! Started logfile: J1147-3812_S_2017_08_05_pus_uvs.log on Thu May 9 19:28:34 2019 obs J1147-3812_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1147-3812_S_2017_08_05_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.305983 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1147-3812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1147-3812_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 138 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.742998Jy sigma=0.004553 ! Fit after self-cal, rms=0.705894Jy sigma=0.004287 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=22.74 mas, bpa=3.07 degrees ! Estimated noise=5196.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.25463 Jy ! Component: 100 - total flux cleaned = 1.5366 Jy ! Total flux subtracted in 100 components = 1.5366 Jy ! Clean residual min=-0.074757 max=0.100030 Jy/beam ! Clean residual mean=0.000714 rms=0.024407 Jy/beam ! Combined flux in latest and established models = 1.5366 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.5366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268478Jy sigma=0.001559 ! Fit after self-cal, rms=0.268454Jy sigma=0.001559 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=26.07 mas, bpa=3.083 degrees ! Estimated noise=3973.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149304 Jy ! Component: 100 - total flux cleaned = 0.225286 Jy ! Component: 150 - total flux cleaned = 0.267805 Jy ! Component: 200 - total flux cleaned = 0.292892 Jy ! Total flux subtracted in 200 components = 0.292892 Jy ! Clean residual min=-0.029128 max=0.032556 Jy/beam ! Clean residual mean=-0.000489 rms=0.008892 Jy/beam ! Combined flux in latest and established models = 1.82949 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 98 components and 1.82949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167125Jy sigma=0.000955 ! Fit after self-cal, rms=0.167079Jy sigma=0.000955 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.05 ! LA 0.99 MK 0.99 NL 1.00* OV 1.00 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.01 ! LA 0.95 MK 0.99 NL 1.00* OV 1.03 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.88 ! LA 1.00* MK 1.02 NL 1.19 OV 0.94 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.167079Jy sigma=0.000955 ! Fit after self-cal, rms=0.118036Jy sigma=0.000709 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=26.46 mas, bpa=3.045 degrees ! Estimated noise=3972.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672174 Jy ! Component: 100 - total flux cleaned = 0.00608527 Jy ! Component: 150 - total flux cleaned = 0.00555015 Jy ! Component: 200 - total flux cleaned = 0.00506863 Jy ! Total flux subtracted in 200 components = 0.00506863 Jy ! Clean residual min=-0.018194 max=0.019748 Jy/beam ! Clean residual mean=-0.000250 rms=0.005643 Jy/beam ! Combined flux in latest and established models = 1.83456 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 1.83456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116645Jy sigma=0.000698 ! Fit after self-cal, rms=0.116637Jy sigma=0.000698 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116637Jy sigma=0.000698 ! Fit after self-cal, rms=0.109217Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=26.45 mas, bpa=3.03 degrees ! Estimated noise=3981.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124005 Jy ! Component: 100 - total flux cleaned = -0.00157812 Jy ! Component: 150 - total flux cleaned = -0.00175703 Jy ! Component: 200 - total flux cleaned = -0.00192493 Jy ! Total flux subtracted in 200 components = -0.00192493 Jy ! Clean residual min=-0.007489 max=0.007602 Jy/beam ! Clean residual mean=0.000220 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 1.83264 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 138 components and 1.83264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109138Jy sigma=0.000646 ! Fit after self-cal, rms=0.109144Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314853 Jy ! Component: 100 - total flux cleaned = -0.000478482 Jy ! Component: 150 - total flux cleaned = -0.000628799 Jy ! Component: 200 - total flux cleaned = -0.000723012 Jy ! Total flux subtracted in 200 components = -0.000723012 Jy ! Clean residual min=-0.007531 max=0.007398 Jy/beam ! Clean residual mean=0.000225 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 1.83191 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 141 components and 1.83191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109097Jy sigma=0.000646 ! Fit after self-cal, rms=0.109089Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109089Jy sigma=0.000646 ! Fit after self-cal, rms=0.109076Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=26.46 mas, bpa=3.034 degrees ! Estimated noise=3980.