! Started logfile: J1154-3505_S_2017_01_21_pus_uvs.log on Sun May 5 15:54:15 2019 obs J1154-3505_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1154-3505_S_2017_01_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.671014 visibilities/baseline/integration-bin. ! Found source: J1154-3505 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11112 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1154-3505_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 454 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.763841Jy sigma=0.003777 ! Fit after self-cal, rms=0.697681Jy sigma=0.003408 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.097 mas, bmaj=6.244 mas, bpa=-3.542 degrees ! Estimated noise=2428.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.444097 Jy ! Component: 100 - total flux cleaned = 0.64599 Jy ! Total flux subtracted in 100 components = 0.64599 Jy ! Clean residual min=-0.071289 max=0.123039 Jy/beam ! Clean residual mean=-0.001179 rms=0.027518 Jy/beam ! Combined flux in latest and established models = 0.64599 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.64599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605918Jy sigma=0.002972 ! Fit after self-cal, rms=0.605770Jy sigma=0.002970 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=6.987 mas, bpa=-4.458 degrees ! Estimated noise=1480.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260265 Jy ! Component: 100 - total flux cleaned = 0.404328 Jy ! Component: 150 - total flux cleaned = 0.48501 Jy ! Component: 200 - total flux cleaned = 0.530212 Jy ! Total flux subtracted in 200 components = 0.530212 Jy ! Clean residual min=-0.114997 max=0.182762 Jy/beam ! Clean residual mean=0.001314 rms=0.043708 Jy/beam ! Combined flux in latest and established models = 1.1762 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 52 components and 1.1762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.490103Jy sigma=0.002260 ! Fit after self-cal, rms=0.489754Jy sigma=0.002257 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 1.00* HN 1.78 LA 1.08 ! MK 1.02 NL 1.30 OV 0.86 PT 1.00 ! SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 1.96 LA 1.09 ! MK 1.05 NL 1.31 OV 0.91 PT 0.92 ! SC 1.18 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 1.92 LA 1.10 ! MK 1.05 NL 1.31 OV 0.83 PT 0.88 ! SC 1.19 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 2.04 LA 1.06 ! MK 1.11 NL 1.00* OV 0.86 PT 0.90 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.489754Jy sigma=0.002257 ! Fit after self-cal, rms=0.392561Jy sigma=0.001995 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=7.127 mas, bpa=-4.487 degrees ! Estimated noise=1539.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00354559 Jy ! Component: 100 - total flux cleaned = -0.00570699 Jy ! Component: 150 - total flux cleaned = -0.00744161 Jy ! Component: 200 - total flux cleaned = -0.00886878 Jy ! Total flux subtracted in 200 components = -0.00886878 Jy ! Clean residual min=-0.101375 max=0.170737 Jy/beam ! Clean residual mean=0.000761 rms=0.039851 Jy/beam ! Combined flux in latest and established models = 1.16733 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 1.16733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391484Jy sigma=0.001989 ! Fit after self-cal, rms=0.392886Jy sigma=0.001986 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.392886Jy sigma=0.001986 ! Fit after self-cal, rms=0.452861Jy sigma=0.001763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=7.167 mas, bpa=-4.593 degrees ! Estimated noise=1671.