! Started logfile: J1153-1105_S_2017_06_10_pus_uvs.log on Mon May 6 14:52:22 2019 obs J1153-1105_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1153-1105_S_2017_06_10_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.52202 visibilities/baseline/integration-bin. ! Found source: J1153-1105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 5168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1153-1105_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.875834Jy sigma=0.007554 ! Fit after self-cal, rms=0.865583Jy sigma=0.007467 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=9.52 mas, bpa=13.58 degrees ! Estimated noise=1510.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106827 Jy ! Component: 100 - total flux cleaned = 0.130192 Jy ! Total flux subtracted in 100 components = 0.130192 Jy ! Clean residual min=-0.005972 max=0.006866 Jy/beam ! Clean residual mean=-0.000065 rms=0.001545 Jy/beam ! Combined flux in latest and established models = 0.130192 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.130192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079942Jy sigma=0.000670 ! Fit after self-cal, rms=0.079937Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.059 mas, bmaj=10.53 mas, bpa=11.83 degrees ! Estimated noise=1287.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814221 Jy ! Component: 100 - total flux cleaned = 0.0118986 Jy ! Component: 150 - total flux cleaned = 0.013667 Jy ! Component: 200 - total flux cleaned = 0.0144413 Jy ! Total flux subtracted in 200 components = 0.0144413 Jy ! Clean residual min=-0.003264 max=0.003206 Jy/beam ! Clean residual mean=-0.000029 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.144633 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.144633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079140Jy sigma=0.000664 ! Fit after self-cal, rms=0.079118Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.99 KP 1.03 ! LA 1.01 MK 1.00* NL 0.91 OV 1.01 ! PT 1.05 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00 KP 1.00 ! LA 0.97 MK 1.00* NL 0.98 OV 1.06 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.04 KP 0.99 ! LA 1.01 MK 1.00* NL 1.08 OV 0.94 ! PT 0.95 SC 1.08 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.93 KP 1.00* ! LA 0.94 MK 1.00* NL 1.00* OV 1.00* ! PT 1.10 SC 1.00* ! ! ! Fit before self-cal, rms=0.079118Jy sigma=0.000664 ! Fit after self-cal, rms=0.078713Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.043 mas, bmaj=10.5 mas, bpa=11.95 degrees ! Estimated noise=1297.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239948 Jy ! Component: 100 - total flux cleaned = 0.000371531 Jy ! Component: 150 - total flux cleaned = 0.000416818 Jy ! Component: 200 - total flux cleaned = 0.000458576 Jy ! Total flux subtracted in 200 components = 0.000458576 Jy ! Clean residual min=-0.003357 max=0.002877 Jy/beam ! Clean residual mean=-0.000022 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.145092 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.145092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078692Jy sigma=0.000661 ! Fit after self-cal, rms=0.078698Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078698Jy sigma=0.000661 ! Fit after self-cal, rms=0.078504Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=10.48 mas, bpa=11.9 degrees ! Estimated noise=1296.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141866 Jy ! Component: 100 - total flux cleaned = 0.000113855 Jy ! Component: 150 - total flux cleaned = 0.00015873 Jy ! Component: 200 - total flux cleaned = 0.00017977 Jy ! Total flux subtracted in 200 components = 0.00017977 Jy ! Clean residual min=-0.003280 max=0.002757 Jy/beam ! Clean residual mean=-0.000016 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.145272 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.145272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078486Jy sigma=0.000659 ! Fit after self-cal, rms=0.078487Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.56631e-05 Jy ! Component: 100 - total flux cleaned = 0.000112463 Jy ! Component: 150 - total flux cleaned = 0.000112422 Jy ! Component: 200 - total flux cleaned = 0.00014258 Jy ! Total flux subtracted in 200 components = 0.00014258 Jy ! Clean residual min=-0.003292 max=0.002746 Jy/beam ! Clean residual mean=-0.000015 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.145414 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.145414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078479Jy sigma=0.000659 ! Fit after self-cal, rms=0.078478Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078478Jy sigma=0.000659 ! Fit after self-cal, rms=0.078435Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.048 mas, bmaj=10.46 mas, bpa=11.9 degrees ! Estimated noise=1297.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237828 Jy ! Component: 100 - total flux cleaned = 0.000294472 Jy ! Component: 150 - total flux cleaned = 0.000311997 Jy ! Component: 200 - total flux cleaned = 0.000342037 Jy ! Total flux subtracted in 200 components = 0.000342037 Jy ! Clean residual min=-0.003322 max=0.002713 Jy/beam ! Clean residual mean=-0.000015 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.145756 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.145756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078426Jy sigma=0.000659 ! Fit after self-cal, rms=0.078424Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.94061e-05 Jy ! Component: 100 - total flux cleaned = 3.49977e-05 Jy ! Component: 150 - total flux cleaned = 6.00391e-05 Jy ! Component: 200 - total flux cleaned = 9.62023e-05 Jy ! Total flux subtracted in 200 components = 9.62023e-05 Jy ! Clean residual min=-0.003325 max=0.002705 Jy/beam ! Clean residual mean=-0.000015 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.145853 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.145853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078419Jy sigma=0.000659 ! Fit after self-cal, rms=0.078419Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078419Jy sigma=0.000659 ! Fit after self-cal, rms=0.078402Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.426 mas, bmaj=15.6 mas, bpa=-1.838 degrees ! Estimated noise=1562.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486632 Jy ! Component: 100 - total flux cleaned = 0.000487533 Jy ! Component: 150 - total flux cleaned = 0.000501724 Jy ! Component: 200 - total flux cleaned = 0.000501961 Jy ! Total flux subtracted in 200 components = 0.000501961 Jy ! Clean residual min=-0.003069 max=0.002897 Jy/beam ! Clean residual mean=-0.000024 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.146354 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.146354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078398Jy sigma=0.000659 ! Fit after self-cal, rms=0.078396Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.36761e-05 Jy ! Component: 100 - total flux cleaned = 3.49836e-05 Jy ! Component: 150 - total flux cleaned = 4.56388e-05 Jy ! Component: 200 - total flux cleaned = 4.55172e-05 Jy ! Total flux subtracted in 200 components = 4.55172e-05 Jy ! Clean residual min=-0.003057 max=0.002860 Jy/beam ! Clean residual mean=-0.000024 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.1464 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 0.1464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078394Jy sigma=0.000659 ! Fit after self-cal, rms=0.078394Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=10.45 mas, bpa=11.92 degrees ! Estimated noise=1297.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 10.45 at 11.92 degrees (North through East) ! Clean map min=-0.0032456 max=0.13802 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=9.461 mas, bpa=13.86 degrees ! Estimated noise=1518.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106595 Jy ! Component: 100 - total flux cleaned = 0.129931 Jy ! Component: 150 - total flux cleaned = 0.137541 Jy ! Component: 200 - total flux cleaned = 0.141645 Jy ! Total flux subtracted in 200 components = 0.141645 Jy ! Clean residual min=-0.004028 max=0.003490 Jy/beam ! Clean residual mean=-0.000029 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.141645 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.141645 Jy ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=10.45 mas, bpa=11.92 degrees ! Estimated noise=1297.