! Started logfile: J1153+8058_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:47:26 2019 obs J1153+8058_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1153+8058_S_2017_05_31_pus_uva.fits ! AN table 1: 191 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.971844 visibilities/baseline/integration-bin. ! Found source: J1153+8058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 33412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1153+8058_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 986 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.505873Jy sigma=0.003970 ! Fit after self-cal, rms=0.466593Jy sigma=0.003627 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=3.378 mas, bpa=-58.48 degrees ! Estimated noise=883.437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.541157 Jy ! Component: 100 - total flux cleaned = 0.757725 Jy ! Total flux subtracted in 100 components = 0.757725 Jy ! Clean residual min=-0.032788 max=0.096807 Jy/beam ! Clean residual mean=0.000007 rms=0.009022 Jy/beam ! Combined flux in latest and established models = 0.757725 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.757725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263813Jy sigma=0.002044 ! Fit after self-cal, rms=0.257081Jy sigma=0.001983 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120434 Jy ! Component: 100 - total flux cleaned = 0.185494 Jy ! Total flux subtracted in 100 components = 0.185494 Jy ! Clean residual min=-0.022577 max=0.040611 Jy/beam ! Clean residual mean=0.000003 rms=0.004753 Jy/beam ! Combined flux in latest and established models = 0.943219 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 27 components and 0.943219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172231Jy sigma=0.001233 ! Fit after self-cal, rms=0.169530Jy sigma=0.001202 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481199 Jy ! Component: 100 - total flux cleaned = 0.0753288 Jy ! Total flux subtracted in 100 components = 0.0753288 Jy ! Clean residual min=-0.019005 max=0.028812 Jy/beam ! Clean residual mean=0.000001 rms=0.003672 Jy/beam ! Combined flux in latest and established models = 1.01855 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 1.01855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152636Jy sigma=0.001073 ! Fit after self-cal, rms=0.152460Jy sigma=0.001068 ! Inverting map ! Added new window around map position (1.5, -4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165033 Jy ! Component: 100 - total flux cleaned = 0.0237668 Jy ! Total flux subtracted in 100 components = 0.0237668 Jy ! Clean residual min=-0.017493 max=0.018198 Jy/beam ! Clean residual mean=-0.000001 rms=0.003282 Jy/beam ! Combined flux in latest and established models = 1.04231 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 1.04231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147880Jy sigma=0.001037 ! Fit after self-cal, rms=0.147679Jy sigma=0.001034 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4 mas, bmaj=4.214 mas, bpa=-74.01 degrees ! Estimated noise=521.186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626508 Jy ! Component: 100 - total flux cleaned = 0.00587096 Jy ! Component: 150 - total flux cleaned = 0.00552063 Jy ! Component: 200 - total flux cleaned = 0.00606401 Jy ! Total flux subtracted in 200 components = 0.00606401 Jy ! Clean residual min=-0.013017 max=0.013037 Jy/beam ! Clean residual mean=-0.000030 rms=0.002648 Jy/beam ! Combined flux in latest and established models = 1.04838 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 1.04838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145511Jy sigma=0.001021 ! Fit after self-cal, rms=0.145372Jy sigma=0.001019 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.97 KP 1.01 ! LA 1.00 MK 1.01 NL 0.89 OV 1.00 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.01 KP 0.97 ! LA 0.97 MK 1.01 NL 1.01 OV 1.13 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.06 HN 1.01 KP 0.98 ! LA 0.99 MK 1.05 NL 0.97 OV 0.97 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.03 KP 1.00* ! LA 1.08 MK 0.98 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.145372Jy sigma=0.001019 ! Fit after self-cal, rms=0.151872Jy sigma=0.000907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.009 mas, bmaj=4.225 mas, bpa=-73.92 degrees ! Estimated noise=523.445 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107488 Jy ! Component: 100 - total flux cleaned = 0.0119538 Jy ! Component: 150 - total flux cleaned = 0.012213 Jy ! Component: 