! Started logfile: J1146-3328_S_2017_01_21_pus_uvs.log on Sun May 5 15:54:01 2019 obs J1146-3328_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1146-3328_S_2017_01_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.655797 visibilities/baseline/integration-bin. ! Found source: J1146-3328 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 10860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1146-3328_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 462 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.935893Jy sigma=0.004887 ! Fit after self-cal, rms=0.890912Jy sigma=0.004688 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=6.313 mas, bpa=-2.576 degrees ! Estimated noise=2798.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0908353 Jy ! Component: 100 - total flux cleaned = 0.111797 Jy ! Total flux subtracted in 100 components = 0.111797 Jy ! Clean residual min=-0.010294 max=0.013036 Jy/beam ! Clean residual mean=-0.000070 rms=0.002400 Jy/beam ! Combined flux in latest and established models = 0.111797 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.111797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142011Jy sigma=0.000656 ! Fit after self-cal, rms=0.141887Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=8.686 mas, bpa=4.324 degrees ! Estimated noise=1428.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127186 Jy ! Component: 100 - total flux cleaned = 0.0187454 Jy ! Component: 150 - total flux cleaned = 0.0219784 Jy ! Component: 200 - total flux cleaned = 0.0226574 Jy ! Total flux subtracted in 200 components = 0.0226574 Jy ! Clean residual min=-0.005561 max=0.006551 Jy/beam ! Clean residual mean=-0.000013 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.134455 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 21 components and 0.134455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140978Jy sigma=0.000648 ! Fit after self-cal, rms=0.140981Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.24 LA 1.01 ! MK 0.99 NL 0.99 OV 1.02 PT 1.00 ! SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.37 LA 0.98 ! MK 0.96 NL 0.99 OV 1.00 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.32 LA 0.94 ! MK 1.07 NL 1.01 OV 0.90 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 0.94 LA 1.12 ! MK 0.91 NL 1.00* OV 0.93 PT 0.98 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.140981Jy sigma=0.000648 ! Fit after self-cal, rms=0.148812Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.902 mas, bmaj=8.577 mas, bpa=4.94 degrees ! Estimated noise=1412.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113898 Jy ! Component: 100 - total flux cleaned = 0.00113996 Jy ! Component: 150 - total flux cleaned = 0.000997612 Jy ! Component: 200 - total flux cleaned = 0.000875795 Jy ! Total flux subtracted in 200 components = 0.000875795 Jy ! Clean residual min=-0.004240 max=0.005221 Jy/beam ! Clean residual mean=0.000019 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.135331 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.135331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148725Jy sigma=0.000644 ! Fit after self-cal, rms=0.149059Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149059Jy sigma=0.000644 ! Fit after self-cal, rms=0.156903Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=8.542 mas, bpa=5.029 degrees ! Estimated noise=1422.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011208 Jy ! Component: 100 - total flux cleaned = 0.00107369 Jy ! Component: 150 - total flux cleaned = 0.00107418 Jy ! Component: 200 - total flux cleaned = 0.00100744 Jy ! Total flux subtracted in 200 components = 0.00100744 Jy ! Clean residual min=-0.003674 max=0.005164 Jy/beam ! Clean residual mean=0.000015 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.136338 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.136338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156877Jy sigma=0.000642 ! Fit after self-cal, rms=0.157021Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189775 Jy ! Component: 100 - total flux cleaned = 0.00168858 Jy ! Component: 150 - total flux