! Started logfile: J1150-1930_S_2017_06_10_pus_uvs.log on Mon May 6 14:52:12 2019 obs J1150-1930_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1150-1930_S_2017_06_10_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.528 visibilities/baseline/integration-bin. ! Found source: J1150-1930 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 7128 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1150-1930_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 645 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.775746Jy sigma=0.006101 ! Fit after self-cal, rms=0.711226Jy sigma=0.005594 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=9.647 mas, bpa=14.55 degrees ! Estimated noise=1832.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.227986 Jy ! Component: 100 - total flux cleaned = 0.278879 Jy ! Total flux subtracted in 100 components = 0.278879 Jy ! Clean residual min=-0.016073 max=0.026816 Jy/beam ! Clean residual mean=-0.000033 rms=0.004680 Jy/beam ! Combined flux in latest and established models = 0.278879 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.278879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106255Jy sigma=0.000807 ! Fit after self-cal, rms=0.106227Jy sigma=0.000806 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=10.99 mas, bpa=12.62 degrees ! Estimated noise=1222.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030787 Jy ! Component: 100 - total flux cleaned = 0.0485281 Jy ! Component: 150 - total flux cleaned = 0.060207 Jy ! Component: 200 - total flux cleaned = 0.0686297 Jy ! Total flux subtracted in 200 components = 0.0686297 Jy ! Clean residual min=-0.010505 max=0.013245 Jy/beam ! Clean residual mean=-0.000002 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.347508 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 50 components and 0.347508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096240Jy sigma=0.000725 ! Fit after self-cal, rms=0.095659Jy sigma=0.000721 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.17 KP 1.03 ! LA 1.01 MK 1.00* NL 0.88 OV 1.01 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.04 KP 0.99 ! LA 0.97 MK 1.00* NL 1.03 OV 1.03 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.14 KP 0.98 ! LA 0.98 MK 1.00* NL 1.00 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.095659Jy sigma=0.000721 ! Fit after self-cal, rms=0.093590Jy sigma=0.000700 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.048 mas, bmaj=11.26 mas, bpa=13.6 degrees ! Estimated noise=1219.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102458 Jy ! Component: 100 - total flux cleaned = 0.000769371 Jy ! Component: 150 - total flux cleaned = 0.00058146 Jy ! Component: 200 - total flux cleaned = 0.000269591 Jy ! Total flux subtracted in 200 components = 0.000269591 Jy ! Clean residual min=-0.007638 max=0.009164 Jy/beam ! Clean residual mean=0.000017 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 0.347778 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.347778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092278Jy sigma=0.000693 ! Fit after self-cal, rms=0.092251Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092251Jy sigma=0.000692 ! Fit after self-cal, rms=0.092900Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=11.19 mas, bpa=13.14 degrees ! Estimated noise=1219.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027213 Jy ! Component: 100 - total flux cleaned = 0.00311195 Jy ! Component: 150 - total flux cleaned = 0.00321703 Jy ! Component: 200 - total flux cleaned = 0.00339349 Jy ! Total flux subtracted in 200 components = 0.00339349 Jy ! Clean residual min=-0.004238 max=0.003974 Jy/beam ! Clean residual mean=-0.000006 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.351171 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.351171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092565Jy sigma=0.000666 ! Fit after self-cal, rms=0.092675Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004984 Jy ! Component: 100 - total flux cleaned = 0.000570643 Jy ! Component: 150 - total flux cleaned = 0.000637815 Jy ! Component: 200 - total flux cleaned = 0.000760985 Jy ! Total flux subtracted in 200 components = 0.000760985 Jy ! Clean residual min=-0.003919 max=0.003692 Jy/beam ! Clean residual mean=-0.000006 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.351932 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 0.351932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092567Jy sigma=0.000665 ! Fit after self-cal, rms=0.092557Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092557Jy sigma=0.000665 ! Fit after self-cal, rms=0.092905Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=11.18 mas, bpa=13.08 degrees ! Estimated noise=1215.