! Started logfile: J1155-2949_S_2017_02_19_pus_uvs.log on Sat May 4 18:50:48 2019 obs J1155-2949_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1155-2949_S_2017_02_19_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.605172 visibilities/baseline/integration-bin. ! Found source: J1155-2949 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 12636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1155-2949_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 657 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984852Jy sigma=0.006085 ! Fit after self-cal, rms=0.937479Jy sigma=0.005826 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=12.15 mas, bpa=19.24 degrees ! Estimated noise=1554.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0532941 Jy ! Component: 100 - total flux cleaned = 0.0655488 Jy ! Total flux subtracted in 100 components = 0.0655488 Jy ! Clean residual min=-0.005485 max=0.006898 Jy/beam ! Clean residual mean=-0.000011 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.0655488 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0655488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115626Jy sigma=0.000653 ! Fit after self-cal, rms=0.114450Jy sigma=0.000647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=13.91 mas, bpa=18.2 degrees ! Estimated noise=1153.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00582715 Jy ! Component: 100 - total flux cleaned = 0.00830655 Jy ! Component: 150 - total flux cleaned = 0.00862154 Jy ! Component: 200 - total flux cleaned = 0.00877721 Jy ! Total flux subtracted in 200 components = 0.00877721 Jy ! Clean residual min=-0.004886 max=0.008719 Jy/beam ! Clean residual mean=-0.000023 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.074326 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.074326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114112Jy sigma=0.000646 ! Fit after self-cal, rms=0.114112Jy sigma=0.000645 ! Inverting map ! Added new window around map position (12.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00804633 Jy ! Component: 100 - total flux cleaned = 0.0122235 Jy ! Component: 150 - total flux cleaned = 0.0148094 Jy ! Component: 200 - total flux cleaned = 0.0163152 Jy ! Total flux subtracted in 200 components = 0.0163152 Jy ! Clean residual min=-0.003421 max=0.004594 Jy/beam ! Clean residual mean=-0.000010 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 0.0906412 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 70 components and 0.0906412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113541Jy sigma=0.000641 ! Fit after self-cal, rms=0.113393Jy sigma=0.000640 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00535252 Jy ! Component: 100 - total flux cleaned = 0.0082521 Jy ! Component: 150 - total flux cleaned = 0.0101154 Jy ! Component: 200 - total flux cleaned = 0.0107145 Jy ! Total flux subtracted in 200 components = 0.0107145 Jy ! Clean residual min=-0.003236 max=0.003909 Jy/beam ! Clean residual mean=-0.000009 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.101356 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 89 components and 0.101356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113106Jy sigma=0.000638 ! Fit after self-cal, rms=0.113036Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.10 KP 1.02 ! LA 1.03 MK 1.00* NL 0.89 OV 1.02 ! PT 1.00* SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.03 KP 1.05 ! LA 1.03 MK 1.00* NL 1.00 OV 1.12 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.03 HN 1.03 KP 0.95 ! LA 0.84 MK 1.00* NL 1.12 OV 0.92 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.12 HN 0.82 KP 1.00* ! LA 0.85 MK 1.00* NL 1.00* OV 0.92 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.113036Jy sigma=0.000637 ! Fit after self-cal, rms=0.109182Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=13.98 mas, bpa=18.04 degrees ! Estimated noise=1142.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247247 Jy ! Component: 100 - total flux cleaned = 0.00316396 Jy ! Component: 150 - total flux cleaned = 0.00316966 Jy ! Component: 200 - total flux cleaned = 0.0032249 Jy ! Total flux subtracted in 200 components = 0.0032249 Jy ! Clean residual min=-0.002802 max=0.003135 Jy/beam ! Clean residual mean=-0.000005 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.104581 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 119 components and 0.104581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109063Jy sigma=0.000635 ! Fit after self-cal, rms=0.108881Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108881Jy sigma=0.000634 ! Fit after self-cal, rms=0.109037Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=13.9 mas, bpa=18.1 degrees ! Estimated noise=1141.