! Started logfile: J1147-0724_S_2017_07_16_pus_uvs.log on Thu May 9 11:08:15 2019 obs J1147-0724_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1147-0724_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551111 visibilities/baseline/integration-bin. ! Found source: J1147-0724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1147-0724_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.308864Jy sigma=0.002454 ! Fit after self-cal, rms=0.273653Jy sigma=0.002153 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=7.214 mas, bpa=-8.255 degrees ! Estimated noise=3554.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.683491 Jy ! Component: 100 - total flux cleaned = 0.900853 Jy ! Total flux subtracted in 100 components = 0.900853 Jy ! Clean residual min=-0.065301 max=0.127682 Jy/beam ! Clean residual mean=-0.000237 rms=0.021245 Jy/beam ! Combined flux in latest and established models = 0.900853 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.900853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223282Jy sigma=0.001816 ! Fit after self-cal, rms=0.223259Jy sigma=0.001816 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=7.665 mas, bpa=-6.154 degrees ! Estimated noise=3123.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13767 Jy ! Component: 100 - total flux cleaned = 0.210299 Jy ! Component: 150 - total flux cleaned = 0.249906 Jy ! Component: 200 - total flux cleaned = 0.2723 Jy ! Total flux subtracted in 200 components = 0.2723 Jy ! Clean residual min=-0.034446 max=0.025917 Jy/beam ! Clean residual mean=0.000028 rms=0.006675 Jy/beam ! Combined flux in latest and established models = 1.17315 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 1.17315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118237Jy sigma=0.000942 ! Fit after self-cal, rms=0.118182Jy sigma=0.000942 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 1.03 ! LA 1.03 MK 1.27 NL 0.89 OV 1.02 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 0.99 ! LA 0.98 MK 1.07 NL 1.02 OV 1.04 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 0.99 ! LA 1.00 MK 0.94 NL 0.96 OV 0.95 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.118182Jy sigma=0.000942 ! Fit after self-cal, rms=0.091972Jy sigma=0.000724 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=7.612 mas, bpa=-5.526 degrees ! Estimated noise=3167.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00350872 Jy ! Component: 100 - total flux cleaned = -0.0043274 Jy ! Component: 150 - total flux cleaned = -0.00433752 Jy ! Component: 200 - total flux cleaned = -0.00378659 Jy ! Total flux subtracted in 200 components = -0.00378659 Jy ! Clean residual min=-0.015985 max=0.014535 Jy/beam ! Clean residual mean=0.000019 rms=0.003662 Jy/beam ! Combined flux in latest and established models = 1.16937 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 1.16937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090447Jy sigma=0.000713 ! Fit after self-cal, rms=0.090425Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090425Jy sigma=0.000713 ! Fit after self-cal, rms=0.090658Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=7.624 mas, bpa=-5.329 degrees ! Estimated noise=3171.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00241554 Jy ! Component: 100 - total flux cleaned = -0.00301908 Jy ! Component: 150 - total flux cleaned = -0.00303699 Jy ! Component: 200 - total flux cleaned = -0.00277359 Jy ! Total flux subtracted in 200 components = -0.00277359 Jy ! Clean residual min=-0.014683 max=0.014089 Jy/beam ! Clean residual mean=0.000020 rms=0.003456 Jy/beam ! Combined flux in latest and established models = 1.16659 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 1.16659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089865Jy sigma=0.000706 ! Fit after self-cal, rms=0.089855Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551058 Jy ! Component: 100 - total flux cleaned = 0.000545497 Jy ! Component: 150 - total flux cleaned = 0.000546036 Jy ! Component: 200 - total flux cleaned = 0.000547927 Jy ! Total flux subtracted in 200 components = 0.000547927 Jy ! Clean residual min=-0.014446 max=0.013730 Jy/beam ! Clean residual mean=0.000021 rms=0.003419 Jy/beam ! Combined flux in latest and established models = 1.16714 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 1.16714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089602Jy sigma=0.000704 ! Fit after self-cal, rms=0.089593Jy sigma=0.000704 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089593Jy sigma=0.000704 ! Fit after self-cal, rms=0.089831Jy sigma=0.000703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=7.633 mas, bpa=-5.142 degrees ! Estimated noise=3175.