! Started logfile: J1155-2949_S_2017_10_09_pus_uvs.log on Sun May 12 13:11:43 2019 obs J1155-2949_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1155-2949_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.608238 visibilities/baseline/integration-bin. ! Found source: J1155-2949 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12700 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1155-2949_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 423 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 452 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 935 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968937Jy sigma=0.006443 ! Fit after self-cal, rms=0.931016Jy sigma=0.006215 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=14.31 mas, bpa=-18.97 degrees ! Estimated noise=2044.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518104 Jy ! Component: 100 - total flux cleaned = 0.0644198 Jy ! Total flux subtracted in 100 components = 0.0644198 Jy ! Clean residual min=-0.006537 max=0.008945 Jy/beam ! Clean residual mean=0.000008 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.0644198 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0644198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104758Jy sigma=0.000643 ! Fit after self-cal, rms=0.103966Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=17.3 mas, bpa=-19.96 degrees ! Estimated noise=1197.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141659 Jy ! Component: 100 - total flux cleaned = 0.0223335 Jy ! Component: 150 - total flux cleaned = 0.0275349 Jy ! Component: 200 - total flux cleaned = 0.0308854 Jy ! Total flux subtracted in 200 components = 0.0308854 Jy ! Clean residual min=-0.006264 max=0.008511 Jy/beam ! Clean residual mean=-0.000045 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.0953052 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 51 components and 0.0953052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101970Jy sigma=0.000624 ! Fit after self-cal, rms=0.102005Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.94 HN 1.00 KP 1.06 ! LA 0.92 MK 0.98 NL 1.32 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.85 FD 1.08 HN 1.04 KP 1.05 ! LA 0.86 MK 1.07 NL 1.24 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.05 HN 0.96 KP 0.94 ! LA 0.70 MK 1.06 NL 1.41 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.71 KP 1.00* ! LA 1.00* MK 0.92 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.102005Jy sigma=0.000623 ! Fit after self-cal, rms=0.107851Jy sigma=0.000618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=17.7 mas, bpa=-20.01 degrees ! Estimated noise=1233.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89737e-05 Jy ! Component: 100 - total flux cleaned = -4.80293e-05 Jy ! Component: 150 - total flux cleaned = -4.75742e-05 Jy ! Component: 200 - total flux cleaned = -4.9228e-05 Jy ! Total flux subtracted in 200 components = -4.9228e-05 Jy ! Clean residual min=-0.004626 max=0.004622 Jy/beam ! Clean residual mean=0.000001 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.0952559 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.0952559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107825Jy sigma=0.000618 ! Fit after self-cal, rms=0.108402Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108402Jy sigma=0.000617 ! Fit after self-cal, rms=0.112723Jy sigma=0.000616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=17.77 mas, bpa=-20.09 degrees ! Estimated noise=1238.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.25204e-05 Jy ! Component: 100 - total flux cleaned = -5.36259e-05 Jy ! Component: 150 - total flux cleaned = -0.000108761 Jy ! Component: 200 - total flux cleaned = -0.000159908 Jy ! Total flux subtracted in 200 components = -0.000159908 Jy ! Clean residual min=-0.004309 max=0.004116 Jy/beam ! Clean residual mean=0.000010 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.095096 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.095096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112698Jy sigma=0.000616 ! Fit after self-cal, rms=0.112908Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137312 Jy ! Component: 100 - total flux