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448134 Jy ! Component: 100 - total flux cleaned = 0.000589165 Jy ! Component: 150 - total flux cleaned = 0.000711753 Jy ! Component: 200 - total flux cleaned = 0.000820047 Jy ! Total flux subtracted in 200 components = 0.000820047 Jy ! Clean residual min=-0.003604 max=0.003098 Jy/beam ! Clean residual mean=-0.000006 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.352753 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 116 components and 0.352753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092809Jy sigma=0.000664 ! Fit after self-cal, rms=0.092816Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173297 Jy ! Component: 100 - total flux cleaned = 0.000268944 Jy ! Component: 150 - total flux cleaned = 0.000356493 Jy ! Component: 200 - total flux cleaned = 0.000396248 Jy ! Total flux subtracted in 200 components = 0.000396248 Jy ! Clean residual min=-0.003434 max=0.002997 Jy/beam ! Clean residual mean=-0.000006 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.353149 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 126 components and 0.353149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092769Jy sigma=0.000664 ! Fit after self-cal, rms=0.092764Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092764Jy sigma=0.000664 ! Fit after self-cal, rms=0.092982Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.653 mas, bmaj=17.11 mas, bpa=0.7911 degrees ! Estimated noise=1421.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.33897e-05 Jy ! Component: 100 - total flux cleaned = 2.78252e-05 Jy ! Component: 150 - total flux cleaned = -4.62691e-05 Jy ! Component: 200 - total flux cleaned = -0.000114776 Jy ! Total flux subtracted in 200 components = -0.000114776 Jy ! Clean residual min=-0.004166 max=0.003432 Jy/beam ! Clean residual mean=-0.000012 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.353034 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 140 components and 0.353034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092960Jy sigma=0.000664 ! Fit after self-cal, rms=0.092965Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118891 Jy ! Component: 100 - total flux cleaned = -0.000179502 Jy ! Component: 150 - total flux cleaned = -0.000236808 Jy ! Component: 200 - total flux cleaned = -0.000273577 Jy ! Total flux subtracted in 200 components = -0.000273577 Jy ! Clean residual min=-0.004105 max=0.003388 Jy/beam ! Clean residual mean=-0.000011 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.35276 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 152 components and 0.35276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092950Jy sigma=0.000664 ! Fit after self-cal, rms=0.092950Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=11.16 mas, bpa=13.05 degrees ! Estimated noise=1213.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.046 x 11.16 at 13.05 degrees (North through East) ! Clean map min=-0.0032168 max=0.27761 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=9.818 mas, bpa=14.81 degrees ! Estimated noise=1828.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225472 Jy ! Component: 100 - total flux cleaned = 0.278612 Jy ! Component: 150 - total flux cleaned = 0.301581 Jy ! Component: 200 - total flux cleaned = 0.31483 Jy ! Total flux subtracted in 200 components = 0.31483 Jy ! Clean residual min=-0.005719 max=0.007551 Jy/beam ! Clean residual mean=-0.000024 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 0.31483 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.31483 Jy ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=11.16 mas, bpa=13.05 degrees ! Estimated noise=1213.