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00211215 Jy ! Component: 100 - total flux cleaned = -0.00262624 Jy ! Component: 150 - total flux cleaned = -0.00294628 Jy ! Component: 200 - total flux cleaned = -0.00322258 Jy ! Total flux subtracted in 200 components = -0.00322258 Jy ! Clean residual min=-0.013231 max=0.013390 Jy/beam ! Clean residual mean=0.000022 rms=0.003287 Jy/beam ! Combined flux in latest and established models = 1.16392 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 1.16392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089480Jy sigma=0.000700 ! Fit after self-cal, rms=0.089479Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.89636e-06 Jy ! Component: 100 - total flux cleaned = -8.44959e-05 Jy ! Component: 150 - total flux cleaned = -1.14533e-05 Jy ! Component: 200 - total flux cleaned = -8.1109e-05 Jy ! Total flux subtracted in 200 components = -8.1109e-05 Jy ! Clean residual min=-0.013149 max=0.013126 Jy/beam ! Clean residual mean=0.000022 rms=0.003265 Jy/beam ! Combined flux in latest and established models = 1.16384 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 1.16384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089359Jy sigma=0.000700 ! Fit after self-cal, rms=0.089357Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089357Jy sigma=0.000700 ! Fit after self-cal, rms=0.089598Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.483 mas, bmaj=13.65 mas, bpa=-11.97 degrees ! Estimated noise=4198.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00573807 Jy ! Component: 100 - total flux cleaned = -0.00663467 Jy ! Component: 150 - total flux cleaned = -0.00678551 Jy ! Component: 200 - total flux cleaned = -0.00678586 Jy ! Total flux subtracted in 200 components = -0.00678586 Jy ! Clean residual min=-0.012230 max=0.010114 Jy/beam ! Clean residual mean=0.000051 rms=0.003347 Jy/beam ! Combined flux in latest and established models = 1.15705 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 1.15705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089793Jy sigma=0.000699 ! Fit after self-cal, rms=0.089763Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000382505 Jy ! Component: 100 - total flux cleaned = -0.000438634 Jy ! Component: 150 - total flux cleaned = -0.000431784 Jy ! Component: 200 - total flux cleaned = -0.000426971 Jy ! Total flux subtracted in 200 components = -0.000426971 Jy ! Clean residual min=-0.011842 max=0.010095 Jy/beam ! Clean residual mean=0.000051 rms=0.003309 Jy/beam ! Combined flux in latest and established models = 1.15662 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 65 components and 1.15662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089944Jy sigma=0.000699 ! Fit after self-cal, rms=0.089929Jy sigma=0.000699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=7.641 mas, bpa=-4.985 degrees ! Estimated noise=3179.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.163 x 7.641 at -4.985 degrees (North through East) ! Clean map min=-0.011322 max=0.90545 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089929Jy sigma=0.000699 ! Fit after self-cal, rms=0.081141Jy sigma=0.000631 ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=7.636 mas, bpa=-4.861 degrees ! Estimated noise=3175.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148209 Jy ! Component: 100 - total flux cleaned = -0.00148608 Jy ! Component: 150 - total flux cleaned = -0.00148435 Jy ! Component: 200 - total flux cleaned = -0.00136385 Jy ! Total flux subtracted in 200 components = -0.00136385 Jy ! Clean residual min=-0.011018 max=0.012861 Jy/beam ! Clean residual mean=0.000026 rms=0.002989 Jy/beam ! Combined flux in latest and established models = 1.15526 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 69 components and 1.15526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080658Jy sigma=0.000629 ! Fit after self-cal, rms=0.080654Jy sigma=0.000629 ! Inverting map ! Added new window around map position (8, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0056758 Jy ! Component: 100 - total flux cleaned = 0.00718081 Jy ! Component: 150 - total flux cleaned = 0.00824755 Jy ! Component: 200 - total flux cleaned = 0.00915301 Jy ! Total flux subtracted in 200 components = 0.00915301 Jy ! Clean residual min=-0.010496 max=0.008309 Jy/beam ! Clean residual mean=0.000016 rms=0.002320 Jy/beam ! Combined flux in latest and established models = 1.16441 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 1.16441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078229Jy sigma=0.000612 ! Fit after self-cal, rms=0.078143Jy sigma=0.000612 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078143Jy sigma=0.000612 ! Fit after self-cal, rms=0.078120Jy sigma=0.000610 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.116 mas, bpa=-7.028 degrees ! Estimated noise=3607.