! Started logfile: J1154-3242_S_2017_01_21_pus_uvs.log on Sun May 5 15:54:11 2019 obs J1154-3242_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1154-3242_S_2017_01_21_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.652778 visibilities/baseline/integration-bin. ! Found source: J1154-3242 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 7144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1154-3242_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929987Jy sigma=0.005073 ! Fit after self-cal, rms=0.893651Jy sigma=0.004907 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.292 mas, bmaj=6.114 mas, bpa=-4.231 degrees ! Estimated noise=2420.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0844669 Jy ! Component: 100 - total flux cleaned = 0.108038 Jy ! Total flux subtracted in 100 components = 0.108038 Jy ! Clean residual min=-0.007550 max=0.010967 Jy/beam ! Clean residual mean=-0.000211 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.108038 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.108038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133184Jy sigma=0.000649 ! Fit after self-cal, rms=0.133111Jy sigma=0.000648 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.256 mas, bpa=-2.552 degrees ! Estimated noise=1692.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166135 Jy ! Component: 100 - total flux cleaned = 0.0246267 Jy ! Component: 150 - total flux cleaned = 0.028795 Jy ! Component: 200 - total flux cleaned = 0.0311114 Jy ! Total flux subtracted in 200 components = 0.0311114 Jy ! Clean residual min=-0.004995 max=0.005107 Jy/beam ! Clean residual mean=-0.000074 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.13915 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.13915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131256Jy sigma=0.000636 ! Fit after self-cal, rms=0.131193Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.04 LA 1.02 ! MK 0.97 NL 1.06 OV 1.04 PT 0.97 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.35 LA 0.96 ! MK 0.97 NL 0.97 OV 1.10 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.08 LA 0.97 ! MK 1.15 NL 1.01 OV 0.96 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.10 LA 0.89 ! MK 0.92 NL 1.00* OV 1.04 PT 0.95 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.131193Jy sigma=0.000635 ! Fit after self-cal, rms=0.133104Jy sigma=0.000633 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.802 mas, bmaj=7.245 mas, bpa=-2.383 degrees ! Estimated noise=1685.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369183 Jy ! Component: 100 - total flux cleaned = 0.000466245 Jy ! Component: 150 - total flux cleaned = 0.000554549 Jy ! Component: 200 - total flux cleaned = 0.00063436 Jy ! Total flux subtracted in 200 components = 0.00063436 Jy ! Clean residual min=-0.004412 max=0.004196 Jy/beam ! Clean residual mean=-0.000040 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.139784 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.139784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133074Jy sigma=0.000633 ! Fit after self-cal, rms=0.133221Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133221Jy sigma=0.000633 ! Fit after self-cal, rms=0.134494Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.799 mas, bmaj=7.254 mas, bpa=-2.133 degrees ! Estimated noise=1691.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734413 Jy ! Component: 100 - total flux cleaned = 0.000816582 Jy ! Component: 150 - total flux cleaned = 0.00089132 Jy ! Component: 200 - total flux cleaned = 0.000990656 Jy ! Total flux subtracted in 200 components = 0.000990656 Jy ! Clean residual min=-0.004196 max=0.003926 Jy/beam ! Clean residual mean=-0.000031 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.140775 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.140775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134470Jy sigma=0.000632 ! Fit after self-cal, rms=0.134495Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.10582e-05 Jy ! Component: 100 - total flux cleaned = 0.000143053 Jy ! Component: 150 - total flux cleaned = 0.000199237 Jy ! Component: 200 - total flux cleaned = 0.000250395 Jy ! Total flux subtracted in 200 components = 0.000250395 Jy ! Clean residual min=-0.004194 max=0.004006 Jy/beam ! Clean residual mean=-0.000030 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.141025 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.141025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134482Jy sigma=0.000632 ! Fit after self-cal, rms=0.134483Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134483Jy sigma=0.000632 ! Fit after self-cal, rms=0.135209Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=7.266 mas, bpa=-1.88 degrees ! Estimated noise=1687.