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103921 Jy ! Component: 100 - total flux cleaned = -0.00140266 Jy ! Component: 150 - total flux cleaned = -0.00167953 Jy ! Component: 200 - total flux cleaned = -0.00180631 Jy ! Total flux subtracted in 200 components = -0.00180631 Jy ! Clean residual min=-0.007570 max=0.007201 Jy/beam ! Clean residual mean=0.000225 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 1.83011 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 148 components and 1.83011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109031Jy sigma=0.000645 ! Fit after self-cal, rms=0.109025Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208206 Jy ! Component: 100 - total flux cleaned = -0.000296931 Jy ! Component: 150 - total flux cleaned = -0.00038064 Jy ! Component: 200 - total flux cleaned = -0.000419651 Jy ! Total flux subtracted in 200 components = -0.000419651 Jy ! Clean residual min=-0.007580 max=0.007066 Jy/beam ! Clean residual mean=0.000228 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 1.82969 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 154 components and 1.82969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108995Jy sigma=0.000645 ! Fit after self-cal, rms=0.108990Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108990Jy sigma=0.000645 ! Fit after self-cal, rms=0.108982Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.463 mas, bmaj=36.49 mas, bpa=0.1607 degrees ! Estimated noise=4959.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108598 Jy ! Component: 100 - total flux cleaned = -0.0012562 Jy ! Component: 150 - total flux cleaned = -0.00141137 Jy ! Component: 200 - total flux cleaned = -0.00155166 Jy ! Total flux subtracted in 200 components = -0.00155166 Jy ! Clean residual min=-0.007184 max=0.006937 Jy/beam ! Clean residual mean=0.000380 rms=0.002395 Jy/beam ! Combined flux in latest and established models = 1.82813 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 159 components and 1.82813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108953Jy sigma=0.000645 ! Fit after self-cal, rms=0.108951Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.07706e-05 Jy ! Component: 100 - total flux cleaned = -0.000160825 Jy ! Component: 150 - total flux cleaned = -0.000272272 Jy ! Component: 200 - total flux cleaned = -0.000370309 Jy ! Total flux subtracted in 200 components = -0.000370309 Jy ! Clean residual min=-0.007040 max=0.006847 Jy/beam ! Clean residual mean=0.000384 rms=0.002372 Jy/beam ! Combined flux in latest and established models = 1.82776 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 162 components and 1.82776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108948Jy sigma=0.000645 ! Fit after self-cal, rms=0.108946Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=26.47 mas, bpa=3.038 degrees ! Estimated noise=3978.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.588 x 26.47 at 3.038 degrees (North through East) ! Clean map min=-0.0075446 max=1.6242 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108946Jy sigma=0.000645 ! Fit after self-cal, rms=0.093316Jy sigma=0.000548 ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=26.47 mas, bpa=3.05 degrees ! Estimated noise=3977.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000842364 Jy ! Component: 100 - total flux cleaned = -0.00111523 Jy ! Component: 150 - total flux cleaned = -0.00119745 Jy ! Component: 200 - total flux cleaned = -0.00123303 Jy ! Total flux subtracted in 200 components = -0.00123303 Jy ! Clean residual min=-0.007762 max=0.007130 Jy/beam ! Clean residual mean=0.000213 rms=0.001976 Jy/beam ! Combined flux in latest and established models = 1.82653 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 166 components and 1.82653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093284Jy sigma=0.000548 ! Fit after self-cal, rms=0.093278Jy sigma=0.000548 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020935 Jy ! Component: 100 - total flux cleaned = -0.000245014 Jy ! Component: 150 - total flux cleaned = -0.000244889 Jy ! Component: 200 - total flux cleaned = -0.000277924 Jy ! Total flux subtracted in 200 components = -0.000277924 Jy ! Clean residual min=-0.007777 max=0.007016 Jy/beam ! Clean residual mean=0.000215 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 1.82625 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 169 components and 1.82625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093257Jy sigma=0.000547 ! Fit after self-cal, rms=0.093254Jy sigma=0.000547 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093254Jy sigma=0.000547 ! Fit after self-cal, rms=0.093261Jy sigma=0.000547 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=23.17 mas, bpa=3.059 degrees ! Estimated noise=5248.