! Started logfile: J1152-0841_S_2017_09_26_pus_uvs.log on Sat May 11 13:01:24 2019 obs J1152-0841_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1152-0841_S_2017_09_26_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.910256 visibilities/baseline/integration-bin. ! Found source: J1152-0841 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1704 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1152-0841_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.290093Jy sigma=0.002287 ! Fit after self-cal, rms=0.210117Jy sigma=0.001702 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=14.75 mas, bpa=-12.95 degrees ! Estimated noise=3305.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.636541 Jy ! Component: 100 - total flux cleaned = 0.778637 Jy ! Total flux subtracted in 100 components = 0.778637 Jy ! Clean residual min=-0.031111 max=0.053409 Jy/beam ! Clean residual mean=0.000086 rms=0.011513 Jy/beam ! Combined flux in latest and established models = 0.778637 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.778637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157253Jy sigma=0.001095 ! Fit after self-cal, rms=0.157250Jy sigma=0.001095 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=17.43 mas, bpa=-13.54 degrees ! Estimated noise=2901.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0644203 Jy ! Component: 100 - total flux cleaned = 0.0988587 Jy ! Component: 150 - total flux cleaned = 0.120757 Jy ! Component: 200 - total flux cleaned = 0.134998 Jy ! Total flux subtracted in 200 components = 0.134998 Jy ! Clean residual min=-0.025358 max=0.028641 Jy/beam ! Clean residual mean=0.000064 rms=0.008508 Jy/beam ! Combined flux in latest and established models = 0.913635 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 52 components and 0.913635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122821Jy sigma=0.000895 ! Fit after self-cal, rms=0.122760Jy sigma=0.000894 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.09 HN 0.97 KP 1.05 ! LA 1.01 MK 1.01 NL 0.94 OV 0.98 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.00 KP 1.00 ! LA 0.97 MK 0.99 NL 0.92 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.99 KP 0.99 ! LA 0.98 MK 1.02 NL 0.92 OV 0.90 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.26 HN 0.97 KP 1.00* ! LA 1.00* MK 1.01 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.122760Jy sigma=0.000894 ! Fit after self-cal, rms=0.099967Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=17.5 mas, bpa=-13.7 degrees ! Estimated noise=2903.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0065624 Jy ! Component: 100 - total flux cleaned = -0.00727469 Jy ! Component: 150 - total flux cleaned = -0.00767067 Jy ! Component: 200 - total flux cleaned = -0.00803118 Jy ! Total flux subtracted in 200 components = -0.00803118 Jy ! Clean residual min=-0.011565 max=0.008135 Jy/beam ! Clean residual mean=0.000004 rms=0.002442 Jy/beam ! Combined flux in latest and established models = 0.905603 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.905603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099091Jy sigma=0.000711 ! Fit after self-cal, rms=0.099021Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099021Jy sigma=0.000710 ! Fit after self-cal, rms=0.098643Jy sigma=0.000709 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.639 mas, bmaj=17.56 mas, bpa=-13.72 degrees ! Estimated noise=2902.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00509193 Jy ! Component: 100 - total flux cleaned = -0.00544085 Jy ! Component: 150 - total flux cleaned = -0.00573564 Jy ! Component: 200 - total flux cleaned = -0.00599062 Jy ! Total flux subtracted in 200 components = -0.00599062 Jy ! Clean residual min=-0.009879 max=0.007508 Jy/beam ! Clean residual mean=0.000004 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 0.899613 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.899613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098199Jy sigma=0.000705 ! Fit after self-cal, rms=0.098198Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.80656e-05 Jy ! Component: 100 - total flux cleaned = -0.000169011 Jy ! Component: 150 - total flux cleaned = -0.000350611 Jy ! Component: 200 - total flux cleaned = -0.000510292 Jy ! Total flux subtracted in 200 components = -0.000510292 Jy ! Clean residual min=-0.009493 max=0.007470 Jy/beam ! Clean residual mean=0.000005 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 0.899103 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.899103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098049Jy sigma=0.000703 ! Fit after self-cal, rms=0.098049Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098049Jy sigma=0.000703 ! Fit after self-cal, rms=0.097782Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=17.62 mas, bpa=-13.74 degrees ! Estimated noise=2902.