cleaned = 0.0012742 Jy ! Component: 200 - total flux cleaned = 0.00105748 Jy ! Total flux subtracted in 200 components = 0.00105748 Jy ! Clean residual min=-0.003198 max=0.003509 Jy/beam ! Clean residual mean=0.000015 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.137396 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.137396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156786Jy sigma=0.000641 ! Fit after self-cal, rms=0.156739Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156739Jy sigma=0.000641 ! Fit after self-cal, rms=0.161815Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=8.489 mas, bpa=5.064 degrees ! Estimated noise=1418.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625236 Jy ! Component: 100 - total flux cleaned = 0.000262758 Jy ! Component: 150 - total flux cleaned = 0.000258367 Jy ! Component: 200 - total flux cleaned = 0.00025507 Jy ! Total flux subtracted in 200 components = 0.00025507 Jy ! Clean residual min=-0.003050 max=0.003284 Jy/beam ! Clean residual mean=0.000009 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.137651 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 0.137651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161721Jy sigma=0.000640 ! Fit after self-cal, rms=0.161799Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234613 Jy ! Component: 100 - total flux cleaned = -0.000444455 Jy ! Component: 150 - total flux cleaned = -0.000541196 Jy ! Component: 200 - total flux cleaned = -0.000584659 Jy ! Total flux subtracted in 200 components = -0.000584659 Jy ! Clean residual min=-0.002971 max=0.003334 Jy/beam ! Clean residual mean=0.000007 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.137066 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.137066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161746Jy sigma=0.000640 ! Fit after self-cal, rms=0.161736Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161736Jy sigma=0.000640 ! Fit after self-cal, rms=0.162624Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.085 mas, bmaj=20.99 mas, bpa=5.375 degrees ! Estimated noise=1865.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817609 Jy ! Component: 100 - total flux cleaned = 0.00101537 Jy ! Component: 150 - total flux cleaned = 0.00108178 Jy ! Component: 200 - total flux cleaned = 0.00117168 Jy ! Total flux subtracted in 200 components = 0.00117168 Jy ! Clean residual min=-0.003264 max=0.003777 Jy/beam ! Clean residual mean=0.000025 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.138238 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.138238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162617Jy sigma=0.000640 ! Fit after self-cal, rms=0.162664Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.31022e-05 Jy ! Component: 100 - total flux cleaned = 0.000128369 Jy ! Component: 150 - total flux cleaned = 0.000216031 Jy ! Component: 200 - total flux cleaned = 0.000297195 Jy ! Total flux subtracted in 200 components = 0.000297195 Jy ! Clean residual min=-0.003259 max=0.003777 Jy/beam ! Clean residual mean=0.000025 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.138535 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.138535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162660Jy sigma=0.000640 ! Fit after self-cal, rms=0.162669Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=8.478 mas, bpa=5.098 degrees ! Estimated noise=1417.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.884 x 8.478 at 5.098 degrees (North through East) ! Clean map min=-0.0055496 max=0.11694 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.289 mas, bmaj=6.04 mas, bpa=-2.71 degrees ! Estimated noise=2723.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0873623 Jy ! Component: 100 - total flux cleaned = 0.111175 Jy ! Component: 150 - total flux cleaned = 0.123826 Jy ! Component: 200 - total flux cleaned = 0.129649 Jy ! Total flux subtracted in 200 components = 0.129649 Jy ! Clean residual min=-0.006952 max=0.006938 Jy/beam ! Clean residual mean=-0.000029 rms=0.001719 Jy/beam ! Combined flux in latest and established models = 0.129649 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.129649 Jy ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=8.478 mas, bpa=5.098 degrees ! Estimated noise=1417.