! Started logfile: J1148+1840_S_2017_02_24_pus_uvs.log on Sat May 4 11:26:18 2019 obs J1148+1840_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1148+1840_S_2017_02_24_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.971406 visibilities/baseline/integration-bin. ! Found source: J1148+1840 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 25004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1148+1840_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 459 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.614458Jy sigma=0.088722 ! Fit after self-cal, rms=0.603363Jy sigma=0.088661 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=7.119 mas, bpa=-7.665 degrees ! Estimated noise=460.407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177919 Jy ! Component: 100 - total flux cleaned = 0.201988 Jy ! Total flux subtracted in 100 components = 0.201988 Jy ! Clean residual min=-0.078443 max=0.069701 Jy/beam ! Clean residual mean=0.000113 rms=0.027803 Jy/beam ! Combined flux in latest and established models = 0.201988 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.201988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316902Jy sigma=0.017946 ! Fit after self-cal, rms=0.316881Jy sigma=0.017946 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=7.743 mas, bpa=-5.927 degrees ! Estimated noise=358.432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0669683 Jy ! Component: 100 - total flux cleaned = 0.0672688 Jy ! Component: 150 - total flux cleaned = 0.0663952 Jy ! Component: 200 - total flux cleaned = 0.0657579 Jy ! Total flux subtracted in 200 components = 0.0657579 Jy ! Clean residual min=-0.074706 max=0.050398 Jy/beam ! Clean residual mean=0.000271 rms=0.023202 Jy/beam ! Combined flux in latest and established models = 0.267746 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.267746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262002Jy sigma=0.023932 ! Fit after self-cal, rms=0.261982Jy sigma=0.023932 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.74 HN 1.05 KP 0.76 ! LA 0.72 MK 1.07 NL 0.89 OV 0.79 ! PT 0.75 SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.68 HN 1.08 KP 0.72 ! LA 0.69 MK 1.08 NL 0.88 OV 0.82 ! PT 0.73 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.70 HN 1.13 KP 0.80 ! LA 0.76 MK 1.13 NL 0.99 OV 0.75 ! PT 0.73 SC 0.90 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 16.12 HN 1.07 KP 1.00* ! LA 32.37 MK 1.14 NL 1.00* OV 0.79 ! PT 0.79 SC 1.00* ! ! ! Fit before self-cal, rms=0.261982Jy sigma=0.023932 ! Fit after self-cal, rms=17.974146Jy sigma=0.001350 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=7.507 mas, bpa=0.008116 degrees ! Estimated noise=387.861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273855 Jy ! Component: 100 - total flux cleaned = 0.0435904 Jy ! Component: 150 - total flux cleaned = 0.0503928 Jy ! Component: 200 - total flux cleaned = 0.0532039 Jy ! Total flux subtracted in 200 components = 0.0532039 Jy ! Clean residual min=-0.013122 max=0.011234 Jy/beam ! Clean residual mean=-0.000026 rms=0.003079 Jy/beam ! Combined flux in latest and established models = 0.32095 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.32095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.970490Jy sigma=0.001345 ! Fit after self-cal, rms=17.970552Jy sigma=0.001341 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=17.970552Jy sigma=0.001341 ! Fit after self-cal, rms=6.042254Jy sigma=0.000814 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.649 mas, bmaj=7.471 mas, bpa=-0.6483 degrees ! Estimated noise=386.243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00876859 Jy ! Component: 100 - total flux cleaned = 0.0136487 Jy ! Component: 150 - total flux cleaned = 0.0158443 Jy ! Component: 200 - total flux cleaned = 0.0162831 Jy ! Total flux subtracted in 200 components = 0.0162831 Jy ! Clean residual min=-0.004041 max=0.005065 Jy/beam ! Clean residual mean=-0.000013 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.337233 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.337233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.041560Jy sigma=0.000804 ! Fit after