! Started logfile: J1147-3812_X_2017_05_27_pus_uvs.log on Fri May 3 10:34:50 2019 obs J1147-3812_X_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1147-3812_X_2017_05_27_pus_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.649333 visibilities/baseline/integration-bin. ! Found source: J1147-3812 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1033 lines of history. ! ! Reading 17532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1147-3812_X_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.405772Jy sigma=0.002706 ! Fit after self-cal, rms=0.393404Jy sigma=0.002639 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.5903 mas, bmaj=1.673 mas, bpa=-0.8817 degrees ! Estimated noise=1587.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.874469 Jy ! Component: 100 - total flux cleaned = 1.1157 Jy ! Total flux subtracted in 100 components = 1.1157 Jy ! Clean residual min=-0.061082 max=0.123073 Jy/beam ! Clean residual mean=-0.000407 rms=0.013018 Jy/beam ! Combined flux in latest and established models = 1.1157 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.1157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.329971Jy sigma=0.002137 ! Fit after self-cal, rms=0.329154Jy sigma=0.002134 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127872 Jy ! Component: 100 - total flux cleaned = 0.201667 Jy ! Total flux subtracted in 100 components = 0.201667 Jy ! Clean residual min=-0.039576 max=0.077179 Jy/beam ! Clean residual mean=-0.000173 rms=0.008395 Jy/beam ! Combined flux in latest and established models = 1.31737 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 1.31737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.259152Jy sigma=0.001447 ! Fit after self-cal, rms=0.256216Jy sigma=0.001428 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0661016 Jy ! Component: 100 - total flux cleaned = 0.104291 Jy ! Total flux subtracted in 100 components = 0.104291 Jy ! Clean residual min=-0.027616 max=0.059087 Jy/beam ! Clean residual mean=-0.000049 rms=0.006621 Jy/beam ! Combined flux in latest and established models = 1.42166 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 1.42166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.232304Jy sigma=0.001193 ! Fit after self-cal, rms=0.229275Jy sigma=0.001170 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-1, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0454552 Jy ! Component: 100 - total flux cleaned = 0.0772661 Jy ! Total flux subtracted in 100 components = 0.0772661 Jy ! Clean residual min=-0.025072 max=0.030218 Jy/beam ! Clean residual mean=0.000043 rms=0.005499 Jy/beam ! Combined flux in latest and established models = 1.49893 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 1.49893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215919Jy sigma=0.001051 ! Fit after self-cal, rms=0.215877Jy sigma=0.001050 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7953 mas, bmaj=2.15 mas, bpa=-0.276 degrees ! Estimated noise=896.397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341361 Jy ! Component: 100 - total flux cleaned = 0.0545049 Jy ! Component: 150 - total flux cleaned = 0.0633463 Jy ! Component: 200 - total flux cleaned = 0.0660864 Jy ! Total flux subtracted in 200 components = 0.0660864 Jy ! Clean residual min=-0.018660 max=0.019065 Jy/beam ! Clean residual mean=0.000148 rms=0.004768 Jy/beam ! Combined flux in latest and established models = 1.56501 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 55 components and 1.56501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.208924Jy sigma=0.001002 ! Fit after self-cal, rms=0.208793Jy sigma=0.001001 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.33 KP 0.98 ! LA 1.04 MK 0.94 NL 1.11 OV 0.98 ! PT 1.00 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.35 KP 0.96 ! LA 0.96 MK 0.97 NL 1.11 OV 0.98 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 1.30 KP 0.97 ! LA 0.99 MK 1.00 NL 1.10 OV 0.97 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 1.31 KP 0.97 ! LA 0.98 MK 1.00 NL 1.09 OV 0.97 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 1.23 KP 0.95 ! LA 0.98 MK 1.01 NL 1.10 OV 0.97 