! Started logfile: J1147-3812_S_2017_06_10_pus_uvs.log on Mon May 6 14:52:06 2019 obs J1147-3812_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1147-3812_S_2017_06_10_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.420513 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1147-3812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1147-3812_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.410310Jy sigma=0.002842 ! Fit after self-cal, rms=0.233587Jy sigma=0.001592 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=6.714 mas, bpa=4.889 degrees ! Estimated noise=4274.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.795235 Jy ! Component: 100 - total flux cleaned = 1.01122 Jy ! Total flux subtracted in 100 components = 1.01122 Jy ! Clean residual min=-0.041072 max=0.089440 Jy/beam ! Clean residual mean=-0.001526 rms=0.016741 Jy/beam ! Combined flux in latest and established models = 1.01122 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.01122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203803Jy sigma=0.001408 ! Fit after self-cal, rms=0.203596Jy sigma=0.001407 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=7.601 mas, bpa=4.356 degrees ! Estimated noise=3766.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128408 Jy ! Component: 100 - total flux cleaned = 0.189623 Jy ! Component: 150 - total flux cleaned = 0.220312 Jy ! Component: 200 - total flux cleaned = 0.236109 Jy ! Total flux subtracted in 200 components = 0.236109 Jy ! Clean residual min=-0.013256 max=0.016980 Jy/beam ! Clean residual mean=-0.000707 rms=0.004532 Jy/beam ! Combined flux in latest and established models = 1.24733 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 42 components and 1.24733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109469Jy sigma=0.000744 ! Fit after self-cal, rms=0.109344Jy sigma=0.000743 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.03 ! LA 1.01 MK 1.00 NL 1.00* OV 1.03 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.99 ! LA 0.96 MK 0.99 NL 1.00* OV 1.07 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.96 ! LA 0.96 MK 1.02 NL 1.00* OV 0.96 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.109344Jy sigma=0.000743 ! Fit after self-cal, rms=0.097481Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.718 mas, bmaj=7.616 mas, bpa=4.372 degrees ! Estimated noise=3746.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106663 Jy ! Component: 100 - total flux cleaned = 0.0117348 Jy ! Component: 150 - total flux cleaned = 0.0119489 Jy ! Component: 200 - total flux cleaned = 0.0120377 Jy ! Total flux subtracted in 200 components = 0.0120377 Jy ! Clean residual min=-0.007205 max=0.007733 Jy/beam ! Clean residual mean=-0.000128 rms=0.001931 Jy/beam ! Combined flux in latest and established models = 1.25936 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 1.25936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096374Jy sigma=0.000661 ! Fit after self-cal, rms=0.096364Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096364Jy sigma=0.000661 ! Fit after self-cal, rms=0.096119Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=7.61 mas, bpa=4.39 degrees ! Estimated noise=3739.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000964097 Jy ! Component: 100 - total flux cleaned = 0.000825235 Jy ! Component: 150 - total flux cleaned = 0.000766569 Jy ! Component: 200 - total flux cleaned = 0.000764739 Jy ! Total flux subtracted in 200 components = 0.000764739 Jy ! Clean residual min=-0.006969 max=0.007434 Jy/beam ! Clean residual mean=-0.000123 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 1.26013 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 1.26013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096018Jy sigma=0.000660 ! Fit after self-cal, rms=0.096017Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.864e-05 Jy ! Component: 100 - total flux cleaned = 4.92355e-05 Jy ! Component: 150 - total flux cleaned = 9.58275e-05 Jy ! Component: 200 - total flux cleaned = 9.51888e-05 Jy ! Total flux subtracted in 200 components = 9.51888e-05 Jy ! Clean residual min=-0.006860 max=0.007222 Jy/beam ! Clean residual mean=-0.000122 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 1.26022 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 1.26022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095975Jy sigma=0.000660 ! Fit after self-cal, rms=0.095975Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095975Jy sigma=0.000660 ! Fit after self-cal, rms=0.095862Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=7.609 mas, bpa=4.409 degrees ! Estimated noise=3735.