200 - total flux cleaned = 0.0124564 Jy ! Total flux subtracted in 200 components = 0.0124564 Jy ! Clean residual min=-0.010443 max=0.009321 Jy/beam ! Clean residual mean=-0.000003 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 1.06083 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 1.06083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150436Jy sigma=0.000896 ! Fit after self-cal, rms=0.150344Jy sigma=0.000894 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150344Jy sigma=0.000894 ! Fit after self-cal, rms=0.125567Jy sigma=0.000831 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.033 mas, bmaj=4.22 mas, bpa=-70.54 degrees ! Estimated noise=525.938 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482544 Jy ! Component: 100 - total flux cleaned = 0.00526635 Jy ! Component: 150 - total flux cleaned = 0.00566354 Jy ! Component: 200 - total flux cleaned = 0.00585256 Jy ! Total flux subtracted in 200 components = 0.00585256 Jy ! Clean residual min=-0.006659 max=0.007203 Jy/beam ! Clean residual mean=-0.000000 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 1.06669 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 1.06669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124606Jy sigma=0.000825 ! Fit after self-cal, rms=0.124515Jy sigma=0.000824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.5, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538963 Jy ! Component: 100 - total flux cleaned = 0.00770601 Jy ! Component: 150 - total flux cleaned = 0.00886114 Jy ! Component: 200 - total flux cleaned = 0.00937054 Jy ! Total flux subtracted in 200 components = 0.00937054 Jy ! Clean residual min=-0.006247 max=0.004960 Jy/beam ! Clean residual mean=0.000003 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 1.07606 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 1.07606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123699Jy sigma=0.000817 ! Fit after self-cal, rms=0.123609Jy sigma=0.000816 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123609Jy sigma=0.000816 ! Fit after self-cal, rms=0.123645Jy sigma=0.000816 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=4.219 mas, bpa=-72.75 degrees ! Estimated noise=526.316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398759 Jy ! Component: 100 - total flux cleaned = 0.00505039 Jy ! Component: 150 - total flux cleaned = 0.00568539 Jy ! Component: 200 - total flux cleaned = 0.00612929 Jy ! Total flux subtracted in 200 components = 0.00612929 Jy ! Clean residual min=-0.005897 max=0.005043 Jy/beam ! Clean residual mean=0.000004 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 1.08219 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 1.08219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123017Jy sigma=0.000812 ! Fit after self-cal, rms=0.122953Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366849 Jy ! Component: 100 - total flux cleaned = 0.000808602 Jy ! Component: 150 - total flux cleaned = 0.000947887 Jy ! Component: 200 - total flux cleaned = 0.00133183 Jy ! Total flux subtracted in 200 components = 0.00133183 Jy ! Clean residual min=-0.005622 max=0.004689 Jy/beam ! Clean residual mean=0.000003 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 1.08352 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 1.08352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122542Jy sigma=0.000809 ! Fit after self-cal, rms=0.122488Jy sigma=0.000808 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122488Jy sigma=0.000808 ! Fit after self-cal, rms=0.122817Jy sigma=0.000808 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.785 mas, bmaj=9.03 mas, bpa=-82.1 degrees ! Estimated noise=671.148 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454334 Jy ! Component: 100 - total flux cleaned = 0.00684158 Jy ! Component: 150 - total flux cleaned = 0.00784798 Jy ! Component: 200 - total flux cleaned = 0.00833704 Jy ! Total flux subtracted in 200 components = 0.00833704 Jy ! Clean residual min=-0.004142 max=0.005779 Jy/beam ! Clean residual mean=0.000008 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 1.09186 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 1.09186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122607Jy sigma=0.000807 ! Fit after self-cal, rms=0.122548Jy sigma=0.000807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348127 Jy ! Component: 100 - total flux cleaned = 0.000670881 Jy ! Component: 150 - total flux cleaned = 0.00111143 Jy ! Component: 200 - total flux cleaned = 0.00147013 Jy ! Total flux subtracted in 200 components = 0.00147013 Jy ! Clean residual min=-0.004133 max=0.005701 Jy/beam ! Clean residual mean=0.000008 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 1.09333 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 1.09333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122502Jy sigma=0.000806 ! Fit after self-cal, rms=0.122448Jy sigma=0.000806 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=4.221 mas, bpa=-73.8 degrees ! Estimated noise=527.