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26719 Jy ! Component: 100 - total flux cleaned = 1.54651 Jy ! Component: 150 - total flux cleaned = 1.65079 Jy ! Component: 200 - total flux cleaned = 1.71052 Jy ! Total flux subtracted in 200 components = 1.71052 Jy ! Clean residual min=-0.020102 max=0.030655 Jy/beam ! Clean residual mean=0.000590 rms=0.007753 Jy/beam ! Combined flux in latest and established models = 1.71052 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 1.71052 Jy ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=26.48 mas, bpa=3.051 degrees ! Estimated noise=3976.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488937 Jy ! Component: 100 - total flux cleaned = 0.0755248 Jy ! Component: 150 - total flux cleaned = 0.0911706 Jy ! Component: 200 - total flux cleaned = 0.100693 Jy ! Total flux subtracted in 200 components = 0.100693 Jy ! Clean residual min=-0.009231 max=0.009771 Jy/beam ! Clean residual mean=0.000302 rms=0.002603 Jy/beam ! Combined flux in latest and established models = 1.81121 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 129 components and 1.81121 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.464 mas, bmaj=36.51 mas, bpa=0.1893 degrees ! Estimated noise=4958.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00808607 Jy ! Component: 100 - total flux cleaned = 0.00990906 Jy ! Component: 150 - total flux cleaned = 0.0105567 Jy ! Component: 200 - total flux cleaned = 0.0110146 Jy ! Total flux subtracted in 200 components = 0.0110146 Jy ! Clean residual min=-0.007484 max=0.007521 Jy/beam ! Clean residual mean=0.000393 rms=0.002471 Jy/beam ! Combined flux in latest and established models = 1.82223 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502354 Jy ! Component: 100 - total flux cleaned = 0.000859195 Jy ! Component: 150 - total flux cleaned = 0.00117797 Jy ! Component: 200 - total flux cleaned = 0.00146888 Jy ! Total flux subtracted in 200 components = 0.00146888 Jy ! Clean residual min=-0.007481 max=0.007188 Jy/beam ! Clean residual mean=0.000374 rms=0.002409 Jy/beam ! Combined flux in latest and established models = 1.8237 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 152 components and 1.8237 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=26.48 mas, bpa=3.051 degrees ! Estimated noise=3976.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276917 Jy ! Component: 100 - total flux cleaned = 2.5635e-05 Jy ! Component: 150 - total flux cleaned = 0.000136905 Jy ! Component: 200 - total flux cleaned = 0.000421554 Jy ! Total flux subtracted in 200 components = 0.000421554 Jy ! Clean residual min=-0.008752 max=0.007216 Jy/beam ! Clean residual mean=0.000213 rms=0.002193 Jy/beam ! Combined flux in latest and established models = 1.82412 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 168 components and 1.82412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094316Jy sigma=0.000551 ! Fit after self-cal, rms=0.094278Jy sigma=0.000551 wmodel J1147-3812_S_2017_08_05_pus_map.mod ! Writing 168 model components to file: J1147-3812_S_2017_08_05_pus_map.mod wobs J1147-3812_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1147-3812_S_2017_08_05_pus_uvs.fits wwins J1147-3812_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1147-3812_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00380447 Jy ! Component: 100 - total flux cleaned = -0.00549493 Jy ! Component: 150 - total flux cleaned = -0.00663064 Jy ! Component: 200 - total flux cleaned = -0.00705287 Jy ! Component: 250 - total flux cleaned = -0.00744367 Jy ! Component: 300 - total flux cleaned = -0.00753823 Jy ! Component: 350 - total flux cleaned = -0.00770977 Jy ! Component: 400 - total flux cleaned = -0.00738379 Jy ! Component: 450 - total flux cleaned = -0.00730622 Jy ! Component: 500 - total flux cleaned = -0.00715801 Jy ! Component: 550 - total flux cleaned = -0.00722921 Jy ! Component: 600 - total flux cleaned = -0.00743065 Jy ! Component: 650 - total flux cleaned = -0.00762421 Jy ! Component: 700 - total flux cleaned = -0.007749 Jy ! Component: 750 - total flux cleaned = -0.0079886 Jy ! Component: 800 - total flux cleaned = -0.00821761 Jy ! Component: 850 - total flux cleaned = -0.00821587 Jy ! Component: 900 - total flux cleaned = -0.00816435 Jy ! Component: 