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000388818 Jy ! Component: 100 - total flux cleaned = -0.000436441 Jy ! Component: 150 - total flux cleaned = -0.000482916 Jy ! Component: 200 - total flux cleaned = -0.000526481 Jy ! Total flux subtracted in 200 components = -0.000526481 Jy ! Clean residual min=-0.006647 max=0.007014 Jy/beam ! Clean residual mean=-0.000114 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 1.2597 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 1.2597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095822Jy sigma=0.000660 ! Fit after self-cal, rms=0.095821Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130016 Jy ! Component: 100 - total flux cleaned = -0.000130692 Jy ! Component: 150 - total flux cleaned = -0.000131805 Jy ! Component: 200 - total flux cleaned = -9.49121e-05 Jy ! Total flux subtracted in 200 components = -9.49121e-05 Jy ! Clean residual min=-0.006542 max=0.006916 Jy/beam ! Clean residual mean=-0.000115 rms=0.001776 Jy/beam ! Combined flux in latest and established models = 1.2596 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 88 components and 1.2596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095792Jy sigma=0.000659 ! Fit after self-cal, rms=0.095793Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095793Jy sigma=0.000659 ! Fit after self-cal, rms=0.095709Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.88 mas, bmaj=28.85 mas, bpa=6.023 degrees ! Estimated noise=5149.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373194 Jy ! Component: 100 - total flux cleaned = 0.000490247 Jy ! Component: 150 - total flux cleaned = 0.000489921 Jy ! Component: 200 - total flux cleaned = 0.000457182 Jy ! Total flux subtracted in 200 components = 0.000457182 Jy ! Clean residual min=-0.006717 max=0.007460 Jy/beam ! Clean residual mean=-0.000223 rms=0.002388 Jy/beam ! Combined flux in latest and established models = 1.26006 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 1.26006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095699Jy sigma=0.000659 ! Fit after self-cal, rms=0.095697Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59959e-05 Jy ! Component: 100 - total flux cleaned = 3.63705e-05 Jy ! Component: 150 - total flux cleaned = 8.87798e-06 Jy ! Component: 200 - total flux cleaned = 8.20298e-06 Jy ! Total flux subtracted in 200 components = 8.20298e-06 Jy ! Clean residual min=-0.006648 max=0.007377 Jy/beam ! Clean residual mean=-0.000223 rms=0.002378 Jy/beam ! Combined flux in latest and established models = 1.26007 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 97 components and 1.26007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095698Jy sigma=0.000659 ! Fit after self-cal, rms=0.095699Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=7.608 mas, bpa=4.42 degrees ! Estimated noise=3733.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.714 x 7.608 at 4.42 degrees (North through East) ! Clean map min=-0.0058283 max=1.04 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095699Jy sigma=0.000659 ! Fit after self-cal, rms=0.086656Jy sigma=0.000594 ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=7.609 mas, bpa=4.427 degrees ! Estimated noise=3735.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360923 Jy ! Component: 100 - total flux cleaned = 0.00053538 Jy ! Component: 150 - total flux cleaned = 0.000497142 Jy ! Component: 200 - total flux cleaned = 0.000460354 Jy ! Total flux subtracted in 200 components = 0.000460354 Jy ! Clean residual min=-0.006137 max=0.006833 Jy/beam ! Clean residual mean=-0.000122 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 1.26053 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 101 components and 1.26053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086622Jy sigma=0.000594 ! Fit after self-cal, rms=0.086621Jy sigma=0.000594 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.23918e-06 Jy ! Component: 100 - total flux cleaned = -2.87179e-05 Jy ! Component: 150 - total flux cleaned = -9.31675e-05 Jy ! Component: 200 - total flux cleaned = -0.00015449 Jy ! Total flux subtracted in 200 components = -0.00015449 Jy ! Clean residual min=-0.006104 max=0.006750 Jy/beam ! Clean residual mean=-0.000123 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 1.26037 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 1.26037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086601Jy sigma=0.000594 ! Fit after self-cal, rms=0.086601Jy sigma=0.000594 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086601Jy sigma=0.000594 ! Fit after self-cal, rms=0.086554Jy sigma=0.000594 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.264 mas, bmaj=6.715 mas, bpa=4.947 degrees ! Estimated noise=4238.