! Started logfile: J1150+2417_S_2017_05_27_pus_uvs.log on Fri May 3 11:05:23 2019 obs J1150+2417_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1150+2417_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877778 visibilities/baseline/integration-bin. ! Found source: J1150+2417 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 1264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1150+2417_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.539319Jy sigma=0.005100 ! Fit after self-cal, rms=0.537001Jy sigma=0.005080 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.589 mas, bmaj=7.783 mas, bpa=-9.888 degrees ! Estimated noise=2857.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.356439 Jy ! Component: 100 - total flux cleaned = 0.453764 Jy ! Total flux subtracted in 100 components = 0.453764 Jy ! Clean residual min=-0.023414 max=0.041976 Jy/beam ! Clean residual mean=0.000103 rms=0.007413 Jy/beam ! Combined flux in latest and established models = 0.453764 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.453764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140333Jy sigma=0.001208 ! Fit after self-cal, rms=0.140138Jy sigma=0.001206 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=8.271 mas, bpa=-8.614 degrees ! Estimated noise=2373.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580986 Jy ! Component: 100 - total flux cleaned = 0.0847496 Jy ! Component: 150 - total flux cleaned = 0.0982192 Jy ! Component: 200 - total flux cleaned = 0.103102 Jy ! Total flux subtracted in 200 components = 0.103102 Jy ! Clean residual min=-0.025234 max=0.030644 Jy/beam ! Clean residual mean=0.000094 rms=0.006987 Jy/beam ! Combined flux in latest and established models = 0.556866 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 32 components and 0.556866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113535Jy sigma=0.000982 ! Fit after self-cal, rms=0.113468Jy sigma=0.000980 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.00 KP 1.05 ! LA 0.96 MK 0.94 NL 0.89 OV 1.05 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.99 HN 1.05 KP 1.01 ! LA 0.90 MK 0.95 NL 1.05 OV 1.06 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 1.05 KP 1.04 ! LA 0.97 MK 0.96 NL 1.09 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.03 KP 1.00* ! LA 0.70 MK 1.51 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.113468Jy sigma=0.000980 ! Fit after self-cal, rms=0.093049Jy sigma=0.000857 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=8.215 mas, bpa=-8.453 degrees ! Estimated noise=2355.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600936 Jy ! Component: 100 - total flux cleaned = 0.000478608 Jy ! Component: 150 - total flux cleaned = 0.00048248 Jy ! Component: 200 - total flux cleaned = 0.000381605 Jy ! Total flux subtracted in 200 components = 0.000381605 Jy ! Clean residual min=-0.014990 max=0.027158 Jy/beam ! Clean residual mean=0.000054 rms=0.005618 Jy/beam ! Combined flux in latest and established models = 0.557248 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.557248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092720Jy sigma=0.000854 ! Fit after self-cal, rms=0.092639Jy sigma=0.000854 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092639Jy sigma=0.000854 ! Fit after self-cal, rms=0.092525Jy sigma=0.000854 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=8.205 mas, bpa=-8.335 degrees ! Estimated noise=2356.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00066318 Jy ! Component: 100 - total flux cleaned = 0.000552686 Jy ! Component: 150 - total flux cleaned = 0.0004549 Jy ! Component: 200 - total flux cleaned = 0.000364582 Jy ! Total flux subtracted in 200 components = 0.000364582 Jy ! Clean residual min=-0.014376 max=0.026798 Jy/beam ! Clean residual mean=0.000054 rms=0.005572 Jy/beam ! Combined flux in latest and established models = 0.557612 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.557612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092297Jy sigma=0.000852 ! Fit after self-cal, rms=0.092295Jy sigma=0.000852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (51.5, -69.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257677 Jy ! Component: 100 - total flux cleaned = 0.0395017 Jy ! Component: 150 - total flux cleaned = 0.0464143 Jy ! Component: 200 - total flux cleaned = 0.0499996 Jy ! Total flux subtracted in 200 components = 0.0499996 Jy ! Clean residual min=-0.011358 max=0.017210 Jy/beam ! Clean residual mean=0.000026 rms=0.003832 Jy/beam ! Combined flux in latest and established models = 0.607612 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 81 components and 0.607612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085457Jy sigma=0.000771 ! Fit after self-cal, rms=0.084984Jy sigma=0.000768 ! Inverting map ! Added new window around map position (-127.5, 102.