! Started logfile: J1145+1310_S_2017_10_09_pus_uvs.log on Sun May 12 13:11:26 2019 obs J1145+1310_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1145+1310_S_2017_10_09_pus_uva.fits ! AN table 1: 195 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.724074 visibilities/baseline/integration-bin. ! Found source: J1145+1310 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 20332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1145+1310_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 502 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1082 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003831Jy sigma=0.008823 ! Fit after self-cal, rms=0.959168Jy sigma=0.008445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.788 mas, bmaj=10.56 mas, bpa=-18.87 degrees ! Estimated noise=1288.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325923 Jy ! Component: 100 - total flux cleaned = 0.0389217 Jy ! Total flux subtracted in 100 components = 0.0389217 Jy ! Clean residual min=-0.003927 max=0.005104 Jy/beam ! Clean residual mean=0.000003 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.0389217 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0389217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078086Jy sigma=0.000629 ! Fit after self-cal, rms=0.076453Jy sigma=0.000614 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=11.52 mas, bpa=-17.74 degrees ! Estimated noise=674.712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549917 Jy ! Component: 100 - total flux cleaned = 0.00700133 Jy ! Component: 150 - total flux cleaned = 0.00696101 Jy ! Component: 200 - total flux cleaned = 0.00688946 Jy ! Total flux subtracted in 200 components = 0.00688946 Jy ! Clean residual min=-0.002080 max=0.002142 Jy/beam ! Clean residual mean=0.000004 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0458112 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.0458112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076014Jy sigma=0.000612 ! Fit after self-cal, rms=0.075973Jy sigma=0.000611 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 1.00 KP 0.93 ! LA 1.03 MK 1.07 NL 0.94 OV 1.00* ! PT 1.15 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.97 KP 0.94 ! LA 0.94 MK 1.03 NL 0.80 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 1.03 KP 0.90 ! LA 0.86 MK 1.06 NL 1.17 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 4. ! A total of 261 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.95 KP 1.00* ! LA 1.00* MK 0.72 NL 1.00* OV 1.00* ! PT 1.06 ! ! ! Fit before self-cal, rms=0.075973Jy sigma=0.000611 ! Fit after self-cal, rms=0.073256Jy sigma=0.000611 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.715 mas, bmaj=11.53 mas, bpa=-17.26 degrees ! Estimated noise=681.824 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55396e-05 Jy ! Component: 100 - total flux cleaned = 2.18728e-05 Jy ! Component: 150 - total flux cleaned = 4.06732e-05 Jy ! Component: 200 - total flux cleaned = 5.56245e-05 Jy ! Total flux subtracted in 200 components = 5.56245e-05 Jy ! Clean residual min=-0.001581 max=0.001490 Jy/beam ! Clean residual mean=0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0458668 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0458668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073244Jy sigma=0.000611 ! Fit after self-cal, rms=0.073103Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073103Jy sigma=0.000610 ! Fit after self-cal, rms=0.072246Jy sigma=0.000610 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.727 mas, bmaj=11.5 mas, bpa=-17.25 degrees ! Estimated noise=679.057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167653 Jy ! Component: 100 - total flux cleaned = -0.000112275 Jy ! Component: 150 - total flux cleaned = -0.000111536 Jy ! Component: 200 - total flux cleaned = -0.000111334 Jy ! Total flux subtracted in 200 components = -0.000111334 Jy ! Clean residual min=-0.001623 max=0.001464 Jy/beam ! Clean residual mean=0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.0457554 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0457554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072240Jy sigma=0.000610 ! Fit after