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118576 Jy ! Component: 100 - total flux cleaned = 0.000178986 Jy ! Component: 150 - total flux cleaned = 0.000232982 Jy ! Component: 200 - total flux cleaned = 0.000281982 Jy ! Total flux subtracted in 200 components = 0.000281982 Jy ! Clean residual min=-0.003875 max=0.003913 Jy/beam ! Clean residual mean=-0.000020 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.141307 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.141307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135194Jy sigma=0.000631 ! Fit after self-cal, rms=0.135213Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54435e-05 Jy ! Component: 100 - total flux cleaned = 3.72986e-05 Jy ! Component: 150 - total flux cleaned = 5.7301e-05 Jy ! Component: 200 - total flux cleaned = 7.63303e-05 Jy ! Total flux subtracted in 200 components = 7.63303e-05 Jy ! Clean residual min=-0.003890 max=0.003895 Jy/beam ! Clean residual mean=-0.000019 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.141383 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.141383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135205Jy sigma=0.000631 ! Fit after self-cal, rms=0.135207Jy sigma=0.000631 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135207Jy sigma=0.000631 ! Fit after self-cal, rms=0.135221Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.312 mas, bmaj=20.17 mas, bpa=1.887 degrees ! Estimated noise=2271.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147848 Jy ! Component: 100 - total flux cleaned = -0.000150554 Jy ! Component: 150 - total flux cleaned = -0.000150503 Jy ! Component: 200 - total flux cleaned = -0.000149669 Jy ! Total flux subtracted in 200 components = -0.000149669 Jy ! Clean residual min=-0.004991 max=0.004691 Jy/beam ! Clean residual mean=-0.000050 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.141234 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 47 components and 0.141234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135225Jy sigma=0.000631 ! Fit after self-cal, rms=0.135229Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.93347e-05 Jy ! Component: 100 - total flux cleaned = -3.92783e-05 Jy ! Component: 150 - total flux cleaned = -3.85643e-05 Jy ! Component: 200 - total flux cleaned = -3.77187e-05 Jy ! Total flux subtracted in 200 components = -3.77187e-05 Jy ! Clean residual min=-0.005014 max=0.004687 Jy/beam ! Clean residual mean=-0.000051 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.141196 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 47 components and 0.141196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135234Jy sigma=0.000631 ! Fit after self-cal, rms=0.135231Jy sigma=0.000631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.269 mas, bpa=-1.7 degrees ! Estimated noise=1682.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.788 x 7.269 at -1.7 degrees (North through East) ! Clean map min=-0.0037454 max=0.11329 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.308 mas, bmaj=6.157 mas, bpa=-3.23 degrees ! Estimated noise=2398.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0823359 Jy ! Component: 100 - total flux cleaned = 0.107697 Jy ! Component: 150 - total flux cleaned = 0.121492 Jy ! Component: 200 - total flux cleaned = 0.129407 Jy ! Total flux subtracted in 200 components = 0.129407 Jy ! Clean residual min=-0.005441 max=0.006079 Jy/beam ! Clean residual mean=-0.000062 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.129407 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.129407 Jy ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.269 mas, bpa=-1.7 degrees ! Estimated noise=1682.