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146602 Jy ! Component: 100 - total flux cleaned = 0.0187323 Jy ! Component: 150 - total flux cleaned = 0.022315 Jy ! Component: 200 - total flux cleaned = 0.0256155 Jy ! Total flux subtracted in 200 components = 0.0256155 Jy ! Clean residual min=-0.010539 max=0.010941 Jy/beam ! Clean residual mean=0.000009 rms=0.003137 Jy/beam ! Combined flux in latest and established models = 0.633227 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 121 components and 0.633227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082298Jy sigma=0.000737 ! Fit after self-cal, rms=0.082134Jy sigma=0.000736 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082134Jy sigma=0.000736 ! Fit after self-cal, rms=0.080689Jy sigma=0.000730 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=8.192 mas, bpa=-8.227 degrees ! Estimated noise=2340.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564192 Jy ! Component: 100 - total flux cleaned = 0.00813432 Jy ! Component: 150 - total flux cleaned = 0.00925681 Jy ! Component: 200 - total flux cleaned = 0.0101253 Jy ! Total flux subtracted in 200 components = 0.0101253 Jy ! Clean residual min=-0.009103 max=0.011489 Jy/beam ! Clean residual mean=0.000002 rms=0.002812 Jy/beam ! Combined flux in latest and established models = 0.643352 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 144 components and 0.643352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080167Jy sigma=0.000723 ! Fit after self-cal, rms=0.080103Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151976 Jy ! Component: 100 - total flux cleaned = 0.00173831 Jy ! Component: 150 - total flux cleaned = 0.00213033 Jy ! Component: 200 - total flux cleaned = 0.00222393 Jy ! Total flux subtracted in 200 components = 0.00222393 Jy ! Clean residual min=-0.009019 max=0.011642 Jy/beam ! Clean residual mean=0.000002 rms=0.002740 Jy/beam ! Combined flux in latest and established models = 0.645576 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 156 components and 0.645576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079892Jy sigma=0.000720 ! Fit after self-cal, rms=0.079864Jy sigma=0.000720 ! Inverting map ! Added new window around map position (-6, -43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111264 Jy ! Component: 100 - total flux cleaned = 0.0173241 Jy ! Component: 150 - total flux cleaned = 0.0216094 Jy ! Component: 200 - total flux cleaned = 0.0240162 Jy ! Total flux subtracted in 200 components = 0.0240162 Jy ! Clean residual min=-0.007765 max=0.008841 Jy/beam ! Clean residual mean=0.000009 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 0.669593 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 182 components and 0.669593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078208Jy sigma=0.000703 ! Fit after self-cal, rms=0.078148Jy sigma=0.000702 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078148Jy sigma=0.000702 ! Fit after self-cal, rms=0.077963Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.444 mas, bmaj=10.65 mas, bpa=-6.318 degrees ! Estimated noise=2857.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702796 Jy ! Component: 100 - total flux cleaned = 0.0122695 Jy ! Component: 150 - total flux cleaned = 0.0157102 Jy ! Component: 200 - total flux cleaned = 0.0176115 Jy ! Total flux subtracted in 200 components = 0.0176115 Jy ! Clean residual min=-0.010748 max=0.011509 Jy/beam ! Clean residual mean=0.000007 rms=0.003113 Jy/beam ! Combined flux in latest and established models = 0.687204 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 205 components and 0.687204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077754Jy sigma=0.000698 ! Fit after self-cal, rms=0.077682Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398164 Jy ! Component: 100 - total flux cleaned = 0.00566871 Jy ! Component: 150 - total flux cleaned = 0.00635444 Jy ! Component: 200 - total flux cleaned = 0.00707892 Jy ! Total flux subtracted in 200 components = 0.00707892 Jy ! Clean residual min=-0.009670 max=0.010878 Jy/beam ! Clean residual mean=0.000002 rms=0.002879 Jy/beam ! Combined flux in latest and established models = 0.694283 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 218 components and 0.694283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077658Jy sigma=0.000697 ! Fit after self-cal, rms=0.077625Jy sigma=0.000696 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=8.197 mas, bpa=-8.162 degrees ! Estimated noise=2336.