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436135 Jy ! Component: 100 - total flux cleaned = 0.0508929 Jy ! Component: 150 - total flux cleaned = 0.0504957 Jy ! Component: 200 - total flux cleaned = 0.0504896 Jy ! Total flux subtracted in 200 components = 0.0504896 Jy ! Clean residual min=-0.083244 max=0.160630 Jy/beam ! Clean residual mean=-0.000413 rms=0.036795 Jy/beam ! Combined flux in latest and established models = 1.21782 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 1.21782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.447526Jy sigma=0.001740 ! Fit after self-cal, rms=0.446634Jy sigma=0.001738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27.5, 100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159285 Jy ! Component: 100 - total flux cleaned = 0.236353 Jy ! Component: 150 - total flux cleaned = 0.280893 Jy ! Component: 200 - total flux cleaned = 0.312473 Jy ! Total flux subtracted in 200 components = 0.312473 Jy ! Clean residual min=-0.083755 max=0.116873 Jy/beam ! Clean residual mean=0.000673 rms=0.025850 Jy/beam ! Combined flux in latest and established models = 1.5303 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 103 components and 1.5303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384196Jy sigma=0.001384 ! Fit after self-cal, rms=0.377529Jy sigma=0.001364 ! Inverting map ! Added new window around map position (-89.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121635 Jy ! Component: 100 - total flux cleaned = 0.183863 Jy ! Component: 150 - total flux cleaned = 0.215422 Jy ! Component: 200 - total flux cleaned = 0.231822 Jy ! Total flux subtracted in 200 components = 0.231822 Jy ! Clean residual min=-0.060250 max=0.059254 Jy/beam ! Clean residual mean=-0.000801 rms=0.017248 Jy/beam ! Combined flux in latest and established models = 1.76212 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 175 components and 1.76212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335024Jy sigma=0.001086 ! Fit after self-cal, rms=0.330741Jy sigma=0.001058 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330741Jy sigma=0.001058 ! Fit after self-cal, rms=0.286884Jy sigma=0.000905 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=7.282 mas, bpa=-4.29 degrees ! Estimated noise=1636.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433577 Jy ! Component: 100 - total flux cleaned = 0.069776 Jy ! Component: 150 - total flux cleaned = 0.0807188 Jy ! Component: 200 - total flux cleaned = 0.0840583 Jy ! Total flux subtracted in 200 components = 0.0840583 Jy ! Clean residual min=-0.032025 max=0.041632 Jy/beam ! Clean residual mean=-0.000209 rms=0.010346 Jy/beam ! Combined flux in latest and established models = 1.84618 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 216 components and 1.84618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276529Jy sigma=0.000849 ! Fit after self-cal, rms=0.276535Jy sigma=0.000844 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399357 Jy ! Component: 100 - total flux cleaned = 0.0489933 Jy ! Component: 150 - total flux cleaned = 0.0496002 Jy ! Component: 200 - total flux cleaned = 0.0501798 Jy ! Total flux subtracted in 200 components = 0.0501798 Jy ! Clean residual min=-0.035290 max=0.028981 Jy/beam ! Clean residual mean=-0.000138 rms=0.008805 Jy/beam ! Combined flux in latest and established models = 1.89636 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 243 components and 1.89636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268507Jy sigma=0.000805 ! Fit after self-cal, rms=0.267952Jy sigma=0.000798 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267952Jy sigma=0.000798 ! Fit after self-cal, rms=0.265933Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.09 mas, bmaj=23.13 mas, bpa=-1.167 degrees ! Estimated noise=1926.