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111966 Jy ! Component: 100 - total flux cleaned = 0.018295 Jy ! Component: 150 - total flux cleaned = 0.0232074 Jy ! Component: 200 - total flux cleaned = 0.0267358 Jy ! Total flux subtracted in 200 components = 0.0267358 Jy ! Clean residual min=-0.003563 max=0.003534 Jy/beam ! Clean residual mean=-0.000014 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.341566 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 83 components and 0.341566 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.653 mas, bmaj=17.11 mas, bpa=0.7911 degrees ! Estimated noise=1421.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347399 Jy ! Component: 100 - total flux cleaned = 0.00557021 Jy ! Component: 150 - total flux cleaned = 0.00691123 Jy ! Component: 200 - total flux cleaned = 0.00722272 Jy ! Total flux subtracted in 200 components = 0.00722272 Jy ! Clean residual min=-0.004083 max=0.003544 Jy/beam ! Clean residual mean=-0.000016 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.348788 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223289 Jy ! Component: 100 - total flux cleaned = 0.000359157 Jy ! Component: 150 - total flux cleaned = 0.000480318 Jy ! Component: 200 - total flux cleaned = 0.000568532 Jy ! Total flux subtracted in 200 components = 0.000568532 Jy ! Clean residual min=-0.004012 max=0.003557 Jy/beam ! Clean residual mean=-0.000015 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.349357 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 124 components and 0.349357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=11.16 mas, bpa=13.05 degrees ! Estimated noise=1213.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155519 Jy ! Component: 100 - total flux cleaned = 1.95097e-05 Jy ! Component: 150 - total flux cleaned = 0.000204482 Jy ! Component: 200 - total flux cleaned = 0.000206742 Jy ! Total flux subtracted in 200 components = 0.000206742 Jy ! Clean residual min=-0.003338 max=0.003111 Jy/beam ! Clean residual mean=-0.000008 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.349564 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 136 components and 0.349564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092919Jy sigma=0.000663 ! Fit after self-cal, rms=0.092907Jy sigma=0.000663 wmodel J1150-1930_S_2017_06_10_pus_map.mod ! Writing 136 model components to file: J1150-1930_S_2017_06_10_pus_map.mod wobs J1150-1930_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1150-1930_S_2017_06_10_pus_uvs.fits wwins J1150-1930_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J1150-1930_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314804 Jy ! Component: 100 - total flux cleaned = -0.000614158 Jy ! Component: 150 - total flux cleaned = -0.00103506 Jy ! Component: 200 - total flux cleaned = -0.00143075 Jy ! Component: 250 - total flux cleaned = -0.00159774 Jy ! Component: 300 - total flux cleaned = -0.00195806 Jy ! Component: 350 - total flux cleaned = -0.00207324 Jy ! Component: 400 - total flux cleaned = -0.00233184 Jy ! Component: 450 - total flux cleaned = -0.00247406 Jy ! Component: 500 - total flux cleaned = -0.00264783 Jy ! Component: 550 - total flux cleaned = -0.00291568 Jy ! Component: 600 - total flux cleaned = -0.00314326 Jy ! Component: 650 - total flux cleaned = -0.0033011 Jy ! Component: 700 - total flux cleaned = -0.00348565 Jy ! Component: 750 - total flux cleaned = -0.00360454 Jy ! Component: 800 - total flux cleaned = -0.00366127 Jy ! Component: 850 - total flux cleaned = -0.00363203 Jy ! Component: 900 - total flux cleaned = -0.00365948 Jy ! Component: 950 - total flux cleaned = -0.00371305 Jy ! Component: 1000 - total flux cleaned = -0.0037652 Jy ! Component: 1050 - total flux cleaned = -0.00384148 Jy ! Component: 1100 - total flux cleaned = -0.00391627 Jy ! Component: 1150 - total flux cleaned = -0.00398924 Jy ! Component: 1200 - total flux cleaned = -0.00401278 Jy ! Component: 1250 - total flux cleaned = -0.00405889 Jy ! Component: 1300 - total flux cleaned = -0.00410373 Jy ! Component: 1350 - total flux cleaned = -0.00414829 