self-cal, rms=0.072223Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243654 Jy ! Component: 100 - total flux cleaned = -0.000245571 Jy ! Component: 150 - total flux cleaned = -0.000245547 Jy ! Component: 200 - total flux cleaned = -0.000231069 Jy ! Total flux subtracted in 200 components = -0.000231069 Jy ! Clean residual min=-0.001666 max=0.001404 Jy/beam ! Clean residual mean=0.000002 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0455244 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0455244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072218Jy sigma=0.000609 ! Fit after self-cal, rms=0.072212Jy sigma=0.000609 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072212Jy sigma=0.000609 ! Fit after self-cal, rms=0.072598Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.726 mas, bmaj=11.5 mas, bpa=-17.23 degrees ! Estimated noise=683.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109675 Jy ! Component: 100 - total flux cleaned = -4.18516e-05 Jy ! Component: 150 - total flux cleaned = -5.11086e-06 Jy ! Component: 200 - total flux cleaned = 2.79284e-05 Jy ! Total flux subtracted in 200 components = 2.79284e-05 Jy ! Clean residual min=-0.001715 max=0.001490 Jy/beam ! Clean residual mean=0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0455523 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.0455523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072594Jy sigma=0.000609 ! Fit after self-cal, rms=0.072597Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209294 Jy ! Component: 100 - total flux cleaned = -0.00018988 Jy ! Component: 150 - total flux cleaned = -0.000149394 Jy ! Component: 200 - total flux cleaned = -0.000142384 Jy ! Total flux subtracted in 200 components = -0.000142384 Jy ! Clean residual min=-0.001695 max=0.001500 Jy/beam ! Clean residual mean=0.000002 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0454099 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.0454099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072594Jy sigma=0.000609 ! Fit after self-cal, rms=0.072590Jy sigma=0.000609 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072590Jy sigma=0.000609 ! Fit after self-cal, rms=0.072893Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.468 mas, bmaj=12.17 mas, bpa=-18.28 degrees ! Estimated noise=824.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318166 Jy ! Component: 100 - total flux cleaned = 0.000357999 Jy ! Component: 150 - total flux cleaned = 0.000371304 Jy ! Component: 200 - total flux cleaned = 0.000371385 Jy ! Total flux subtracted in 200 components = 0.000371385 Jy ! Clean residual min=-0.001618 max=0.001614 Jy/beam ! Clean residual mean=0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0457813 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.0457813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072892Jy sigma=0.000609 ! Fit after self-cal, rms=0.072892Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.74903e-06 Jy ! Component: 100 - total flux cleaned = 1.07948e-05 Jy ! Component: 150 - total flux cleaned = 1.64788e-05 Jy ! Component: 200 - total flux cleaned = 2.12135e-05 Jy ! Total flux subtracted in 200 components = 2.12135e-05 Jy ! Clean residual min=-0.001681 max=0.001590 Jy/beam ! Clean residual mean=0.000002 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0458025 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.0458025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072891Jy sigma=0.000609 ! Fit after self-cal, rms=0.072889Jy sigma=0.000609 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=11.49 mas, bpa=-17.21 degrees ! Estimated noise=685.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 11.49 at -17.21 degrees (North through East) ! Clean map min=-0.0035902 max=0.045854 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=10.48 mas, bpa=-18.56 degrees ! Estimated noise=1299.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346666 Jy ! Component: 100 - total flux cleaned = 0.039805 Jy ! Component: 150 - total flux cleaned = 0.0415055 Jy ! Component: 200 - total flux cleaned = 0.0425288 Jy ! Total flux subtracted in 200 components = 0.0425288 Jy ! Clean residual min=-0.002932 max=0.002928 Jy/beam ! Clean residual mean=-0.000001 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0425288 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0425288 Jy ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=11.49 mas, bpa=-17.21 degrees ! Estimated noise=685.