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.023 x 4.221 at -73.8 degrees (North through East) ! Clean map min=-0.0046707 max=0.63767 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122448Jy sigma=0.000806 ! Fit after self-cal, rms=0.083885Jy sigma=0.000647 ! Inverting map and beam ! Estimated beam: bmin=4.019 mas, bmaj=4.225 mas, bpa=-74.71 degrees ! Estimated noise=526.744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000469753 Jy ! Component: 100 - total flux cleaned = 0.000481815 Jy ! Component: 150 - total flux cleaned = 0.000713626 Jy ! Component: 200 - total flux cleaned = 0.000925333 Jy ! Total flux subtracted in 200 components = 0.000925333 Jy ! Clean residual min=-0.004537 max=0.004336 Jy/beam ! Clean residual mean=0.000000 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 1.09425 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 124 components and 1.09425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083402Jy sigma=0.000644 ! Fit after self-cal, rms=0.083336Jy sigma=0.000643 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001927 Jy ! Component: 100 - total flux cleaned = 0.000418716 Jy ! Component: 150 - total flux cleaned = 0.000523134 Jy ! Component: 200 - total flux cleaned = 0.000621489 Jy ! Total flux subtracted in 200 components = 0.000621489 Jy ! Clean residual min=-0.004276 max=0.004233 Jy/beam ! Clean residual mean=0.000000 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 1.09487 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 129 components and 1.09487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082989Jy sigma=0.000641 ! Fit after self-cal, rms=0.082941Jy sigma=0.000641 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082941Jy sigma=0.000641 ! Fit after self-cal, rms=0.082873Jy sigma=0.000641 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=3.392 mas, bpa=-58.76 degrees ! Estimated noise=894.107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.559867 Jy ! Component: 100 - total flux cleaned = 0.782362 Jy ! Component: 150 - total flux cleaned = 0.891897 Jy ! Component: 200 - total flux cleaned = 0.956327 Jy ! Total flux subtracted in 200 components = 0.956327 Jy ! Clean residual min=-0.009434 max=0.032760 Jy/beam ! Clean residual mean=0.000004 rms=0.002934 Jy/beam ! Combined flux in latest and established models = 0.956327 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.956327 Jy ! Inverting map and beam ! Estimated beam: bmin=4.018 mas, bmaj=4.227 mas, bpa=-74.61 degrees ! Estimated noise=526.794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512549 Jy ! Component: 100 - total flux cleaned = 0.0774813 Jy ! Component: 150 - total flux cleaned = 0.0931582 Jy ! Component: 200 - total flux cleaned = 0.103835 Jy ! Total flux subtracted in 200 components = 0.103835 Jy ! Clean residual min=-0.003751 max=0.007692 Jy/beam ! Clean residual mean=-0.000000 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 1.06016 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 62 components and 1.06016 Jy ! Inverting map ! Added new window around map position (-0.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853495 Jy ! Component: 100 - total flux cleaned = 0.0150642 Jy ! Component: 150 - total flux cleaned = 0.0202724 Jy ! Component: 200 - total flux cleaned = 0.0244511 Jy ! Total flux subtracted in 200 components = 0.0244511 Jy ! Clean residual min=-0.003084 max=0.003668 Jy/beam ! Clean residual mean=-0.000003 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 1.08461 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 84 components and 1.08461 Jy ! Inverting map ! Added new window around map position (12, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324547 Jy ! Component: 100 - total flux cleaned = 0.00493042 Jy ! Component: 150 - total flux cleaned = 0.00620319 Jy ! Component: 200 - total flux cleaned = 0.0071558 Jy ! Total flux subtracted in 200 components = 0.0071558 Jy ! Clean residual min=-0.002989 max=0.003372 Jy/beam ! Clean residual