! Started logfile: J1152+4939_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:40:35 2019 obs J1152+4939_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1152+4939_S_2017_03_27_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789683 visibilities/baseline/integration-bin. ! Found source: J1152+4939 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 11940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1152+4939_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 381 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.877099Jy sigma=0.007932 ! Fit after self-cal, rms=0.870254Jy sigma=0.007878 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=4.075 mas, bpa=-2.037 degrees ! Estimated noise=1105.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102224 Jy ! Component: 100 - total flux cleaned = 0.124517 Jy ! Total flux subtracted in 100 components = 0.124517 Jy ! Clean residual min=-0.004260 max=0.006255 Jy/beam ! Clean residual mean=-0.000002 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.124517 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.124517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083856Jy sigma=0.000678 ! Fit after self-cal, rms=0.083851Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.414 mas, bmaj=4.881 mas, bpa=-4.857 degrees ! Estimated noise=796.644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666832 Jy ! Component: 100 - total flux cleaned = 0.00943386 Jy ! Component: 150 - total flux cleaned = 0.0103249 Jy ! Component: 200 - total flux cleaned = 0.0104768 Jy ! Total flux subtracted in 200 components = 0.0104768 Jy ! Clean residual min=-0.003486 max=0.003576 Jy/beam ! Clean residual mean=0.000005 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.134994 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 32 components and 0.134994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083217Jy sigma=0.000675 ! Fit after self-cal, rms=0.083220Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.97 KP 1.04 ! LA 1.01 MK 1.10 NL 1.00 OV 1.05 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.03 KP 1.01 ! LA 1.00 MK 1.05 NL 1.04 OV 1.05 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.98 KP 1.00 ! LA 0.98 MK 1.05 NL 0.96 OV 0.96 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.96 KP 1.00* ! LA 1.01 MK 1.05 NL 1.00* OV 0.94 ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.083220Jy sigma=0.000675 ! Fit after self-cal, rms=0.082851Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.428 mas, bmaj=4.907 mas, bpa=-1.834 degrees ! Estimated noise=800.699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116131 Jy ! Component: 100 - total flux cleaned = 0.00160176 Jy ! Component: 150 - total flux cleaned = 0.00163604 Jy ! Component: 200 - total flux cleaned = 0.0016232 Jy ! Total flux subtracted in 200 components = 0.0016232 Jy ! Clean residual min=-0.003542 max=0.003425 Jy/beam ! Clean residual mean=0.000008 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.136617 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.136617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082822Jy sigma=0.000671 ! Fit after self-cal, rms=0.082825Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082825Jy sigma=0.000671 ! Fit after self-cal, rms=0.081065Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.423 mas, bmaj=4.916 mas, bpa=-0.4499 degrees ! Estimated noise=800.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216807 Jy ! Component: 100 - total flux cleaned = -0.000231896 Jy ! Component: 150 - total flux cleaned = -0.000244017 Jy ! Component: 200 - total flux cleaned = -0.000244081 Jy ! Total flux subtracted in 200 components = -0.000244081 Jy ! Clean residual min=-0.001797 max=0.001850 Jy/beam ! Clean residual mean=0.000004 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.136373 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.136373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081060Jy sigma=0.000660 ! Fit after self-cal, rms=0.081060Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09862e-05 Jy ! Component: 100 - total flux cleaned = 2.02655e-05 Jy ! Component: 