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274127 Jy ! Component: 100 - total flux cleaned = 0.0307606 Jy ! Component: 150 - total flux cleaned = 0.0318702 Jy ! Component: 200 - total flux cleaned = 0.0333591 Jy ! Total flux subtracted in 200 components = 0.0333591 Jy ! Clean residual min=-0.043379 max=0.041688 Jy/beam ! Clean residual mean=0.000019 rms=0.012120 Jy/beam ! Combined flux in latest and established models = 1.92971 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 258 components and 1.92971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263252Jy sigma=0.000782 ! Fit after self-cal, rms=0.263231Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444248 Jy ! Component: 100 - total flux cleaned = 0.00535581 Jy ! Component: 150 - total flux cleaned = 0.00662113 Jy ! Component: 200 - total flux cleaned = 0.0078186 Jy ! Total flux subtracted in 200 components = 0.0078186 Jy ! Clean residual min=-0.041831 max=0.040139 Jy/beam ! Clean residual mean=-0.000014 rms=0.011715 Jy/beam ! Combined flux in latest and established models = 1.93753 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 269 components and 1.93753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262438Jy sigma=0.000783 ! Fit after self-cal, rms=0.262541Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=7.331 mas, bpa=-4.433 degrees ! Estimated noise=1639.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.933 x 7.331 at -4.433 degrees (North through East) ! Clean map min=-0.028037 max=0.70793 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262541Jy sigma=0.000783 ! Fit after self-cal, rms=0.258307Jy sigma=0.000707 ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=7.377 mas, bpa=-4.735 degrees ! Estimated noise=1653.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00441206 Jy ! Component: 100 - total flux cleaned = -0.00441226 Jy ! Component: 150 - total flux cleaned = -0.00394412 Jy ! Component: 200 - total flux cleaned = -0.00315799 Jy ! Total flux subtracted in 200 components = -0.00315799 Jy ! Clean residual min=-0.029056 max=0.024681 Jy/beam ! Clean residual mean=0.000025 rms=0.007094 Jy/beam ! Combined flux in latest and established models = 1.93438 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 286 components and 1.93438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255152Jy sigma=0.000696 ! Fit after self-cal, rms=0.255132Jy sigma=0.000695 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834477 Jy ! Component: 100 - total flux cleaned = 0.000159819 Jy ! Component: 150 - total flux cleaned = 0.000172571 Jy ! Component: 200 - total flux cleaned = 0.000482013 Jy ! Total flux subtracted in 200 components = 0.000482013 Jy ! Clean residual min=-0.028270 max=0.024729 Jy/beam ! Clean residual mean=-0.000001 rms=0.007014 Jy/beam ! Combined flux in latest and established models = 1.93486 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 300 components and 1.93486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253914Jy sigma=0.000692 ! Fit after self-cal, rms=0.253912Jy sigma=0.000692 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253912Jy sigma=0.000692 ! Fit after self-cal, rms=0.253307Jy sigma=0.000691 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.267 mas, bmaj=6.314 mas, bpa=-3.384 degrees ! Estimated noise=3004.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.534446 Jy ! Component: 100 - total flux cleaned = 0.748614 Jy ! Component: 150 - total flux cleaned = 0.883176 Jy ! Component: 200 - total flux cleaned = 0.992253 Jy ! Total flux subtracted in 200 components = 0.992253 Jy ! Clean residual min=-0.063312 max=0.077620 Jy/beam ! Clean residual mean=-0.001273 rms=0.021898 Jy/beam ! Combined flux in latest and established models = 0.992253 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 63 model components to the UV plane model. ! The established model now contains 63 components and 0.992253 Jy ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.38 mas, bpa=-4.661 degrees ! Estimated noise=1653.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.171132 Jy ! Component: 100 - total flux cleaned = 0.302575 Jy ! Component: 150 - total flux cleaned = 0.406644 Jy ! Component: 200 - total flux cleaned = 0.490527 Jy ! Total flux subtracted in 200 components = 0.490527 Jy ! Clean residual min=-0.056199 max=0.065735 Jy/beam ! Clean residual mean=-0.000636 rms=0.021048 Jy/beam ! Combined flux in latest and established models = 1.48278 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 141 components and 1.48278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.124 mas, bmaj=23.32 mas, bpa=-1.172 degrees ! Estimated noise=1922.