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.682485 Jy ! Component: 100 - total flux cleaned = 0.88947 Jy ! Component: 150 - total flux cleaned = 0.999107 Jy ! Component: 200 - total flux cleaned = 1.06175 Jy ! Total flux subtracted in 200 components = 1.06175 Jy ! Clean residual min=-0.022253 max=0.040637 Jy/beam ! Clean residual mean=-0.000071 rms=0.007035 Jy/beam ! Combined flux in latest and established models = 1.06175 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.06175 Jy ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=7.643 mas, bpa=-4.823 degrees ! Estimated noise=3174.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441666 Jy ! Component: 100 - total flux cleaned = 0.0670758 Jy ! Component: 150 - total flux cleaned = 0.0805215 Jy ! Component: 200 - total flux cleaned = 0.089437 Jy ! Total flux subtracted in 200 components = 0.089437 Jy ! Clean residual min=-0.012094 max=0.010564 Jy/beam ! Clean residual mean=0.000011 rms=0.002714 Jy/beam ! Combined flux in latest and established models = 1.15119 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 51 components and 1.15119 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.491 mas, bmaj=13.65 mas, bpa=-11.89 degrees ! Estimated noise=4184.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054358 Jy ! Component: 100 - total flux cleaned = 0.00779924 Jy ! Component: 150 - total flux cleaned = 0.00942691 Jy ! Component: 200 - total flux cleaned = 0.0100407 Jy ! Total flux subtracted in 200 components = 0.0100407 Jy ! Clean residual min=-0.009500 max=0.006751 Jy/beam ! Clean residual mean=0.000021 rms=0.002378 Jy/beam ! Combined flux in latest and established models = 1.16123 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432918 Jy ! Component: 100 - total flux cleaned = 0.000723086 Jy ! Component: 150 - total flux cleaned = 0.000904123 Jy ! Component: 200 - total flux cleaned = 0.00107221 Jy ! Total flux subtracted in 200 components = 0.00107221 Jy ! Clean residual min=-0.009021 max=0.006756 Jy/beam ! Clean residual mean=0.000018 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 1.1623 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 74 components and 1.1623 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=7.643 mas, bpa=-4.823 degrees ! Estimated noise=3174.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596754 Jy ! Component: 100 - total flux cleaned = 0.000778451 Jy ! Component: 150 - total flux cleaned = 0.000944211 Jy ! Component: 200 - total flux cleaned = 0.00139331 Jy ! Total flux subtracted in 200 components = 0.00139331 Jy ! Clean residual min=-0.008814 max=0.007683 Jy/beam ! Clean residual mean=0.000004 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 1.16369 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 1.16369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077504Jy sigma=0.000606 ! Fit after self-cal, rms=0.077477Jy sigma=0.000606 wmodel J1147-0724_S_2017_07_16_pus_map.mod ! Writing 91 model components to file: J1147-0724_S_2017_07_16_pus_map.mod wobs J1147-0724_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1147-0724_S_2017_07_16_pus_uvs.fits wwins J1147-0724_S_2017_07_16_pus_map.win ! wwins: Wrote 3 windows to J1147-0724_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245748 Jy ! Component: 100 - total flux cleaned = -0.00320929 Jy ! Component: 150 - total flux cleaned = -0.00366646 Jy ! Component: 200 - total flux cleaned = -0.00429156 Jy ! Component: 250 - total flux cleaned = -0.00419553 Jy ! Component: 300 - total flux cleaned = -0.00428984 Jy ! Component: 350 - total flux cleaned = -0.00437695 Jy ! Component: 400 - total flux cleaned = -0.00429057 Jy ! Component: 450 - total flux cleaned = -0.00420943 Jy ! Component: 500 - total flux cleaned = -0.00397764 Jy ! Component: 550 - total flux cleaned = -0.00375149 Jy ! Component: 600 - total flux cleaned = -0.00367787 Jy ! Component: 650 - total flux cleaned = -0.00346194 Jy ! Component: 700 - total flux cleaned = -0.00304479 Jy ! Component: 750 - total flux cleaned = -0.00277341 Jy ! Component: 800 - total flux cleaned = -0.0024408 Jy ! Component: 850 - total flux cleaned = -0.00218015 Jy ! Component: 900 - total flux cleaned = -0.00192482 Jy ! Component: 950 - total flux