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259157 Jy ! Component: 100 - total flux cleaned = 0.00310884 Jy ! Component: 150 - total flux cleaned = 0.00343613 Jy ! Component: 200 - total flux cleaned = 0.00371109 Jy ! Total flux subtracted in 200 components = 0.00371109 Jy ! Clean residual min=-0.003448 max=0.002693 Jy/beam ! Clean residual mean=-0.000017 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.145356 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.145356 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.426 mas, bmaj=15.6 mas, bpa=-1.838 degrees ! Estimated noise=1562.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101632 Jy ! Component: 100 - total flux cleaned = 0.00109346 Jy ! Component: 150 - total flux cleaned = 0.00109474 Jy ! Component: 200 - total flux cleaned = 0.0010935 Jy ! Total flux subtracted in 200 components = 0.0010935 Jy ! Clean residual min=-0.003076 max=0.002951 Jy/beam ! Clean residual mean=-0.000025 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.14645 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.09191e-06 Jy ! Component: 100 - total flux cleaned = -1.61761e-06 Jy ! Component: 150 - total flux cleaned = -1.31388e-06 Jy ! Component: 200 - total flux cleaned = 6.81484e-07 Jy ! Total flux subtracted in 200 components = 6.81484e-07 Jy ! Clean residual min=-0.003067 max=0.002910 Jy/beam ! Clean residual mean=-0.000024 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.146451 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.146451 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.049 mas, bmaj=10.45 mas, bpa=11.92 degrees ! Estimated noise=1297.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.23064e-05 Jy ! Component: 100 - total flux cleaned = -6.62337e-05 Jy ! Component: 150 - total flux cleaned = -0.000104515 Jy ! Component: 200 - total flux cleaned = -0.000122334 Jy ! Total flux subtracted in 200 components = -0.000122334 Jy ! Clean residual min=-0.003356 max=0.002698 Jy/beam ! Clean residual mean=-0.000014 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.146328 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.146328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078406Jy sigma=0.000659 ! Fit after self-cal, rms=0.078405Jy sigma=0.000659 wmodel J1153-1105_S_2017_06_10_pus_map.mod ! Writing 55 model components to file: J1153-1105_S_2017_06_10_pus_map.mod wobs J1153-1105_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1153-1105_S_2017_06_10_pus_uvs.fits wwins J1153-1105_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1153-1105_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142658 Jy ! Component: 100 - total flux cleaned = -0.00190633 Jy ! Component: 150 - total flux cleaned = -0.00221703 Jy ! Component: 200 - total flux cleaned = -0.00238108 Jy ! Component: 250 - total flux cleaned = -0.00265455 Jy ! Component: 300 - total flux cleaned = -0.00287722 Jy ! Component: 350 - total flux cleaned = -0.00308963 Jy ! Component: 400 - total flux cleaned = -0.00329292 Jy ! Component: 450 - total flux cleaned = -0.00352102 Jy ! Component: 500 - total flux cleaned = -0.00380546 Jy ! Component: 550 - total flux cleaned = -0.00410956 Jy ! Component: 600 - total flux cleaned = -0.00443367 Jy ! Component: 650 - total flux cleaned = -0.00483469 Jy ! Component: 700 - total flux cleaned = -0.00522453 Jy ! Component: 750 - total flux cleaned = -0.00557684 Jy ! Component: 800 - total flux cleaned = -0.00591954 Jy ! Component: 850 - total flux cleaned = -0.00615074 Jy ! Component: 900 - total flux cleaned = -0.00647579 Jy ! Component: 950 - total flux cleaned = -0.00671891 Jy ! Component: 1000 - total flux cleaned = -0.00691002 Jy ! Component: 1050 - total flux cleaned = -0.00714227 Jy ! Component: 1100 - total flux cleaned = -0.00723326 Jy ! Component: 1150 - total flux cleaned = -0.00747824 Jy ! Component: 1200 - total flux cleaned = -0.00765184 Jy ! Component: 1250 - total flux cleaned = -0.00782201 Jy ! Component: 1300 - total flux cleaned = -0.00796828 Jy ! Component: 1350 - total flux