cleaned = 8.18246e-05 Jy ! Component: 150 - total flux cleaned = 3.2289e-05 Jy ! Component: 200 - total flux cleaned = 9.47039e-06 Jy ! Total flux subtracted in 200 components = 9.47039e-06 Jy ! Clean residual min=-0.004213 max=0.004187 Jy/beam ! Clean residual mean=0.000010 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.0951055 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.0951055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112892Jy sigma=0.000616 ! Fit after self-cal, rms=0.112894Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112894Jy sigma=0.000616 ! Fit after self-cal, rms=0.116885Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=17.7 mas, bpa=-20.36 degrees ! Estimated noise=1239.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386543 Jy ! Component: 100 - total flux cleaned = 0.000282821 Jy ! Component: 150 - total flux cleaned = 0.000225556 Jy ! Component: 200 - total flux cleaned = 0.000150809 Jy ! Total flux subtracted in 200 components = 0.000150809 Jy ! Clean residual min=-0.003300 max=0.003683 Jy/beam ! Clean residual mean=0.000017 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0952563 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 84 components and 0.0952563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116852Jy sigma=0.000615 ! Fit after self-cal, rms=0.117066Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.3266e-05 Jy ! Component: 100 - total flux cleaned = 5.97394e-07 Jy ! Component: 150 - total flux cleaned = -4.41553e-05 Jy ! Component: 200 - total flux cleaned = -4.54645e-05 Jy ! Total flux subtracted in 200 components = -4.54645e-05 Jy ! Clean residual min=-0.003628 max=0.003656 Jy/beam ! Clean residual mean=0.000017 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.0952109 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 88 components and 0.0952108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117046Jy sigma=0.000615 ! Fit after self-cal, rms=0.117024Jy sigma=0.000615 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117024Jy sigma=0.000615 ! Fit after self-cal, rms=0.117928Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.286 mas, bmaj=30.38 mas, bpa=-9.92 degrees ! Estimated noise=1451.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.75819e-06 Jy ! Component: 100 - total flux cleaned = 9.83069e-07 Jy ! Component: 150 - total flux cleaned = 2.11045e-05 Jy ! Component: 200 - total flux cleaned = 2.24255e-05 Jy ! Total flux subtracted in 200 components = 2.24255e-05 Jy ! Clean residual min=-0.003592 max=0.003896 Jy/beam ! Clean residual mean=0.000033 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.0952333 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 89 components and 0.0952333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117915Jy sigma=0.000614 ! Fit after self-cal, rms=0.117931Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.09671e-05 Jy ! Component: 100 - total flux cleaned = -2.16261e-05 Jy ! Component: 150 - total flux cleaned = -5.77473e-06 Jy ! Component: 200 - total flux cleaned = -5.69688e-06 Jy ! Total flux subtracted in 200 components = -5.69688e-06 Jy ! Clean residual min=-0.003582 max=0.003910 Jy/beam ! Clean residual mean=0.000032 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.0952276 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 93 components and 0.0952276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117925Jy sigma=0.000614 ! Fit after self-cal, rms=0.117953Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=17.6 mas, bpa=-20.54 degrees ! Estimated noise=1235.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 17.6 at -20.54 degrees (North through East) ! Clean map min=-0.0033777 max=0.066346 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=14.21 mas, bpa=-19.46 degrees ! Estimated noise=2190.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0537988 Jy ! Component: 100 - total flux cleaned = 0.0682307 Jy ! Component: 150 - total flux cleaned = 0.0757634 Jy ! Component: 200 - total flux cleaned = 0.0809255 Jy ! Total flux subtracted in 200 components = 0.0809255 Jy ! Clean residual min=-0.005495 max=0.005783 Jy/beam ! Clean residual mean=0.000016 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.0809255 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0809255 Jy ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=17.6 mas, bpa=-20.54 degrees ! Estimated noise=1235.