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.78847 Jy ! Component: 100 - total flux cleaned = 1.00346 Jy ! Component: 150 - total flux cleaned = 1.09983 Jy ! Component: 200 - total flux cleaned = 1.15419 Jy ! Total flux subtracted in 200 components = 1.15419 Jy ! Clean residual min=-0.018808 max=0.029396 Jy/beam ! Clean residual mean=-0.000595 rms=0.006560 Jy/beam ! Combined flux in latest and established models = 1.15419 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.15419 Jy ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=7.607 mas, bpa=4.431 degrees ! Estimated noise=3733.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046901 Jy ! Component: 100 - total flux cleaned = 0.070549 Jy ! Component: 150 - total flux cleaned = 0.0836475 Jy ! Component: 200 - total flux cleaned = 0.0920658 Jy ! Total flux subtracted in 200 components = 0.0920658 Jy ! Clean residual min=-0.008057 max=0.006842 Jy/beam ! Clean residual mean=-0.000248 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 1.24626 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 64 components and 1.24626 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.88 mas, bmaj=28.85 mas, bpa=6.036 degrees ! Estimated noise=5150.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764227 Jy ! Component: 100 - total flux cleaned = 0.0114783 Jy ! Component: 150 - total flux cleaned = 0.0134992 Jy ! Component: 200 - total flux cleaned = 0.0144326 Jy ! Total flux subtracted in 200 components = 0.0144326 Jy ! Clean residual min=-0.006447 max=0.006108 Jy/beam ! Clean residual mean=-0.000267 rms=0.002320 Jy/beam ! Combined flux in latest and established models = 1.26069 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167335 Jy ! Component: 100 - total flux cleaned = 0.000285333 Jy ! Component: 150 - total flux cleaned = 0.000413797 Jy ! Component: 200 - total flux cleaned = 0.000505145 Jy ! Total flux subtracted in 200 components = 0.000505145 Jy ! Clean residual min=-0.006270 max=0.005889 Jy/beam ! Clean residual mean=-0.000258 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 1.26119 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 88 components and 1.26119 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.714 mas, bmaj=7.607 mas, bpa=4.431 degrees ! Estimated noise=3733.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000543133 Jy ! Component: 100 - total flux cleaned = 0.00013969 Jy ! Component: 150 - total flux cleaned = -3.3446e-05 Jy ! Component: 200 - total flux cleaned = -0.00018566 Jy ! Total flux subtracted in 200 components = -0.00018566 Jy ! Clean residual min=-0.006755 max=0.006968 Jy/beam ! Clean residual mean=-0.000119 rms=0.001793 Jy/beam ! Combined flux in latest and established models = 1.26101 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 1.26101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086694Jy sigma=0.000595 ! Fit after self-cal, rms=0.086642Jy sigma=0.000595 wmodel J1147-3812_S_2017_06_10_pus_map.mod ! Writing 103 model components to file: J1147-3812_S_2017_06_10_pus_map.mod wobs J1147-3812_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1147-3812_S_2017_06_10_pus_uvs.fits wwins J1147-3812_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1147-3812_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.73014e-05 Jy ! Component: 100 - total flux cleaned = -0.000170156 Jy ! Component: 150 - total flux cleaned = -0.000532528 Jy ! Component: 200 - total flux cleaned = -0.00112605 Jy ! Component: 250 - total flux cleaned = -0.00159386 Jy ! Component: 300 - total flux cleaned = -0.00209857 Jy ! Component: 350 - total flux cleaned = -0.0023013 Jy ! Component: 400 - total flux cleaned = -0.00249175 Jy ! Component: 450 - total flux cleaned = -0.00273217 Jy ! Component: 500 - total flux cleaned = -0.00301981 Jy ! Component: 550 - total flux cleaned = -0.0033484 Jy ! Component: 600 - total flux cleaned = -0.00355861 Jy ! Component: 650 - total flux cleaned = -0.00376053 Jy ! Component: 700 - total flux cleaned = -0.00390699 Jy ! Component: 750 - total flux cleaned = -0.00404967 Jy ! Component: 800 - total flux cleaned = -0.00409544 Jy ! Component: 850 - total flux cleaned = -0.00409558 Jy ! Component: 900 - total flux cleaned = -0.00422492 Jy ! Component: 950 - total flux cleaned = -0.00418144 Jy ! Component: 1000 - total