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202186 Jy ! Component: 100 - total flux cleaned = 0.00276065 Jy ! Component: 150 - total flux cleaned = 0.00294818 Jy ! Component: 200 - total flux cleaned = 0.00302248 Jy ! Total flux subtracted in 200 components = 0.00302248 Jy ! Clean residual min=-0.001665 max=0.001593 Jy/beam ! Clean residual mean=0.000001 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0455513 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.0455513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.468 mas, bmaj=12.17 mas, bpa=-18.28 degrees ! Estimated noise=824.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123365 Jy ! Component: 100 - total flux cleaned = 0.000137465 Jy ! Component: 150 - total flux cleaned = 0.000150195 Jy ! Component: 200 - total flux cleaned = 0.000171504 Jy ! Total flux subtracted in 200 components = 0.000171504 Jy ! Clean residual min=-0.001756 max=0.001619 Jy/beam ! Clean residual mean=0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0457228 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.91869e-06 Jy ! Component: 100 - total flux cleaned = 3.2882e-05 Jy ! Component: 150 - total flux cleaned = 4.64481e-05 Jy ! Component: 200 - total flux cleaned = 5.86182e-05 Jy ! Total flux subtracted in 200 components = 5.86182e-05 Jy ! Clean residual min=-0.001731 max=0.001602 Jy/beam ! Clean residual mean=0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0457814 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.0457814 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.72 mas, bmaj=11.49 mas, bpa=-17.21 degrees ! Estimated noise=685.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000166648 Jy ! Component: 100 - total flux cleaned = -0.000120872 Jy ! Component: 150 - total flux cleaned = -0.000101716 Jy ! Component: 200 - total flux cleaned = -0.0001103 Jy ! Total flux subtracted in 200 components = -0.0001103 Jy ! Clean residual min=-0.001693 max=0.001515 Jy/beam ! Clean residual mean=0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0456711 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.0456711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072889Jy sigma=0.000609 ! Fit after self-cal, rms=0.072889Jy sigma=0.000609 wmodel J1145+1310_S_2017_10_09_pus_map.mod ! Writing 39 model components to file: J1145+1310_S_2017_10_09_pus_map.mod wobs J1145+1310_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1145+1310_S_2017_10_09_pus_uvs.fits wwins J1145+1310_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1145+1310_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230222 Jy ! Component: 100 - total flux cleaned = -9.69335e-05 Jy ! Component: 150 - total flux cleaned = -7.07662e-05 Jy ! Component: 200 - total flux cleaned = -9.34749e-05 Jy ! Component: 250 - total flux cleaned = -2.78566e-05 Jy ! Component: 300 - total flux cleaned = -2.81221e-05 Jy ! Component: 350 - total flux cleaned = -2.86244e-05 Jy ! Component: 400 - total flux cleaned = -2.94337e-05 Jy ! Component: 450 - total flux cleaned = 8.02208e-06 Jy ! Component: 500 - total flux cleaned = 6.23724e-05 Jy ! Component: 550 - total flux cleaned = 4.42973e-05 Jy ! Component: 600 - total flux cleaned = -6.88676e-06 Jy ! Component: 650 - total flux cleaned = 1.04247e-05 Jy ! Component: 700 - total flux cleaned = -6.12029e-06 Jy ! Component: 750 - total flux cleaned = -3.86461e-05 Jy ! Component: 800 - total flux cleaned = -0.000117192 Jy ! Component: 850 - total flux cleaned = -0.00013253 Jy ! Component: 900 - total flux cleaned = -0.000132476 Jy ! Component: 950 - total flux cleaned = -0.000162093 Jy ! Component: 1000 - total flux cleaned = -0.000176617 Jy ! Component: 1050 - total flux cleaned = -0.000176877 Jy ! Component: 1100 - total flux cleaned = -0.000190659 Jy ! Component: 1150 - total flux cleaned = -0.000190561 Jy ! Component: 1200 - total flux cleaned = -0.000150282 Jy ! Component: 