self-cal, rms=6.041563Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324737 Jy ! Component: 100 - total flux cleaned = 0.00451768 Jy ! Component: 150 - total flux cleaned = 0.00544023 Jy ! Component: 200 - total flux cleaned = 0.00601316 Jy ! Total flux subtracted in 200 components = 0.00601316 Jy ! Clean residual min=-0.003802 max=0.004300 Jy/beam ! Clean residual mean=-0.000015 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.343246 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 0.343246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.041399Jy sigma=0.000798 ! Fit after self-cal, rms=6.041399Jy sigma=0.000798 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.041399Jy sigma=0.000798 ! Fit after self-cal, rms=6.265574Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=7.437 mas, bpa=-0.8764 degrees ! Estimated noise=388.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616174 Jy ! Component: 100 - total flux cleaned = 0.00984745 Jy ! Component: 150 - total flux cleaned = 0.0118608 Jy ! Component: 200 - total flux cleaned = 0.0125443 Jy ! Total flux subtracted in 200 components = 0.0125443 Jy ! Clean residual min=-0.003383 max=0.003867 Jy/beam ! Clean residual mean=-0.000022 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.35579 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 0.35579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.264982Jy sigma=0.000787 ! Fit after self-cal, rms=6.264982Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500393 Jy ! Component: 100 - total flux cleaned = 0.000728421 Jy ! Component: 150 - total flux cleaned = 0.00108272 Jy ! Component: 200 - total flux cleaned = 0.00121672 Jy ! Total flux subtracted in 200 components = 0.00121672 Jy ! Clean residual min=-0.003298 max=0.003785 Jy/beam ! Clean residual mean=-0.000022 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.357007 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 105 components and 0.357007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.264904Jy sigma=0.000786 ! Fit after self-cal, rms=6.264904Jy sigma=0.000786 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.264904Jy sigma=0.000786 ! Fit after self-cal, rms=6.431039Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.647 mas, bmaj=10.62 mas, bpa=-0.8649 degrees ! Estimated noise=460.826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606595 Jy ! Component: 100 - total flux cleaned = 0.00883862 Jy ! Component: 150 - total flux cleaned = 0.0105596 Jy ! Component: 200 - total flux cleaned = 0.0115794 Jy ! Total flux subtracted in 200 components = 0.0115794 Jy ! Clean residual min=-0.003794 max=0.004152 Jy/beam ! Clean residual mean=-0.000048 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.368586 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 132 components and 0.368586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.430521Jy sigma=0.000782 ! Fit after self-cal, rms=6.430521Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000846969 Jy ! Component: 100 - total flux cleaned = 0.00119524 Jy ! Component: 150 - total flux cleaned = 0.00136807 Jy ! Component: 200 - total flux cleaned = 0.0014636 Jy ! Total flux subtracted in 200 components = 0.0014636 Jy ! Clean residual min=-0.003891 max=0.004185 Jy/beam ! Clean residual mean=-0.000047 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.37005 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 143 components and 0.37005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.430435Jy sigma=0.000782 ! Fit after self-cal, rms=6.430435Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=7.413 mas, bpa=-1.044 degrees ! Estimated noise=392.205 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 7.413 at -1.044 degrees (North through East) ! Clean map min=-0.0041244 max=0.31252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=6.586 mas, bpa=-1.552 degrees ! Estimated noise=613.