! Started logfile: J1147-3812_S_2017_07_09_pus_uvs.log on Wed May 8 14:48:10 2019 obs J1147-3812_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1147-3812_S_2017_07_09_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.403419 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1147-3812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1147-3812_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.437114Jy sigma=0.002918 ! Fit after self-cal, rms=0.310587Jy sigma=0.002023 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.565 mas, bmaj=7.716 mas, bpa=5.563 degrees ! Estimated noise=4017.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.874296 Jy ! Component: 100 - total flux cleaned = 1.07585 Jy ! Total flux subtracted in 100 components = 1.07585 Jy ! Clean residual min=-0.056306 max=0.094356 Jy/beam ! Clean residual mean=-0.001932 rms=0.020700 Jy/beam ! Combined flux in latest and established models = 1.07585 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.07585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267092Jy sigma=0.001731 ! Fit after self-cal, rms=0.267081Jy sigma=0.001731 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=9.152 mas, bpa=5.279 degrees ! Estimated noise=3046.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130578 Jy ! Component: 100 - total flux cleaned = 0.189084 Jy ! Component: 150 - total flux cleaned = 0.21754 Jy ! Component: 200 - total flux cleaned = 0.231607 Jy ! Total flux subtracted in 200 components = 0.231607 Jy ! Clean residual min=-0.040516 max=0.058211 Jy/beam ! Clean residual mean=-0.000477 rms=0.014457 Jy/beam ! Combined flux in latest and established models = 1.30745 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 37 components and 1.30745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200944Jy sigma=0.001309 ! Fit after self-cal, rms=0.200790Jy sigma=0.001308 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.78 FD 0.98 HN 1.00* KP 1.01 ! LA 0.96 MK 1.01 NL 1.00* OV 0.99 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.97 ! LA 0.92 MK 1.01 NL 1.00* OV 1.01 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 1.01 ! LA 0.91 MK 1.02 NL 1.00* OV 0.91 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.200790Jy sigma=0.001308 ! Fit after self-cal, rms=0.127918Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=9.227 mas, bpa=5.198 degrees ! Estimated noise=3056.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237557 Jy ! Component: 100 - total flux cleaned = -0.00238094 Jy ! Component: 150 - total flux cleaned = -0.00222642 Jy ! Component: 200 - total flux cleaned = -0.00222782 Jy ! Total flux subtracted in 200 components = -0.00222782 Jy ! Clean residual min=-0.024756 max=0.022234 Jy/beam ! Clean residual mean=0.000773 rms=0.006796 Jy/beam ! Combined flux in latest and established models = 1.30523 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 1.30523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127488Jy sigma=0.000777 ! Fit after self-cal, rms=0.127630Jy sigma=0.000777 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127630Jy sigma=0.000777 ! Fit after self-cal, rms=0.115120Jy sigma=0.000685 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=9.223 mas, bpa=5.219 degrees ! Estimated noise=3052.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159796 Jy ! Component: 100 - total flux cleaned = 0.00118806 Jy ! Component: 150 - total flux cleaned = 0.000950975 Jy ! Component: 200 - total flux cleaned = 0.000546867 Jy ! Total flux subtracted in 200 components = 0.000546867 Jy ! Clean residual min=-0.011767 max=0.015856 Jy/beam ! Clean residual mean=-0.000135 rms=0.002861 Jy/beam ! Combined flux in latest and established models = 1.30577 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 1.30577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114815Jy sigma=0.000683 ! Fit after self-cal, rms=0.114805Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126821 Jy ! Component: 100 - total flux cleaned = 0.0137231 Jy ! Component: 150 - total flux cleaned = 0.0135713 Jy ! Component: 200 - total flux cleaned = 0.0136919 Jy ! Total flux subtracted in 200 components = 0.0136919 Jy ! Clean residual min=-0.009326 max=0.007603 Jy/beam ! Clean residual mean=0.000023 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 1.31946 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 1.31946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113395Jy sigma=0.000673 ! Fit after self-cal, rms=0.113327Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113327Jy sigma=0.000673 ! Fit after self-cal, rms=0.113001Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=9.216 mas, bpa=5.253 degrees ! Estimated noise=3046.