mean=-0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 1.09177 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 106 components and 1.09177 Jy ! Inverting map ! Added new window around map position (-16.5, 28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262833 Jy ! Component: 100 - total flux cleaned = 0.00376537 Jy ! Component: 150 - total flux cleaned = 0.00448291 Jy ! Component: 200 - total flux cleaned = 0.0050788 Jy ! Total flux subtracted in 200 components = 0.0050788 Jy ! Clean residual min=-0.002877 max=0.002777 Jy/beam ! Clean residual mean=-0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 1.09685 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 119 components and 1.09685 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.777 mas, bmaj=9.031 mas, bpa=-80.62 degrees ! Estimated noise=670.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206599 Jy ! Component: 100 - total flux cleaned = 0.00329168 Jy ! Component: 150 - total flux cleaned = 0.00361112 Jy ! Component: 200 - total flux cleaned = 0.0037157 Jy ! Total flux subtracted in 200 components = 0.0037157 Jy ! Clean residual min=-0.002579 max=0.004418 Jy/beam ! Clean residual mean=-0.000001 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 1.10056 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (57, -96.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480785 Jy ! Component: 100 - total flux cleaned = 0.00789244 Jy ! Component: 150 - total flux cleaned = 0.0100342 Jy ! Component: 200 - total flux cleaned = 0.0113774 Jy ! Total flux subtracted in 200 components = 0.0113774 Jy ! Clean residual min=-0.002296 max=0.002977 Jy/beam ! Clean residual mean=-0.000010 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 1.11194 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 216 components and 1.11194 Jy ! Inverting map ! Added new window around map position (34.5, -49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250734 Jy ! Component: 100 - total flux cleaned = 0.00363047 Jy ! Component: 150 - total flux cleaned = 0.00459637 Jy ! Component: 200 - total flux cleaned = 0.00538554 Jy ! Total flux subtracted in 200 components = 0.00538554 Jy ! Clean residual min=-0.001887 max=0.002134 Jy/beam ! Clean residual mean=-0.000012 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 1.11733 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 257 components and 1.11733 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.018 mas, bmaj=4.227 mas, bpa=-74.61 degrees ! Estimated noise=526.794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000935596 Jy ! Component: 100 - total flux cleaned = 0.00167579 Jy ! Component: 150 - total flux cleaned = 0.00202392 Jy ! Component: 200 - total flux cleaned = 0.0023552 Jy ! Total flux subtracted in 200 components = 0.0023552 Jy ! Clean residual min=-0.002169 max=0.002119 Jy/beam ! Clean residual mean=-0.000006 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 1.11968 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 286 components and 1.11968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080481Jy sigma=0.000627 ! Fit after self-cal, rms=0.080319Jy sigma=0.000626 wmodel J1153+8058_S_2017_05_31_pus_map.mod ! Writing 286 model components to file: J1153+8058_S_2017_05_31_pus_map.mod wobs J1153+8058_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1153+8058_S_2017_05_31_pus_uvs.fits wwins J1153+8058_S_2017_05_31_pus_map.win ! wwins: Wrote 9 windows to J1153+8058_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000141219 Jy ! Component: 100 - total flux cleaned = 0.000275841 Jy ! Component: 150 - total flux cleaned = 0.000474241 Jy ! Component: 200 - total flux cleaned = 0.000728825 Jy ! Component: 250 - total flux cleaned = 0.0008835 Jy ! Component: 300 - total flux cleaned = 0.000973881 Jy ! Component: 350 - total flux cleaned = 0.00103248 Jy ! Component: 400 - total flux cleaned = 0.00111815 Jy ! Component: 450 - total flux cleaned = 0.00120283 Jy ! Component: 500 - total flux cleaned = 0.00125865 Jy ! Component: 550 - total flux cleaned = 0.00131343 Jy ! Component: 600 - total flux cleaned = 0.00144687 Jy ! Component: 650 - total flux cleaned = 0.00141971 Jy ! Component: 700 - total flux cleaned = 0.00144569 Jy ! Component: 750 - total flux cleaned = 0.00149715 Jy ! Component: 800 - total flux cleaned = 0.00149751 Jy ! Component: 850 - total flux cleaned = 0.00162295 Jy ! Component: 900 - total flux cleaned = 0.00167247 Jy ! Component: 950 - total flux cleaned = 0.00169689 Jy ! Component: 1000 - total flux cleaned = 0.00176961 Jy ! Component: 1050 - total flux cleaned = 0.00184113 Jy ! Component: 1100 - total flux cleaned = 0.00186431 Jy ! Component: 1150 - total flux cleaned = 0.00188768 Jy ! Component: 1200 - total flux cleaned = 0.00188734 Jy ! Component: 1250 - total flux cleaned = 0.00197971 Jy ! Component: 1300 - total flux cleaned = 0.00197961 Jy ! Component: 1350 - total flux cleaned = 0.0019795 Jy ! Component: 1400 - total flux cleaned = 0.00200214 Jy ! Component: 1450 - total flux cleaned = 0.0020468 Jy ! Component: 1500 - total flux cleaned = 0.00204674 Jy ! Component: 1550 - total flux cleaned = 0.00204718 Jy ! Component: 1600 - total flux cleaned = 0.00213356 Jy ! Component: 1650 - total flux cleaned = 0.0021551 Jy ! Component: 1700 - total flux cleaned = 0.00224008 Jy ! Component: 1750 - total flux cleaned = 0.00219785 Jy ! Component: 1800 - total flux cleaned = 0.00223943 Jy ! Component: 1850 - total flux cleaned = 0.00226003 Jy ! Component: 1900 - total flux cleaned = 0.00228047 Jy ! Component: 1950 - total flux cleaned = 0.00225994 Jy ! Component: 2000 - total flux cleaned = 0.00225992 Jy ! Component: 2050 - total flux cleaned = 0.00234019 Jy ! Component: 2100 - total flux cleaned = 0.0022605 Jy ! Component: 2150 - total flux cleaned = 0.00231983 Jy ! Component: 2200 - total flux cleaned = 0.0022019 Jy ! Component: 2250 - total flux cleaned = 0.00226055 Jy ! Component: 2300 - total flux cleaned = 0.00224118 Jy ! Component: 2350 - total flux cleaned = 0.00227971 Jy ! Component: 2400 - total flux cleaned = 0.00229896 Jy ! Component: 2450 - total flux cleaned = 0.00226118 Jy ! Component: 2500 - total flux cleaned = 0.00218599 Jy ! Component: 2550 - total flux cleaned = 0.00226088 Jy ! Component: 2600 - total flux cleaned = 0.00226077 Jy ! Component: 2650 - total flux cleaned = 0.00222394 Jy ! Component: 2700 - total flux cleaned = 0.0022788 Jy ! Component: 2750 - total flux cleaned = 0.00235155 Jy ! Component: 2800 - total flux cleaned = 0.00236935 Jy ! Component: 2850 - total flux cleaned = 0.00233318 Jy ! Component: 2900 - total flux cleaned = 0.00231562 Jy ! Component: 2950 - total flux cleaned = 0.00231556 Jy ! Component: 3000 - total flux cleaned = 0.00233313 Jy ! Component: 3050 - total flux cleaned = 0.0023155 Jy ! Component: 3100 - total flux cleaned = 0.00236774 Jy ! Component: 3150 - total flux cleaned = 0.0023504 Jy ! Component: 3200 - total flux cleaned = 0.00233299 Jy ! Component: 3250 - total flux cleaned = 0.00240144 Jy ! Component: 3300 - total flux cleaned = 0.00235041 Jy ! Component: 3350 - total flux cleaned = 0.00238412 Jy ! Component: 3400 - total flux cleaned = 0.00236741 Jy ! Component: 3450 - total flux cleaned = 0.00235062 Jy ! Component: 3500 - total flux cleaned = 0.00240042 Jy ! Component: 3550 - total flux cleaned = 0.00238407 Jy ! Component: 3600 - total flux cleaned = 0.00238397 Jy ! Component: 3650 - total flux cleaned = 0.00240028 Jy ! Component: 3700 - total flux cleaned = 0.00240036 Jy ! Component: 3750 - total flux cleaned = 0.00240034 Jy ! Component: 3800 - total flux cleaned = 0.00235211 Jy ! Component: 3850 - total flux cleaned = 0.00238422 Jy ! Component: 3900 - total flux cleaned = 0.0023524 Jy ! Component: 3950 - total flux cleaned = 0.00239978 Jy ! Component: 4000 - total flux cleaned = 0.00239971 Jy ! Component: 4050 - total flux cleaned = 0.00233713 Jy ! Total flux subtracted in 4096 components = 0.0023527 Jy ! Clean residual min=-0.000913 max=0.000817 Jy/beam ! Clean residual mean=-0.000004 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 1.12203 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 591 components and 1.12203 Jy ![Exited script file: muppet] wmap "J1153+8058_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.018 x 4.227 at -74.61 degrees (North through East) ! Clean map min=-0.0016322 max=0.63306 Jy/beam ! Writing clean map to FITS file: J1153+8058_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.63306 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000273692 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.1297 0.1297 0.259399 0.518799 1.0376 2.0752 4.15039 8.30078 16.6016 33.2031 66.4063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.633 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.018 x 4.227 at -74.61 degrees (North through East) ! Clean map min=-0.0016322 max=0.63306 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1153+8058_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:47:33 2019