cleaned = -0.00154984 Jy ! Component: 1000 - total flux cleaned = -0.00124339 Jy ! Component: 1050 - total flux cleaned = -0.00094261 Jy ! Component: 1100 - total flux cleaned = -0.000647062 Jy ! Component: 1150 - total flux cleaned = -0.00018233 Jy ! Component: 1200 - total flux cleaned = 4.62953e-05 Jy ! Component: 1250 - total flux cleaned = 0.000327672 Jy ! Component: 1300 - total flux cleaned = 0.000660271 Jy ! Component: 1350 - total flux cleaned = 0.000770129 Jy ! Component: 1400 - total flux cleaned = 0.000932179 Jy ! Component: 1450 - total flux cleaned = 0.00103923 Jy ! Component: 1500 - total flux cleaned = 0.00125145 Jy ! Component: 1550 - total flux cleaned = 0.00130409 Jy ! Component: 1600 - total flux cleaned = 0.00156439 Jy ! Component: 1650 - total flux cleaned = 0.00166777 Jy ! Component: 1700 - total flux cleaned = 0.00182131 Jy ! Component: 1750 - total flux cleaned = 0.00187236 Jy ! Component: 1800 - total flux cleaned = 0.00202396 Jy ! Component: 1850 - total flux cleaned = 0.00207417 Jy ! Component: 1900 - total flux cleaned = 0.00222373 Jy ! Component: 1950 - total flux cleaned = 0.00227304 Jy ! Component: 2000 - total flux cleaned = 0.00222399 Jy ! Component: 2050 - total flux cleaned = 0.00207713 Jy ! Component: 2100 - total flux cleaned = 0.00212586 Jy ! Component: 2150 - total flux cleaned = 0.00198009 Jy ! Component: 2200 - total flux cleaned = 0.00193172 Jy ! Component: 2250 - total flux cleaned = 0.00178717 Jy ! Component: 2300 - total flux cleaned = 0.00178695 Jy ! Component: 2350 - total flux cleaned = 0.00164315 Jy ! Component: 2400 - total flux cleaned = 0.0016432 Jy ! Component: 2450 - total flux cleaned = 0.00159547 Jy ! Component: 2500 - total flux cleaned = 0.00164278 Jy ! Component: 2550 - total flux cleaned = 0.00164273 Jy ! Component: 2600 - total flux cleaned = 0.0017854 Jy ! Component: 2650 - total flux cleaned = 0.00178535 Jy ! Component: 2700 - total flux cleaned = 0.00197528 Jy ! Component: 2750 - total flux cleaned = 0.00197526 Jy ! Component: 2800 - total flux cleaned = 0.00202267 Jy ! Component: 2850 - total flux cleaned = 0.00207021 Jy ! Component: 2900 - total flux cleaned = 0.00221317 Jy ! Component: 2950 - total flux cleaned = 0.00226098 Jy ! Component: 3000 - total flux cleaned = 0.00235666 Jy ! Component: 3050 - total flux cleaned = 0.00245213 Jy ! Component: 3100 - total flux cleaned = 0.00245221 Jy ! Component: 3150 - total flux cleaned = 0.00250017 Jy ! Component: 3200 - total flux cleaned = 0.00250006 Jy ! Component: 3250 - total flux cleaned = 0.00235553 Jy ! Component: 3300 - total flux cleaned = 0.00240335 Jy ! Component: 3350 - total flux cleaned = 0.00235521 Jy ! Component: 3400 - total flux cleaned = 0.00216174 Jy ! Component: 3450 - total flux cleaned = 0.00201586 Jy ! Component: 3500 - total flux cleaned = 0.00182059 Jy ! Component: 3550 - total flux cleaned = 0.00162428 Jy ! Component: 3600 - total flux cleaned = 0.00142603 Jy ! Component: 3650 - total flux cleaned = 0.00122625 Jy ! Component: 3700 - total flux cleaned = 0.00102496 Jy ! Component: 3750 - total flux cleaned = 0.000822289 Jy ! Component: 3800 - total flux cleaned = 0.000566219 Jy ! Component: 3850 - total flux cleaned = 0.000359739 Jy ! Component: 3900 - total flux cleaned = 4.70102e-05 Jy ! Component: 3950 - total flux cleaned = -0.000163819 Jy ! Component: 4000 - total flux cleaned = -0.000429166 Jy ! Component: 4050 - total flux cleaned = -0.000750508 Jy ! Total flux subtracted in 4096 components = -0.000912456 Jy ! Clean residual min=-0.003466 max=0.003429 Jy/beam ! Clean residual mean=0.000005 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 1.16278 Jy keep ! Adding 193 model components to the UV plane model. ! The established model now contains 284 components and 1.16278 Jy ![Exited script file: muppet] wmap "J1147-0724_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 7.643 at -4.823 degrees (North through East) ! Clean map min=-0.0058105 max=0.9024 Jy/beam ! Writing clean map to FITS file: J1147-0724_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.902396 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000854023 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.283919 0.283919 0.567837 1.13567 2.27135 4.5427 9.0854 18.1708 36.3416 72.6832 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.902 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 7.643 at -4.823 degrees (North through East) ! Clean map min=-0.0058105 max=0.9024 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1147-0724_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:08:20 2019