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183986 Jy ! Component: 100 - total flux cleaned = 0.00236108 Jy ! Component: 150 - total flux cleaned = 0.00273556 Jy ! Component: 200 - total flux cleaned = 0.00278114 Jy ! Total flux subtracted in 200 components = 0.00278114 Jy ! Clean residual min=-0.002627 max=0.002651 Jy/beam ! Clean residual mean=-0.000005 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.107362 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 136 components and 0.107362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108951Jy sigma=0.000633 ! Fit after self-cal, rms=0.108927Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162077 Jy ! Component: 100 - total flux cleaned = 0.00227002 Jy ! Component: 150 - total flux cleaned = 0.00252026 Jy ! Component: 200 - total flux cleaned = 0.0026106 Jy ! Total flux subtracted in 200 components = 0.0026106 Jy ! Clean residual min=-0.002422 max=0.002477 Jy/beam ! Clean residual mean=-0.000004 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.109972 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 152 components and 0.109972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108859Jy sigma=0.000632 ! Fit after self-cal, rms=0.108809Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108809Jy sigma=0.000631 ! Fit after self-cal, rms=0.109551Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=13.82 mas, bpa=18.15 degrees ! Estimated noise=1140.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114787 Jy ! Component: 100 - total flux cleaned = 0.00142757 Jy ! Component: 150 - total flux cleaned = 0.00184393 Jy ! Component: 200 - total flux cleaned = 0.00192368 Jy ! Total flux subtracted in 200 components = 0.00192368 Jy ! Clean residual min=-0.002505 max=0.002220 Jy/beam ! Clean residual mean=-0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.111896 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 158 components and 0.111896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109490Jy sigma=0.000631 ! Fit after self-cal, rms=0.109456Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113806 Jy ! Component: 100 - total flux cleaned = 0.00144702 Jy ! Component: 150 - total flux cleaned = 0.00158081 Jy ! Component: 200 - total flux cleaned = 0.00162202 Jy ! Total flux subtracted in 200 components = 0.00162202 Jy ! Clean residual min=-0.002444 max=0.002184 Jy/beam ! Clean residual mean=-0.000002 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.113518 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 168 components and 0.113518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109403Jy sigma=0.000630 ! Fit after self-cal, rms=0.109379Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109379Jy sigma=0.000630 ! Fit after self-cal, rms=0.110088Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.466 mas, bmaj=21.29 mas, bpa=10.35 degrees ! Estimated noise=1322.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649012 Jy ! Component: 100 - total flux cleaned = 0.000725514 Jy ! Component: 150 - total flux cleaned = 0.00074439 Jy ! Component: 200 - total flux cleaned = 0.000759419 Jy ! Total flux subtracted in 200 components = 0.000759419 Jy ! Clean residual min=-0.002271 max=0.002063 Jy/beam ! Clean residual mean=-0.000004 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.114277 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 183 components and 0.114277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110070Jy sigma=0.000630 ! Fit after self-cal, rms=0.110105Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337161 Jy ! Component: 100 - total flux cleaned = 0.000375262 Jy ! Component: 150 - total flux cleaned = 0.000439848 Jy ! Component: 200 - total flux cleaned = 0.000454776 Jy ! Total flux subtracted in 200 components = 0.000454776 Jy ! Clean residual min=-0.002264 max=0.002007 Jy/beam ! Clean residual mean=-0.000004 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.114732 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 188 components and 0.114732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110095Jy sigma=0.000630 ! Fit after self-cal, rms=0.110099Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=13.78 mas, bpa=18.2 degrees ! Estimated noise=1141.