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459072 Jy ! Component: 100 - total flux cleaned = 0.00483646 Jy ! Component: 150 - total flux cleaned = 0.00496364 Jy ! Component: 200 - total flux cleaned = 0.00507101 Jy ! Total flux subtracted in 200 components = 0.00507101 Jy ! Clean residual min=-0.003390 max=0.003396 Jy/beam ! Clean residual mean=-0.000009 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.13472 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.13472 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.085 mas, bmaj=20.99 mas, bpa=5.375 degrees ! Estimated noise=1865.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192077 Jy ! Component: 100 - total flux cleaned = 0.00243039 Jy ! Component: 150 - total flux cleaned = 0.00282665 Jy ! Component: 200 - total flux cleaned = 0.00305415 Jy ! Total flux subtracted in 200 components = 0.00305415 Jy ! Clean residual min=-0.003294 max=0.003606 Jy/beam ! Clean residual mean=0.000017 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.137774 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.12169e-05 Jy ! Component: 100 - total flux cleaned = 7.87623e-05 Jy ! Component: 150 - total flux cleaned = 0.00011427 Jy ! Component: 200 - total flux cleaned = 0.00014578 Jy ! Total flux subtracted in 200 components = 0.00014578 Jy ! Clean residual min=-0.003264 max=0.003679 Jy/beam ! Clean residual mean=0.000018 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.13792 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 63 components and 0.13792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.884 mas, bmaj=8.478 mas, bpa=5.098 degrees ! Estimated noise=1417.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000725962 Jy ! Component: 100 - total flux cleaned = -0.000868576 Jy ! Component: 150 - total flux cleaned = -0.000808913 Jy ! Component: 200 - total flux cleaned = -0.000707174 Jy ! Total flux subtracted in 200 components = -0.000707174 Jy ! Clean residual min=-0.003012 max=0.003396 Jy/beam ! Clean residual mean=0.000007 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.137213 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.137213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162675Jy sigma=0.000640 ! Fit after self-cal, rms=0.162623Jy sigma=0.000640 wmodel J1146-3328_S_2017_01_21_pus_map.mod ! Writing 79 model components to file: J1146-3328_S_2017_01_21_pus_map.mod wobs J1146-3328_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1146-3328_S_2017_01_21_pus_uvs.fits wwins J1146-3328_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1146-3328_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725225 Jy ! Component: 100 - total flux cleaned = 0.00109975 Jy ! Component: 150 - total flux cleaned = 0.00115054 Jy ! Component: 200 - total flux cleaned = 0.00124685 Jy ! Component: 250 - total flux cleaned = 0.00133754 Jy ! Component: 300 - total flux cleaned = 0.00124842 Jy ! Component: 350 - total flux cleaned = 0.00111846 Jy ! Component: 400 - total flux cleaned = 0.00111901 Jy ! Component: 450 - total flux cleaned = 0.000995227 Jy ! Component: 500 - total flux cleaned = 0.000995401 Jy ! Component: 550 - total flux cleaned = 0.000994899 Jy ! Component: 600 - total flux cleaned = 0.000994109 Jy ! Component: 650 - total flux cleaned = 0.000957816 Jy ! Component: 700 - total flux cleaned = 0.000957636 Jy ! Component: 750 - total flux cleaned = 0.000816199 Jy ! Component: 800 - total flux cleaned = 0.000851021 Jy ! Component: 850 - total flux cleaned = 0.000714825 Jy ! Component: 900 - total flux cleaned = 0.000614737 Jy ! Component: 950 - total flux cleaned = 0.000417306 Jy ! Component: 1000 - total flux cleaned = 0.000255948 Jy ! Component: 1050 - total flux cleaned = 6.49825e-05 Jy ! Component: 1100 - total flux cleaned = -9.20713e-05 Jy ! Component: 1150 - total flux cleaned = -0.000339026 Jy ! Component: 1200 - total flux cleaned = -0.000673675 Jy ! Component: 1250 - total flux cleaned = -0.000883296 Jy ! Component: 1300 - total flux cleaned = -0.000943085 Jy ! Component: 1350 - total flux cleaned = -0.00123439 Jy ! Component: 1400 - total flux cleaned = -0.00132062 Jy ! Component: 1450 - total flux cleaned = -0.00154695 Jy ! Component: 1500 - total flux cleaned = -0.00176997 Jy ! Component: 1550 - total flux cleaned = -0.00188016 Jy ! Component: 1600 - total flux cleaned = -0.00204362 Jy ! Component: 1650 - total flux cleaned = -0.0022856 Jy ! Component: 1700 - total flux cleaned = -0.00239164 Jy ! Component: 1750 - total flux cleaned = -0.00252295 Jy ! Component: 1800 - total flux cleaned = -0.00265254 Jy ! Component: 1850 - total flux cleaned = -0.00272941 Jy ! Component: 1900 - total flux cleaned = -0.00278017 Jy ! Component: 1950 - total flux cleaned = -0.00293074 Jy ! Component: 2000 - total flux cleaned = -0.00298039 Jy ! Component: 2050 - total flux cleaned = -0.00302926 Jy ! Component: 2100 - total flux cleaned = -0.00307758 Jy ! Component: 2150 - total flux cleaned = -0.0030777 Jy ! Component: 2200 - total flux cleaned = -0.0030778 Jy ! Component: 2250 - total flux cleaned = -0.0030782 Jy ! Component: 2300 - total flux cleaned = -0.0030782 Jy ! Component: 2350 - total flux cleaned = -0.003171 Jy ! Component: 2400 - total flux cleaned = -0.00314804 Jy ! Component: 2450 - total flux cleaned = -0.00319374 Jy ! Component: 2500 - total flux cleaned = -0.0032389 Jy ! Component: 2550 - total flux cleaned = -0.00326122 Jy ! Component: 2600 - total flux cleaned = -0.00334996 Jy ! Component: 2650 - total flux cleaned = -0.00341624 Jy ! Component: 2700 - total flux cleaned = -0.00348181 Jy ! Component: 2750 - total flux cleaned = -0.00354673 Jy ! Component: 2800 - total flux cleaned = -0.00356831 Jy ! Component: 2850 - total flux cleaned = -0.00361105 Jy ! Component: 2900 - total flux cleaned = -0.00363245 Jy ! Component: 2950 - total flux cleaned = -0.00369577 Jy ! Component: 3000 - total flux cleaned = -0.00373761 Jy ! Component: 3050 - total flux cleaned = -0.00379992 Jy ! Component: 3100 - total flux cleaned = -0.00386195 Jy ! Component: 3150 - total flux cleaned = -0.00394422 Jy ! Component: 3200 - total flux cleaned = -0.00396463 Jy ! Component: 3250 - total flux cleaned = -0.00398488 Jy ! Component: 3300 - total flux cleaned = -0.00402539 Jy ! Component: 3350 - total flux cleaned = -0.00412595 Jy ! Component: 3400 - total flux cleaned = -0.00418585 Jy ! Component: 3450 - total flux cleaned = -0.00424553 Jy ! Component: 3500 - total flux cleaned = -0.0042853 Jy ! Component: 3550 - total flux cleaned = -0.00438416 Jy ! Component: 3600 - total flux cleaned = -0.00444324 Jy ! Component: 3650 - total flux cleaned = -0.00460015 Jy ! Component: 3700 - total flux cleaned = -0.0046782 Jy ! Component: 3750 - total flux cleaned = -0.0047365 Jy ! Component: 3800 - total flux cleaned = -0.00477534 Jy ! Component: 3850 - total flux cleaned = -0.00483348 Jy ! Component: 3900 - total flux cleaned = -0.00491064 Jy ! Component: 3950 - total flux cleaned = -0.00498755 Jy ! Component: 4000 - total flux cleaned = -0.00504491 Jy ! Component: 4050 - total flux cleaned = -0.00512127 Jy ! Total flux subtracted in 4096 components = -0.00517832 Jy ! Clean residual min=-0.001085 max=0.001134 Jy/beam ! Clean residual mean=-0.000007 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.132035 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 351 components and 0.132035 Jy ![Exited script file: muppet] wmap "J1146-3328_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.884 x 8.478 at 5.098 degrees (North through East) ! Clean map min=-0.0055277 max=0.11661 Jy/beam ! Writing clean map to FITS file: J1146-3328_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324531 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.834908 0.834908 1.66982 3.33963 6.67927 13.3585 26.7171 53.4341 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.884 x 8.478 at 5.098 degrees (North through East) ! Clean map min=-0.0055277 max=0.11661 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1146-3328_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:54:06 2019