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237318 Jy ! Component: 100 - total flux cleaned = 0.301918 Jy ! Component: 150 - total flux cleaned = 0.329445 Jy ! Component: 200 - total flux cleaned = 0.342971 Jy ! Total flux subtracted in 200 components = 0.342971 Jy ! Clean residual min=-0.004875 max=0.006899 Jy/beam ! Clean residual mean=-0.000018 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.342971 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.342971 Jy ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=7.413 mas, bpa=-1.044 degrees ! Estimated noise=392.205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00958724 Jy ! Component: 100 - total flux cleaned = 0.0158228 Jy ! Component: 150 - total flux cleaned = 0.0187556 Jy ! Component: 200 - total flux cleaned = 0.0207498 Jy ! Total flux subtracted in 200 components = 0.0207498 Jy ! Clean residual min=-0.003710 max=0.003769 Jy/beam ! Clean residual mean=-0.000024 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.363721 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 49 components and 0.363721 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.647 mas, bmaj=10.62 mas, bpa=-0.8649 degrees ! Estimated noise=460.826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343715 Jy ! Component: 100 - total flux cleaned = 0.00458461 Jy ! Component: 150 - total flux cleaned = 0.00518029 Jy ! Component: 200 - total flux cleaned = 0.00557684 Jy ! Total flux subtracted in 200 components = 0.00557684 Jy ! Clean residual min=-0.003961 max=0.004171 Jy/beam ! Clean residual mean=-0.000046 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.369298 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237366 Jy ! Component: 100 - total flux cleaned = 0.000454864 Jy ! Component: 150 - total flux cleaned = 0.000658778 Jy ! Component: 200 - total flux cleaned = 0.000803342 Jy ! Total flux subtracted in 200 components = 0.000803342 Jy ! Clean residual min=-0.004033 max=0.004208 Jy/beam ! Clean residual mean=-0.000046 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.370101 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 95 components and 0.370101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=7.413 mas, bpa=-1.044 degrees ! Estimated noise=392.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000447535 Jy ! Component: 100 - total flux cleaned = -0.000528589 Jy ! Component: 150 - total flux cleaned = -0.000377123 Jy ! Component: 200 - total flux cleaned = -0.000237701 Jy ! Total flux subtracted in 200 components = -0.000237701 Jy ! Clean residual min=-0.003443 max=0.003505 Jy/beam ! Clean residual mean=-0.000023 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.369863 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.369863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6.430414Jy sigma=0.000780 ! Fit after self-cal, rms=6.430414Jy sigma=0.000780 wmodel J1148+1840_S_2017_02_24_pus_map.mod ! Writing 115 model components to file: J1148+1840_S_2017_02_24_pus_map.mod wobs J1148+1840_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1148+1840_S_2017_02_24_pus_uvs.fits wwins J1148+1840_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J1148+1840_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000714584 Jy ! Component: 100 - total flux cleaned = 0.00146421 Jy ! Component: 150 - total flux cleaned = 0.00217979 Jy ! Component: 200 - total flux cleaned = 0.00292311 Jy ! Component: 250 - total flux cleaned = 0.00379818 Jy ! Component: 300 - total flux cleaned = 0.00455109 Jy ! Component: 350 - total flux cleaned = 0.00528665 Jy ! Component: 400 - total flux cleaned = 0.00600561 Jy ! Component: 450 - total flux cleaned = 0.00666226 Jy ! Component: 500 - total flux cleaned = 0.00712193 Jy ! Component: 550 - total flux cleaned = 0.0075746 Jy ! Component: 600 - total flux cleaned = 0.00806336 Jy ! Component: 650 - total flux cleaned = 0.00849983 Jy ! Component: 700 - total flux cleaned = 0.00901593 Jy ! Component: 750 - total flux cleaned = 0.00956593 Jy ! Component: 800 - total flux cleaned = 0.0099414 Jy ! Component: 850 - total flux cleaned = 0.0104354 Jy ! Component: 900 - total flux cleaned = 0.0108008 Jy ! Component: 950 - total flux cleaned = 0.011321 Jy ! Component: 1000 - total flux cleaned = 0.0116369 Jy ! Component: 1050 - total flux cleaned = 0.011988 Jy ! Component: 1100 - total flux cleaned = 0.0124119 Jy ! Component: 1150 - total flux cleaned = 0.0127545 Jy ! Component: 1200 - total flux cleaned = 0.0130561 Jy ! Component: 