150 - total flux cleaned = 1.97435e-05 Jy ! Component: 200 - total flux cleaned = 2.59324e-05 Jy ! Total flux subtracted in 200 components = 2.59324e-05 Jy ! Clean residual min=-0.001807 max=0.001842 Jy/beam ! Clean residual mean=0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.136399 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.136399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081058Jy sigma=0.000660 ! Fit after self-cal, rms=0.081058Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081058Jy sigma=0.000660 ! Fit after self-cal, rms=0.081262Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.424 mas, bmaj=4.924 mas, bpa=-0.4804 degrees ! Estimated noise=801.005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.72149e-05 Jy ! Component: 100 - total flux cleaned = -8.4997e-05 Jy ! Component: 150 - total flux cleaned = -9.24954e-05 Jy ! Component: 200 - total flux cleaned = -0.000112256 Jy ! Total flux subtracted in 200 components = -0.000112256 Jy ! Clean residual min=-0.001805 max=0.001864 Jy/beam ! Clean residual mean=0.000004 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.136287 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.136287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081260Jy sigma=0.000660 ! Fit after self-cal, rms=0.081263Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.02033e-05 Jy ! Component: 100 - total flux cleaned = -2.03817e-05 Jy ! Component: 150 - total flux cleaned = -2.52255e-05 Jy ! Component: 200 - total flux cleaned = -2.99345e-05 Jy ! Total flux subtracted in 200 components = -2.99345e-05 Jy ! Clean residual min=-0.001804 max=0.001864 Jy/beam ! Clean residual mean=0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.136257 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.136257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081262Jy sigma=0.000660 ! Fit after self-cal, rms=0.081262Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081262Jy sigma=0.000660 ! Fit after self-cal, rms=0.081373Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.227 mas, bmaj=8.712 mas, bpa=-0.5272 degrees ! Estimated noise=970.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000353839 Jy ! Component: 100 - total flux cleaned = -0.000380358 Jy ! Component: 150 - total flux cleaned = -0.00040234 Jy ! Component: 200 - total flux cleaned = -0.000421371 Jy ! Total flux subtracted in 200 components = -0.000421371 Jy ! Clean residual min=-0.001839 max=0.002142 Jy/beam ! Clean residual mean=0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.135835 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 56 components and 0.135835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081374Jy sigma=0.000660 ! Fit after self-cal, rms=0.081375Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.20009e-05 Jy ! Component: 100 - total flux cleaned = -0.000104043 Jy ! Component: 150 - total flux cleaned = -0.000114369 Jy ! Component: 200 - total flux cleaned = -0.000123181 Jy ! Total flux subtracted in 200 components = -0.000123181 Jy ! Clean residual min=-0.001824 max=0.002149 Jy/beam ! Clean residual mean=0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.135712 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.135712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081376Jy sigma=0.000660 ! Fit after self-cal, rms=0.081376Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.424 mas, bmaj=4.929 mas, bpa=-0.3527 degrees ! Estimated noise=801.623 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.424 x 4.929 at -0.3527 degrees (North through East) ! Clean map min=-0.0017524 max=0.13301 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=4.115 mas, bpa=2.616 degrees ! Estimated noise=1116.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103223 Jy ! Component: 100 - total flux cleaned = 0.125733 Jy ! Component: 150 - total flux cleaned = 0.13145 Jy ! Component: 200 - total flux cleaned = 0.134097 Jy ! Total flux subtracted in 200 components = 0.134097 Jy ! Clean residual min=-0.002840 max=0.003119 Jy/beam ! Clean residual mean=0.000002 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.134097 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.134097 Jy ! Inverting map and beam ! Estimated beam: bmin=4.424 mas, bmaj=4.929 mas, bpa=-0.3527 degrees ! Estimated noise=801.