950 - total flux cleaned = -0.00811403 Jy ! Component: 1000 - total flux cleaned = -0.00796501 Jy ! Component: 1050 - total flux cleaned = -0.00772698 Jy ! Component: 1100 - total flux cleaned = -0.00754254 Jy ! Component: 1150 - total flux cleaned = -0.00740798 Jy ! Component: 1200 - total flux cleaned = -0.00723299 Jy ! Component: 1250 - total flux cleaned = -0.00714803 Jy ! Component: 1300 - total flux cleaned = -0.007065 Jy ! Component: 1350 - total flux cleaned = -0.00702367 Jy ! Component: 1400 - total flux cleaned = -0.00686335 Jy ! Component: 1450 - total flux cleaned = -0.00678484 Jy ! Component: 1500 - total flux cleaned = -0.00670724 Jy ! Component: 1550 - total flux cleaned = -0.00655577 Jy ! Component: 1600 - total flux cleaned = -0.00633365 Jy ! Component: 1650 - total flux cleaned = -0.00629682 Jy ! Component: 1700 - total flux cleaned = -0.00611667 Jy ! Component: 1750 - total flux cleaned = -0.00597536 Jy ! Component: 1800 - total flux cleaned = -0.00587142 Jy ! Component: 1850 - total flux cleaned = -0.00573427 Jy ! Component: 1900 - total flux cleaned = -0.00559862 Jy ! Component: 1950 - total flux cleaned = -0.00533028 Jy ! Component: 2000 - total flux cleaned = -0.00519751 Jy ! Component: 2050 - total flux cleaned = -0.00496693 Jy ! Component: 2100 - total flux cleaned = -0.00483675 Jy ! Component: 2150 - total flux cleaned = -0.00473977 Jy ! Component: 2200 - total flux cleaned = -0.00461159 Jy ! Component: 2250 - total flux cleaned = -0.00445203 Jy ! Component: 2300 - total flux cleaned = -0.00432552 Jy ! Component: 2350 - total flux cleaned = -0.00423144 Jy ! Component: 2400 - total flux cleaned = -0.00416872 Jy ! Component: 2450 - total flux cleaned = -0.0041065 Jy ! Component: 2500 - total flux cleaned = -0.00416836 Jy ! Component: 2550 - total flux cleaned = -0.00407526 Jy ! Component: 2600 - total flux cleaned = -0.00404452 Jy ! Component: 2650 - total flux cleaned = -0.00401396 Jy ! Component: 2700 - total flux cleaned = -0.00398343 Jy ! Component: 2750 - total flux cleaned = -0.00392225 Jy ! Component: 2800 - total flux cleaned = -0.00386098 Jy ! Component: 2850 - total flux cleaned = -0.0037697 Jy ! Component: 2900 - total flux cleaned = -0.00367802 Jy ! Component: 2950 - total flux cleaned = -0.00367827 Jy ! Component: 3000 - total flux cleaned = -0.00364755 Jy ! Component: 3050 - total flux cleaned = -0.00361672 Jy ! Component: 3100 - total flux cleaned = -0.0036167 Jy ! Component: 3150 - total flux cleaned = -0.00355489 Jy ! Component: 3200 - total flux cleaned = -0.00349264 Jy ! Component: 3250 - total flux cleaned = -0.00352401 Jy ! Component: 3300 - total flux cleaned = -0.0035561 Jy ! Component: 3350 - total flux cleaned = -0.0035882 Jy ! Component: 3400 - total flux cleaned = -0.0036522 Jy ! Component: 3450 - total flux cleaned = -0.00371737 Jy ! Component: 3500 - total flux cleaned = -0.0037833 Jy ! Component: 3550 - total flux cleaned = -0.00388374 Jy ! Component: 3600 - total flux cleaned = -0.00391732 Jy ! Component: 3650 - total flux cleaned = -0.00402018 Jy ! Component: 3700 - total flux cleaned = -0.00408978 Jy ! Component: 3750 - total flux cleaned = -0.00412513 Jy ! Component: 3800 - total flux cleaned = -0.00423192 Jy ! Component: 3850 - total flux cleaned = -0.00430394 Jy ! Component: 3900 - total flux cleaned = -0.00441341 Jy ! Component: 3950 - total flux cleaned = -0.00444984 Jy ! Component: 4000 - total flux cleaned = -0.00456177 Jy ! Component: 4050 - total flux cleaned = -0.00467564 Jy ! Total flux subtracted in 4096 components = -0.00475241 Jy ! Clean residual min=-0.002157 max=0.002091 Jy/beam ! Clean residual mean=0.000115 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 1.81936 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 427 components and 1.81937 Jy ![Exited script file: muppet] wmap "J1147-3812_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 26.48 at 3.051 degrees (North through East) ! Clean map min=-0.0043116 max=1.6314 Jy/beam ! Writing clean map to FITS file: J1147-3812_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.63141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000668623 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122953 0.122953 0.245906 0.491811 0.983623 1.96725 3.93449 7.86898 15.738 31.4759 62.9519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.631 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 26.48 at 3.051 degrees (North through East) ! Clean map min=-0.0043116 max=1.6314 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1147-3812_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:28:40 2019