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129783 Jy ! Component: 100 - total flux cleaned = 0.218634 Jy ! Component: 150 - total flux cleaned = 0.282147 Jy ! Component: 200 - total flux cleaned = 0.328295 Jy ! Total flux subtracted in 200 components = 0.328295 Jy ! Clean residual min=-0.049894 max=0.052386 Jy/beam ! Clean residual mean=-0.000196 rms=0.016253 Jy/beam ! Combined flux in latest and established models = 1.81107 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336854 Jy ! Component: 100 - total flux cleaned = 0.0583124 Jy ! Component: 150 - total flux cleaned = 0.0683904 Jy ! Component: 200 - total flux cleaned = 0.0745052 Jy ! Total flux subtracted in 200 components = 0.0745052 Jy ! Clean residual min=-0.045029 max=0.046046 Jy/beam ! Clean residual mean=-0.000086 rms=0.013146 Jy/beam ! Combined flux in latest and established models = 1.88558 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 195 components and 1.88558 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.38 mas, bpa=-4.661 degrees ! Estimated noise=1653.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282967 Jy ! Component: 100 - total flux cleaned = 0.00429507 Jy ! Component: 150 - total flux cleaned = 0.00498497 Jy ! Component: 200 - total flux cleaned = 0.00625724 Jy ! Total flux subtracted in 200 components = 0.00625724 Jy ! Clean residual min=-0.032171 max=0.030527 Jy/beam ! Clean residual mean=-0.000049 rms=0.008255 Jy/beam ! Combined flux in latest and established models = 1.89184 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 218 components and 1.89184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262305Jy sigma=0.000737 ! Fit after self-cal, rms=0.262213Jy sigma=0.000729 wmodel J1154-3505_S_2017_01_21_pus_map.mod ! Writing 218 model components to file: J1154-3505_S_2017_01_21_pus_map.mod wobs J1154-3505_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1154-3505_S_2017_01_21_pus_uvs.fits wwins J1154-3505_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1154-3505_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109972 Jy ! Component: 100 - total flux cleaned = 0.00556606 Jy ! Component: 150 - total flux cleaned = 0.0088311 Jy ! Component: 200 - total flux cleaned = 0.0110242 Jy ! Component: 250 - total flux cleaned = 0.013916 Jy ! Component: 300 - total flux cleaned = 0.0158857 Jy ! Component: 350 - total flux cleaned = 0.0185453 Jy ! Component: 400 - total flux cleaned = 0.0214546 Jy ! Component: 450 - total flux cleaned = 0.0235702 Jy ! Component: 500 - total flux cleaned = 0.0252726 Jy ! Component: 550 - total flux cleaned = 0.0262594 Jy ! Component: 600 - total flux cleaned = 0.026573 Jy ! Component: 650 - total flux cleaned = 0.0271928 Jy ! Component: 700 - total flux cleaned = 0.0286812 Jy ! Component: 750 - total flux cleaned = 0.0281003 Jy ! Component: 800 - total flux cleaned = 0.0286631 Jy ! Component: 850 - total flux cleaned = 0.0275579 Jy ! Component: 900 - total flux cleaned = 0.0272911 Jy ! Component: 950 - total flux cleaned = 0.0272911 Jy ! Component: 1000 - total flux cleaned = 0.0267831 Jy ! Component: 1050 - total flux cleaned = 0.0270369 Jy ! Component: 1100 - total flux cleaned = 0.0272871 Jy ! Component: 1150 - total flux cleaned = 0.0268125 Jy ! Component: 1200 - total flux cleaned = 0.0277526 Jy ! Component: 1250 - total flux cleaned = 0.0266006 Jy ! Component: 1300 - total flux cleaned = 0.0263675 Jy ! Component: 1350 - total flux cleaned = 0.0252651 Jy ! Component: 1400 - total flux cleaned = 0.0250539 Jy ! Component: 1450 - total flux cleaned = 0.0246316 Jy ! Component: 1500 - total flux cleaned = 0.0242116 Jy ! Component: 1550 - total flux cleaned = 0.0234012 Jy ! Component: 1600 - total flux cleaned = 0.0232031 Jy ! Component: 1650 - total flux cleaned = 0.0224221 Jy ! Component: 1700 - total flux cleaned = 0.0220429 Jy ! Component: 1750 - total flux cleaned = 0.0211067 Jy ! Component: 1800 - total flux cleaned = 0.0209237 Jy ! Component: 1850 - total flux cleaned = 0.0202017 Jy ! Component: 1900 - total flux cleaned = 0.0196744 Jy ! Component: 1950 - total flux cleaned = 0.0193262 Jy ! Component: 2000 - total flux cleaned = 0.0186439 Jy ! Component: 2050 - total flux cleaned = 0.0178043 Jy ! Component: 2100 - total flux cleaned = 0.0169777 Jy ! Component: 2150 - total flux cleaned = 0.0168161 Jy ! Component: 2200 - total flux cleaned = 0.0161755 Jy ! Component: 2250 - total flux cleaned = 0.0152292 Jy ! Component: 2300 - total flux cleaned = 0.0143021 Jy ! Component: 2350 - total flux cleaned = 0.0139984 Jy ! Component: 2400 - total flux cleaned = 0.0129495 Jy ! Component: 2450 - total flux cleaned = 0.0126539 Jy ! Component: 2500 - total flux cleaned = 0.0119274 Jy ! Component: 2550 - total flux cleaned = 0.0112154 Jy ! Component: 2600 - total flux cleaned = 0.011218 Jy ! Component: 2650 - total flux cleaned = 0.0112182 Jy ! Component: 2700 - total flux cleaned = 0.0108066 Jy ! Component: 2750 - total flux cleaned = 0.0101322 Jy ! Component: 2800 - total flux cleaned = 0.0100024 Jy ! Component: 2850 - total flux cleaned = 0.00987234 Jy ! Component: 2900 - total flux cleaned = 0.00935546 Jy ! Component: 2950 - total flux cleaned = 0.00935626 Jy ! Component: 3000 - total flux cleaned = 0.00935613 Jy ! Component: 3050 - total flux cleaned = 0.00960423 Jy ! Component: 3100 - total flux cleaned = 0.00923374 Jy ! Component: 3150 - total flux cleaned = 0.00911345 Jy ! Component: 3200 - total flux cleaned = 0.00899456 Jy ! Component: 3250 - total flux cleaned = 0.00899495 Jy ! Component: 3300 - total flux cleaned = 0.00817402 Jy ! Component: 3350 - total flux cleaned = 0.00817432 Jy ! Component: 3400 - total flux cleaned = 0.00737157 Jy ! Component: 3450 - total flux cleaned = 0.00691839 Jy ! Component: 3500 - total flux cleaned = 0.00646897 Jy ! Component: 3550 - total flux cleaned = 0.00591375 Jy ! Component: 3600 - total flux cleaned = 0.00525542 Jy ! Component: 3650 - total flux cleaned = 0.0049289 Jy ! Component: 3700 - total flux cleaned = 0.00460496 Jy ! Component: 3750 - total flux cleaned = 0.00385538 Jy ! Component: 3800 - total flux cleaned = 0.00364281 Jy ! Component: 3850 - total flux cleaned = 0.00311515 Jy ! Component: 3900 - total flux cleaned = 0.00248809 Jy ! Component: 3950 - total flux cleaned = 0.0021772 Jy ! Component: 4000 - total flux cleaned = 0.00176655 Jy ! Component: 4050 - total flux cleaned = 0.0012562 Jy ! Total flux subtracted in 4096 components = 0.000750998 Jy ! Clean residual min=-0.006427 max=0.006512 Jy/beam ! Clean residual mean=0.000036 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 1.89259 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 545 components and 1.89259 Jy ![Exited script file: muppet] wmap "J1154-3505_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 7.38 at -4.661 degrees (North through East) ! Clean map min=-0.018264 max=0.76889 Jy/beam ! Writing clean map to FITS file: J1154-3505_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.768888 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00180084 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.70264 0.70264 1.40528 2.81056 5.62112 11.2422 22.4845 44.9689 89.9379 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0054 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.768 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 7.38 at -4.661 degrees (North through East) ! Clean map min=-0.018264 max=0.76889 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1154-3505_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:54:20 2019