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.759 x 13.78 at 18.2 degrees (North through East) ! Clean map min=-0.004528 max=0.068516 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=12 mas, bpa=19.31 degrees ! Estimated noise=1530.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506334 Jy ! Component: 100 - total flux cleaned = 0.0703967 Jy ! Component: 150 - total flux cleaned = 0.0827052 Jy ! Component: 200 - total flux cleaned = 0.0912887 Jy ! Total flux subtracted in 200 components = 0.0912887 Jy ! Clean residual min=-0.006330 max=0.006270 Jy/beam ! Clean residual mean=-0.000006 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.0912887 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0912887 Jy ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=13.78 mas, bpa=18.2 degrees ! Estimated noise=1141.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756132 Jy ! Component: 100 - total flux cleaned = 0.0116116 Jy ! Component: 150 - total flux cleaned = 0.0143326 Jy ! Component: 200 - total flux cleaned = 0.0166101 Jy ! Total flux subtracted in 200 components = 0.0166101 Jy ! Clean residual min=-0.003791 max=0.003152 Jy/beam ! Clean residual mean=-0.000006 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.107899 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 60 components and 0.107899 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.466 mas, bmaj=21.29 mas, bpa=10.35 degrees ! Estimated noise=1322.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349423 Jy ! Component: 100 - total flux cleaned = 0.00552587 Jy ! Component: 150 - total flux cleaned = 0.0069256 Jy ! Component: 200 - total flux cleaned = 0.00724049 Jy ! Total flux subtracted in 200 components = 0.00724049 Jy ! Clean residual min=-0.002291 max=0.002250 Jy/beam ! Clean residual mean=-0.000005 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.115139 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.78743e-05 Jy ! Component: 100 - total flux cleaned = 3.77203e-05 Jy ! Component: 150 - total flux cleaned = 7.3116e-05 Jy ! Component: 200 - total flux cleaned = 0.000104854 Jy ! Total flux subtracted in 200 components = 0.000104854 Jy ! Clean residual min=-0.002277 max=0.002187 Jy/beam ! Clean residual mean=-0.000005 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.115244 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 101 components and 0.115244 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=13.78 mas, bpa=18.2 degrees ! Estimated noise=1141.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00086263 Jy ! Component: 100 - total flux cleaned = -0.00103407 Jy ! Component: 150 - total flux cleaned = -0.00088022 Jy ! Component: 200 - total flux cleaned = -0.000680076 Jy ! Total flux subtracted in 200 components = -0.000680076 Jy ! Clean residual min=-0.002970 max=0.002330 Jy/beam ! Clean residual mean=-0.000002 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.114564 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 123 components and 0.114564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110149Jy sigma=0.000630 ! Fit after self-cal, rms=0.110141Jy sigma=0.000630 wmodel J1155-2949_S_2017_02_19_pus_map.mod ! Writing 123 model components to file: J1155-2949_S_2017_02_19_pus_map.mod wobs J1155-2949_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1155-2949_S_2017_02_19_pus_uvs.fits wwins J1155-2949_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1155-2949_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102444 Jy ! Component: 100 - total flux cleaned = -0.00131202 Jy ! Component: 150 - total flux cleaned = -0.00142736 Jy ! Component: 200 - total flux cleaned = -0.00164665 Jy ! Component: 250 - total flux cleaned = -0.0019266 Jy ! Component: 300 - total flux cleaned = -0.00209518 Jy ! Component: 350 - total flux cleaned = -0.00235771 Jy ! Component: 400 - total flux cleaned = -0.00254865 Jy ! Component: 450 - total flux cleaned = -0.00279655 Jy ! Component: 500 - total flux cleaned = -0.00306738 Jy ! Component: 550 - total flux cleaned = -0.00333142 Jy ! Component: 600 - total flux cleaned = -0.00358849 Jy ! Component: 650 - total flux cleaned = -0.003784 Jy ! Component: 700 - total flux cleaned = -0.00405546 Jy ! Component: 750 - total flux cleaned = -0.00413563 Jy ! Component: 800 - total flux cleaned = -0.00426615 Jy ! Component: 850 - total flux cleaned = -0.00441884 Jy ! Component: 900 - total flux