1250 - total flux cleaned = -9.76614e-05 Jy ! Component: 1300 - total flux cleaned = -7.19684e-05 Jy ! Component: 1350 - total flux cleaned = -5.92466e-05 Jy ! Component: 1400 - total flux cleaned = -5.92185e-05 Jy ! Component: 1450 - total flux cleaned = 3.41351e-06 Jy ! Component: 1500 - total flux cleaned = 4.03113e-05 Jy ! Component: 1550 - total flux cleaned = 6.45382e-05 Jy ! Component: 1600 - total flux cleaned = 7.66595e-05 Jy ! Component: 1650 - total flux cleaned = 0.000124276 Jy ! Component: 1700 - total flux cleaned = 0.000124177 Jy ! Component: 1750 - total flux cleaned = 0.000135964 Jy ! Component: 1800 - total flux cleaned = 0.00020476 Jy ! Component: 1850 - total flux cleaned = 0.000227363 Jy ! Component: 1900 - total flux cleaned = 0.000249881 Jy ! Component: 1950 - total flux cleaned = 0.000294109 Jy ! Component: 2000 - total flux cleaned = 0.000326906 Jy ! Component: 2050 - total flux cleaned = 0.000359194 Jy ! Component: 2100 - total flux cleaned = 0.000369708 Jy ! Component: 2150 - total flux cleaned = 0.000369551 Jy ! Component: 2200 - total flux cleaned = 0.000390345 Jy ! Component: 2250 - total flux cleaned = 0.00042139 Jy ! Component: 2300 - total flux cleaned = 0.000441925 Jy ! Component: 2350 - total flux cleaned = 0.000431643 Jy ! Component: 2400 - total flux cleaned = 0.000471965 Jy ! Component: 2450 - total flux cleaned = 0.00051187 Jy ! Component: 2500 - total flux cleaned = 0.000492007 Jy ! Component: 2550 - total flux cleaned = 0.000590121 Jy ! Component: 2600 - total flux cleaned = 0.000599769 Jy ! Component: 2650 - total flux cleaned = 0.000628676 Jy ! Component: 2700 - total flux cleaned = 0.00067649 Jy ! Component: 2750 - total flux cleaned = 0.000695578 Jy ! Component: 2800 - total flux cleaned = 0.00073311 Jy ! Component: 2850 - total flux cleaned = 0.000751744 Jy ! Component: 2900 - total flux cleaned = 0.000760935 Jy ! Component: 2950 - total flux cleaned = 0.000788417 Jy ! Component: 3000 - total flux cleaned = 0.000833738 Jy ! Component: 3050 - total flux cleaned = 0.000842773 Jy ! Component: 3100 - total flux cleaned = 0.00088738 Jy ! Component: 3150 - total flux cleaned = 0.000905022 Jy ! Component: 3200 - total flux cleaned = 0.000966582 Jy ! Component: 3250 - total flux cleaned = 0.000966558 Jy ! Component: 3300 - total flux cleaned = 0.00101856 Jy ! Component: 3350 - total flux cleaned = 0.0010615 Jy ! Component: 3400 - total flux cleaned = 0.0010871 Jy ! Component: 3450 - total flux cleaned = 0.00113798 Jy ! Component: 3500 - total flux cleaned = 0.00115487 Jy ! Component: 3550 - total flux cleaned = 0.00119666 Jy ! Component: 3600 - total flux cleaned = 0.00123818 Jy ! Component: 3650 - total flux cleaned = 0.00127126 Jy ! Component: 3700 - total flux cleaned = 0.00131229 Jy ! Component: 3750 - total flux cleaned = 0.00135304 Jy ! Component: 3800 - total flux cleaned = 0.00138539 Jy ! Component: 3850 - total flux cleaned = 0.00142564 Jy ! Component: 3900 - total flux cleaned = 0.00146556 Jy ! Component: 3950 - total flux cleaned = 0.00151319 Jy ! Component: 4000 - total flux cleaned = 0.00155264 Jy ! Component: 4050 - total flux cleaned = 0.00156834 Jy ! Total flux subtracted in 4096 components = 0.0016152 Jy ! Clean residual min=-0.000617 max=0.000422 Jy/beam ! Clean residual mean=0.000000 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.0472863 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 328 components and 0.0472864 Jy ![Exited script file: muppet] wmap "J1145+1310_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 11.49 at -17.21 degrees (North through East) ! Clean map min=-0.0038363 max=0.045893 Jy/beam ! Writing clean map to FITS file: J1145+1310_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0458934 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141536 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.925204 0.925204 1.85041 3.70082 7.40163 14.8033 29.6065 59.2131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.72 x 11.49 at -17.21 degrees (North through East) ! Clean map min=-0.0038363 max=0.045893 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1145+1310_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:11:32 2019