! Started logfile: J1151-1723_X_2017_06_10_pus_uvs.log on Mon May 6 12:45:58 2019 obs J1151-1723_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1151-1723_X_2017_06_10_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.788596 visibilities/baseline/integration-bin. ! Found source: J1151-1723 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 32364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1151-1723_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894555Jy sigma=0.007458 ! Fit after self-cal, rms=0.873014Jy sigma=0.007287 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.826 mas, bmaj=1.659 mas, bpa=3.282 degrees ! Estimated noise=816.733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0962326 Jy ! Component: 100 - total flux cleaned = 0.135294 Jy ! Total flux subtracted in 100 components = 0.135294 Jy ! Clean residual min=-0.013237 max=0.027808 Jy/beam ! Clean residual mean=0.000299 rms=0.004579 Jy/beam ! Combined flux in latest and established models = 0.135294 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.135294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111342Jy sigma=0.000910 ! Fit after self-cal, rms=0.110905Jy sigma=0.000906 ! Inverting map ! Added new window around map position (4.8, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295307 Jy ! Component: 100 - total flux cleaned = 0.0499934 Jy ! Total flux subtracted in 100 components = 0.0499934 Jy ! Clean residual min=-0.008712 max=0.016577 Jy/beam ! Clean residual mean=0.000231 rms=0.003256 Jy/beam ! Combined flux in latest and established models = 0.185288 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.185288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099260Jy sigma=0.000801 ! Fit after self-cal, rms=0.098904Jy sigma=0.000797 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9847 mas, bmaj=1.994 mas, bpa=4.272 degrees ! Estimated noise=476.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241495 Jy ! Component: 100 - total flux cleaned = 0.0407365 Jy ! Component: 150 - total flux cleaned = 0.052761 Jy ! Component: 200 - total flux cleaned = 0.0617712 Jy ! Total flux subtracted in 200 components = 0.0617712 Jy ! Clean residual min=-0.007422 max=0.019451 Jy/beam ! Clean residual mean=0.000151 rms=0.003078 Jy/beam ! Combined flux in latest and established models = 0.247059 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 0.247059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091536Jy sigma=0.000730 ! Fit after self-cal, rms=0.091334Jy sigma=0.000728 ! Inverting map ! Added new window around map position (8.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181653 Jy ! Component: 100 - total flux cleaned = 0.0280695 Jy ! Component: 150 - total flux cleaned = 0.0356822 Jy ! Component: 200 - total flux cleaned = 0.0418132 Jy ! Total flux subtracted in 200 components = 0.0418132 Jy ! Clean residual min=-0.005561 max=0.007676 Jy/beam ! Clean residual mean=0.000087 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.288872 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 0.288872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087462Jy sigma=0.000691 ! Fit after self-cal, rms=0.087247Jy sigma=0.000689 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.38 KP 1.00 ! LA 0.92 MK 1.04 NL 0.97 OV 0.97 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.33 KP 0.95 ! LA 0.92 MK 1.09 NL 0.97 OV 0.99 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.32 KP 0.96 ! LA 0.95 MK 1.06 NL 0.99 OV 0.99 ! PT 0.94 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 1.37 KP 0.97 ! LA 0.99 MK 0.99 NL 0.96 OV 0.99 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.30 KP 0.95 ! LA 0.96 MK 1.06 NL 0.97 OV 1.00 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.28 KP 0.95 ! LA 0.93 MK 1.13 NL 0.98 OV 0.96 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 1.26 KP 0.95 ! LA 0.97 MK 1.09 NL 0.99 OV 1.01 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 1.28 KP 0.93 ! LA 0.95 MK 1.12 NL 0.97 OV 0.99 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.29 KP 0.95 ! LA 0.95 MK 1.04 NL 0.98 OV 0.94 ! PT 0.97 SC 0.90 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.23 KP 0.98 ! LA 0.97 MK 1.05 NL 0.99 OV 0.94 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.33 KP 0.97 ! LA 0.98 MK 1.10 NL 0.95 OV 0.93 ! PT 0.99 SC 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.19 KP 0.92 ! LA 0.95 MK 1.00* NL 0.97 OV 1.01 ! PT 0.97 SC 0.88 ! ! ! Fit before self-cal, rms=0.087247Jy sigma=0.000689 ! Fit after self-cal, rms=0.089396Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9968 mas, bmaj=2.033 mas, bpa=6.648 degrees ! Estimated noise=467.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036138 Jy ! Component: 100 - total flux cleaned = 0.0047486 Jy ! Component: 150 - total flux cleaned = 0.00558941 Jy ! Component: 200 - total flux cleaned = 0.00642011 Jy ! Total flux subtracted in 200 components = 0.00642011 Jy ! Clean residual min=-0.003657 max=0.004099 Jy/beam ! Clean residual mean=0.000031 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.295292 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.295292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088987Jy sigma=0.000671 ! Fit after self-cal, rms=0.089112Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089112Jy sigma=0.000670 ! Fit after self-cal, rms=0.088455Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9906 mas, bmaj=2.021 mas, bpa=6.145 degrees ! Estimated noise=462.