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.95 HN 1.28 KP 0.96 ! LA 0.98 MK 1.00 NL 1.10 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.29 KP 0.96 ! LA 0.99 MK 1.00 NL 1.09 OV 0.98 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.28 KP 0.95 ! LA 0.96 MK 0.99 NL 1.11 OV 0.98 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.29 KP 0.96 ! LA 0.98 MK 0.98 NL 1.09 OV 0.98 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.26 KP 0.97 ! LA 1.00 MK 1.00 NL 1.10 OV 0.98 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.31 KP 0.97 ! LA 1.00 MK 1.00 NL 1.09 OV 0.97 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.22 KP 1.00 ! LA 0.98 MK 0.96 NL 1.12 OV 0.97 ! PT 1.04 SC 1.02 ! ! ! Fit before self-cal, rms=0.208793Jy sigma=0.001001 ! Fit after self-cal, rms=0.197246Jy sigma=0.000884 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7977 mas, bmaj=2.15 mas, bpa=-0.3966 degrees ! Estimated noise=906.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0176572 Jy ! Component: 100 - total flux cleaned = -0.0201785 Jy ! Component: 150 - total flux cleaned = -0.0214526 Jy ! Component: 200 - total flux cleaned = -0.0225771 Jy ! Total flux subtracted in 200 components = -0.0225771 Jy ! Clean residual min=-0.013715 max=0.015207 Jy/beam ! Clean residual mean=-0.000026 rms=0.003432 Jy/beam ! Combined flux in latest and established models = 1.54243 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 1.54243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194259Jy sigma=0.000867 ! Fit after self-cal, rms=0.194375Jy sigma=0.000867 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194375Jy sigma=0.000867 ! Fit after self-cal, rms=0.190983Jy sigma=0.000822 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7991 mas, bmaj=2.153 mas, bpa=-0.4331 degrees ! Estimated noise=905.983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119512 Jy ! Component: 100 - total flux cleaned = -0.0137189 Jy ! Component: 150 - total flux cleaned = -0.0149751 Jy ! Component: 200 - total flux cleaned = -0.0158273 Jy ! Total flux subtracted in 200 components = -0.0158273 Jy ! Clean residual min=-0.010169 max=0.011093 Jy/beam ! Clean residual mean=-0.000030 rms=0.002725 Jy/beam ! Combined flux in latest and established models = 1.52661 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 1.52661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189481Jy sigma=0.000813 ! Fit after self-cal, rms=0.189459Jy sigma=0.000813 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136381 Jy ! Component: 100 - total flux cleaned = -0.00185794 Jy ! Component: 150 - total flux cleaned = -0.00253503 Jy ! Component: 200 - total flux cleaned = -0.00317098 Jy ! Total flux subtracted in 200 components = -0.00317098 Jy ! Clean residual min=-0.009065 max=0.010898 Jy/beam ! Clean residual mean=-0.000041 rms=0.002665 Jy/beam ! Combined flux in latest and established models = 1.52344 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 1.52344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188846Jy sigma=0.000809 ! Fit after self-cal, rms=0.188784Jy sigma=0.000809 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.188784Jy sigma=0.000809 ! Fit after self-cal, rms=0.186242Jy sigma=0.000715 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8004 mas, bmaj=2.155 mas, bpa=-0.3709 degrees ! Estimated noise=905.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00576573 Jy ! Component: 100 - total flux cleaned = -0.00736103 Jy ! Component: 150 - total flux cleaned = -0.00856901 Jy ! Component: 200 - total flux cleaned = -0.00948019 Jy ! Total flux subtracted in 200 components = -0.00948019 Jy ! Clean residual min=-0.008557 max=0.009295 Jy/beam ! Clean residual mean=-0.000034 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 1.51396 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 1.51396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185447Jy sigma=0.000712 ! Fit after self-cal, rms=0.185474Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621533 Jy ! Component: 100 - total flux cleaned = 0.00661996 Jy ! Component: 150 - total flux cleaned = 0.0066229 Jy ! Component: 200 - total flux cleaned = 0.00662309 Jy ! Total flux subtracted in 200 components = 0.00662309 Jy ! Clean residual min=-0.007868 max=0.006837 Jy/beam ! Clean residual mean=-0.000007 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 1.52058 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 109 components and 1.52058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184630Jy sigma=0.000708 ! Fit after self-cal, rms=0.184662Jy sigma=0.000707 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184662Jy sigma=0.000707 ! Fit after self-cal, rms=0.186201Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.447 mas, bmaj=7.842 mas, bpa=1.284 degrees ! Estimated noise=1132.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193552 Jy ! Component: 100 - total flux cleaned = -0.00257361 Jy ! Component: 150 - total flux cleaned = -0.00302579 Jy ! Component: 200 - total flux cleaned = -0.0030174 Jy ! Total flux subtracted in 200 components = -0.0030174 Jy ! Clean residual min=-0.007406 max=0.006055 Jy/beam ! Clean residual mean=0.000016 rms=0.001974 Jy/beam ! Combined flux in latest and established models = 1.51756 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 1.51756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185847Jy sigma=0.000703 ! Fit after self-cal, rms=0.185847Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450176 Jy ! Component: 100 - total flux cleaned = 0.000450002 Jy ! Component: 150 - total flux cleaned = 0.000451606 Jy ! Component: 200 - total flux cleaned = 0.000451366 Jy ! Total flux subtracted in 200 components = 0.000451366 Jy ! Clean residual min=-0.006658 max=0.005899 Jy/beam ! Clean residual mean=0.000019 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 1.51801 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 121 components and 1.51801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185783Jy sigma=0.000702 ! Fit after self-cal, rms=0.185777Jy sigma=0.000702 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8009 mas, bmaj=2.156 mas, bpa=-0.3548 degrees ! Estimated noise=904.621 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8009 x 2.156 at -0.3548 degrees (North through East) ! Clean map min=-0.0084556 max=1.154 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185777Jy sigma=0.000702 ! Fit after self-cal, rms=0.475670Jy sigma=0.000612 ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.801 mas, bmaj=2.156 mas, bpa=-0.4289 degrees ! Estimated noise=903.548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00336587 Jy ! Component: 100 - total flux cleaned = -0.00387473 Jy ! Component: 150 - total flux cleaned = -0.00433528 Jy ! Component: 200 - total flux cleaned = -0.00475352 Jy ! Total flux subtracted in 200 components = -0.00475352 Jy ! Clean residual min=-0.006348 max=0.006242 Jy/beam ! Clean residual mean=0.000001 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 1.51326 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 1.51326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.475501Jy sigma=0.000610 ! Fit after self-cal, rms=0.475476Jy sigma=0.000610 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456449 Jy ! Component: 100 - total flux cleaned = -0.000851504 Jy ! Component: 150 - total flux cleaned = -0.00108828 Jy ! Component: 200 - total flux cleaned = -0.00120279 Jy ! Total flux subtracted in 200 components = -0.00120279 Jy ! Clean residual min=-0.006049 max=0.006015 Jy/beam ! Clean residual mean=-0.000003 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 1.51206 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 1.51206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.475394Jy sigma=0.000609 ! Fit after self-cal, rms=0.475379Jy sigma=0.000609 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (3.8, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116472 Jy ! Component: 100 - total flux cleaned = 0.000363786 Jy ! Component: 150 - total flux cleaned = -0.000190345 Jy ! Component: 200 - total flux cleaned = -0.000698552 Jy ! Total flux subtracted in 200 components = -0.000698552 Jy ! Clean residual min=-0.005552 max=0.005280 Jy/beam ! Clean residual mean=-0.000001 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 1.51136 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 145 components and 1.51136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.475225Jy sigma=0.000607 ! Fit after self-cal, rms=0.475211Jy sigma=0.000607 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.475211Jy sigma=0.000607 ! Fit after self-cal, rms=0.475387Jy sigma=0.000606 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.5914 mas, bmaj=1.665 mas, bpa=-0.8429 degrees ! Estimated noise=1626.