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642379 Jy ! Component: 100 - total flux cleaned = 0.00973139 Jy ! Component: 150 - total flux cleaned = 0.0108647 Jy ! Component: 200 - total flux cleaned = 0.0114497 Jy ! Total flux subtracted in 200 components = 0.0114497 Jy ! Clean residual min=-0.003325 max=0.003514 Jy/beam ! Clean residual mean=0.000012 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.0923753 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 69 components and 0.0923753 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.286 mas, bmaj=30.38 mas, bpa=-9.92 degrees ! Estimated noise=1451.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152152 Jy ! Component: 100 - total flux cleaned = 0.00186738 Jy ! Component: 150 - total flux cleaned = 0.00195428 Jy ! Component: 200 - total flux cleaned = 0.00195186 Jy ! Total flux subtracted in 200 components = 0.00195186 Jy ! Clean residual min=-0.003369 max=0.003764 Jy/beam ! Clean residual mean=0.000024 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.0943271 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.97981e-05 Jy ! Component: 100 - total flux cleaned = 5.67289e-05 Jy ! Component: 150 - total flux cleaned = 8.31716e-05 Jy ! Component: 200 - total flux cleaned = 0.00013231 Jy ! Total flux subtracted in 200 components = 0.00013231 Jy ! Clean residual min=-0.003441 max=0.003762 Jy/beam ! Clean residual mean=0.000025 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.0944594 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 116 components and 0.0944594 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=17.6 mas, bpa=-20.54 degrees ! Estimated noise=1235.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000526211 Jy ! Component: 100 - total flux cleaned = -0.000705957 Jy ! Component: 150 - total flux cleaned = -0.000785586 Jy ! Component: 200 - total flux cleaned = -0.000856754 Jy ! Total flux subtracted in 200 components = -0.000856754 Jy ! Clean residual min=-0.003363 max=0.003339 Jy/beam ! Clean residual mean=0.000013 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.0936027 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.0936027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117761Jy sigma=0.000614 ! Fit after self-cal, rms=0.117418Jy sigma=0.000613 wmodel J1155-2949_S_2017_10_09_pus_map.mod ! Writing 134 model components to file: J1155-2949_S_2017_10_09_pus_map.mod wobs J1155-2949_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1155-2949_S_2017_10_09_pus_uvs.fits wwins J1155-2949_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1155-2949_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191163 Jy ! Component: 100 - total flux cleaned = 0.000252698 Jy ! Component: 150 - total flux cleaned = 0.000307223 Jy ! Component: 200 - total flux cleaned = 0.000358053 Jy ! Component: 250 - total flux cleaned = 0.000310752 Jy ! Component: 300 - total flux cleaned = 0.000177991 Jy ! Component: 350 - total flux cleaned = 5.17568e-05 Jy ! Component: 400 - total flux cleaned = 5.11377e-05 Jy ! Component: 450 - total flux cleaned = 0.000128881 Jy ! Component: 500 - total flux cleaned = 1.59088e-05 Jy ! Component: 550 - total flux cleaned = 1.70825e-05 Jy ! Component: 600 - total flux cleaned = -1.78778e-05 Jy ! Component: 650 - total flux cleaned = -0.000121413 Jy ! Component: 700 - total flux cleaned = -0.000188771 Jy ! Component: 750 - total flux cleaned = -0.000318912 Jy ! Component: 800 - total flux cleaned = -0.0003183 Jy ! Component: 850 - total flux cleaned = -0.000473399 Jy ! Component: 900 - total flux cleaned = -0.000685456 Jy ! Component: 950 - total flux cleaned = -0.000744431 Jy ! Component: 1000 - total flux cleaned = -0.00083143 Jy ! Component: 1050 - total flux cleaned = -0.00083179 Jy ! Component: 1100 - total flux cleaned = -0.000859741 Jy ! Component: 1150 - total flux cleaned = -0.00102349 Jy ! Component: 1200 - total flux cleaned = -0.00102341 Jy ! Component: 1250 - total flux cleaned = -0.00112923 Jy ! Component: 1300 - total flux cleaned = -0.00118124 Jy ! Component: 1350 - total flux cleaned = -0.001207 Jy ! Component: 1400 - total flux cleaned = -0.00138424 Jy ! Component: 1450 - total flux cleaned = -0.00143386 Jy ! Component: 1500 - total flux cleaned = -0.00148297 Jy ! Component: 1550 - total flux cleaned = -0.00148293 Jy ! Component: 1600 - total flux cleaned = -0.00145855 Jy ! Component: 1650 - total flux cleaned = -0.00148206 Jy ! Component: 1700 - total flux cleaned = -0.00148204 Jy ! Component: 1750 - total flux cleaned = -0.00157381 Jy ! Component: 1800 - total flux cleaned = -0.00152833 Jy ! Component: 1850 - total flux cleaned = -0.00159571 Jy ! Component: 1900 - total flux cleaned = -0.0015956 Jy ! Component: 1950 - total flux cleaned = -0.00159564 Jy ! Component: 2000 - total flux cleaned = -0.00166058 Jy ! Component: 2050 - total flux cleaned = -0.00166056 Jy ! Component: 2100 - total flux cleaned = -0.00168168 Jy ! Component: 2150 - total flux cleaned = -0.00170276 Jy ! Component: 2200 - total flux cleaned = -0.00170263 Jy ! Component: 2250 - total flux cleaned = -0.00172336 Jy ! Component: 2300 - total flux cleaned = -0.00176429 Jy ! Component: 2350 - total flux cleaned = -0.00190524 Jy ! Component: 2400 - total flux cleaned = -0.0019051 Jy ! Component: 2450 - total flux cleaned = -0.00194468 Jy ! Component: 2500 - total flux cleaned = -0.00200346 Jy ! Component: 2550 - total flux cleaned = -0.00204231 Jy ! Component: 2600 - total flux cleaned = -0.0021188 Jy ! Component: 2650 - total flux cleaned = -0.00217582 Jy ! Component: 2700 - total flux cleaned = -0.00221348 Jy ! Component: 2750 - total flux cleaned = -0.00230709 Jy ! Component: 2800 - total flux cleaned = -0.00238099 Jy ! Component: 2850 - total flux cleaned = -0.0023994 Jy ! Component: 2900 - total flux cleaned = -0.00243569 Jy ! Component: 2950 - total flux cleaned = -0.00243566 Jy ! Component: 3000 - total flux cleaned = -0.00248941 Jy ! Component: 3050 - total flux cleaned = -0.00254268 Jy ! Component: 3100 - total flux cleaned = -0.00259544 Jy ! Component: 3150 - total flux cleaned = -0.00266538 Jy ! Component: 3200 - total flux cleaned = -0.00269997 Jy ! Component: 3250 - total flux cleaned = -0.00276913 Jy ! Component: 3300 - total flux cleaned = -0.00285466 Jy ! Component: 3350 - total flux cleaned = -0.00293964 Jy ! Component: 3400 - total flux cleaned = -0.00299027 Jy ! Component: 3450 - total flux cleaned = -0.00305733 Jy ! Component: 3500 - total flux cleaned = -0.00309065 Jy ! Component: 3550 - total flux cleaned = -0.00317341 Jy ! Component: 3600 - total flux cleaned = -0.00325571 Jy ! Component: 3650 - total flux cleaned = -0.00328865 Jy ! Component: 3700 - total flux cleaned = -0.00341857 Jy ! Component: 3750 - total flux cleaned = -0.00348314 Jy ! Component: 3800 - total flux cleaned = -0.00353129 Jy ! Component: 3850 - total flux cleaned = -0.00362699 Jy ! Component: 3900 - total flux cleaned = -0.00369036 Jy ! Component: 3950 - total flux cleaned = -0.00376924 Jy ! Component: 4000 - total flux cleaned = -0.0038006 Jy ! Component: 4050 - total flux cleaned = -0.00386307 Jy ! Total flux subtracted in 4096 components = -0.00389413 Jy ! Clean residual min=-0.000920 max=0.000780 Jy/beam ! Clean residual mean=-0.000006 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.0897086 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 380 components and 0.0897086 Jy ![Exited script file: muppet] wmap "J1155-2949_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 17.6 at -20.54 degrees (North through East) ! Clean map min=-0.0032929 max=0.067936 Jy/beam ! Writing clean map to FITS file: J1155-2949_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0679362 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301113 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.32969 1.32969 2.65937 5.31874 10.6375 21.275 42.5499 85.0999 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.378 x 17.6 at -20.54 degrees (North through East) ! Clean map min=-0.0032929 max=0.067936 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1155-2949_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:11:48 2019