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223686 Jy ! Component: 100 - total flux cleaned = 0.00284663 Jy ! Component: 150 - total flux cleaned = 0.00309936 Jy ! Component: 200 - total flux cleaned = 0.00332533 Jy ! Total flux subtracted in 200 components = 0.00332533 Jy ! Clean residual min=-0.002274 max=0.003350 Jy/beam ! Clean residual mean=0.000008 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.298618 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 110 components and 0.298618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088333Jy sigma=0.000664 ! Fit after self-cal, rms=0.088397Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179201 Jy ! Component: 100 - total flux cleaned = 0.00139669 Jy ! Component: 150 - total flux cleaned = 0.00134036 Jy ! Component: 200 - total flux cleaned = 0.00128804 Jy ! Total flux subtracted in 200 components = 0.00128804 Jy ! Clean residual min=-0.002040 max=0.002205 Jy/beam ! Clean residual mean=0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.299906 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 130 components and 0.299906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088264Jy sigma=0.000662 ! Fit after self-cal, rms=0.088246Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088246Jy sigma=0.000662 ! Fit after self-cal, rms=0.087902Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9901 mas, bmaj=2.018 mas, bpa=5.937 degrees ! Estimated noise=461.354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457835 Jy ! Component: 100 - total flux cleaned = 0.000507632 Jy ! Component: 150 - total flux cleaned = 0.000421659 Jy ! Component: 200 - total flux cleaned = 0.000382181 Jy ! Total flux subtracted in 200 components = 0.000382181 Jy ! Clean residual min=-0.001986 max=0.002384 Jy/beam ! Clean residual mean=0.000010 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.300288 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.300288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087847Jy sigma=0.000662 ! Fit after self-cal, rms=0.087840Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145366 Jy ! Component: 100 - total flux cleaned = 0.00183054 Jy ! Component: 150 - total flux cleaned = 0.00206151 Jy ! Component: 200 - total flux cleaned = 0.00218983 Jy ! Total flux subtracted in 200 components = 0.00218983 Jy ! Clean residual min=-0.001665 max=0.001743 Jy/beam ! Clean residual mean=0.000009 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.302478 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.302478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087760Jy sigma=0.000661 ! Fit after self-cal, rms=0.087747Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087747Jy sigma=0.000661 ! Fit after self-cal, rms=0.087395Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.183 mas, bmaj=4.031 mas, bpa=2.322 degrees ! Estimated noise=559.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015107 Jy ! Component: 100 - total flux cleaned = 0.00187631 Jy ! Component: 150 - total flux cleaned = 0.00182252 Jy ! Component: 200 - total flux cleaned = 0.00179703 Jy ! Total flux subtracted in 200 components = 0.00179703 Jy ! Clean residual min=-0.001453 max=0.001741 Jy/beam ! Clean residual mean=0.000014 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.304275 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 168 components and 0.304275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087375Jy sigma=0.000661 ! Fit after self-cal, rms=0.087371Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513499 Jy ! Component: 100 - total flux cleaned = 0.000540473 Jy ! Component: 150 - total flux cleaned = 0.000517856 Jy ! Component: 200 - total flux cleaned = 0.000476535 Jy ! Total flux subtracted in 200 components = 0.000476535 Jy ! Clean residual min=-0.001487 max=0.001686 Jy/beam ! Clean residual mean=0.000011 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.304751 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 179 components and 0.304751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087364Jy sigma=0.000661 ! Fit after self-cal, rms=0.087361Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9883 mas, bmaj=2.016 mas, bpa=6.012 degrees ! Estimated noise=459.643 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9883 x 2.016 at 6.012 degrees (North through East) ! Clean map min=-0.002309 max=0.12826 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8258 mas, bmaj=1.674 mas, bpa=5.417 degrees ! Estimated noise=788.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0930681 Jy ! Component: 100 - total flux cleaned = 0.134295 Jy ! Component: 150 - total flux cleaned = 0.16276 Jy ! Component: 200 - total flux cleaned = 0.184142 Jy ! Total flux subtracted in 200 components = 0.184142 Jy ! Clean residual min=-0.007163 max=0.012610 Jy/beam ! Clean residual mean=0.000196 rms=0.002748 Jy/beam ! Combined flux in latest and established models = 0.184142 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.184142 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9883 mas, bmaj=2.016 mas, bpa=6.012 degrees ! Estimated noise=459.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244399 Jy ! Component: 100 - total flux cleaned = 0.042739 Jy ! Component: 150 - total flux cleaned = 0.0568748 Jy ! Component: 200 - total flux cleaned = 0.0680141 Jy ! Total flux subtracted in 200 components = 0.0680141 Jy ! Clean residual min=-0.004429 max=0.006698 Jy/beam ! Clean residual mean=0.000094 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.252156 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 56 components and 0.252156 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.183 mas, bmaj=4.031 mas, bpa=2.322 degrees ! Estimated noise=559.