cleaned = -0.00451834 Jy ! Component: 950 - total flux cleaned = -0.00468812 Jy ! Component: 1000 - total flux cleaned = -0.0047831 Jy ! Component: 1050 - total flux cleaned = -0.00492313 Jy ! Component: 1100 - total flux cleaned = -0.005038 Jy ! Component: 1150 - total flux cleaned = -0.00508315 Jy ! Component: 1200 - total flux cleaned = -0.00512791 Jy ! Component: 1250 - total flux cleaned = -0.00530284 Jy ! Component: 1300 - total flux cleaned = -0.00543165 Jy ! Component: 1350 - total flux cleaned = -0.00547382 Jy ! Component: 1400 - total flux cleaned = -0.00551571 Jy ! Component: 1450 - total flux cleaned = -0.00559819 Jy ! Component: 1500 - total flux cleaned = -0.00563856 Jy ! Component: 1550 - total flux cleaned = -0.00575845 Jy ! Component: 1600 - total flux cleaned = -0.00583719 Jy ! Component: 1650 - total flux cleaned = -0.00597363 Jy ! Component: 1700 - total flux cleaned = -0.00605035 Jy ! Component: 1750 - total flux cleaned = -0.00608851 Jy ! Component: 1800 - total flux cleaned = -0.00622026 Jy ! Component: 1850 - total flux cleaned = -0.00625744 Jy ! Component: 1900 - total flux cleaned = -0.00633086 Jy ! Component: 1950 - total flux cleaned = -0.00634905 Jy ! Component: 2000 - total flux cleaned = -0.00643891 Jy ! Component: 2050 - total flux cleaned = -0.00642113 Jy ! Component: 2100 - total flux cleaned = -0.0064035 Jy ! Component: 2150 - total flux cleaned = -0.00643841 Jy ! Component: 2200 - total flux cleaned = -0.00645559 Jy ! Component: 2250 - total flux cleaned = -0.00649007 Jy ! Component: 2300 - total flux cleaned = -0.00649006 Jy ! Component: 2350 - total flux cleaned = -0.00652353 Jy ! Component: 2400 - total flux cleaned = -0.00652368 Jy ! Component: 2450 - total flux cleaned = -0.00654032 Jy ! Component: 2500 - total flux cleaned = -0.00657324 Jy ! Component: 2550 - total flux cleaned = -0.00665425 Jy ! Component: 2600 - total flux cleaned = -0.00665408 Jy ! Component: 2650 - total flux cleaned = -0.00666991 Jy ! Component: 2700 - total flux cleaned = -0.00670134 Jy ! Component: 2750 - total flux cleaned = -0.00676358 Jy ! Component: 2800 - total flux cleaned = -0.00674795 Jy ! Component: 2850 - total flux cleaned = -0.00676344 Jy ! Component: 2900 - total flux cleaned = -0.00676353 Jy ! Component: 2950 - total flux cleaned = -0.00680882 Jy ! Component: 3000 - total flux cleaned = -0.00682363 Jy ! Component: 3050 - total flux cleaned = -0.00682369 Jy ! Component: 3100 - total flux cleaned = -0.00677936 Jy ! Component: 3150 - total flux cleaned = -0.0068232 Jy ! Component: 3200 - total flux cleaned = -0.00676502 Jy ! Component: 3250 - total flux cleaned = -0.00675046 Jy ! Component: 3300 - total flux cleaned = -0.00679354 Jy ! Component: 3350 - total flux cleaned = -0.00682183 Jy ! Component: 3400 - total flux cleaned = -0.00677951 Jy ! Component: 3450 - total flux cleaned = -0.00679349 Jy ! Component: 3500 - total flux cleaned = -0.00673786 Jy ! Component: 3550 - total flux cleaned = -0.00672409 Jy ! Component: 3600 - total flux cleaned = -0.00669674 Jy ! Component: 3650 - total flux cleaned = -0.00673775 Jy ! Component: 3700 - total flux cleaned = -0.00666985 Jy ! Component: 3750 - total flux cleaned = -0.00664301 Jy ! Component: 3800 - total flux cleaned = -0.00657618 Jy ! Component: 3850 - total flux cleaned = -0.00654958 Jy ! Component: 3900 - total flux cleaned = -0.00653634 Jy ! Component: 3950 - total flux cleaned = -0.00641802 Jy ! Component: 4000 - total flux cleaned = -0.00637876 Jy ! Component: 4050 - total flux cleaned = -0.00632684 Jy ! Total flux subtracted in 4096 components = -0.00622358 Jy ! Clean residual min=-0.000738 max=0.000767 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.108341 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 378 components and 0.108341 Jy ![Exited script file: muppet] wmap "J1155-2949_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.759 x 13.78 at 18.2 degrees (North through East) ! Clean map min=-0.0033461 max=0.066961 Jy/beam ! Writing clean map to FITS file: J1155-2949_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0669613 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07693 1.07693 2.15387 4.30774 8.61547 17.2309 34.4619 68.9238 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.759 x 13.78 at 18.2 degrees (North through East) ! Clean map min=-0.0033461 max=0.066961 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1155-2949_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:50:53 2019