1250 - total flux cleaned = 0.0133541 Jy ! Component: 1300 - total flux cleaned = 0.013686 Jy ! Component: 1350 - total flux cleaned = 0.0139775 Jy ! Component: 1400 - total flux cleaned = 0.0143383 Jy ! Component: 1450 - total flux cleaned = 0.0146596 Jy ! Component: 1500 - total flux cleaned = 0.0149775 Jy ! Component: 1550 - total flux cleaned = 0.0151525 Jy ! Component: 1600 - total flux cleaned = 0.0154302 Jy ! Component: 1650 - total flux cleaned = 0.0157737 Jy ! Component: 1700 - total flux cleaned = 0.0160795 Jy ! Component: 1750 - total flux cleaned = 0.0162138 Jy ! Component: 1800 - total flux cleaned = 0.0165145 Jy ! Component: 1850 - total flux cleaned = 0.0167128 Jy ! Component: 1900 - total flux cleaned = 0.0171065 Jy ! Component: 1950 - total flux cleaned = 0.017269 Jy ! Component: 2000 - total flux cleaned = 0.0175273 Jy ! Component: 2050 - total flux cleaned = 0.0176558 Jy ! Component: 2100 - total flux cleaned = 0.0178783 Jy ! Component: 2150 - total flux cleaned = 0.0181938 Jy ! Component: 2200 - total flux cleaned = 0.0182876 Jy ! Component: 2250 - total flux cleaned = 0.0184122 Jy ! Component: 2300 - total flux cleaned = 0.0187209 Jy ! Component: 2350 - total flux cleaned = 0.0187513 Jy ! Component: 2400 - total flux cleaned = 0.0190252 Jy ! Component: 2450 - total flux cleaned = 0.0190253 Jy ! Component: 2500 - total flux cleaned = 0.019206 Jy ! Component: 2550 - total flux cleaned = 0.0194151 Jy ! Component: 2600 - total flux cleaned = 0.0195635 Jy ! Component: 2650 - total flux cleaned = 0.0195638 Jy ! Component: 2700 - total flux cleaned = 0.0197398 Jy ! Component: 2750 - total flux cleaned = 0.0199148 Jy ! Component: 2800 - total flux cleaned = 0.0200596 Jy ! Component: 2850 - total flux cleaned = 0.0201749 Jy ! Component: 2900 - total flux cleaned = 0.0203179 Jy ! Component: 2950 - total flux cleaned = 0.0203461 Jy ! Component: 3000 - total flux cleaned = 0.0206005 Jy ! Component: 3050 - total flux cleaned = 0.0206849 Jy ! Component: 3100 - total flux cleaned = 0.0207969 Jy ! Component: 3150 - total flux cleaned = 0.0209919 Jy ! Component: 3200 - total flux cleaned = 0.0210746 Jy ! Component: 3250 - total flux cleaned = 0.0212399 Jy ! Component: 3300 - total flux cleaned = 0.0212125 Jy ! Component: 3350 - total flux cleaned = 0.0212673 Jy ! Component: 3400 - total flux cleaned = 0.0214574 Jy ! Component: 3450 - total flux cleaned = 0.0215115 Jy ! Component: 3500 - total flux cleaned = 0.0217266 Jy ! Component: 3550 - total flux cleaned = 0.0218332 Jy ! Component: 3600 - total flux cleaned = 0.0218864 Jy ! Component: 3650 - total flux cleaned = 0.0219924 Jy ! Component: 3700 - total flux cleaned = 0.0220187 Jy ! Component: 3750 - total flux cleaned = 0.0220975 Jy ! Component: 3800 - total flux cleaned = 0.0222019 Jy ! Component: 3850 - total flux cleaned = 0.0222798 Jy ! Component: 3900 - total flux cleaned = 0.0223316 Jy ! Component: 3950 - total flux cleaned = 0.0224603 Jy ! Component: 4000 - total flux cleaned = 0.0225373 Jy ! Component: 4050 - total flux cleaned = 0.022563 Jy ! Total flux subtracted in 4096 components = 0.0225378 Jy ! Clean residual min=-0.001423 max=0.001632 Jy/beam ! Clean residual mean=-0.000015 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.392401 Jy keep ! Adding 363 model components to the UV plane model. ! The established model now contains 478 components and 0.392401 Jy ![Exited script file: muppet] wmap "J1148+1840_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 7.413 at -1.044 degrees (North through East) ! Clean map min=-0.0024632 max=0.31278 Jy/beam ! Writing clean map to FITS file: J1148+1840_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.312777 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000497635 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.477307 0.477307 0.954613 1.90923 3.81845 7.63691 15.2738 30.5476 61.0953 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.312 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 7.413 at -1.044 degrees (North through East) ! Clean map min=-0.0024632 max=0.31278 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1148+1840_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:26:24 2019