! Started logfile: J1149+3559_X_2017_03_23_pus_uvs.log on Mon May 13 10:23:02 2019 obs J1149+3559_X_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1149+3559_X_2017_03_23_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.967251 visibilities/baseline/integration-bin. ! Found source: J1149+3559 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1124 lines of history. ! ! Reading 59544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1149+3559_X_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.907655Jy sigma=0.007362 ! Fit after self-cal, rms=0.892275Jy sigma=0.007262 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.764 mas, bmaj=1.278 mas, bpa=3.495 degrees ! Estimated noise=817.171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0854898 Jy ! Component: 100 - total flux cleaned = 0.109089 Jy ! Total flux subtracted in 100 components = 0.109089 Jy ! Clean residual min=-0.003335 max=0.009629 Jy/beam ! Clean residual mean=-0.000007 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.109089 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.109089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102222Jy sigma=0.000660 ! Fit after self-cal, rms=0.102231Jy sigma=0.000660 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00996633 Jy ! Component: 100 - total flux cleaned = 0.0144814 Jy ! Total flux subtracted in 100 components = 0.0144814 Jy ! Clean residual min=-0.002471 max=0.002330 Jy/beam ! Clean residual mean=0.000004 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.123571 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.123571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101542Jy sigma=0.000651 ! Fit after self-cal, rms=0.101552Jy sigma=0.000651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9715 mas, bmaj=1.59 mas, bpa=2.21 degrees ! Estimated noise=368.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216255 Jy ! Component: 100 - total flux cleaned = 3.04025e-05 Jy ! Component: 150 - total flux cleaned = -0.000209302 Jy ! Component: 200 - total flux cleaned = -0.000383997 Jy ! Total flux subtracted in 200 components = -0.000383997 Jy ! Clean residual min=-0.001562 max=0.001610 Jy/beam ! Clean residual mean=0.000012 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.123187 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.123187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101526Jy sigma=0.000650 ! Fit after self-cal, rms=0.101518Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.98 KP 1.00 ! LA 0.95 MK 0.92 NL 0.96 OV 1.01 ! PT 1.03 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00 KP 1.02 ! LA 0.98 MK 0.98 NL 0.96 OV 1.00 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.96 KP 1.01 ! LA 1.02 MK 0.99 NL 0.96 OV 0.98 ! PT 1.08 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.97 KP 0.99 ! LA 1.00 MK 0.99 NL 0.95 OV 1.04 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.95 KP 1.05 ! LA 1.02 MK 0.97 NL 0.94 OV 1.00 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.96 KP 1.01 ! LA 1.01 MK 0.96 NL 0.95 OV 1.03 ! PT 1.06 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.97 KP 1.06 ! LA 1.03 MK 0.97 NL 0.94 OV 0.99 ! PT 1.07 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.95 KP 1.01 ! LA 1.00 MK 0.99 NL 0.97 OV 1.01 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 0.97 KP 1.03 ! LA 1.02 MK 1.01 NL 0.96 OV 0.98 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.03 KP 1.03 ! LA 1.05 MK 1.00 NL 0.95 OV 1.02 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.99 KP 0.97 ! LA 1.00 MK 0.95 NL 0.98 OV 1.03 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.92 KP 1.05 ! LA 1.02 MK 0.94 NL 0.96 OV 1.04 ! PT 1.08 SC 1.02 ! ! ! Fit before self-cal, rms=0.101518Jy sigma=0.000650 ! Fit after self-cal, rms=0.102216Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9687 mas, bmaj=1.587 mas, bpa=1.276 degrees ! Estimated noise=366.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245472 Jy ! Component: 100 - total flux cleaned = -0.000288806 Jy ! Component: 150 - total flux cleaned = -0.000276761 Jy ! Component: 200 - total flux cleaned = -0.000276651 Jy ! Total flux subtracted in 200 components = -0.000276651 Jy ! Clean residual min=-0.000998 max=0.001143 Jy/beam ! Clean residual mean=0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.12291 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 21 components and 0.12291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102212Jy sigma=0.000649 ! Fit after self-cal, rms=0.102242Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102242Jy sigma=0.000649 ! Fit after self-cal, rms=0.103949Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9678 mas, bmaj=1.588 mas, bpa=1.433 degrees ! Estimated noise=366.908 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001546 Jy ! Component: 100 - total flux cleaned = 0.000176693 Jy ! Component: 150 - total flux cleaned = 0.00019023 Jy ! Component: 200 - total flux cleaned = 0.000202696 Jy ! Total flux subtracted in 200 components = 0.000202696 Jy ! Clean residual min=-0.000853 max=0.000854 Jy/beam ! Clean residual mean=0.000006 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.123113 