cleaned = -0.00807126 Jy ! Component: 1400 - total flux cleaned = -0.00823265 Jy ! Component: 1450 - total flux cleaned = -0.0082523 Jy ! Component: 1500 - total flux cleaned = -0.0083691 Jy ! Component: 1550 - total flux cleaned = -0.00834998 Jy ! Component: 1600 - total flux cleaned = -0.00848232 Jy ! Component: 1650 - total flux cleaned = -0.00850087 Jy ! Component: 1700 - total flux cleaned = -0.00853774 Jy ! Component: 1750 - total flux cleaned = -0.00855578 Jy ! Component: 1800 - total flux cleaned = -0.00859181 Jy ! Component: 1850 - total flux cleaned = -0.00864492 Jy ! Component: 1900 - total flux cleaned = -0.00867986 Jy ! Component: 1950 - total flux cleaned = -0.00880046 Jy ! Component: 2000 - total flux cleaned = -0.00881759 Jy ! Component: 2050 - total flux cleaned = -0.00886836 Jy ! Component: 2100 - total flux cleaned = -0.00896859 Jy ! Component: 2150 - total flux cleaned = -0.00895191 Jy ! Component: 2200 - total flux cleaned = -0.00898454 Jy ! Component: 2250 - total flux cleaned = -0.00896839 Jy ! Component: 2300 - total flux cleaned = -0.0089846 Jy ! Component: 2350 - total flux cleaned = -0.00896886 Jy ! Component: 2400 - total flux cleaned = -0.00903196 Jy ! Component: 2450 - total flux cleaned = -0.00901632 Jy ! Component: 2500 - total flux cleaned = -0.00896967 Jy ! Component: 2550 - total flux cleaned = -0.00890797 Jy ! Component: 2600 - total flux cleaned = -0.00887714 Jy ! Component: 2650 - total flux cleaned = -0.00883152 Jy ! Component: 2700 - total flux cleaned = -0.00877084 Jy ! Component: 2750 - total flux cleaned = -0.00869568 Jy ! Component: 2800 - total flux cleaned = -0.00859108 Jy ! Component: 2850 - total flux cleaned = -0.0085316 Jy ! Component: 2900 - total flux cleaned = -0.00841329 Jy ! Component: 2950 - total flux cleaned = -0.00835448 Jy ! Component: 3000 - total flux cleaned = -0.00829596 Jy ! Component: 3050 - total flux cleaned = -0.00819388 Jy ! Component: 3100 - total flux cleaned = -0.0081649 Jy ! Component: 3150 - total flux cleaned = -0.00806363 Jy ! Component: 3200 - total flux cleaned = -0.00802041 Jy ! Component: 3250 - total flux cleaned = -0.00793433 Jy ! Component: 3300 - total flux cleaned = -0.0078487 Jy ! Component: 3350 - total flux cleaned = -0.00779191 Jy ! Component: 3400 - total flux cleaned = -0.00776357 Jy ! Component: 3450 - total flux cleaned = -0.00766468 Jy ! Component: 3500 - total flux cleaned = -0.00756625 Jy ! Component: 3550 - total flux cleaned = -0.00752428 Jy ! Component: 3600 - total flux cleaned = -0.00742648 Jy ! Component: 3650 - total flux cleaned = -0.00734294 Jy ! Component: 3700 - total flux cleaned = -0.00724583 Jy ! Component: 3750 - total flux cleaned = -0.00714909 Jy ! Component: 3800 - total flux cleaned = -0.00703869 Jy ! Component: 3850 - total flux cleaned = -0.00695621 Jy ! Component: 3900 - total flux cleaned = -0.00687389 Jy ! Component: 3950 - total flux cleaned = -0.00680551 Jy ! Component: 4000 - total flux cleaned = -0.00675082 Jy ! Component: 4050 - total flux cleaned = -0.00669632 Jy ! Total flux subtracted in 4096 components = -0.00664186 Jy ! Clean residual min=-0.000814 max=0.000829 Jy/beam ! Clean residual mean=-0.000002 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.139686 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 301 components and 0.139687 Jy ![Exited script file: muppet] wmap "J1153-1105_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 10.45 at 11.92 degrees (North through East) ! Clean map min=-0.0019333 max=0.1384 Jy/beam ! Writing clean map to FITS file: J1153-1105_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.138395 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227094 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.492273 0.492273 0.984546 1.96909 3.93818 7.87637 15.7527 31.5055 63.0109 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.138 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.049 x 10.45 at 11.92 degrees (North through East) ! Clean map min=-0.0019333 max=0.1384 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1153-1105_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:52:27 2019