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.894592 Jy ! Component: 100 - total flux cleaned = 1.14343 Jy ! Component: 150 - total flux cleaned = 1.26526 Jy ! Component: 200 - total flux cleaned = 1.33584 Jy ! Total flux subtracted in 200 components = 1.33584 Jy ! Clean residual min=-0.017971 max=0.036155 Jy/beam ! Clean residual mean=-0.000185 rms=0.004288 Jy/beam ! Combined flux in latest and established models = 1.33584 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.33584 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.801 mas, bmaj=2.156 mas, bpa=-0.4062 degrees ! Estimated noise=902.474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073218 Jy ! Component: 100 - total flux cleaned = 0.11009 Jy ! Component: 150 - total flux cleaned = 0.131679 Jy ! Component: 200 - total flux cleaned = 0.145211 Jy ! Total flux subtracted in 200 components = 0.145211 Jy ! Clean residual min=-0.006671 max=0.010201 Jy/beam ! Clean residual mean=-0.000097 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 1.48105 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 52 components and 1.48105 Jy ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (1.2, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998141 Jy ! Component: 100 - total flux cleaned = 0.0147747 Jy ! Component: 150 - total flux cleaned = 0.0175051 Jy ! Component: 200 - total flux cleaned = 0.0199796 Jy ! Total flux subtracted in 200 components = 0.0199796 Jy ! Clean residual min=-0.005234 max=0.006869 Jy/beam ! Clean residual mean=-0.000024 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 1.50103 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 88 components and 1.50103 Jy ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-1.2, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507085 Jy ! Component: 100 - total flux cleaned = 0.00599203 Jy ! Component: 150 - total flux cleaned = 0.00653191 Jy ! Component: 200 - total flux cleaned = 0.00702744 Jy ! Total flux subtracted in 200 components = 0.00702744 Jy ! Clean residual min=-0.004802 max=0.004461 Jy/beam ! Clean residual mean=-0.000002 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 1.50806 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 1.50806 Jy ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=2.452 mas, bmaj=7.862 mas, bpa=1.277 degrees ! Estimated noise=1128.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136675 Jy ! Component: 100 - total flux cleaned = 0.00196508 Jy ! Component: 150 - total flux cleaned = 0.00230978 Jy ! Component: 200 - total flux cleaned = 0.00225316 Jy ! Total flux subtracted in 200 components = 0.00225316 Jy ! Clean residual min=-0.005257 max=0.004618 Jy/beam ! Clean residual mean=0.000024 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 1.51031 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.28562e-07 Jy ! Component: 100 - total flux cleaned = -4.80271e-05 Jy ! Component: 150 - total flux cleaned = -4.82693e-05 Jy ! Component: 200 - total flux cleaned = -8.72475e-05 Jy ! Total flux subtracted in 200 components = -8.72475e-05 Jy ! Clean residual min=-0.005298 max=0.004495 Jy/beam ! Clean residual mean=0.000027 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 1.51022 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 1.51022 Jy ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.801 mas, bmaj=2.156 mas, bpa=-0.4062 degrees ! Estimated noise=902.