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137138 Jy ! Component: 100 - total flux cleaned = 0.00167883 Jy ! Component: 150 - total flux cleaned = 0.00185726 Jy ! Component: 200 - total flux cleaned = 0.0019773 Jy ! Total flux subtracted in 200 components = 0.0019773 Jy ! Clean residual min=-0.001832 max=0.001889 Jy/beam ! Clean residual mean=0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.136074 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.136074 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.227 mas, bmaj=8.712 mas, bpa=-0.5272 degrees ! Estimated noise=970.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285468 Jy ! Component: 100 - total flux cleaned = -0.000284902 Jy ! Component: 150 - total flux cleaned = -0.000309878 Jy ! Component: 200 - total flux cleaned = -0.000331417 Jy ! Total flux subtracted in 200 components = -0.000331417 Jy ! Clean residual min=-0.001834 max=0.002153 Jy/beam ! Clean residual mean=0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.135742 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.27229e-05 Jy ! Component: 100 - total flux cleaned = -2.99013e-05 Jy ! Component: 150 - total flux cleaned = -3.96708e-05 Jy ! Component: 200 - total flux cleaned = -4.87151e-05 Jy ! Total flux subtracted in 200 components = -4.87151e-05 Jy ! Clean residual min=-0.001827 max=0.002155 Jy/beam ! Clean residual mean=0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.135694 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.135694 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.424 mas, bmaj=4.929 mas, bpa=-0.3527 degrees ! Estimated noise=801.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179776 Jy ! Component: 100 - total flux cleaned = 0.000238605 Jy ! Component: 150 - total flux cleaned = 0.000276711 Jy ! Component: 200 - total flux cleaned = 0.000311168 Jy ! Total flux subtracted in 200 components = 0.000311168 Jy ! Clean residual min=-0.001830 max=0.001874 Jy/beam ! Clean residual mean=0.000003 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.136005 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.136005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081375Jy sigma=0.000660 ! Fit after self-cal, rms=0.081372Jy sigma=0.000660 wmodel J1152+4939_S_2017_03_27_pus_map.mod ! Writing 44 model components to file: J1152+4939_S_2017_03_27_pus_map.mod wobs J1152+4939_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1152+4939_S_2017_03_27_pus_uvs.fits wwins J1152+4939_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1152+4939_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.3848e-06 Jy ! Component: 100 - total flux cleaned = -0.000338138 Jy ! Component: 150 - total flux cleaned = -0.000520809 Jy ! Component: 200 - total flux cleaned = -0.000580165 Jy ! Component: 250 - total flux cleaned = -0.00066584 Jy ! Component: 300 - total flux cleaned = -0.000776411 Jy ! Component: 350 - total flux cleaned = -0.000777034 Jy ! Component: 400 - total flux cleaned = -0.00093745 Jy ! Component: 450 - total flux cleaned = -0.00101633 Jy ! Component: 500 - total flux cleaned = -0.00117054 Jy ! Component: 550 - total flux cleaned = -0.00122056 Jy ! Component: 600 - total flux cleaned = -0.00122047 Jy ! Component: 650 - total flux cleaned = -0.00131806 Jy ! Component: 700 - total flux cleaned = -0.00139056 Jy ! Component: 750 - total flux cleaned = -0.00146123 Jy ! Component: 800 - total flux cleaned = -0.00148413 Jy ! Component: 850 - total flux cleaned = -0.00150723 Jy ! Component: 900 - total flux cleaned = -0.00164385 Jy ! Component: 950 - total flux cleaned = -0.0016884 Jy ! Component: 1000 - total flux cleaned = -0.001755 Jy ! Component: 1050 - total flux cleaned = -0.00175548 Jy ! Component: 1100 - total flux cleaned = -0.00184237 Jy ! Component: 1150 - total flux cleaned = -0.00190642 Jy ! Component: 1200 - total flux cleaned = -0.00205403 Jy ! Component: 1250 - total flux cleaned = -0.00209546 Jy ! Component: 