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036148 Jy ! Component: 100 - total flux cleaned = 0.00348862 Jy ! Component: 150 - total flux cleaned = 0.00338745 Jy ! Component: 200 - total flux cleaned = 0.00329462 Jy ! Total flux subtracted in 200 components = 0.00329462 Jy ! Clean residual min=-0.008132 max=0.007132 Jy/beam ! Clean residual mean=-0.000011 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 1.32276 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 1.32276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112747Jy sigma=0.000670 ! Fit after self-cal, rms=0.112739Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000794465 Jy ! Component: 100 - total flux cleaned = 0.000875741 Jy ! Component: 150 - total flux cleaned = 0.000874331 Jy ! Component: 200 - total flux cleaned = 0.000949018 Jy ! Total flux subtracted in 200 components = 0.000949018 Jy ! Clean residual min=-0.007883 max=0.006936 Jy/beam ! Clean residual mean=0.000001 rms=0.001928 Jy/beam ! Combined flux in latest and established models = 1.32371 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 1.32371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112637Jy sigma=0.000670 ! Fit after self-cal, rms=0.112638Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112638Jy sigma=0.000670 ! Fit after self-cal, rms=0.112532Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.857 mas, bmaj=31.38 mas, bpa=5.07 degrees ! Estimated noise=3970.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000389452 Jy ! Component: 100 - total flux cleaned = 0.000570414 Jy ! Component: 150 - total flux cleaned = 0.000688039 Jy ! Component: 200 - total flux cleaned = 0.000844263 Jy ! Total flux subtracted in 200 components = 0.000844263 Jy ! Clean residual min=-0.007435 max=0.006860 Jy/beam ! Clean residual mean=-0.000021 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 1.32455 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 93 components and 1.32455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112514Jy sigma=0.000670 ! Fit after self-cal, rms=0.112516Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143671 Jy ! Component: 100 - total flux cleaned = 0.000197672 Jy ! Component: 150 - total flux cleaned = 0.000350413 Jy ! Component: 200 - total flux cleaned = 0.000489466 Jy ! Total flux subtracted in 200 components = 0.000489466 Jy ! Clean residual min=-0.007368 max=0.006684 Jy/beam ! Clean residual mean=-0.000009 rms=0.002255 Jy/beam ! Combined flux in latest and established models = 1.32504 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 93 components and 1.32504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112520Jy sigma=0.000670 ! Fit after self-cal, rms=0.112520Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=9.215 mas, bpa=5.261 degrees ! Estimated noise=3043.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 9.215 at 5.261 degrees (North through East) ! Clean map min=-0.0081156 max=1.1448 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112520Jy sigma=0.000670 ! Fit after self-cal, rms=0.095403Jy sigma=0.000570 ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=9.228 mas, bpa=5.294 degrees ! Estimated noise=3047.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387928 Jy ! Component: 100 - total flux cleaned = -0.000462324 Jy ! Component: 150 - total flux cleaned = -0.000531863 Jy ! Component: 200 - total flux cleaned = -0.000530735 Jy ! Total flux subtracted in 200 components = -0.000530735 Jy ! Clean residual min=-0.007382 max=0.007110 Jy/beam ! Clean residual mean=-0.000005 rms=0.001842 Jy/beam ! Combined flux in latest and established models = 1.32451 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 1.32451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095308Jy sigma=0.000569 ! Fit after self-cal, rms=0.095306Jy sigma=0.000569 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.44393e-06 Jy ! Component: 100 - total flux cleaned = 5.57085e-05 Jy ! Component: 150 - total flux cleaned = 5.71777e-05 Jy ! Component: 200 - total flux cleaned = 0.000112359 Jy ! Total flux subtracted in 200 components = 0.000112359 Jy ! Clean residual min=-0.007231 max=0.006962 Jy/beam ! Clean residual mean=-0.000003 rms=0.001811 Jy/beam ! Combined flux in latest and established models = 1.32462 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 104 components and 1.32462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095251Jy sigma=0.000569 ! Fit after self-cal, rms=0.095252Jy sigma=0.000569 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095252Jy sigma=0.000569 ! Fit after self-cal, rms=0.095202Jy sigma=0.000569 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=7.697 mas, bpa=5.619 degrees ! Estimated noise=4129.