Jy ! Component: 1400 - total flux cleaned = -0.00412699 Jy ! Component: 1450 - total flux cleaned = -0.00414854 Jy ! Component: 1500 - total flux cleaned = -0.00414834 Jy ! Component: 1550 - total flux cleaned = -0.00425074 Jy ! Component: 1600 - total flux cleaned = -0.00425063 Jy ! Component: 1650 - total flux cleaned = -0.00429028 Jy ! Component: 1700 - total flux cleaned = -0.00431018 Jy ! Component: 1750 - total flux cleaned = -0.0043867 Jy ! Component: 1800 - total flux cleaned = -0.0044242 Jy ! Component: 1850 - total flux cleaned = -0.00451624 Jy ! Component: 1900 - total flux cleaned = -0.00455266 Jy ! Component: 1950 - total flux cleaned = -0.00462453 Jy ! Component: 2000 - total flux cleaned = -0.00471289 Jy ! Component: 2050 - total flux cleaned = -0.00473052 Jy ! Component: 2100 - total flux cleaned = -0.00483384 Jy ! Component: 2150 - total flux cleaned = -0.00486777 Jy ! Component: 2200 - total flux cleaned = -0.00488456 Jy ! Component: 2250 - total flux cleaned = -0.00493462 Jy ! Component: 2300 - total flux cleaned = -0.00500037 Jy ! Component: 2350 - total flux cleaned = -0.00504903 Jy ! Component: 2400 - total flux cleaned = -0.00506533 Jy ! Component: 2450 - total flux cleaned = -0.00517717 Jy ! Component: 2500 - total flux cleaned = -0.00522453 Jy ! Component: 2550 - total flux cleaned = -0.00528724 Jy ! Component: 2600 - total flux cleaned = -0.0053339 Jy ! Component: 2650 - total flux cleaned = -0.0053955 Jy ! Component: 2700 - total flux cleaned = -0.00545665 Jy ! Component: 2750 - total flux cleaned = -0.0055173 Jy ! Component: 2800 - total flux cleaned = -0.00563737 Jy ! Component: 2850 - total flux cleaned = -0.00566713 Jy ! Component: 2900 - total flux cleaned = -0.00574103 Jy ! Component: 2950 - total flux cleaned = -0.00578503 Jy ! Component: 3000 - total flux cleaned = -0.00585792 Jy ! Component: 3050 - total flux cleaned = -0.00587241 Jy ! Component: 3100 - total flux cleaned = -0.00587232 Jy ! Component: 3150 - total flux cleaned = -0.00585802 Jy ! Component: 3200 - total flux cleaned = -0.00585792 Jy ! Component: 3250 - total flux cleaned = -0.00581546 Jy ! Component: 3300 - total flux cleaned = -0.00582953 Jy ! Component: 3350 - total flux cleaned = -0.0058296 Jy ! Component: 3400 - total flux cleaned = -0.0057877 Jy ! Component: 3450 - total flux cleaned = -0.00577384 Jy ! Component: 3500 - total flux cleaned = -0.00577383 Jy ! Component: 3550 - total flux cleaned = -0.0057325 Jy ! Component: 3600 - total flux cleaned = -0.00573257 Jy ! Component: 3650 - total flux cleaned = -0.00569158 Jy ! Component: 3700 - total flux cleaned = -0.00567795 Jy ! Component: 3750 - total flux cleaned = -0.00563717 Jy ! Component: 3800 - total flux cleaned = -0.00558295 Jy ! Component: 3850 - total flux cleaned = -0.00552898 Jy ! Component: 3900 - total flux cleaned = -0.00551556 Jy ! Component: 3950 - total flux cleaned = -0.00546188 Jy ! Component: 4000 - total flux cleaned = -0.00543511 Jy ! Component: 4050 - total flux cleaned = -0.00540844 Jy ! Total flux subtracted in 4096 components = -0.00539514 Jy ! Clean residual min=-0.000759 max=0.000816 Jy/beam ! Clean residual mean=0.000000 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.344168 Jy keep ! Adding 327 model components to the UV plane model. ! The established model now contains 463 components and 0.344168 Jy ![Exited script file: muppet] wmap "J1150-1930_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.046 x 11.16 at 13.05 degrees (North through East) ! Clean map min=-0.0021549 max=0.2819 Jy/beam ! Writing clean map to FITS file: J1150-1930_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.281896 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00024005 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.255467 0.255467 0.510933 1.02187 2.04373 4.08747 8.17494 16.3499 32.6997 65.3995 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.281 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.046 x 11.16 at 13.05 degrees (North through East) ! Clean map min=-0.0021549 max=0.2819 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1150-1930_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:52:17 2019