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000814664 Jy ! Component: 100 - total flux cleaned = -0.000811694 Jy ! Component: 150 - total flux cleaned = -0.000813406 Jy ! Component: 200 - total flux cleaned = -0.000722899 Jy ! Total flux subtracted in 200 components = -0.000722899 Jy ! Clean residual min=-0.004518 max=0.004537 Jy/beam ! Clean residual mean=0.000008 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 1.5095 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 134 components and 1.5095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.475241Jy sigma=0.000604 ! Fit after self-cal, rms=0.475114Jy sigma=0.000603 wmodel J1147-3812_X_2017_05_27_pus_map.mod ! Writing 134 model components to file: J1147-3812_X_2017_05_27_pus_map.mod wobs J1147-3812_X_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1147-3812_X_2017_05_27_pus_uvs.fits wwins J1147-3812_X_2017_05_27_pus_map.win ! wwins: Wrote 8 windows to J1147-3812_X_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432947 Jy ! Component: 100 - total flux cleaned = -0.000202251 Jy ! Component: 150 - total flux cleaned = -0.000797894 Jy ! Component: 200 - total flux cleaned = -0.00117541 Jy ! Component: 250 - total flux cleaned = -0.00129729 Jy ! Component: 300 - total flux cleaned = -0.00147461 Jy ! Component: 350 - total flux cleaned = -0.00164555 Jy ! Component: 400 - total flux cleaned = -0.00186696 Jy ! Component: 450 - total flux cleaned = -0.00202911 Jy ! Component: 500 - total flux cleaned = -0.00224215 Jy ! Component: 550 - total flux cleaned = -0.0026053 Jy ! Component: 600 - total flux cleaned = -0.00270709 Jy ! Component: 650 - total flux cleaned = -0.00280631 Jy ! Component: 700 - total flux cleaned = -0.00285529 Jy ! Component: 750 - total flux cleaned = -0.00304697 Jy ! Component: 800 - total flux cleaned = -0.00299873 Jy ! Component: 850 - total flux cleaned = -0.00299898 Jy ! Component: 900 - total flux cleaned = -0.0030455 Jy ! Component: 950 - total flux cleaned = -0.00313694 Jy ! Component: 1000 - total flux cleaned = -0.00336183 Jy ! Component: 1050 - total flux cleaned = -0.00349403 Jy ! Component: 1100 - total flux cleaned = -0.00353774 Jy ! Component: 1150 - total flux cleaned = -0.00379743 Jy ! Component: 1200 - total flux cleaned = -0.00379799 Jy ! Component: 1250 - total flux cleaned = -0.00392561 Jy ! Component: 1300 - total flux cleaned = -0.00413481 Jy ! Component: 1350 - total flux cleaned = -0.00413547 Jy ! Component: 1400 - total flux cleaned = -0.00438139 Jy ! Component: 1450 - total flux cleaned = -0.00450293 Jy ! Component: 1500 - total flux cleaned = -0.00458311 Jy ! Component: 1550 - total flux cleaned = -0.004782 Jy ! Component: 1600 - total flux cleaned = -0.00493951 Jy ! Component: 1650 - total flux cleaned = -0.00505641 Jy ! Component: 1700 - total flux cleaned = -0.00521093 Jy ! Component: 1750 - total flux cleaned = -0.00540184 Jy ! Component: 1800 - total flux cleaned = -0.00547736 Jy ! Component: 1850 - total flux cleaned = -0.00559003 Jy ! Component: 1900 - total flux cleaned = -0.00573929 Jy ! Component: 1950 - total flux cleaned = -0.00584948 Jy ! Component: 2000 - total flux cleaned = -0.00599628 Jy ! Total flux subtracted in 2048 components = -0.00606949 Jy ! Clean residual min=-0.001809 max=0.002176 Jy/beam ! Clean residual mean=0.000017 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 1.50343 Jy keep ! Adding 152 model components to the UV plane model. ! The established model now contains 286 components and 1.50343 Jy ![Exited script file: muppet] wmap "J1147-3812_X_2017_05_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.801 x 2.156 at -0.4062 degrees (North through East) ! Clean map min=-0.008283 max=1.1789 Jy/beam ! Writing clean map to FITS file: J1147-3812_X_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.17891 invert ! Inverting map ! Your choice of large map pixels excluded 0.103% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000690924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.175821 0.175821 0.351642 0.703283 1.40657 2.81313 5.62627 11.2525 22.5051 45.0101 90.0203 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.178 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.801 x 2.156 at -0.4062 degrees (North through East) ! Clean map min=-0.008283 max=1.1789 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1147-3812_X_2017_05_27_pus_uvs.log closed on Fri May 3 10:34:52 2019