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.123113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103948Jy sigma=0.000648 ! Fit after self-cal, rms=0.103979Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.42575e-05 Jy ! Component: 100 - total flux cleaned = -7.89792e-06 Jy ! Component: 150 - total flux cleaned = 3.77492e-06 Jy ! Component: 200 - total flux cleaned = 9.239e-06 Jy ! Total flux subtracted in 200 components = 9.239e-06 Jy ! Clean residual min=-0.000841 max=0.000859 Jy/beam ! Clean residual mean=0.000006 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.123122 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.123122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103978Jy sigma=0.000648 ! Fit after self-cal, rms=0.103978Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103978Jy sigma=0.000648 ! Fit after self-cal, rms=0.104065Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9669 mas, bmaj=1.586 mas, bpa=1.437 degrees ! Estimated noise=366.928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159179 Jy ! Component: 100 - total flux cleaned = 0.000184662 Jy ! Component: 150 - total flux cleaned = 0.000196484 Jy ! Component: 200 - total flux cleaned = 0.000207633 Jy ! Total flux subtracted in 200 components = 0.000207633 Jy ! Clean residual min=-0.000859 max=0.000864 Jy/beam ! Clean residual mean=0.000006 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.12333 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.12333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104064Jy sigma=0.000648 ! Fit after self-cal, rms=0.104066Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28215e-07 Jy ! Component: 100 - total flux cleaned = 4.85229e-06 Jy ! Component: 150 - total flux cleaned = 9.52811e-06 Jy ! Component: 200 - total flux cleaned = 9.24643e-06 Jy ! Total flux subtracted in 200 components = 9.24643e-06 Jy ! Clean residual min=-0.000854 max=0.000868 Jy/beam ! Clean residual mean=0.000006 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.123339 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.123339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104065Jy sigma=0.000648 ! Fit after self-cal, rms=0.104065Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104065Jy sigma=0.000648 ! Fit after self-cal, rms=0.104055Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.15 mas, bmaj=2.573 mas, bpa=-0.9724 degrees ! Estimated noise=457.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150021 Jy ! Component: 100 - total flux cleaned = 0.000186804 Jy ! Component: 150 - total flux cleaned = 0.000193667 Jy ! Component: 200 - total flux cleaned = 0.000201813 Jy ! Total flux subtracted in 200 components = 0.000201813 Jy ! Clean residual min=-0.000801 max=0.000952 Jy/beam ! Clean residual mean=0.000014 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.123541 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 0.123541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104056Jy sigma=0.000648 ! Fit after self-cal, rms=0.104055Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.32898e-06 Jy ! Component: 100 - total flux cleaned = 9.93892e-06 Jy ! Component: 150 - total flux cleaned = 1.68146e-05 Jy ! Component: 200 - total flux cleaned = 2.32188e-05 Jy ! Total flux subtracted in 200 components = 2.32188e-05 Jy ! Clean residual min=-0.000802 max=0.000951 Jy/beam ! Clean residual mean=0.000014 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.123564 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 31 components and 0.123564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104055Jy sigma=0.000648 ! Fit after self-cal, rms=0.104055Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9661 mas, bmaj=1.585 mas, bpa=1.441 degrees ! Estimated noise=366.921 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9661 x 1.585 at 1.441 degrees (North through East) ! Clean map min=-0.00074088 max=0.11251 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7592 mas, bmaj=1.275 mas, bpa=2.423 degrees ! Estimated noise=808.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0843271 Jy ! Component: 100 - total flux cleaned = 0.107827 Jy ! Component: 150 - total flux cleaned = 0.117626 Jy ! Component: 200 - total flux cleaned = 0.122047 Jy ! Total flux subtracted in 200 components = 0.122047 Jy ! Clean residual min=-0.002155 max=0.001974 Jy/beam ! Clean residual mean=0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.122047 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.122047 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9661 mas, bmaj=1.585 mas, bpa=1.441 degrees ! Estimated noise=366.921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018867 Jy ! Component: 100 - total flux cleaned = 0.00199247 Jy ! Component: 150 - total flux cleaned = 0.00199515 Jy ! Component: 200 - total flux cleaned = 0.00191656 Jy ! Total flux subtracted in 200 components = 0.00191656 Jy ! Clean residual min=-0.000844 max=0.000857 Jy/beam ! Clean residual mean=0.000006 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.123964 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.123964 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.15 mas, bmaj=2.573 mas, bpa=-0.9724 degrees ! Estimated noise=457.