 Jy ! Component: 150 - total flux cleaned = 0.00594587 Jy ! Component: 200 - total flux cleaned = 0.00749632 Jy ! Total flux subtracted in 200 components = 0.00749632 Jy ! Clean residual min=-0.002148 max=0.003111 Jy/beam ! Clean residual mean=-0.000036 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.566302 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 299 components and 0.566302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083644Jy sigma=0.000659 ! Fit after self-cal, rms=0.083639Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.2, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320531 Jy ! Component: 100 - total flux cleaned = 0.00508895 Jy ! Component: 150 - total flux cleaned = 0.00666767 Jy ! Component: 200 - total flux cleaned = 0.00809351 Jy ! Total flux subtracted in 200 components = 0.00809351 Jy ! Clean residual min=-0.001887 max=0.002967 Jy/beam ! Clean residual mean=-0.000029 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.574395 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 327 components and 0.574395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083505Jy sigma=0.000657 ! Fit after self-cal, rms=0.083499Jy sigma=0.000657 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-2.2, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279522 Jy ! Component: 100 - total flux cleaned = 0.00439764 Jy ! Component: 150 - total flux cleaned = 0.00572638 Jy ! Component: 200 - total flux cleaned = 0.00682242 Jy ! Total flux subtracted in 200 components = 0.00682242 Jy ! Clean residual min=-0.001807 max=0.002057 Jy/beam ! Clean residual mean=-0.000020 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.581218 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 354 components and 0.581217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083391Jy sigma=0.000656 ! Fit after self-cal, rms=0.083386Jy sigma=0.000656 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083386Jy sigma=0.000656 ! Fit after self-cal, rms=0.083389Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.187 mas, bmaj=2.803 mas, bpa=-0.3 degrees ! Estimated noise=280.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284233 Jy ! Component: 100 - total flux cleaned = 0.00507567 Jy ! Component: 150 - total flux cleaned = 0.00698245 Jy ! Component: 200 - total flux cleaned = 0.00864365 Jy ! Total flux subtracted in 200 components = 0.00864365 Jy ! Clean residual min=-0.002674 max=0.002950 Jy/beam ! Clean residual mean=-0.000057 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.589861 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 375 components and 0.589861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083342Jy sigma=0.000655 ! Fit after self-cal, rms=0.083333Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165936 Jy ! Component: 100 - total flux cleaned = 0.00305432 Jy ! Component: 150 - total flux cleaned = 0.00429799 Jy ! Component: 200 - total flux cleaned = 0.00541282 Jy ! Total flux subtracted in 200 components = 0.00541282 Jy ! Clean residual min=-0.002550 max=0.002759 Jy/beam ! Clean residual mean=-0.000043 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.595274 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 387 components and 0.595274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083321Jy sigma=0.000655 ! Fit after self-cal, rms=0.083318Jy sigma=0.000655 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9655 mas, bmaj=1.779 mas, bpa=-1.529 degrees ! Estimated noise=233.826 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9655 x 1.779 at -1.529 degrees (North through East) ! Clean map min=-0.0016292 max=0.29687 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7485 mas, bmaj=1.474 mas, bpa=-0.5369 degrees ! Estimated noise=523.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215721 Jy ! Component: 100 - total flux cleaned = 0.287834 Jy ! Component: 150 - total flux cleaned = 0.322804 Jy ! Component: 200 - total flux cleaned = 0.34623 Jy ! Total flux subtracted in 200 components = 0.34623 Jy ! Clean residual min=-0.008454 max=0.013874 Jy/beam ! Clean residual mean=-0.000151 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.34623 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.34623 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9655 mas, bmaj=1.779 mas, bpa=-1.529 degrees ! Estimated noise=233.826 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293487 Jy ! Component: 100 - total flux cleaned = 0.0511278 Jy ! Component: 150 - total flux cleaned = 0.0692577 Jy ! Component: 200 - total flux cleaned = 0.0847354 Jy ! Total flux subtracted in 200 components = 0.0847354 Jy ! Clean residual min=-0.007147 max=0.009741 Jy/beam ! Clean residual mean=-0.000219 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.430965 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 66 components and 0.430965 Jy ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.187 mas, bmaj=2.803 mas, bpa=-0.3 degrees ! Estimated noise=280.