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 8.197 at -8.162 degrees (North through East) ! Clean map min=-0.0065908 max=0.47011 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.594 mas, bmaj=7.725 mas, bpa=-9.509 degrees ! Estimated noise=2827.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.352478 Jy ! Component: 100 - total flux cleaned = 0.45006 Jy ! Component: 150 - total flux cleaned = 0.494575 Jy ! Component: 200 - total flux cleaned = 0.520723 Jy ! Total flux subtracted in 200 components = 0.520723 Jy ! Clean residual min=-0.013412 max=0.018719 Jy/beam ! Clean residual mean=0.000044 rms=0.004253 Jy/beam ! Combined flux in latest and established models = 0.520723 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.520723 Jy ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=8.197 mas, bpa=-8.162 degrees ! Estimated noise=2336.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273004 Jy ! Component: 100 - total flux cleaned = 0.047001 Jy ! Component: 150 - total flux cleaned = 0.0626024 Jy ! Component: 200 - total flux cleaned = 0.0756771 Jy ! Total flux subtracted in 200 components = 0.0756771 Jy ! Clean residual min=-0.011804 max=0.015765 Jy/beam ! Clean residual mean=0.000046 rms=0.003847 Jy/beam ! Combined flux in latest and established models = 0.5964 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 54 components and 0.5964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.444 mas, bmaj=10.65 mas, bpa=-6.318 degrees ! Estimated noise=2857.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207083 Jy ! Component: 100 - total flux cleaned = 0.0354375 Jy ! Component: 150 - total flux cleaned = 0.0470922 Jy ! Component: 200 - total flux cleaned = 0.0549139 Jy ! Total flux subtracted in 200 components = 0.0549139 Jy ! Clean residual min=-0.013835 max=0.014986 Jy/beam ! Clean residual mean=0.000031 rms=0.004494 Jy/beam ! Combined flux in latest and established models = 0.651314 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007098 Jy ! Component: 100 - total flux cleaned = 0.0132681 Jy ! Component: 150 - total flux cleaned = 0.0186607 Jy ! Component: 200 - total flux cleaned = 0.0233788 Jy ! Total flux subtracted in 200 components = 0.0233788 Jy ! Clean residual min=-0.011775 max=0.012771 Jy/beam ! Clean residual mean=0.000012 rms=0.003590 Jy/beam ! Combined flux in latest and established models = 0.674692 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 111 components and 0.674692 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=8.197 mas, bpa=-8.162 degrees ! Estimated noise=2336.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034755 Jy ! Component: 100 - total flux cleaned = 0.00523692 Jy ! Component: 150 - total flux cleaned = 0.00699785 Jy ! Component: 200 - total flux cleaned = 0.00821027 Jy ! Total flux subtracted in 200 components = 0.00821027 Jy ! Clean residual min=-0.007784 max=0.009534 Jy/beam ! Clean residual mean=0.000007 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 0.682903 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 137 components and 0.682903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078851Jy sigma=0.000706 ! Fit after self-cal, rms=0.078665Jy sigma=0.000705 wmodel J1150+2417_S_2017_05_27_pus_map.mod ! Writing 137 model components to file: J1150+2417_S_2017_05_27_pus_map.mod wobs J1150+2417_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1150+2417_S_2017_05_27_pus_uvs.fits wwins J1150+2417_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J1150+2417_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375294 Jy ! Component: 100 - total flux cleaned = 0.00441264 Jy ! Component: 150 - total flux cleaned = 0.00476812 Jy ! Component: 200 - total flux cleaned = 0.00521263 Jy ! Component: 250 - total flux cleaned = 0.0055294 Jy ! Component: 300 - total flux cleaned = 0.00553139 Jy ! Component: 350 - total flux cleaned = 0.00582119 Jy ! Component: 400 - total flux cleaned = 0.00591379 Jy ! Component: 450 - total flux cleaned = 0.00609117 Jy ! Component: 500 - total flux cleaned = 0.00626403 Jy ! Component: 550 - total flux cleaned = 0.00642978 Jy ! Component: 600 - total flux cleaned = 0.00667075 Jy ! Component: 650 - total flux cleaned = 0.00690394 Jy ! Component: 700 - total flux cleaned = 0.00728267 Jy ! Component: 750 - total flux cleaned = 0.00772288 Jy ! Component: 800 - total flux cleaned = 0.00808276 Jy ! Component: 