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00343625 Jy ! Component: 100 - total flux cleaned = -0.00364727 Jy ! Component: 150 - total flux cleaned = -0.00373533 Jy ! Component: 200 - total flux cleaned = -0.00373423 Jy ! Total flux subtracted in 200 components = -0.00373423 Jy ! Clean residual min=-0.008922 max=0.006775 Jy/beam ! Clean residual mean=0.000003 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 0.895368 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.895368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097599Jy sigma=0.000701 ! Fit after self-cal, rms=0.097598Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.97141e-05 Jy ! Component: 100 - total flux cleaned = 8.77738e-05 Jy ! Component: 150 - total flux cleaned = 8.58668e-05 Jy ! Component: 200 - total flux cleaned = 8.57174e-05 Jy ! Total flux subtracted in 200 components = 8.57174e-05 Jy ! Clean residual min=-0.008815 max=0.006679 Jy/beam ! Clean residual mean=0.000003 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.895454 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 87 components and 0.895454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097538Jy sigma=0.000700 ! Fit after self-cal, rms=0.097539Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097539Jy sigma=0.000700 ! Fit after self-cal, rms=0.097331Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.451 mas, bmaj=19.24 mas, bpa=-2.95 degrees ! Estimated noise=3414.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000940858 Jy ! Component: 100 - total flux cleaned = -0.00105698 Jy ! Component: 150 - total flux cleaned = -0.00110404 Jy ! Component: 200 - total flux cleaned = -0.00114687 Jy ! Total flux subtracted in 200 components = -0.00114687 Jy ! Clean residual min=-0.008085 max=0.006215 Jy/beam ! Clean residual mean=0.000005 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 0.894307 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.894307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097317Jy sigma=0.000699 ! Fit after self-cal, rms=0.097312Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.72074e-05 Jy ! Component: 100 - total flux cleaned = -0.000132986 Jy ! Component: 150 - total flux cleaned = -0.000208813 Jy ! Component: 200 - total flux cleaned = -0.000276684 Jy ! Total flux subtracted in 200 components = -0.000276684 Jy ! Clean residual min=-0.007944 max=0.006338 Jy/beam ! Clean residual mean=0.000005 rms=0.002078 Jy/beam ! Combined flux in latest and established models = 0.894031 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 110 components and 0.89403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097320Jy sigma=0.000699 ! Fit after self-cal, rms=0.097316Jy sigma=0.000699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.64 mas, bmaj=17.67 mas, bpa=-13.76 degrees ! Estimated noise=2902.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.64 x 17.67 at -13.76 degrees (North through East) ! Clean map min=-0.0081159 max=0.81703 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097316Jy sigma=0.000699 ! Fit after self-cal, rms=0.085439Jy sigma=0.000607 ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=17.71 mas, bpa=-13.76 degrees ! Estimated noise=2904.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00242072 Jy ! Component: 100 - total flux cleaned = -0.00256974 Jy ! Component: 150 - total flux cleaned = -0.00263166 Jy ! Component: 200 - total flux cleaned = -0.00268812 Jy ! Total flux subtracted in 200 components = -0.00268812 Jy ! Clean residual min=-0.008279 max=0.006471 Jy/beam ! Clean residual mean=0.000002 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.891342 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 114 components and 0.891342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085340Jy sigma=0.000606 ! Fit after self-cal, rms=0.085339Jy sigma=0.000606 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.04105e-05 Jy ! Component: 100 - total flux cleaned = -5.95808e-05 Jy ! Component: 150 - total flux cleaned = -5.84994e-05 Jy ! Component: 200 - total flux cleaned = -5.84587e-05 Jy ! Total flux subtracted in 200 components = -5.84587e-05 Jy ! Clean residual min=-0.008149 max=0.006413 Jy/beam ! Clean residual mean=0.000002 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.891284 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 118 components and 0.891284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085304Jy sigma=0.000605 ! Fit after self-cal, rms=0.085303Jy sigma=0.000605 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085303Jy sigma=0.000605 ! Fit after self-cal, rms=0.085185Jy sigma=0.000605 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=14.98 mas, bpa=-13.18 degrees ! Estimated noise=3327.