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660788 Jy ! Component: 100 - total flux cleaned = 0.0101913 Jy ! Component: 150 - total flux cleaned = 0.0123168 Jy ! Component: 200 - total flux cleaned = 0.0129549 Jy ! Total flux subtracted in 200 components = 0.0129549 Jy ! Clean residual min=-0.003896 max=0.003663 Jy/beam ! Clean residual mean=-0.000014 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.142362 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 35 components and 0.142362 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.312 mas, bmaj=20.17 mas, bpa=1.887 degrees ! Estimated noise=2271.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216208 Jy ! Component: 100 - total flux cleaned = 0.000154521 Jy ! Component: 150 - total flux cleaned = 0.000103923 Jy ! Component: 200 - total flux cleaned = 8.32468e-05 Jy ! Total flux subtracted in 200 components = 8.32468e-05 Jy ! Clean residual min=-0.005076 max=0.004796 Jy/beam ! Clean residual mean=-0.000033 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.142445 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.86957e-05 Jy ! Component: 100 - total flux cleaned = -3.49923e-05 Jy ! Component: 150 - total flux cleaned = -4.98926e-05 Jy ! Component: 200 - total flux cleaned = -5.0338e-05 Jy ! Total flux subtracted in 200 components = -5.0338e-05 Jy ! Clean residual min=-0.005038 max=0.004781 Jy/beam ! Clean residual mean=-0.000033 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.142394 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.142394 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=7.269 mas, bpa=-1.7 degrees ! Estimated noise=1682.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507213 Jy ! Component: 100 - total flux cleaned = 0.000457223 Jy ! Component: 150 - total flux cleaned = 0.000457616 Jy ! Component: 200 - total flux cleaned = 0.000494072 Jy ! Total flux subtracted in 200 components = 0.000494072 Jy ! Clean residual min=-0.003820 max=0.003636 Jy/beam ! Clean residual mean=-0.000011 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.142889 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.142889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135197Jy sigma=0.000631 ! Fit after self-cal, rms=0.135186Jy sigma=0.000631 wmodel J1154-3242_S_2017_01_21_pus_map.mod ! Writing 64 model components to file: J1154-3242_S_2017_01_21_pus_map.mod wobs J1154-3242_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1154-3242_S_2017_01_21_pus_uvs.fits wwins J1154-3242_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1154-3242_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000565832 Jy ! Component: 100 - total flux cleaned = -0.0011482 Jy ! Component: 150 - total flux cleaned = -0.00157673 Jy ! Component: 200 - total flux cleaned = -0.00163485 Jy ! Component: 250 - total flux cleaned = -0.0015255 Jy ! Component: 300 - total flux cleaned = -0.00163165 Jy ! Component: 350 - total flux cleaned = -0.0016319 Jy ! Component: 400 - total flux cleaned = -0.0016342 Jy ! Component: 450 - total flux cleaned = -0.00168328 Jy ! Component: 500 - total flux cleaned = -0.00195917 Jy ! Component: 550 - total flux cleaned = -0.00209355 Jy ! Component: 600 - total flux cleaned = -0.00244267 Jy ! Component: 650 - total flux cleaned = -0.00265566 Jy ! Component: 700 - total flux cleaned = -0.002863 Jy ! Component: 750 - total flux cleaned = -0.00306572 Jy ! Component: 800 - total flux cleaned = -0.00318559 Jy ! Component: 850 - total flux cleaned = -0.00337957 Jy ! Component: 900 - total flux cleaned = -0.00349258 Jy ! Component: 950 - total flux cleaned = -0.00352882 Jy ! Component: 1000 - total flux cleaned = -0.00352907 Jy ! Component: 1050 - total flux cleaned = -0.00363567 Jy ! Component: 1100 - total flux cleaned = -0.0035656 Jy ! Component: 1150 - total flux cleaned = -0.00360009 Jy ! Component: 1200 - total flux cleaned = -0.00359987 Jy ! Component: 1250 - total flux cleaned = -0.00356691 Jy ! Component: 1300 - total flux cleaned = -0.00363246 Jy ! Component: 1350 - total flux cleaned = -0.00363232 Jy ! Component: 1400 - total flux cleaned = -0.0036007 Jy ! Component: 1450 - total flux cleaned = -0.00363218 Jy ! Component: 1500 - total flux cleaned = -0.00375495 Jy ! Component: 1550 - total flux cleaned = -0.00384516 Jy ! Component: 1600 - total flux cleaned = -0.00387489 Jy ! Component: 1650 - total flux cleaned = -0.00405067 Jy ! Component: 1700 - total flux cleaned = -0.00410822 Jy ! Component: 1750 - total flux cleaned = -0.00419377 Jy ! Component: 1800 - total flux cleaned = -0.00425055 Jy ! Component: 1850 - total flux cleaned = -0.00438996 Jy ! Component: 1900 - total flux cleaned = -0.00447277 Jy ! Component: 1950 - total flux cleaned = -0.00452714 Jy ! Component: 2000 - total flux cleaned = -0.00460763 Jy ! Component: 2050 - total flux cleaned = -0.00468739 Jy ! Component: 2100 - total flux cleaned = -0.00476621 Jy ! Component: 2150 - total flux cleaned = -0.00484377 Jy ! Component: 2200 - total flux cleaned = -0.0049207 Jy ! Component: 2250 - total flux cleaned = -0.00494595 Jy ! Component: 2300 - total flux cleaned = -0.00497125 Jy ! Component: 2350 - total flux cleaned = -0.00507049 Jy ! Component: 2400 - total flux cleaned = -0.0051686 Jy ! Component: 2450 - total flux cleaned = -0.00519258 Jy ! Component: 2500 - total flux cleaned = -0.00526512 Jy ! Component: 2550 - total flux cleaned = -0.00536043 Jy ! Component: 2600 - total flux cleaned = -0.00540798 Jy ! Component: 2650 - total flux cleaned = -0.00547822 Jy ! Component: 2700 - total flux cleaned = -0.00550119 Jy ! Component: 2750 - total flux cleaned = -0.00563912 Jy ! Component: 2800 - total flux cleaned = -0.0056616 Jy ! Component: 2850 - total flux cleaned = -0.00568413 Jy ! Component: 2900 - total flux cleaned = -0.00579632 Jy ! Component: 2950 - total flux cleaned = -0.00586267 Jy ! Component: 3000 - total flux cleaned = -0.0059953 Jy ! Component: 3050 - total flux cleaned = -0.00601716 Jy ! Component: 3100 - total flux cleaned = -0.00612577 Jy ! Component: 3150 - total flux cleaned = -0.00627691 Jy ! Component: 3200 - total flux cleaned = -0.00640526 Jy ! Component: 3250 - total flux cleaned = -0.00646911 Jy ! Component: 3300 - total flux cleaned = -0.00659586 Jy ! Component: 3350 - total flux cleaned = -0.00670066 Jy ! Component: 3400 - total flux cleaned = -0.00680495 Jy ! Component: 3450 - total flux cleaned = -0.00686702 Jy ! Component: 3500 - total flux cleaned = -0.00705212 Jy ! Component: 3550 - total flux cleaned = -0.00711342 Jy ! Component: 3600 - total flux cleaned = -0.00721521 Jy ! Component: 3650 - total flux cleaned = -0.00735671 Jy ! Component: 3700 - total flux cleaned = -0.00747716 Jy ! Component: 3750 - total flux cleaned = -0.00761696 Jy ! Component: 3800 - total flux cleaned = -0.00765664 Jy ! Component: 3850 - total flux cleaned = -0.0077947 Jy ! Component: 3900 - total flux cleaned = -0.00793193 Jy ! Component: 3950 - total flux cleaned = -0.00801001 Jy ! Component: 4000 - total flux cleaned = -0.00814577 Jy ! Component: 4050 - total flux cleaned = -0.00820371 Jy ! Total flux subtracted in 4096 components = -0.00833828 Jy ! Clean residual min=-0.001420 max=0.000993 Jy/beam ! Clean residual mean=-0.000010 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.13455 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 358 components and 0.13455 Jy ![Exited script file: muppet] wmap "J1154-3242_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.788 x 7.269 at -1.7 degrees (North through East) ! Clean map min=-0.0027966 max=0.11204 Jy/beam ! Writing clean map to FITS file: J1154-3242_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112043 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000332611 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.890585 0.890585 1.78117 3.56234 7.12468 14.2494 28.4987 56.9974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.788 x 7.269 at -1.7 degrees (North through East) ! Clean map min=-0.0027966 max=0.11204 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1154-3242_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:54:15 2019