850 - total flux cleaned = 0.00878211 Jy ! Component: 900 - total flux cleaned = 0.0093278 Jy ! Component: 950 - total flux cleaned = 0.00986069 Jy ! Component: 1000 - total flux cleaned = 0.0103168 Jy ! Component: 1050 - total flux cleaned = 0.0107619 Jy ! Component: 1100 - total flux cleaned = 0.0112588 Jy ! Component: 1150 - total flux cleaned = 0.0116236 Jy ! Component: 1200 - total flux cleaned = 0.0120415 Jy ! Component: 1250 - total flux cleaned = 0.0123919 Jy ! Component: 1300 - total flux cleaned = 0.0127927 Jy ! Component: 1350 - total flux cleaned = 0.0130743 Jy ! Component: 1400 - total flux cleaned = 0.0134045 Jy ! Component: 1450 - total flux cleaned = 0.0136207 Jy ! Component: 1500 - total flux cleaned = 0.0139392 Jy ! Component: 1550 - total flux cleaned = 0.0143565 Jy ! Component: 1600 - total flux cleaned = 0.0146122 Jy ! Component: 1650 - total flux cleaned = 0.0150138 Jy ! Component: 1700 - total flux cleaned = 0.0153095 Jy ! Component: 1750 - total flux cleaned = 0.0156476 Jy ! Component: 1800 - total flux cleaned = 0.0158849 Jy ! Component: 1850 - total flux cleaned = 0.016071 Jy ! Component: 1900 - total flux cleaned = 0.0162092 Jy ! Component: 1950 - total flux cleaned = 0.0162546 Jy ! Component: 2000 - total flux cleaned = 0.0163434 Jy ! Component: 2050 - total flux cleaned = 0.0162555 Jy ! Component: 2100 - total flux cleaned = 0.0163417 Jy ! Component: 2150 - total flux cleaned = 0.0162131 Jy ! Component: 2200 - total flux cleaned = 0.016044 Jy ! Component: 2250 - total flux cleaned = 0.0158777 Jy ! Component: 2300 - total flux cleaned = 0.015755 Jy ! Component: 2350 - total flux cleaned = 0.0157557 Jy ! Component: 2400 - total flux cleaned = 0.0156353 Jy ! Component: 2450 - total flux cleaned = 0.0155558 Jy ! Component: 2500 - total flux cleaned = 0.015437 Jy ! Component: 2550 - total flux cleaned = 0.0152808 Jy ! Component: 2600 - total flux cleaned = 0.0152415 Jy ! Component: 2650 - total flux cleaned = 0.0150884 Jy ! Component: 2700 - total flux cleaned = 0.0150509 Jy ! Component: 2750 - total flux cleaned = 0.0149379 Jy ! Component: 2800 - total flux cleaned = 0.0150125 Jy ! Component: 2850 - total flux cleaned = 0.0148276 Jy ! Component: 2900 - total flux cleaned = 0.0147543 Jy ! Component: 2950 - total flux cleaned = 0.0146814 Jy ! Component: 3000 - total flux cleaned = 0.0144291 Jy ! Component: 3050 - total flux cleaned = 0.0143219 Jy ! Component: 3100 - total flux cleaned = 0.0141446 Jy ! Component: 3150 - total flux cleaned = 0.0140742 Jy ! Component: 3200 - total flux cleaned = 0.0139339 Jy ! Component: 3250 - total flux cleaned = 0.0137598 Jy ! Component: 3300 - total flux cleaned = 0.0135525 Jy ! Component: 3350 - total flux cleaned = 0.0134837 Jy ! Component: 3400 - total flux cleaned = 0.0132447 Jy ! Component: 3450 - total flux cleaned = 0.013177 Jy ! Component: 3500 - total flux cleaned = 0.0130422 Jy ! Component: 3550 - total flux cleaned = 0.0129419 Jy ! Component: 3600 - total flux cleaned = 0.0128752 Jy ! Component: 3650 - total flux cleaned = 0.0127097 Jy ! Component: 3700 - total flux cleaned = 0.0125776 Jy ! Component: 3750 - total flux cleaned = 0.0123814 Jy ! Component: 3800 - total flux cleaned = 0.0122839 Jy ! Component: 3850 - total flux cleaned = 0.0121217 Jy ! Component: 3900 - total flux cleaned = 0.0119601 Jy ! Component: 3950 - total flux cleaned = 0.0117348 Jy ! Component: 4000 - total flux cleaned = 0.0115425 Jy ! Component: 4050 - total flux cleaned = 0.0114146 Jy ! Total flux subtracted in 4096 components = 0.0113507 Jy ! Clean residual min=-0.002432 max=0.002085 Jy/beam ! Clean residual mean=-0.000000 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.694253 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 408 components and 0.694254 Jy ![Exited script file: muppet] wmap "J1150+2417_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 8.197 at -8.162 degrees (North through East) ! Clean map min=-0.0046158 max=0.46872 Jy/beam ! Writing clean map to FITS file: J1150+2417_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.46872 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000514694 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.329426 0.329426 0.658851 1.3177 2.63541 5.27081 10.5416 21.0832 42.1665 84.333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.468 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 8.197 at -8.162 degrees (North through East) ! Clean map min=-0.0046158 max=0.46872 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1150+2417_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:05:28 2019