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146904 Jy ! Component: 100 - total flux cleaned = 0.0244612 Jy ! Component: 150 - total flux cleaned = 0.0312983 Jy ! Component: 200 - total flux cleaned = 0.0362005 Jy ! Total flux subtracted in 200 components = 0.0362005 Jy ! Clean residual min=-0.002370 max=0.003320 Jy/beam ! Clean residual mean=0.000068 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.288357 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357229 Jy ! Component: 100 - total flux cleaned = 0.00625227 Jy ! Component: 150 - total flux cleaned = 0.00830665 Jy ! Component: 200 - total flux cleaned = 0.00991006 Jy ! Total flux subtracted in 200 components = 0.00991006 Jy ! Clean residual min=-0.001735 max=0.001989 Jy/beam ! Clean residual mean=0.000033 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.298267 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 150 components and 0.298267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9883 mas, bmaj=2.016 mas, bpa=6.012 degrees ! Estimated noise=459.643 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643767 Jy ! Component: 100 - total flux cleaned = 0.0011942 Jy ! Component: 150 - total flux cleaned = 0.00167035 Jy ! Component: 200 - total flux cleaned = 0.00197848 Jy ! Total flux subtracted in 200 components = 0.00197848 Jy ! Clean residual min=-0.001876 max=0.002396 Jy/beam ! Clean residual mean=0.000015 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.300245 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 167 components and 0.300245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087425Jy sigma=0.000661 ! Fit after self-cal, rms=0.087376Jy sigma=0.000661 wmodel J1151-1723_X_2017_06_10_pus_map.mod ! Writing 167 model components to file: J1151-1723_X_2017_06_10_pus_map.mod wobs J1151-1723_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1151-1723_X_2017_06_10_pus_uvs.fits wwins J1151-1723_X_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J1151-1723_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000771235 Jy ! Component: 100 - total flux cleaned = 0.000892515 Jy ! Component: 150 - total flux cleaned = 0.00114496 Jy ! Component: 200 - total flux cleaned = 0.00138117 Jy ! Component: 250 - total flux cleaned = 0.00150585 Jy ! Component: 300 - total flux cleaned = 0.001647 Jy ! Component: 350 - total flux cleaned = 0.00171461 Jy ! Component: 400 - total flux cleaned = 0.00182359 Jy ! Component: 450 - total flux cleaned = 0.00190753 Jy ! Component: 500 - total flux cleaned = 0.00196856 Jy ! Component: 550 - total flux cleaned = 0.00204718 Jy ! Component: 600 - total flux cleaned = 0.00206614 Jy ! Component: 650 - total flux cleaned = 0.00206581 Jy ! Component: 700 - total flux cleaned = 0.00210234 Jy ! Component: 750 - total flux cleaned = 0.00213803 Jy ! Component: 800 - total flux cleaned = 0.00217291 Jy ! Component: 850 - total flux cleaned = 0.0022413 Jy ! Component: 900 - total flux cleaned = 0.0022913 Jy ! Component: 950 - total flux cleaned = 0.0023245 Jy ! Component: 1000 - total flux cleaned = 0.00240522 Jy ! Component: 1050 - total flux cleaned = 0.00249995 Jy ! Component: 1100 - total flux cleaned = 0.00254615 Jy ! Component: 1150 - total flux cleaned = 0.00260716 Jy ! Component: 1200 - total flux cleaned = 0.00269682 Jy ! Component: 1250 - total flux cleaned = 0.00278501 Jy ! Component: 1300 - total flux cleaned = 0.00282827 Jy ! Component: 1350 - total flux cleaned = 0.0028996 Jy ! Component: 1400 - total flux cleaned = 0.00299777 Jy ! Component: 1450 - total flux cleaned = 0.00306635 Jy ! Component: 1500 - total flux cleaned = 0.00308008 Jy ! Component: 1550 - total flux cleaned = 0.00317379 Jy ! Component: 1600 - total flux cleaned = 0.00321326 Jy ! Component: 1650 - total flux cleaned = 0.00326506 Jy ! Component: 1700 - total flux cleaned = 0.00331617 Jy ! Component: 1750 - total flux cleaned = 0.00332858 Jy ! Component: 1800 - total flux cleaned = 0.00339081 Jy ! Component: 1850 - total flux cleaned = 0.00341531 Jy ! Component: 1900 - total flux cleaned = 0.0034881 Jy ! Component: 1950 - total flux cleaned = 0.0035479 Jy ! Component: 2000 - total flux cleaned = 0.00359515 Jy ! Total flux subtracted in 2048 components = 0.00361858 Jy ! Clean residual min=-0.000682 max=0.000608 Jy/beam ! Clean residual mean=0.000005 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.303864 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 307 components and 0.303864 Jy ![Exited script file: muppet] wmap "J1151-1723_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9883 x 2.016 at 6.012 degrees (North through East) ! Clean map min=-0.0014003 max=0.13033 Jy/beam ! Writing clean map to FITS file: J1151-1723_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.130328 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212416 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.488957 0.488957 0.977913 1.95583 3.91165 7.82331 15.6466 31.2932 62.5864 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.13 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9883 x 2.016 at 6.012 degrees (North through East) ! Clean map min=-0.0014003 max=0.13033 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1151-1723_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:46:01 2019