1300 - total flux cleaned = -0.00213685 Jy ! Component: 1350 - total flux cleaned = -0.00219807 Jy ! Component: 1400 - total flux cleaned = -0.0022588 Jy ! Component: 1450 - total flux cleaned = -0.00223891 Jy ! Component: 1500 - total flux cleaned = -0.00229801 Jy ! Component: 1550 - total flux cleaned = -0.00229829 Jy ! Component: 1600 - total flux cleaned = -0.00229814 Jy ! Component: 1650 - total flux cleaned = -0.00229831 Jy ! Component: 1700 - total flux cleaned = -0.00231756 Jy ! Component: 1750 - total flux cleaned = -0.00241207 Jy ! Component: 1800 - total flux cleaned = -0.0023743 Jy ! Component: 1850 - total flux cleaned = -0.00233716 Jy ! Component: 1900 - total flux cleaned = -0.00230027 Jy ! Component: 1950 - total flux cleaned = -0.00241 Jy ! Component: 2000 - total flux cleaned = -0.00233731 Jy ! Component: 2050 - total flux cleaned = -0.00246339 Jy ! Component: 2100 - total flux cleaned = -0.00248123 Jy ! Component: 2150 - total flux cleaned = -0.0025344 Jy ! Component: 2200 - total flux cleaned = -0.00255192 Jy ! Component: 2250 - total flux cleaned = -0.00253433 Jy ! Component: 2300 - total flux cleaned = -0.00251711 Jy ! Component: 2350 - total flux cleaned = -0.00251716 Jy ! Component: 2400 - total flux cleaned = -0.00261931 Jy ! Component: 2450 - total flux cleaned = -0.00255153 Jy ! Component: 2500 - total flux cleaned = -0.00260204 Jy ! Component: 2550 - total flux cleaned = -0.00261868 Jy ! Component: 2600 - total flux cleaned = -0.0026518 Jy ! Component: 2650 - total flux cleaned = -0.00268478 Jy ! Component: 2700 - total flux cleaned = -0.00270127 Jy ! Component: 2750 - total flux cleaned = -0.00270125 Jy ! Component: 2800 - total flux cleaned = -0.00271747 Jy ! Component: 2850 - total flux cleaned = -0.0027335 Jy ! Component: 2900 - total flux cleaned = -0.00276504 Jy ! Component: 2950 - total flux cleaned = -0.00276502 Jy ! Component: 3000 - total flux cleaned = -0.00279652 Jy ! Component: 3050 - total flux cleaned = -0.00278099 Jy ! Component: 3100 - total flux cleaned = -0.00279665 Jy ! Component: 3150 - total flux cleaned = -0.00275065 Jy ! Component: 3200 - total flux cleaned = -0.00279647 Jy ! Component: 3250 - total flux cleaned = -0.00281175 Jy ! Component: 3300 - total flux cleaned = -0.0028117 Jy ! Component: 3350 - total flux cleaned = -0.00285665 Jy ! Component: 3400 - total flux cleaned = -0.00291596 Jy ! Component: 3450 - total flux cleaned = -0.0029012 Jy ! Component: 3500 - total flux cleaned = -0.00291583 Jy ! Component: 3550 - total flux cleaned = -0.00294508 Jy ! Component: 3600 - total flux cleaned = -0.00295939 Jy ! Component: 3650 - total flux cleaned = -0.0029596 Jy ! Component: 3700 - total flux cleaned = -0.00300254 Jy ! Component: 3750 - total flux cleaned = -0.00300245 Jy ! Component: 3800 - total flux cleaned = -0.00303069 Jy ! Component: 3850 - total flux cleaned = -0.00303065 Jy ! Component: 3900 - total flux cleaned = -0.00301667 Jy ! Component: 3950 - total flux cleaned = -0.0030168 Jy ! Component: 4000 - total flux cleaned = -0.0030996 Jy ! Component: 4050 - total flux cleaned = -0.00309954 Jy ! Total flux subtracted in 4096 components = -0.00305859 Jy ! Clean residual min=-0.000894 max=0.000750 Jy/beam ! Clean residual mean=-0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.132946 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 325 components and 0.132946 Jy ![Exited script file: muppet] wmap "J1152+4939_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.424 x 4.929 at -0.3527 degrees (North through East) ! Clean map min=-0.0014341 max=0.1332 Jy/beam ! Writing clean map to FITS file: J1152+4939_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133197 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248326 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.559307 0.559307 1.11861 2.23723 4.47445 8.94891 17.8978 35.7956 71.5913 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.424 x 4.929 at -0.3527 degrees (North through East) ! Clean map min=-0.0014341 max=0.1332 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1152+4939_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:40:40 2019