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.638935 Jy ! Component: 100 - total flux cleaned = 0.778319 Jy ! Component: 150 - total flux cleaned = 0.818674 Jy ! Component: 200 - total flux cleaned = 0.841316 Jy ! Total flux subtracted in 200 components = 0.841316 Jy ! Clean residual min=-0.009336 max=0.013720 Jy/beam ! Clean residual mean=0.000016 rms=0.002940 Jy/beam ! Combined flux in latest and established models = 0.841316 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.841316 Jy ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=17.74 mas, bpa=-13.77 degrees ! Estimated noise=2903.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182974 Jy ! Component: 100 - total flux cleaned = 0.0280342 Jy ! Component: 150 - total flux cleaned = 0.0338087 Jy ! Component: 200 - total flux cleaned = 0.0377899 Jy ! Total flux subtracted in 200 components = 0.0377899 Jy ! Clean residual min=-0.006874 max=0.007224 Jy/beam ! Clean residual mean=0.000010 rms=0.001831 Jy/beam ! Combined flux in latest and established models = 0.879106 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 116 components and 0.879106 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.455 mas, bmaj=19.29 mas, bpa=-3.066 degrees ! Estimated noise=3412.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405812 Jy ! Component: 100 - total flux cleaned = 0.00658989 Jy ! Component: 150 - total flux cleaned = 0.00813776 Jy ! Component: 200 - total flux cleaned = 0.0086004 Jy ! Total flux subtracted in 200 components = 0.0086004 Jy ! Clean residual min=-0.006710 max=0.006640 Jy/beam ! Clean residual mean=0.000009 rms=0.001974 Jy/beam ! Combined flux in latest and established models = 0.887707 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362361 Jy ! Component: 100 - total flux cleaned = 0.000685031 Jy ! Component: 150 - total flux cleaned = 0.000939386 Jy ! Component: 200 - total flux cleaned = 0.0011705 Jy ! Total flux subtracted in 200 components = 0.0011705 Jy ! Clean residual min=-0.006785 max=0.006504 Jy/beam ! Clean residual mean=0.000008 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 0.888877 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.888877 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=17.74 mas, bpa=-13.77 degrees ! Estimated noise=2903.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036917 Jy ! Component: 100 - total flux cleaned = -0.000134675 Jy ! Component: 150 - total flux cleaned = 0.000142262 Jy ! Component: 200 - total flux cleaned = 0.000259057 Jy ! Total flux subtracted in 200 components = 0.000259057 Jy ! Clean residual min=-0.007122 max=0.006508 Jy/beam ! Clean residual mean=0.000003 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.889136 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 134 components and 0.889136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085125Jy sigma=0.000605 ! Fit after self-cal, rms=0.085119Jy sigma=0.000605 wmodel J1152-0841_S_2017_09_26_pus_map.mod ! Writing 134 model components to file: J1152-0841_S_2017_09_26_pus_map.mod wobs J1152-0841_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1152-0841_S_2017_09_26_pus_uvs.fits wwins J1152-0841_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1152-0841_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.10139e-05 Jy ! Component: 100 - total flux cleaned = 0.000329405 Jy ! Component: 150 - total flux cleaned = 0.000686344 Jy ! Component: 200 - total flux cleaned = 0.00111 Jy ! Component: 250 - total flux cleaned = 0.00095412 Jy ! Component: 300 - total flux cleaned = 0.0011037 Jy ! Component: 350 - total flux cleaned = 0.0013912 Jy ! Component: 400 - total flux cleaned = 0.00159808 Jy ! Component: 450 - total flux cleaned = 0.0019281 Jy ! Component: 500 - total flux cleaned = 0.00224262 Jy ! Component: 550 - total flux cleaned = 0.00236492 Jy ! Component: 600 - total flux cleaned = 0.0024231 Jy ! Component: 650 - total flux cleaned = 0.00248038 Jy ! Component: 700 - total flux cleaned = 0.00264311 Jy ! Component: 750 - total flux cleaned = 0.00269458 Jy ! Component: 800 - total flux cleaned = 0.00269328 Jy ! Component: 850 - total flux cleaned = 0.00254703 Jy ! Component: 900 - total flux cleaned = 0.00231281 Jy ! Component: 950 - total flux cleaned = 0.00235925 Jy ! Component: 1000 - total flux cleaned = 0.00231561 Jy ! Component: 1050 - total flux cleaned = 0.002231 Jy ! Component: 1100 - total flux cleaned = 0.00214658 Jy ! Component: 1150 - total flux cleaned = 0.00194018 Jy ! Component: 1200 - total flux cleaned = 0.00165845 Jy ! Component: 1250 - total flux cleaned = 0.00130566 Jy ! Component: 1300 - total flux cleaned = 0.00115287 Jy ! Component: 1350 - total flux cleaned = 0.00100247 Jy ! Component: 1400 - total flux cleaned = 0.00081861 Jy ! Component: 1450 - total flux cleaned = 0.00053034 Jy ! Component: 1500 - total flux cleaned = 0.000247815 Jy ! Component: 1550 - total flux cleaned = -3.03783e-05 Jy ! Component: 1600 - total flux cleaned = -0.000269758 Jy ! Component: 1650 - total flux cleaned = -0.000605402 Jy ! Component: 1700 - total flux cleaned = -0.000903136 Jy ! Component: 1750 - total flux cleaned = -0.00113112 Jy ! Component: 1800 - total flux cleaned = -0.0014835 Jy ! Component: 1850 - total flux cleaned = -0.00170462 Jy ! Component: 1900 - total flux cleaned = -0.0019542 Jy ! Component: 1950 - total flux cleaned = -0.00220005 Jy ! Component: 2000 - total flux cleaned = -0.0024425 Jy ! Component: 2050 - total flux cleaned = -0.0026216 Jy ! Component: 2100 - total flux cleaned = -0.00288742 Jy ! Component: 2150 - total flux cleaned = -0.0032086 Jy ! Component: 2200 - total flux cleaned = -0.00349711 Jy ! Component: 2250 - total flux cleaned = -0.00378221 Jy ! Component: 2300 - total flux cleaned = -0.00400794 Jy ! Component: 2350 - total flux cleaned = -0.00425923 Jy ! Component: 2400 - total flux cleaned = -0.00459076 Jy ! Component: 2450 - total flux cleaned = -0.00469978 Jy ! Component: 2500 - total flux cleaned = -0.00494355 Jy ! Component: 2550 - total flux cleaned = -0.00510481 Jy ! Component: 2600 - total flux cleaned = -0.005318 Jy ! Component: 2650 - total flux cleaned = -0.00545045 Jy ! Component: 2700 - total flux cleaned = -0.00558192 Jy ! Component: 2750 - total flux cleaned = -0.0057132 Jy ! Component: 2800 - total flux cleaned = -0.00576559 Jy ! Component: 2850 - total flux cleaned = -0.00584433 Jy ! Component: 2900 - total flux cleaned = -0.00592296 Jy ! Component: 2950 - total flux cleaned = -0.00602805 Jy ! Component: 3000 - total flux cleaned = -0.00608079 Jy ! Component: 3050 - total flux cleaned = -0.00616025 Jy ! Component: 3100 - total flux cleaned = -0.00618708 Jy ! Component: 3150 - total flux cleaned = -0.00626729 Jy ! Component: 3200 - total flux cleaned = -0.00626712 Jy ! Component: 3250 - total flux cleaned = -0.00629392 Jy ! Component: 3300 - total flux cleaned = -0.00632109 Jy ! Component: 3350 - total flux cleaned = -0.00637573 Jy ! Component: 3400 - total flux cleaned = -0.0063759 Jy ! Component: 3450 - total flux cleaned = -0.00637615 Jy ! Component: 3500 - total flux cleaned = -0.00643267 Jy ! Component: 3550 - total flux cleaned = -0.00651777 Jy ! Component: 3600 - total flux cleaned = -0.00654662 Jy ! Component: 3650 - total flux cleaned = -0.00657552 Jy ! Component: 3700 - total flux cleaned = -0.00660508 Jy ! Component: 3750 - total flux cleaned = -0.00663472 Jy ! Component: 3800 - total flux cleaned = -0.00663467 Jy ! Component: 3850 - total flux cleaned = -0.00666482 Jy ! Component: 3900 - total flux cleaned = -0.00669597 Jy ! Component: 3950 - total flux cleaned = -0.00669614 Jy ! Component: 4000 - total flux cleaned = -0.00669597 Jy ! Component: 4050 - total flux cleaned = -0.00666424 Jy ! Total flux subtracted in 4096 components = -0.00663133 Jy ! Clean residual min=-0.001914 max=0.001898 Jy/beam ! Clean residual mean=0.000011 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.882505 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 403 components and 0.882505 Jy ![Exited script file: muppet] wmap "J1152-0841_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.641 x 17.74 at -13.77 degrees (North through East) ! Clean map min=-0.0032971 max=0.82287 Jy/beam ! Writing clean map to FITS file: J1152-0841_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.822873 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000545565 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.1989 0.1989 0.3978 0.7956 1.5912 3.1824 6.3648 12.7296 25.4592 50.9184 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.822 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.641 x 17.74 at -13.77 degrees (North through East) ! Clean map min=-0.0032971 max=0.82287 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1152-0841_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:01:28 2019