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.898457 Jy ! Component: 100 - total flux cleaned = 1.1094 Jy ! Component: 150 - total flux cleaned = 1.19049 Jy ! Component: 200 - total flux cleaned = 1.23439 Jy ! Total flux subtracted in 200 components = 1.23439 Jy ! Clean residual min=-0.016351 max=0.024455 Jy/beam ! Clean residual mean=-0.000614 rms=0.004724 Jy/beam ! Combined flux in latest and established models = 1.23439 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.23439 Jy ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=9.227 mas, bpa=5.295 degrees ! Estimated noise=3045.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367775 Jy ! Component: 100 - total flux cleaned = 0.0563658 Jy ! Component: 150 - total flux cleaned = 0.0684796 Jy ! Component: 200 - total flux cleaned = 0.0765829 Jy ! Total flux subtracted in 200 components = 0.0765829 Jy ! Clean residual min=-0.008905 max=0.006906 Jy/beam ! Clean residual mean=-0.000169 rms=0.002062 Jy/beam ! Combined flux in latest and established models = 1.31097 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 68 components and 1.31097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.859 mas, bmaj=31.43 mas, bpa=5.102 degrees ! Estimated noise=3969.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00748733 Jy ! Component: 100 - total flux cleaned = 0.0115211 Jy ! Component: 150 - total flux cleaned = 0.0137516 Jy ! Component: 200 - total flux cleaned = 0.0141974 Jy ! Total flux subtracted in 200 components = 0.0141974 Jy ! Clean residual min=-0.007521 max=0.006521 Jy/beam ! Clean residual mean=0.000004 rms=0.002230 Jy/beam ! Combined flux in latest and established models = 1.32517 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269047 Jy ! Component: 100 - total flux cleaned = 0.000508223 Jy ! Component: 150 - total flux cleaned = 0.000680272 Jy ! Component: 200 - total flux cleaned = 0.000838671 Jy ! Total flux subtracted in 200 components = 0.000838671 Jy ! Clean residual min=-0.007243 max=0.006486 Jy/beam ! Clean residual mean=0.000022 rms=0.002202 Jy/beam ! Combined flux in latest and established models = 1.326 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 105 components and 1.326 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=9.227 mas, bpa=5.295 degrees ! Estimated noise=3045.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109135 Jy ! Component: 100 - total flux cleaned = -0.000963143 Jy ! Component: 150 - total flux cleaned = -0.000762236 Jy ! Component: 200 - total flux cleaned = -0.000594546 Jy ! Total flux subtracted in 200 components = -0.000594546 Jy ! Clean residual min=-0.006898 max=0.006659 Jy/beam ! Clean residual mean=0.000004 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 1.32541 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 1.32541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095153Jy sigma=0.000568 ! Fit after self-cal, rms=0.095134Jy sigma=0.000568 wmodel J1147-3812_S_2017_07_09_pus_map.mod ! Writing 122 model components to file: J1147-3812_S_2017_07_09_pus_map.mod wobs J1147-3812_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1147-3812_S_2017_07_09_pus_uvs.fits wwins J1147-3812_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J1147-3812_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111789 Jy ! Component: 100 - total flux cleaned = -0.00100882 Jy ! Component: 150 - total flux cleaned = -0.000905181 Jy ! Component: 200 - total flux cleaned = -0.0011842 Jy ! Component: 250 - total flux cleaned = -0.00127228 Jy ! Component: 300 - total flux cleaned = -0.00135804 Jy ! Component: 350 - total flux cleaned = -0.00120668 Jy ! Component: 400 - total flux cleaned = -0.00106343 Jy ! Component: 450 - total flux cleaned = -0.000855167 Jy ! Component: 500 - total flux cleaned = -0.000720798 Jy ! Component: 550 - total flux cleaned = -0.00065726 Jy ! Component: 600 - total flux cleaned = -0.000841717 Jy ! Component: 650 - total flux cleaned = -0.000841315 Jy ! Component: 700 - total flux cleaned = -0.000955059 Jy ! Component: 750 - total flux cleaned = -0.00100957 Jy ! Component: 800 - total flux cleaned = -0.00106301 Jy ! Component: 850 - total flux cleaned = -0.00121543 Jy ! Component: 900 - total flux cleaned = -0.00131251 Jy ! Component: 950 - total flux cleaned = -0.00135934 Jy ! Component: 1000 - total flux cleaned = -0.0013588 Jy ! Component: 1050 - total flux cleaned = -0.00131388 Jy ! Component: 1100 - total flux cleaned = -0.00135689 Jy ! Component: 1150 - total flux cleaned = -0.00135627 Jy ! Component: 1200 - total flux cleaned = -0.00147998 Jy ! Component: 1250 - total flux cleaned = -0.00156014 Jy ! Component: 1300 - total flux cleaned = -0.00171621 Jy ! Component: 1350 - total flux cleaned = -0.00171608 Jy ! Component: 1400 - total flux cleaned = -0.00182852 Jy ! Component: 1450 - total flux cleaned = -0.00186475 Jy ! Component: 1500 - total flux cleaned = -0.00190067 Jy ! Component: 1550 - total flux cleaned = -0.00193606 Jy ! Component: 1600 - total flux cleaned = -0.00200497 Jy ! Component: 1650 - total flux cleaned = -0.00210491 Jy ! Component: 1700 - total flux cleaned = -0.00213733 Jy ! Component: 1750 - total flux cleaned = -0.0022014 Jy ! Component: 1800 - total flux cleaned = -0.0021377 Jy ! Component: 1850 - total flux cleaned = -0.00213809 Jy ! Component: 1900 - total flux cleaned = -0.00219974 Jy ! Component: 1950 - total flux cleaned = -0.0022299 Jy ! Component: 2000 - total flux cleaned = -0.00225992 Jy ! Component: 2050 - total flux cleaned = -0.00228964 Jy ! Component: 2100 - total flux cleaned = -0.00234784 Jy ! Component: 2150 - total flux cleaned = -0.00240524 Jy ! Component: 2200 - total flux cleaned = -0.00246212 Jy ! Component: 2250 - total flux cleaned = -0.0025463 Jy ! Component: 2300 - total flux cleaned = -0.00268449 Jy ! Component: 2350 - total flux cleaned = -0.00276604 Jy ! Component: 2400 - total flux cleaned = -0.00287371 Jy ! Component: 2450 - total flux cleaned = -0.00292691 Jy ! Component: 2500 - total flux cleaned = -0.00303236 Jy ! Component: 2550 - total flux cleaned = -0.00316272 Jy ! Component: 2600 - total flux cleaned = -0.00329159 Jy ! Component: 2650 - total flux cleaned = -0.00339375 Jy ! Component: 2700 - total flux cleaned = -0.0035205 Jy ! Component: 2750 - total flux cleaned = -0.00362079 Jy ! Component: 2800 - total flux cleaned = -0.00372035 Jy ! Component: 2850 - total flux cleaned = -0.00379449 Jy ! Component: 2900 - total flux cleaned = -0.00391703 Jy ! Component: 2950 - total flux cleaned = -0.00399004 Jy ! Component: 3000 - total flux cleaned = -0.004087 Jy ! Component: 3050 - total flux cleaned = -0.00420725 Jy ! Component: 3100 - total flux cleaned = -0.00432654 Jy ! Component: 3150 - total flux cleaned = -0.00442128 Jy ! Component: 3200 - total flux cleaned = -0.00451563 Jy ! Component: 3250 - total flux cleaned = -0.00467947 Jy ! Component: 3300 - total flux cleaned = -0.00477248 Jy ! Component: 3350 - total flux cleaned = -0.00486497 Jy ! Component: 3400 - total flux cleaned = -0.00495708 Jy ! Component: 3450 - total flux cleaned = -0.00504879 Jy ! Component: 3500 - total flux cleaned = -0.00516295 Jy ! Component: 3550 - total flux cleaned = -0.00525369 Jy ! Component: 3600 - total flux cleaned = -0.00534387 Jy ! Component: 3650 - total flux cleaned = -0.00541141 Jy ! Component: 3700 - total flux cleaned = -0.00556801 Jy ! Component: 3750 - total flux cleaned = -0.0056125 Jy ! Component: 3800 - total flux cleaned = -0.00567924 Jy ! Component: 3850 - total flux cleaned = -0.00570146 Jy ! Component: 3900 - total flux cleaned = -0.005768 Jy ! Component: 3950 - total flux cleaned = -0.00579018 Jy ! Component: 4000 - total flux cleaned = -0.00583428 Jy ! Component: 4050 - total flux cleaned = -0.00585625 Jy ! Total flux subtracted in 4096 components = -0.00587837 Jy ! Clean residual min=-0.001207 max=0.001508 Jy/beam ! Clean residual mean=-0.000020 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 1.31953 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 352 components and 1.31953 Jy ![Exited script file: muppet] wmap "J1147-3812_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 9.227 at 5.295 degrees (North through East) ! Clean map min=-0.0031993 max=1.1624 Jy/beam ! Writing clean map to FITS file: J1147-3812_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.16244 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000371115 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0957764 0.0957764 0.191553 0.383106 0.766211 1.53242 3.06485 6.12969 12.2594 24.5188 49.0375 98.075 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.162 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.065 x 9.227 at 5.295 degrees (North through East) ! Clean map min=-0.0031993 max=1.1624 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1147-3812_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:48:15 2019