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.87995e-05 Jy ! Component: 100 - total flux cleaned = -9.83029e-05 Jy ! Component: 150 - total flux cleaned = -0.000121306 Jy ! Component: 200 - total flux cleaned = -0.000141921 Jy ! Total flux subtracted in 200 components = -0.000141921 Jy ! Clean residual min=-0.000825 max=0.000967 Jy/beam ! Clean residual mean=0.000015 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.123822 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.85111e-05 Jy ! Component: 100 - total flux cleaned = -3.50953e-05 Jy ! Component: 150 - total flux cleaned = -5.0184e-05 Jy ! Component: 200 - total flux cleaned = -6.06445e-05 Jy ! Total flux subtracted in 200 components = -6.06445e-05 Jy ! Clean residual min=-0.000818 max=0.000963 Jy/beam ! Clean residual mean=0.000014 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.123761 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 0.123761 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9661 mas, bmaj=1.585 mas, bpa=1.441 degrees ! Estimated noise=366.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.61123e-05 Jy ! Component: 100 - total flux cleaned = 6.32171e-05 Jy ! Component: 150 - total flux cleaned = 3.04713e-05 Jy ! Component: 200 - total flux cleaned = -3.65347e-07 Jy ! Total flux subtracted in 200 components = -3.65347e-07 Jy ! Clean residual min=-0.000815 max=0.000838 Jy/beam ! Clean residual mean=0.000006 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.123761 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.123761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104056Jy sigma=0.000648 ! Fit after self-cal, rms=0.104057Jy sigma=0.000648 wmodel J1149+3559_X_2017_03_23_pus_map.mod ! Writing 22 model components to file: J1149+3559_X_2017_03_23_pus_map.mod wobs J1149+3559_X_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1149+3559_X_2017_03_23_pus_uvs.fits wwins J1149+3559_X_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J1149+3559_X_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113417 Jy ! Component: 100 - total flux cleaned = 0.000216278 Jy ! Component: 150 - total flux cleaned = 0.00035756 Jy ! Component: 200 - total flux cleaned = 0.00050731 Jy ! Component: 250 - total flux cleaned = 0.000638777 Jy ! Component: 300 - total flux cleaned = 0.000753643 Jy ! Component: 350 - total flux cleaned = 0.00085259 Jy ! Component: 400 - total flux cleaned = 0.000900775 Jy ! Component: 450 - total flux cleaned = 0.000936338 Jy ! Component: 500 - total flux cleaned = 0.000982903 Jy ! Component: 550 - total flux cleaned = 0.00100595 Jy ! Component: 600 - total flux cleaned = 0.0010285 Jy ! Component: 650 - total flux cleaned = 0.0010285 Jy ! Component: 700 - total flux cleaned = 0.00108323 Jy ! Component: 750 - total flux cleaned = 0.00109384 Jy ! Component: 800 - total flux cleaned = 0.00110457 Jy ! Component: 850 - total flux cleaned = 0.00113622 Jy ! Component: 900 - total flux cleaned = 0.00116734 Jy ! Component: 950 - total flux cleaned = 0.00118791 Jy ! Component: 1000 - total flux cleaned = 0.00119816 Jy ! Component: 1050 - total flux cleaned = 0.00121831 Jy ! Component: 1100 - total flux cleaned = 0.00123826 Jy ! Component: 1150 - total flux cleaned = 0.00123834 Jy ! Component: 1200 - total flux cleaned = 0.00129677 Jy ! Component: 1250 - total flux cleaned = 0.00131588 Jy ! Component: 1300 - total flux cleaned = 0.00134448 Jy ! Component: 1350 - total flux cleaned = 0.00136331 Jy ! Component: 1400 - total flux cleaned = 0.00139122 Jy ! Component: 1450 - total flux cleaned = 0.00142806 Jy ! Component: 1500 - total flux cleaned = 0.00142809 Jy ! Component: 1550 - total flux cleaned = 0.00142816 Jy ! Component: 1600 - total flux cleaned = 0.00145522 Jy ! Component: 1650 - total flux cleaned = 0.00146411 Jy ! Component: 1700 - total flux cleaned = 0.00146428 Jy ! Component: 1750 - total flux cleaned = 0.00149939 Jy ! Component: 1800 - total flux cleaned = 0.00149067 Jy ! Component: 1850 - total flux cleaned = 0.00152511 Jy ! Component: 1900 - total flux cleaned = 0.00150795 Jy ! Component: 1950 - total flux cleaned = 0.00151648 Jy ! Component: 2000 - total flux cleaned = 0.00152497 Jy ! Total flux subtracted in 2048 components = 0.00150004 Jy ! Clean residual min=-0.000539 max=0.000460 Jy/beam ! Clean residual mean=0.000005 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.125261 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 162 components and 0.125261 Jy ![Exited script file: muppet] wmap "J1149+3559_X_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9661 x 1.585 at 1.441 degrees (North through East) ! Clean map min=-0.00065107 max=0.1125 Jy/beam ! Writing clean map to FITS file: J1149+3559_X_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155678 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415136 0.415136 0.830271 1.66054 3.32108 6.64217 13.2843 26.5687 53.1374 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9661 x 1.585 at 1.441 degrees (North through East) ! Clean map min=-0.00065107 max=0.1125 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1149+3559_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:23:05 2019