flux cleaned = -0.00409779 Jy ! Component: 1050 - total flux cleaned = -0.00389488 Jy ! Component: 1100 - total flux cleaned = -0.00365708 Jy ! Component: 1150 - total flux cleaned = -0.00354052 Jy ! Component: 1200 - total flux cleaned = -0.00346422 Jy ! Component: 1250 - total flux cleaned = -0.00335168 Jy ! Component: 1300 - total flux cleaned = -0.00309307 Jy ! Component: 1350 - total flux cleaned = -0.00283899 Jy ! Component: 1400 - total flux cleaned = -0.00265969 Jy ! Component: 1450 - total flux cleaned = -0.00237688 Jy ! Component: 1500 - total flux cleaned = -0.0021682 Jy ! Component: 1550 - total flux cleaned = -0.00203099 Jy ! Component: 1600 - total flux cleaned = -0.00172556 Jy ! Component: 1650 - total flux cleaned = -0.0015245 Jy ! Component: 1700 - total flux cleaned = -0.00129292 Jy ! Component: 1750 - total flux cleaned = -0.00103178 Jy ! Component: 1800 - total flux cleaned = -0.000870569 Jy ! Component: 1850 - total flux cleaned = -0.000646846 Jy ! Component: 1900 - total flux cleaned = -0.000425422 Jy ! Component: 1950 - total flux cleaned = -0.000268328 Jy ! Component: 2000 - total flux cleaned = -4.96806e-05 Jy ! Component: 2050 - total flux cleaned = 0.000167391 Jy ! Component: 2100 - total flux cleaned = 0.00038324 Jy ! Component: 2150 - total flux cleaned = 0.000536448 Jy ! Component: 2200 - total flux cleaned = 0.000780493 Jy ! Component: 2250 - total flux cleaned = 0.00102339 Jy ! Component: 2300 - total flux cleaned = 0.00132525 Jy ! Component: 2350 - total flux cleaned = 0.00147561 Jy ! Component: 2400 - total flux cleaned = 0.00159556 Jy ! Component: 2450 - total flux cleaned = 0.00171504 Jy ! Component: 2500 - total flux cleaned = 0.00189384 Jy ! Component: 2550 - total flux cleaned = 0.00201254 Jy ! Component: 2600 - total flux cleaned = 0.00216094 Jy ! Component: 2650 - total flux cleaned = 0.00227926 Jy ! Component: 2700 - total flux cleaned = 0.00239779 Jy ! Component: 2750 - total flux cleaned = 0.00251617 Jy ! Component: 2800 - total flux cleaned = 0.00266421 Jy ! Component: 2850 - total flux cleaned = 0.00281258 Jy ! Component: 2900 - total flux cleaned = 0.00305074 Jy ! Component: 2950 - total flux cleaned = 0.00331925 Jy ! Component: 3000 - total flux cleaned = 0.00352857 Jy ! Component: 3050 - total flux cleaned = 0.00376848 Jy ! Component: 3100 - total flux cleaned = 0.00397938 Jy ! Component: 3150 - total flux cleaned = 0.0042212 Jy ! Component: 3200 - total flux cleaned = 0.00437302 Jy ! Component: 3250 - total flux cleaned = 0.00458633 Jy ! Component: 3300 - total flux cleaned = 0.00477028 Jy ! Component: 3350 - total flux cleaned = 0.00498608 Jy ! Component: 3400 - total flux cleaned = 0.00507889 Jy ! Component: 3450 - total flux cleaned = 0.00532786 Jy ! Component: 3500 - total flux cleaned = 0.00554675 Jy ! Component: 3550 - total flux cleaned = 0.00576715 Jy ! Component: 3600 - total flux cleaned = 0.00589379 Jy ! Component: 3650 - total flux cleaned = 0.00614875 Jy ! Component: 3700 - total flux cleaned = 0.00637305 Jy ! Component: 3750 - total flux cleaned = 0.0065669 Jy ! Component: 3800 - total flux cleaned = 0.00679408 Jy ! Component: 3850 - total flux cleaned = 0.00692448 Jy ! Component: 3900 - total flux cleaned = 0.00722012 Jy ! Component: 3950 - total flux cleaned = 0.00738572 Jy ! Component: 4000 - total flux cleaned = 0.00758565 Jy ! Component: 4050 - total flux cleaned = 0.00778698 Jy ! Total flux subtracted in 4096 components = 0.00802371 Jy ! Clean residual min=-0.002103 max=0.002067 Jy/beam ! Clean residual mean=-0.000016 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 1.26903 Jy keep ! Adding 186 model components to the UV plane model. ! The established model now contains 289 components and 1.26903 Jy ![Exited script file: muppet] wmap "J1147-3812_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.714 x 7.607 at 4.431 degrees (North through East) ! Clean map min=-0.0053132 max=1.0339 Jy/beam ! Writing clean map to FITS file: J1147-3812_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.03391 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00064784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.187978 0.187978 0.375956 0.751912 1.50382 3.00765 6.0153 12.0306 24.0612 48.1224 96.2447 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.033 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.714 x 7.607 at 4.431 degrees (North through East) ! Clean map min=-0.0053132 max=1.0339 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1147-3812_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:52:11 2019