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247418 Jy ! Component: 100 - total flux cleaned = 0.04343 Jy ! Component: 150 - total flux cleaned = 0.0586005 Jy ! Component: 200 - total flux cleaned = 0.0712503 Jy ! Total flux subtracted in 200 components = 0.0712503 Jy ! Clean residual min=-0.006942 max=0.007770 Jy/beam ! Clean residual mean=-0.000269 rms=0.002770 Jy/beam ! Combined flux in latest and established models = 0.502216 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010699 Jy ! Component: 100 - total flux cleaned = 0.0198668 Jy ! Component: 150 - total flux cleaned = 0.0278267 Jy ! Component: 200 - total flux cleaned = 0.0348149 Jy ! Total flux subtracted in 200 components = 0.0348149 Jy ! Clean residual min=-0.004435 max=0.005251 Jy/beam ! Clean residual mean=-0.000180 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.537031 Jy ! Adding 167 model components to the UV plane model. ! The established model now contains 222 components and 0.537031 Jy ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.9655 mas, bmaj=1.779 mas, bpa=-1.529 degrees ! Estimated noise=233.826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004806 Jy ! Component: 100 - total flux cleaned = 0.00881187 Jy ! Component: 150 - total flux cleaned = 0.0124191 Jy ! Component: 200 - total flux cleaned = 0.0157231 Jy ! Total flux subtracted in 200 components = 0.0157231 Jy ! Clean residual min=-0.002486 max=0.003638 Jy/beam ! Clean residual mean=-0.000060 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.552754 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 257 components and 0.552754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084077Jy sigma=0.000662 ! Fit after self-cal, rms=0.083988Jy sigma=0.000661 wmodel J1158+2450_X_2017_05_01_pus_map.mod ! Writing 257 model components to file: J1158+2450_X_2017_05_01_pus_map.mod wobs J1158+2450_X_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1158+2450_X_2017_05_01_pus_uvs.fits wwins J1158+2450_X_2017_05_01_pus_map.win ! wwins: Wrote 9 windows to J1158+2450_X_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146736 Jy ! Component: 100 - total flux cleaned = 0.00268978 Jy ! Component: 150 - total flux cleaned = 0.00378364 Jy ! Component: 200 - total flux cleaned = 0.00469023 Jy ! Component: 250 - total flux cleaned = 0.00539605 Jy ! Component: 300 - total flux cleaned = 0.00607808 Jy ! Component: 350 - total flux cleaned = 0.00670057 Jy ! Component: 400 - total flux cleaned = 0.00730588 Jy ! Component: 450 - total flux cleaned = 0.00800575 Jy ! Component: 500 - total flux cleaned = 0.00854505 Jy ! Component: 550 - total flux cleaned = 0.00910802 Jy ! Component: 600 - total flux cleaned = 0.00952202 Jy ! Component: 650 - total flux cleaned = 0.00992934 Jy ! Component: 700 - total flux cleaned = 0.0102954 Jy ! Component: 750 - total flux cleaned = 0.0106558 Jy ! Component: 800 - total flux cleaned = 0.0111061 Jy ! Component: 850 - total flux cleaned = 0.0114221 Jy ! Component: 900 - total flux cleaned = 0.0117955 Jy ! Component: 950 - total flux cleaned = 0.0120404 Jy ! Component: 1000 - total flux cleaned = 0.0122809 Jy ! Component: 1050 - total flux cleaned = 0.0124592 Jy ! Component: 1100 - total flux cleaned = 0.0126047 Jy ! Component: 1150 - total flux cleaned = 0.0127778 Jy ! Component: 1200 - total flux cleaned = 0.01292 Jy ! Component: 1250 - total flux cleaned = 0.0131162 Jy ! Component: 1300 - total flux cleaned = 0.0132541 Jy ! Component: 1350 - total flux cleaned = 0.0133897 Jy ! Component: 1400 - total flux cleaned = 0.0134161 Jy ! Component: 1450 - total flux cleaned = 0.013601 Jy ! Component: 1500 - total flux cleaned = 0.0136532 Jy ! Component: 1550 - total flux cleaned = 0.0137818 Jy ! Component: 1600 - total flux cleaned = 0.013833 Jy ! Component: 1650 - total flux cleaned = 0.0139847 Jy ! Component: 1700 - total flux cleaned = 0.0141589 Jy ! Component: 1750 - total flux cleaned = 0.014257 Jy ! Component: 1800 - total flux cleaned = 0.0143302 Jy ! Component: 1850 - total flux cleaned = 0.0145222 Jy ! Component: 1900 - total flux cleaned = 0.0147116 Jy ! Component: 1950 - total flux cleaned = 0.0147814 Jy ! Component: 2000 - total flux cleaned = 0.0148042 Jy ! Total flux subtracted in 2048 components = 0.0149193 Jy ! Clean residual min=-0.001268 max=0.001307 Jy/beam ! Clean residual mean=-0.000037 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.567673 Jy keep ! Adding 174 model components to the UV plane model. ! The established model now contains 421 components and 0.567673 Jy ![Exited script file: muppet] wmap "J1158+2450_X_2017_05_01_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9655 x 1.779 at -1.529 degrees (North through East) ! Clean map min=-0.0015341 max=0.29784 Jy/beam ! Writing clean map to FITS file: J1158+2450_X_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.29784 invert ! Inverting map ! Your choice of large map pixels excluded 0.125% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000486211 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.489736 0.489736 0.979473 1.95895 3.91789 7.83578 15.6716 31.3431 62.6863 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.297 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9655 x 1.779 at -1.529 degrees (North through East) ! Clean map min=-0.0015341 max=0.29784 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1158+2450_X_2017_05_01_pus_uvs.log closed on Wed May 1 19:56:27 2019